160D110000-1_RE1_TBOM_5.pdf

PART NUMBER DASH NUMBER TOOL TYPE

MODEL

REV

DATE

160D110000 1 RE1 5 4/17/12

TOOL TRIMETRIC

DISTRIBUTION STATEMENT D. Distribution authorized to Department of Defense and U.S. DOD contractors only, for administrative and operational use. Date of determination is 29 June 2007. Refer other requests for this document to OO-ALC/508 ACSS/SU, Hill AFB, UT 84056.

DESTRUCTION NOTICE: For classified documents, follow the procedures in DOD 5220.22-M, Industrial Security Manual, Section 11-19 or DOD 5200.1-R, Information Security Program Regulation, Chapter IX. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751 et seq.) or Executive Order 12470.

Violations of these export laws are subject to severe criminal penalties.

Approximate Tool Size:

125” Tall 147” Wide 324” Long

Approximate Tool Weight:

11500 lbs.

REV

REVISION HISTORY

REV DESCRIPTION DESIGNER DATE APPROVED

- INITIAL RELEASE R. HOLDWICK 4/1/11 J. BUCHHEIT

TBOM

DET 2S (NOW) ¼ X 3 ¾ X 4

(WAS) ¼ X 4 X 5

DET 3S (NOW) ¼ X 3 ¾ X 4

(WAS) ¼ X 4 X 5

DET 43 QTY (WAS) 24 (NOW) 16

DET 100 (WAS) LG5G19-720B21000

(NOW) LG5GA9-720B21000

DET 101 (WAS) LG5G19-700B21000

(NOW) LG5GA9-700B21000

DET 187 (NOW) 91251A029

(WAS) 91251A227

DET 192 (NOW) P-96-16-1.3125

(WAS) P-96-16-1.3750

DET 216 (NOW) P-88-16-1.0000

(WAS) P-96-16-1.0000

DET 286 QTY (WAS) 10 (NOW) 8

DET 301 ADD

DET 302 ADD

DET 303 ADD

3D MODEL

DET 1 REVISED/ADDED WELD SYMBOLS

DET 1 (WAS) 2 X Φ1 ¼ (NOW) Φ2 & Φ1 1/4

DET 2 REVISED/ADDED WELD SYMBOLS

DET’S 2H, 2W, & 2T RELOCATED

DET 2 (WAS) 8¼ (NOW) 7 13/16

DET 2 (WAS) 10X Φ21/32 (NOW) 8X Φ21/32

DET 2 ADD TAP 5/8-11

DET 2 ADD 7.4 DIM

DET 2 (WAS) 2 X Φ1¼ (NOW) Φ2 & Φ1¼

DET 3 REVISED/ADDED WELD SYMBOLS

DET’S 3H, 3W, & 3T RELOCATED

DET 3 (WAS) 8 ¼ (NOW) 7 13/16

DET 3 (WAS) 10X Φ21/32 (NOW) 8X Φ21/32

R. HOLDWICK 8/31/11 J. BUCHHEIT

REV

DET 3 ADD TAP 5/8-11

DET 3 (WAS) Φ1¼ (NOW) Φ2

DET 17 GRAPHICS UPDATE ONLY

DET 18 GRAPHICS UPDATE ONLY

DET 100 GRAPHICS UPDATE ONLY

DET 101 GRAPHICS UPDATE ONLY

DET 176 REVISED/ADDED WELD SYMBOLS

DET 179 REVISED/ADDED WELD SYMBOLS

DET 184 GRAPHICS UPDATE ONLY

DET 188 (WAS) 1½ X 45° CHAMFER TYP

DET 188 (NOW) 2 X 45° CHAMFER & 3X 1½ X 45°

CHAMFER

DET 189 REVISE ATTACH PATTERN

DET 190 REVISE ATTACH PATTERN

DET 193 (WAS) 1½ X 45° CHAMFER TYP

DET 193 (NOW) 2 X 45° CHAMFER & 3X 1½ X 45°

CHAMFER

DET 193 (WAS) .162 (NOW) .140

DET 194 REVISE ATTACH PATTERN

DET 223 (WAS) 3X (NOW) 4X (2) PLCS

DET 232 REVISED TAB AND SLOT

DET 232 ADDED WELD SYMBOL

-9000 RELOCATED (4) OF 71 & (2) OF 72 AND ADD

LOCAL NOTE “PERMISSIBLE TO ADD FLATS …”

-9002 ADD DET 301

-9004 GRAPHICS UPDATE ONLY

-9005 GRAPHICS UPDATE ONLY

-9012 ADD DET 303

-9013 (REM) DET 43 (ADD) DET 302

-9014 (REM) DET 43 (ADD) DET 302

-9017 ADD DET 303

NOTES

NOTE 16 REVISED

THE FOLLOWING DEVIATION CHANGES APPLY TO

THE ORIGINAL TOOL (UNIT 1) ONLY:

TBOM:

ADD DET’S 304, 307, 309, 310, 330, 331, 332

R. HOLDWICK

B. MOORE

2/06/12

J. BUCHHEIT

C. RADFORD

REV

3D MODEL:

DET 1 REM DET 1BA (ORIG TOOL ONLY-

PERMISSIBLE TO RETAIN)

DET 26 (NOW) ORIG TOOL ONLY-PERMISSIBLE

TO SHIM BETWEEN DET1 AND DET 26 THE

COMBINED THICKNESS OF THE SPLINING

PLASTIC AND ½ THICK STOCK ADDED TO -9010

ASSY IN LIEU OF USING DET 333)

THE REMAINING CHANGES APPLY TO THE ORIGINAL

TOOL (UNIT 1) AND ALL DUPS (UNIT 2 & UP):

DET 26 DELETED

DET 28 QTY (WAS) 6 (NOW) 4

DET 43 QTY (WAS) 16 (NOW) 12

DET 65 QTY (WAS) 64 (NOW) 68

DET 69 QTY (WAS) 4 (NOW) 8

DET 75 QTY (WAS) 36 (NOW) 52

DET 121 TBOM (WAS) 91251A798

(NOW) 91251A800

DET 124 DELETED

DET 129 DELETED

DET 172J DELETED

DET 174 DELETED

DET 212 QTY (WAS) 1 (NOW) 12

DET 230 <30> WAS <5>

DET 231 <30> WAS <5>

DET 232 <30> WAS <5>

DET 233 <30> WAS <5>

DET 234 <30> WAS <5>

DET 235 <30> WAS <5>

DET’S 235H, 235J, 235N, 235P, 235R, & 235S

REVISED STK SIZE

DET 237 <30> WAS <5>

DET 238 <30> WAS <5>

DET 239 <30> WAS <5>

DET 240 <30> WAS <5>

DET 283 <30> WAS <5>

ADD DET’S 305, 306, 308, 311 THRU 329, 333, 334

REV

GENERAL NOTES:

REVISED <5> IIA (WAS) II

ADD NOTES 22, 23, 24, 25, 26, 27, 28, 29 & 30

3D MODEL:

DET 19 (WAS) ¾ DIA RM THRU

PR FT DET 43

(NOW) 9/16 DIA DR THRU

LCT AT ASSY TO -9013/-9014

DET 25 GRAPHICS ONLY

DET 72 (ADD) .10 X 15° CHAMFER

DET 77 GRAPHICS ONLY

DET 91 GRAPHICS ONLY

DET 100 GRAPHICS ONLY

DET 101 GRAPHICS ONLY

DET 172

DET 195 ADD 2X 9/16 DIA DR THRU

DET 203 (WAS) .38 X 45° CHAMFER TYP

(NOW) 5X .38 X 45° CHAMFER

(ADD) .62 X 45° CHAMFER

DET 222 (WAS) .38 X 45° CHAMFER TYP

(NOW) 5X .38 X 45° CHAMFER

(ADD) .62 X 45° CHAMFER

DET 224 (ADD) .428 & 1.500 DIM’S

DET 235 RELOCATED DET’S 235N, 235P, 235R, &

235S

TOOL FAB IN PROCESS

DET 264 (ADD) 125 SURFACE FINISH SYMBOL

DET 267 (ADD) 125 SURFACE FINISH SYMBOL

DET 269 (ADD) 125 SURFACE FINISH SYMBOL

DET 272 (ADD) 125 SURFACE FINISH SYMBOL

-1 ADD DET’S 327, 328, & 329

-9000 REM (4) OF DET 43

-9000 REM (2) OF DET 28

-9000 DET 333 (WAS) 26

-9000 ADD DET 305

-9000 ADD F/N 27 TO DET’S 71 & 72

-9001 ADD TO DET 91 “ALTER LENGTH AT ASSY”

-9002 ADD DET 306

-9003 REM DET’S 124 & 129

ADD DET 308 & STENCIL NOTES

REV

.1285 +.0100/-.0000 DIA (WAS) .1285 +.0055/-

.0000DIA

.229 +.020/-.000 DIA (WAS) .229 +.010/-.000

DIA

-9004 PDM CHANGE ONLY

-9005 PDM CHANGE ONLY

-9006 GRAPHICS ONLY

-9007 RELOCATED (2) OF DET 244

-9008 PDM CHANGE ONLY

-9009 PDM CHANGE ONLY

-9010 DET 311 (WAS) DET 174

-9010 (ADD) DET’S 312 THRU 323 & 334

-9011 DET 324 (WAS) DET 176

-9012 DET 325 (WAS) DET 179

-9013 PDM CHANGE ONLY

-9014 GRAPHICS ONLY

-9015 PDM CHANGE ONLY

-9016 PDM CHANGE ONLY

-9017 GRAPHICS ONLY

-9018 GRAPHICS ONLY

-9019 PDM CHANGE ONLY

-9020 PDM CHANGE ONLY

-9021 PDM CHANGE ONLY

-9022 PDM CHANGE ONLY

-9023 PDM CHANGE ONLY

-9024 PDM CHANGE ONLY

-9025 PDM CHANGE ONLY

-9026 PDM CHANGE ONLY

-9027 PDM CHANGE ONLY

-9028 PDM CHANGE ONLY

-9029 PDM CHANGE ONLY

-9030 PDM CHANGE ONLY

-9031 PDM CHANGE ONLY

-9032 PDM CHANGE ONLY

-9033 PDM CHANGE ONLY

-9034 PDM CHANGE ONLY

THIS REVISION REPLACES THE ORIG-TOOL DEVIATIONS

(UNIT 1 ONLY) WITH THE “AND-UP” CONFIGURATION TO

BE USED FOR ALL DUP TOOLS (UNIT 2 & UP):

DET 1BV ADDED (DUP TOOLS ONLY)

R. HOLDWICK

B. MOORE

2/07/12

J. BUCHHEIT

REV

DET 1BW ADDED (DUP TOOLS ONLY)

DET 172D DELETED (ORIG TOOL ONLY)

DET 172L ADDED (DUP TOOLS ONLY)

DET 304 ADDED NOTE 31 (ORIG TOOL ONLY)

DET 307 ADDED NOTE 31 (ORIG TOOL ONLY)

DET 309 ADDED NOTE 31 (ORIG TOOL ONLY)

DET 310 ADDED NOTE 31 (ORIG TOOL ONLY)

DET 330 ADDED NOTE 32 (ORIG TOOL ONLY)

DET 331 ADDED NOTE 32 (ORIG TOOL ONLY)

DET 332 ADDED NOTE 32 (ORIG TOOL ONLY)

DET 9000 ADDED NOTE 31

DET 9004 ADDED NOTE 32

DET 9010 ADDED NOTE 32

GENERAL NOTES:

ADDED NOTES 31 & 32

3D MODEL:

DET 1: ADD DET’S 1BV & 1BW (DUP TOOLS ONLY)

DET 172: DELETE DET 172D AND ADD DET 172L

(DUP TOOLS ONLY)

DET 9000: UPDATED (DUP TOOLS ONLY)

DET 9004: UPDATED (DUP TOOLS ONLY)

DET 9010: UPDATED (DUP TOOLS ONLY)

THIS REVISION CHANGES THE MATERIAL THICKNESS

OF THE STORAGE BINS TO HELP REDUCE FABRICATION

COSTS FOR DUPLICATE TOOLS (UNIT 2 & UP).

*** THIS CHANGE DOES NOT APPLY TO ORIG, UNIT 1. ***

DET 230 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 231 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 232 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 233 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 234 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 235 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 237 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 238 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 240 ADDED NOTE 33 (ORIG TOOL ONLY)

DET 283 ADDED NOTE 33 (ORIG TOOL ONLY)

ADDED DET’S 335-344 (DUP TOOLS ONLY)

9007 ASSY ADDED NOTE 33

M. CHRISLER

B. MOORE

3/25/12

B. MOORE

REV

GENERAL NOTES:

ADDED NOTE 33

3D MODEL:

ADDED DET’S 335-344

9007 ASSY: REM DET’S 230-235, 237, 238, 240, &

283 (REPLACED BY DETS 335-344)

THIS REVISION ADDS LASER ASSY’S FOR USE WITH

THE NOSE AND TAIL SUPPORTS, AS REQUIRED.

THIS CHANGE APPLIES TO THE ORIGINAL TOOL (UNIT 1)

AND ALL DUPLICATE TOOLS (UNIT 2 & UP):

DET 325E CORRECTED TBOM MAT’L

CALLOUT (TBOM CHANGE ONLY)

ADDED ASSY’S 9035 & 9036

ADDED DET’S 345-350

GENERAL NOTES:

ADDED NOTES 34 & 35

3D MODEL:

ADDED ASSY’S 9035 & 9036

ADDED DET’S 345-350

B. MOORE 4/17/2012 C. RADFORD

REV

REFERENCE TOOLS REQUIRED

REV REFERENCE TOOL DETAIL USED ON DETAIL/ASSEMBLY: NOTES/REMARKS

NONE

REV

BILL OF MATERIAL

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 1 1 WELDED ASSEMBLY <5>

1 1A 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 187 LG

1 1B 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 56 LG

1 1C 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 51 ½ LG

1 1D 3 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 50 LG

1 1E 4 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 42 ½ LG

1 1F 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 132 LG

1 1G 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 55 LG

1 1H 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 53 ¾ LG

1 1J 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 41 ¾ LG

1 1K 6 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 35 ¾ LG

1 1L 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 67 ¼ LG

1 1M 2 ASTM B 221, 6061-T6 SQ TBG 4 X 6 X .250 X 40 ¾ LG

1 1N 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 59 LG

1 1P 2 ASTM B 221, 6061-T6 SQ TBG 4 X 6 X .250 X 48 ½ LG

1 1R 3 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 43 LG

1 1S 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 60 LG

1 1T 4 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 18 LG

1 1U 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 229 LG

1 1V 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 103 ¼ LG

1 1W 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 126 LG

1 1X 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 19 LG

1 1Y 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 35 ¼ LG

REV

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

1 1Z 2 ASTM B 221, 6061-T6 RECT TBG 4 X 6 X .250 X 48 ¾ LG

1 1AA 1 ASTM B 221, 6061-T6 SQ TBG 3 X 3 X .250 X 50 LG

1 1AB 1 ASTM B 221, 6061-T6 SQ TBG 3 X 3 X .250 X 26 ¾ LG

1 1AC 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 7 LG

1 1AD 1 ASTM B 241, 6061-T6 SCH 40 PIPE 3 DIA X 80 LG

1 1AE 1 ASTM B 241, 6061-T6 SCH 40 PIPE 3 DIA X 79 LG

1 1AF 1 ASTM B 241, 6061-T6 SCH 40 PIPE 3 DIA X 79 LG

1 1AG 2 ASTM B 241, 6061-T6 SCH 40 PIPE 3 DIA X 56 LG

1 1AH 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 63 X 182 1/16

1 1AJ 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 63 X 18 ¾

1 1AK 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 63 X 68 1/8

1 1AL 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 21 ¾ X 48

1 1AM 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 9 X 14

1 1AN 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 X 9 ½

1 1AP 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 X 6

1 1AR 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 8 X 43 ½

1 1AS 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 8 X 26

1 1AT 2

AMS-QQ-A-200/8, 6061-T651 RECT

(2) MAKES (4)

¼ X 8 X 8

1 1AU 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 9 X 61 ½

1 1AV 1

AMS-QQ-A-250/11, 6061-T651 PLT

(1) MAKES (2)

¼ X 9 X 11 5/8

1 1AW 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 8 X 8

1 1AX 2 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 6 X 38 ¼

1 1AY 2 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 8 X 37 ½

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

1 1AZ 2 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 11 X 41

2 - 1BA - DELETED

1 1BB 4 AMS-QQ-A-250/11, 6061-T651 PLT 1/8 X 11 1/8 X 26 1/8

1 1BC 4 AMS-QQ-A-250/11, 6061-T651 PLT 1/8 X 11 1/8 X 26 1/8

1 1BD 4 AMS-QQ-A-250/11, 6061-T651 PLT 1/8 X 18 X 32 1/8

1 1BE 4 AMS-QQ-A-250/11, 6061-T651 PLT 1/8 X 11 1/8 X 18 ¼

1 1BF 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 4 X 132 ½

1 1BG 2 ASTM B 308, 6061-T6 ANG 6 X 6X ½ X 8

1 1BH 2 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 6 X 6

1 1BJ 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 2 X 6 ½

1 1BK 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 6 X 10 ½

1 1BL 4 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 10 X 22

1 1BM 2 AMS-QQ-A-200/8, 6061-T651 CHANNEL

C12 X 3 X .300 WEB

(7.41 LBS/FT)

1 1BN 2 AMS-QQ-A-200/8, 6061-T651 CHANNEL

C12 X 3 X .300 WEB

(7.41 LBS/FT)

1 1BP 2 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 12 X 62

1 1BR 2 AMS-QQ-A-200/8, 6061-T651 RECT 1 ¼ X 6 X 18

1 1BS 4 ASTM B 221, 6061-T6 SQ TBG 4 X 6 X .250 X 35 ¾ LG

1 1BT 4 ASTM B 221, 6061-T6 SQ TBG 4 X 6 X .250 X 50 LG

1 1BU 2 ASTM B 221, 6061-T6 SQ TBG 4 X 6 X .250 X 60 LG

3 1 1BV 1 AMS-QQ-A-250/11, 6061-T651 PLT 1/4 X 44 X 81 ¼ <31>

3 1 1BW 1 AMS-QQ-A-250/11, 6061-T651 PLT 1/4 X 44 X 100 <31>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 2 1 WELDED ASSEMBLY <5>

2 2A 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 69 7/8 LG

2 2B 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 19 LG

2 2C 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 39 ¾ LG

2 2D 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 46 1/8 LG

2 2E 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 65 ½ LG

2 2F 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 50 LG

2 2G 4 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 43 LG

2 2H 1 ASTM B 221, 6061-T6 RECT TBG 4 X 6 X .250 X 21 LG

2 2J 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 40 3/8 X 72

2 2K 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 6 X 38 ¼

2 2L 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 10 X 37 ½

2 2M 1 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 11 X 41

2 2N 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 26 X 27 3/8

2 2P 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 6 X 12 ½

2 2R 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 5 ¼ X 16 3/8

1 2 2S 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 3 3/4 X 4

2 2T 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 5 X 6

2 2U 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 X 12

2 2V 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 X 24

2 2W 2 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 6 X 8 ½

2 2X 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 ¾ X 5 ¾

2 2Y 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 5 ¾ X 16

2 2Z 1 ASTM B 308, 6061-T6 ANG 6 X 6X ½ X 8

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

2 2AA 1 ASTM B 308, 6061-T6 ANG 6 X 6X ½ X 8

2 2AB 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 15 ¼ X 18

9000 3 1 WELDED ASSEMBLY <5>

3 3A 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 69 7/8 LG

3 3B 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 19 LG

3 3C 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 39 ¾ LG

3 3D 2 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 46 1/8 LG

3 3E 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 65 ½ LG

3 3F 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 50 LG

3 3G 4 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .250 X 43 LG

3 3H 1 ASTM B 221, 6061-T6 RECT TBG 4 X 6 X .250 X 21 LG

3 3J 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 40 3/8 X 72

3 3K 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 6 X 38 ¼

3 3L 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 10 X 37 ½

3 3M 1 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 11 X 41

3 3N 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 26 X 27 3/8

3 3P 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 6 X 12 ½

3 3R 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 5 ¼ X 16 3/8

1 3 3S 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 3 3/4 X 4

3 3T 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 5 X 6

3 3U 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 X 12

3 3V 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 X 24

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

3 3W 2 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 6 X 8 ½

3 3X 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 ¾ X 5 ¾

3 3Y 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 5 ¾ X 16

3 3Z 1 ASTM B 308, 6061-T6 ANG 6 X 6X ½ X 8

3 3AA 1 ASTM B 308, 6061-T6 ANG 6 X 6X ½ X 8

9000 4 1 WELDED ASSEMBLY <5>

4 4A 1 AISI 1018 CD FL ½ X 6 X 7 ¾

4 4B 1 ASTM A 36 HR ANG 4 X 4 X ¾ X 5 ½

4 4C 2 AISI 1018 CD FL ¼ X 4 ½ X 5

9000 5 1 WELDED ASSEMBLY <5>

5 5A 1 AISI 1018 CD FL ½ X 6 X 7 ¾

5 5B 1 ASTM A 36 HR ANG 4 X 4 X ¾ X 5 ½

5 5C 2 AISI 1018 CD FL ¼ X 4 ½ X 5

9000 6 2 WELDED ASSEMBLY <5>

6 6A 2 AISI 1018 CD FL ½ X 6 X 7 ¾

6 6B 2 ASTM A 36 HR ANG 4 X 4 X ¾ X 4 ¼

6 6C 4 AISI 1018 CD FL ¼ X 4 ½ X 5

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 7 2 WELDED ASSEMBLY <5>

7 7A 2 AISI 1018 CD FL ½ X 5 X 7 ¾

7 7B 2 ASTM A 36 HR ANG 4 X 4 X ¾ X 4 ¼

7 7C 4 AISI 1018 CD FL ¼ X 4 X 5

9000 8 2 WELDED ASSEMBLY <5>

8 8A 2 AISI 1018 CD FL ½ X 5 X 7 ¾

8 8B 2 ASTM A 36 HR ANG 4 X 4 X ¾ X 4 ¼

8 8C 4 AISI 1018 CD FL ¼ X 4 ¼ X 5

9000 9 2 WELDED ASSEMBLY <5>

9 9A 2 AISI 1018 CD FL ½ X 5 X 7 ¾

9 9B 2 ASTM A 36 HR ANG 6 X 6 X ¾ X 4 ¼

9 9C 4 AISI 1018 CD FL ¼ X 5 X 6 ¼

9000 10 1 WELDED ASSEMBLY <5>

10 10A 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 10 X 37 ½

10 10B 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 4 X 4

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 11 1 WELDED ASSEMBLY <5>

11 11A 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 10 X 37 ½

11 11B 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 4 X 4

9000 12 1 WELDED ASSEMBLY <5>

12 12A 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 8 X 37 ½

12 12B 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 4 X 6

9000 13 1 WELDED ASSEMBLY <5>

13 13A 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 8 X 37 ½

13 13B 2 AMS-QQ-A-200/8, 6061-T651 RECT 2 X 4 X 6

9000 14 4 WELDED ASSEMBLY <5>

14 14A 4 AISI 1018 CD FL ½ X 4 ½ X 4 ¾

14 14B 4 AISI 1018 CD FL ¾ X 4 ½ X 4 ½

9000 15 2 ASTM A 36 HR ANG 6 X 6 X ¾ X 9 ½

9000 16 2 ASTM A 36 HR ANG 6 X 6 X ¾ X 9 ½

9000 17 3 AISI 1018 CD FL ½ X 6 X 8

9000 18 3 AISI 1018 CD FL ½ X 6 X 8

9000 19 4 AMS-QQ-A-200/8, 6061-T651 RECT 2 ½ X 4 X 5 ½

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 20 4 AMS-QQ-A-200/8, 6061-T651 RECT 1 ¼ X 4 X 5

9000 21 6 ASTM A 36 HR ANG 5 X 3 ½ X ¾ X 3

9000 22 2 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 6 X 87

9000 23 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 X 41

9000 24 2 AMS-QQ-A-250/11, 6061-T651 RECT ½ X 6 X 38 ¼

9000 25 2

CAGED BALL LINEAR SLIDE

THK

SHS25C2KKHHC1+2200LZ

-II

<13>

9000 26 2 ASTM A 36 HR ANG 6 X 4 X ½ X 10

9000 27 4

PULL HANDLE

McMASTER-CARR

5190A18

2 9000 28 4 AISI 1018 CD RD 1 5/8 DIA X 5 1/8 LG

29 5

¾ DIA FLAT WASHER

(5) MAKES (87)

McMASTER-CARR

90108A036

9000 30 3

¾-10 HEX NUT

(3) MAKES (54)

McMASTER-CARR

94895A036

9000 31 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 32 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 33 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 34 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 35 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 36 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 37 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 38 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 39 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

9000 40 1 AISI 1018 CD RD 2 ¾ DIA X 4 5/8 LG

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 41 10

3/8 DIA X 4 LG L-PIN

CARR LANE

CL-9-LP

42 26

1.0000 ID SELF ALIGNING BEARING

RBC BEARINGS

03-823-16

43 16

.5000 ID X ¾ OD X ¾ LG

CARR LANE

P-48-12-.5000

9000 44 4

.2500 ID BULLET NOSE BUSHING

CARR LANE

CLB-1000

9000 45 2

1.0000 ID X 1 3/8 OD X ½ LG

CARR LANE

H-88-8-1.0000

9000 46 2 ASTM A 36 HR ANG 4 X 4 X ½ X 4

9000 47 1

7/16 DIA FLAT WASHER

McMASTER-CARR

91081A032

9000 48 6 ASTM A 36 HR ANG 4 X 4 X ¼ X 4

9000 49 4 ASTM B 308, 6061-T6 ANG 3 X 3 X ½ X 5

9000 50 1 ASTM B 308, 6061-T6 ANG 6 X 6 X ½ X 19

9000 51 1 ASTM A 36 HR ANG 4 X 4 X ¼ X 4

9000 52 1 ASTM B 308, 6061-T6 ANG 3 X 3 X ½ X 23 ½

9000 53 1 ASTM B 308, 6061-T6 ANG 6 X 6 X ½ X 5

9000 54 4 ASTM A 36 HR ANG 3 ½ X 2 ½ X ½ X 3 ½

9000 55 1 AISI 1018 CD FL ¼ X 4 X 5

9000 56 2 ASTM B 308, 6061-T6 ANG 4 X 4 X ¼ X 4

9000 57 1 ASTM B 308, 6061-T6 ANG 6 X 6 X ½ X 13

9000 58 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 5

9000 59 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 5

9000 60 2 AMS-QQ-A-200/8, 6061-T651 RECT 1 ½ X 1 ¾ X 6

9000 61 1 ASTM A 36 HR ANG 4 X 4 X ¼ X 4

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9000 62 1 AISI 1018 CD FL 1/8 X ½ X 4 1/2

9000 63 2

¼-20 X 1 ½ LG SKT HD CAP SCR

(2) MAKES (74)

McMASTER-CARR

91251A546

9000 64 14

½-13 X 1 ¼ LG SKT HD CAP SCR

(14) MAKES (140)

McMASTER-CARR

91251A714

65 7

½ DIA X 1 LG DOWEL

(7) MAKES (68)

McMASTER-CARR

98381A712

9000 66 1

5/16-18 X ½ LG SKT HD CAP SCR

(1) MAKES (8)

McMASTER-CARR

91251A578

9000 67 4

7/8-9 X 8 LG SKT HD CAP SCR

McMASTER-CARR

91251A900

9000 68 1

7/8 DIA FLAT WASHER

(1) MAKES (4)

McMASTER-CARR

90108A037

9000 69 1

7/8-9 HEX NUT

(1) MAKES (4)

McMASTER-CARR

94895A842

9000 70 18

¾-10 X 1 ½ LG SKT HD CAP SCR

(18) MAKES (88)

McMASTER-CARR

91251A839

2 9000 71 48

¾-10 X 3 ½ LG SKT HD CAP SCR

McMASTER-CARR

91251A849 <27>

2 9000 72 16

¾ DIA X 2 ½ LG SKT HD SLD SCR

McMASTER-CARR

91259A845 <27>

73 3

5/8 DIA FLAT WASHER

(3) MAKES (59)

90108A035

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

74 3

5/8-11 HEX NUT

(3) MAKES (55)

McMASTER-CARR

94895A035

75 6

½-13 X 1 ½ LG SKT HD CAP SCR

(6) MAKES (52)

91251A716

76 2

½ DIA X 1 ½ LG STD DOWEL PIN

(2) MAKES (20)

McMASTER-CARR

98381A716

9001 77 1

STL AIR SKID PACKAGE

AIRFLOAT SYSTEMS

STK-20-4 MOD <15>

9001 78 1

PENDANT CONTROL ASSY

AIRFLOAT SYSTEMS

PC-1 (PEN0017-1) <15>

9001 79 49

HOSE CLAMP

PARKER HANNIFIN CORP

CL-12

9001 80 1

#10-24 X 1 LG SKT HD CAP SCR

(1) MAKES (49)

McMASTER-CARR

91251A247

9001 81 1

#10 DIA FLAT WASHER

(1) MAKES (81)

McMASTER-CARR

90108A411

9001 82 1

STRUT CHANNEL

McMASTER-CARR

3310T201 X 2 FT

ALTER

9001 83 1

STRUT CHANNEL

McMASTER-CARR

3310T201 X 2 FT

9001 84 2

STRUT MOUNT CLAMP

McMASTER-CARR

3115T14

9001 85 2

½ PIPE CAP

(McMASTER-CARR)

4638K254

9001 86 6

½ X 3 PIPE NIPPLE

McMASTER-CARR

4549K575

9001 87 5 ½ PIPE TEE 4638K123

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

McMASTER-CARR

9001 88 4

½ X 4 PIPE NIPPLE

McMASTER-CARR

4549K577

9001 89 2

½ X 5 PIPE NIPPLE

McMASTER-CARR

4549K579

9001 90 2

½ PIPE ELBOW

McMASTER-CARR

4638K133

9001 91 1

½ X 12 PIPE NIPPLE

McMASTER-CARR

4549K586

9001 92 3

BALL VALVE ½ PIPE (NPT)

PARKER HANNIFIN CORP

V500P-8

9001 93 1

QUICK DISCONNECT

DIXON

D6M4

9001 94 1

QUICK DISCONNECT

RECTUS (PARKER)

27SF AK21 SXN

9001 95 1

QUICK DISCONNECT

NITTO KOHKI CO.

400PM

96 1

3/8 DIA FLAT WASHER

(1) MAKES (10)

McMASTER-CARR

90108A417

9001 97 1

3/8-16 X 1 ¼ LG SKT HD CAP SCR

(1) MAKES (8)

91251A626

98 6 AISI 1018 CD FL 1 ½ X 1 ½ X 1 ½

99 8 AISI 1018 CD FL 1 3/8X 1 3/8 X 1 1/8

1 9002 100 1

LANDING GEAR-SINGLE LEG W/GEAR BOX

SAF/HOLLAND

LG5GA9-720B21000

1 9002 101 1

LANDING GEAR-DUAL LEG W/GEAR BOX

SAF/HOLLAND

LG5GA9-700B21000

9002 102 3 ASTM A36 HR FL ½ X 14 ¾ X 18

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9002 103 1

10 DIA X 4 WIDE SWIVEL CASTER

CASTER CONCEPTS

91-10401-65-1

9002 104 2

10 DIA X 4 WIDE RIGID CASTER

CASTER CONCEPTS

91-10401-65-2

9002 105 6

1.0000 ID BULLET NOSE BUSHING

CARR LANE

CLB-13000

9002 106 5

CLAMP ON SHAFT COUPLING

McMASTER-CARR

9799T13

9002 107 8

UNIVERSAL JOINT

BOSTON GEAR

J200A-1 (72479)

9002 108 1

SPIRAL BEVEL GEAR DRIVE

BOSTON GEAR

R146BM1 (40360)

9002 109 1

BEVEL GEAR DRIVE

BOSTON GEAR

R1215-1-B (61083)

9002 110 1

10:1 INLINE GEAR REDUCER

BOSTON GEAR

221DH-10-H21 (39002)

WITH BASE INSTALLED

9002 111 1

SLIP CLUTCH

POLYCLUTCH

SAS 44-8

<16>

9002 112 1

½ DIA PILLOW BLOCK

BOSTON GEAR

SL-1/2 (64680)

9002 113 4 AISI 1018 CD RD 1 DIA X 4 1/8 LG

9002 114 1 AISI 1018 CD RD 1 DIA X 34 7/8 LG

9002 115 1 AISI 1018 CD RD 1 DIA X 82 ½ LG

9002 116 1 AISI 1018 CD RD 1 DIA X 12 7/8 LG

9002 117 1 AISI 1018 CD RD 1 DIA X 19 5/8 LG

9002 118 1 AISI 1018 CD RD 1 DIA X 48 ¼ LG

9002 119 1 AISI 1018 CD RD ½ DIA X 10 LG

9002 120 3

¼ X ¼ X 12 LG KEY STOCK

(3) MAKES (23) @ 1” LG

98535A150

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

2 9002 121 6

5/8-11 X 1 ¾ LG SKT HD CAP SCR

(6) MAKES (30)

McMASTER-CARR

91251A800

9002 122 1

3/8-16 X 1 LG SKT HD CAP SCR

(1) MAKES (6)

McMASTER-CARR

91251A624

9002 123 12

5/8-11 X 3 ¾ LG SKT HD CAP SCR

McMASTER-CARR

91251A817

2 - 124 - DELETED <26>

9003 125 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 23 X 45 ½ <11>

9003 126 26 AMS-QQ-A-200/8, 6061-T651 RECT 2 ¼ X 2 ½ X 4 7/8

127 2

3/16 X 2 LG STD DOWEL PIN

(2) MAKES (26)

McMASTER-CARR

98381A516

9003 128 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 44 1/16 X 52 ¾ <11>

2 - 129 - DELETED <26>

9003 130 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 8 ¼ X 45 ½ <11>

9003 131 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 26 X 45 ½ <11>

9003 132 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 22 7/8 X 49 ½ <11>

9003 133 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 10 1/8 X 40 5/8 <11>

9003 134 52

1.000 ID X ½ LG FLANGED BUSHING

RBC BEARINGS

NAS77C16-50

9003 135 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 44 1/16 X 52 ¾ <11>

9003 136 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 18 X 52 ¾ <11>

9003 137 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 22 1/8 X 52 ¾ <11>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9003 138 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 15 X 52 ¾ <11>

9003 139 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 21 ¾ X 45 ½ <11>

9003 140 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 39 X 45 ½ <11>

9003 141 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 40 X 42 ½ <11>

9003 142 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 40 X 42 ½ <11>

9003 143 1 QQ A 250/11, AA 6061-T6 SHT 1/8 X 21 ½ X 24 <11>

9003 144 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 24 X 48 <11>

9003 145 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 20 5/16 X 45 ½ <11>

9003 146 9

36” SS PIANO HINGE

McMASTER-CARR

1658A734

9003 147 1

36” SS PIANO HINGE (ALTER TO 24” LG)

McMASTER-CARR

1658A734

9003 148 2 ASTM B 308, 6061-T6 ANG 1 ¼ X 1 ¼ X 1/8 X 30

9003 149 10

PUSH-TO-CLOSE DOOR LATCH

SOUTHCO

64-10-302-50

KEYED ALIKE

9003 150 2

96” STRIP BRUSH HOLDER

TANIS INC

AH700096

9003 151 2

96” NYLON STRIP BRUSH

TANIS INC

MB700696

9003 152 1

96” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700096

9003 153 1

96” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700696

9003 154 2

48” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700048

9003 155 2

48” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700648

9003 156 2

24” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700024

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9003 157 2

24” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700624

9003 158 2

72” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700072

9003 159 2

72” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700672

9003 160 1

36” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700036

9003 161 1

36” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700636

9003 162 1

12” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700012

9003 163 1

12” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700612

9003 164 1

60” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700060

9003 165 1

60” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700660

9003 166 1

60” STRIP BRUSH HOLDER (ALTER)

TANIS INC

AH700060

9003 167 1

60” NYLON STRIP BRUSH (ALTER)

TANIS INC

MB700660

9003 168 2

#6-32 X ½ LG SS FLAT HD SCREW

(UNDERCUT HD)

(2) MAKES (172)

McMASTER-CARR

91099A220

9003 169 1

1/8 DIA X 5/16 LG SOLID RIVET

(1) MAKES (174)

McMASTER-CARR

96685A185

(MS20426AD4-5)

9003 170 1

#6 DIA FLAT WASHER SS

(1) MAKES (95)

McMASTER-CARR

96659A102

9003 171 1 #6-32 SELF LOCKING HEX NUT, SS 91831A007

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

(1) MAKES (95)

McMASTER-CARR

9010 172 1 WELDED ASSEMBLY <5>

172 172A 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .500 X 91 5/8 LG

172 172B 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .500 X 47 ¾ LG

172 172C 1 ASTM B 221, 6061-T6 SQ TBG 6 X 6 X .500 X 84 ¾ LG

3 172 172D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 6 X 48 ½

<25> <32>

172 172E 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 6 X 9 ¼

172 172F 4

AMS-QQ-A-250/11, 6061-T651 PLT

(4) MAKES (8)

¼ X 2 X 6

172 172G 4 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 X 3

172 172H 2 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 5 ½ X 9 ¼

2 - 172J - DELETED

172 172K 4 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 3 X 6

3 172 172L 1 ASTM B 308, 6061-T6 ANG 6 X 6 X ¾ X 48 ½ <32>

9010 173 4

1.0000 ID X 1 3/8 OD X ¾ LG

CARR LANE

H-88-12-1.0000

- 174 - DELETED

175 1

3/16 DIA X 2 LG STD DOWEL PIN

(1) MAKES (14)

McMASTER-CARR

98381A516

2 - 176 - DELETED

177 4 AISI 1018, PRCN GRD FL STK .1250 X 2 X 2 ¾

178 28

.7500 ID SELF ALIGNING BEARING

RBC BEARINGS

03-823-12

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

2 - 179 - DELETED

180 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 X 3

181 2 AMS-QQ-A-200/8, 6061-T651 RD 1 ½ DIA X 3 LG

182 1

1/16 THICK 50A DURO NEOORENE RUBBER

(1) MAKES (2) ½ X 3

2618T221

183 4 ASTM B 308, 6061-T6 ANG 1 X 1X 1/8 X 3

184 2

INDUSTRIAL LASER

LASER TOOLS CO INC

L56

185 1

¼-20 X 1 LG SKT HD CAP SCR

(1) MAKES (8)

91251A542

186 1

#6-32 X ½ LG SKT HD CAP SCR

(1) MAKES (8)

McMASTER-CARR

91251A148

2 - 187 - DELETE

9013 188 1 WELDED ASSEMBLY <5>

188 188A 1 AMS-QQ-A-250/11, 6061-T651 PLT 1 X 11 3/8 X 62

188 188B 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 45 ¾

188 188C 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 39 ¾

9013 189 1 ASTM B 308, 6061-T6 ANG 6 X 6X ¾ X 11 ½

9013 190 1 ASTM B 308, 6061-T6 ANG 6 X 6X ¾ X 11 ½

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

191 2

1.500 ID X 1 ¾ OD X 1 LG (ALTER)

CARR LANE

P-112-16-1.5000

(SPECIAL)

192 2

1.3125 ID X 1 ½ OD X 1 LG (ALTER)

CARR LANE

P-96-16-1.3125

(SPECIAL)

9014 193 1 WELDED ASSEMBLY <5>

193 193A 1 AMS-QQ-A-250/11, 6061-T651 PLT 1 X 11 3/8 X 62

193 193B 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 45 ¾

193 193C 1 ASTM B 308, 6061-T6 ANG 4 X 4 X ½ X 39 ¾

9014 194 2 ASTM B 308, 6061-T6 ANG 6 X 6X ¾ X 7

195 2 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 7 X 44 ¾

9005 196 8

½ DIA ADJUSTABLE BALL LOCK PINS

CARR LANE

CL-8-ABPK-1.50

9005 197 2 AISI 4142 CF HT RD 1 ¾ DIA X 5 LG

9005 198 2 AISI 4142 CF HT RD 1 ¾ DIA X 1 LG

9005 199 2 AISI 4142 CF HT RD 2 DIA X 5 LG

9005 200 2 AISI 4142 CF HT RD 2 DIA X 1 LG

9017 201 1 WELDED ASSEMBLY <5>

201 201A 1 ASTM B 221, 6061-T6 SQ TBG 4 X 4 X .250 X 61 LG

201 201B 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 7 5/8 X 10 5/8

201 201C 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 8 ¾ X 10 5/8

201 201D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ¼ X 14 3/8

201 201E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ¼ X 9 7/8

201 201F 2 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 X 4

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

201 201G 2

AMS-QQ-A-250/11, 6061-T651 PLT

(2) MAKES (3)

½ X 3 5/16 X 4

201 201H 3 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 X 2

201 201J 1 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 3 X 4 3/8

201 201K 1 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 3 ¼ X 3 5/8

9017 202 1 WELDED ASSEMBLY <5>

202 202A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 7 5/8

202 202B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 ½ X 3 X 6 ¼

9017 203 1 WELDED ASSEMBLY <5>

203 203A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 7 5/8

203 203B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 3/8 X 3 X 6 ¼

9017 204 1 WELDED ASSEMBLY <5>

204 204A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 8 ¾

204 204B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 ½ X 3 X 6

9017 205 1 WELDED ASSEMBLY <5>

205 205A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 8 ¾

205 205B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 3/8 X 3 X 6

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

9017 206 1 WELDED ASSEMBLY <5>

206 206A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 X 5 ¼

206 206B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 4

9017 207 1 WELDED ASSEMBLY <5>

207 207A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

207 207B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 5

9017 208 1 WELDED ASSEMBLY <5>

208 208A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

208 208B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

9017 209 1 WELDED ASSEMBLY <5>

209 209A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

209 209B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

9017 210 1 WELDED ASSEMBLY <5>

210 210A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ¾ X 4 ¾

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

210 210B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

9002 211 1

3/8-16 X 3 LG SKT HD CAP SCR

(1) MAKES (4)

McMASTER-CARR

91251A636

212 2

½-13 X 2 ½ LG SKT HD CAP SCR

(2) MAKES (12)

McMASTER-CARR

91251A722

9017 213 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 ¼ X 7 ¾

214 4

1.1250 ID X 1 ½ OD X 1 3/8 LG

P-96-22-1.1250 (SPECIAL)

215 4

1.1250 ID X 1 ½ OD X 5/8 LG

CARR LANE

P-96-10-1.1250 (SPECIAL)

216 8

1.0000 ID X 1 3/8 OD X 1 LG

CARR LANE

P-88-16-1.0000 (SPECIAL)

9002 217 1 AISI 1018 CD RD 1 DIA X 1 ½ LG

218 2

1/2-13 THREADED INSERT

CL-1213-KS

219 2

SWIVEL HOIST RING

CROSBY (JOHN SAKACH)

1068010

9018 220 1 WELDED ASSEMBLY <5>

220 220A 1 ASTM B 221, 6061-T6 SQ TBG 4 X 4 X .250 X 61 LG

220 220B 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 7 5/8 X 10 5/8

220 220C 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 8 ¾ X 10 5/8

220 220D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ¼ X 14 3/8

220 220E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ¼ X 9 7/8

220 220F 2 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 X 4

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

220 220G 2

AMS-QQ-A-250/11, 6061-T651 PLT

(2) MAKES (3)

½ X 3 5/16 X 4

220 220H 3 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 X 2

220 220J 1 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 3 X 4 3/8

9018 221 1 WELDED ASSEMBLY <5>

221 221A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 7 5/8

221 221B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 ½ X 3 X 6 ¼

9018 222 1 WELDED ASSEMBLY <5>

222 222A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 7 5/8

222 222B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 3/8 X 3 X 6 ¼

9018 223 1 WELDED ASSEMBLY <5>

223 223A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 8 ¾

223 223B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 ½ X 3 X 6

9018 224 1 WELDED ASSEMBLY <5>

224 224A 1 AMS-QQ-A-250/11, 6061-T651 PLT 5/8 X 5 ¼ X 8 ¾

224 224B 1 AMS-QQ-A-250/11, 6061-T651 PLT 2 3/8 X 3 X 6

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

9018 225 1 WELDED ASSEMBLY <5>

225 225A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 X 5 ¼

225 225B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 4

9018 226 1 WELDED ASSEMBLY <5>

226 226A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

226 226B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 5

9018 227 1 WELDED ASSEMBLY <5>

227 227A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

227 227B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

9018 228 1 WELDED ASSEMBLY <5>

228 228A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ½ X 4 ¾

228 228B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

9018 229 1 WELDED ASSEMBLY <5>

229 229A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 ¾ X 4 ¾

229 229B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 ½ X 3 ½

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

4 9007 230 1 WELDED ASSEMBLY <33>

230 230A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 15 X 34

230 230B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 15 X 27

230 230C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 X 34

230 230D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 X 27

230 230E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 X 15

230 230F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 X 27

4 9007 231 1 WELDED ASSEMBLY <33>

231 231A 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 ½ X 13 ½

231 231B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 14

231 231C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 11 9/16

231 231D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 11 7/8

231 231E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 8

231 231F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 ¼ X 13 3/16

231 231G 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 11 7/8

231 231H 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 8 ¾

231 231J 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 7/8 X 7 ½

231 231K 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ½ X 6 9/16

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

4 9007 232 1 WELDED ASSEMBLY <33>

232 232A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 23 ¼ X 33 ½

232 232B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 19 ¼ X 23 ¼

232 232C 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 5/8 X 33 ½

232 232D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 18 ¼ X 23 ¼

232 232E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 9/16 X 22 ¾

232 232F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 12 X 23 ¼

232 232G 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 9 5/8 X 33 ½

232 232H 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ¾ X 18 ¼

232 232J 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 9/16 X 7 ¾

232 232K 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 7 ¾ X 12

4 9007 233 1 WELDED ASSEMBLY <33>

233 233A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 15 1/8 X 38 ¼

233 233B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 35 ¼

233 233C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 1/8 X 35 ¼

233 233D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 7/8 X 35 ¼

233 233E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 6 ¾ X 35

233 233F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 6 ¾ X 35 ¼

233 233G 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 1/8 X 35

233 233H 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ¼ X 15 1/8

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

4 9007 234 1 WELDED ASSEMBLY <33>

234 234A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 9 ½ X 72 1/8

234 234B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 X 62 ¼

234 234C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 X 40 ¾

234 234D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 X 5 3/16

234 234E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 ½ X 4

234 234F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 7/8 X 4

234 234G 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 1/8 X 4

4 9007 235 1 WELDED ASSEMBLY <33>

235 235A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 15 X 61 ½

235 235B 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 15 X 49 ½

235 235C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 49 ½

235 235D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 17 ¼

235 235E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 17 ¼

235 235F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 17 ¼

235 235G 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 17 ¼

235 235H 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 18 ½

235 235J 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ½ X 18 ½

235 235K 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 13 X 27

235 235L 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 X 15

235 235M 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 3 X 15

235 235N 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 7/16 X 8 ½

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

235 235P 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 7/16 X 8 ½

235 235R 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 7/16 X 8 ½

235 235S 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 4 7/16 X 8 ½

9007 236 52

.7500 ID X ½ LG FLANGED BUSHING

RBC BEARINGS

NAS77C12-50

4 9007 237 1 WELDED ASSEMBLY <33>

237 237A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 11 7/8

237 237B 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 12 5/8

237 237C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 5/8 X 10

237 237D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 ½ X 9 ½

237 237E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 7/8 X 10

237 237F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 11 7/8

237 237G 3 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 12 5/8

4 9007 238 1 WELDED ASSEMBLY <33>

238 238A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 11 ¾

238 238B 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 ¾ X 11 ½

238 238C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 8 5/8 X 10

238 238D 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 5/8 X 9 ½

238 238E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 7/8 X 10

238 238F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 11 7/8

238 238G 3 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 13 ¼

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

2 9007 239 2 WELDED ASSEMBLY <30>

239 239A 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 12 ¼ X 62 <11>

239 239B 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 11 7/8 X 62 <11>

239 239C 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ¾ X 62 <11>

239 239D 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 7/8 X 62 <11>

239 239E 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 1 3/16 X 62 <11>

4 9007 240 2 WELDED ASSEMBLY <33>

240 240A 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 16

240 240B 4 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 ¾ X 16

240 240C 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 ¾ X 12 ¾

240 240D 6 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 2 ¾ X 16

9007 241 8 ASTM B 308, 6061-T6 ANG 4 X 4 X ¼ X 4 ¼

9007 242 3 ASTM B 308, 6061-T6 ANG 4 X 4 X ¼ X 4 ¼

9007 243 2

PULL HANDLE

GRAINGER

4PE17

9007 244 4 AMS-QQ-A-200/8, 6061-T651 RECT 1 X 2 X 5 7/8

9007 245 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 5 ½ X 6

9007 246 4

DUAL SHAFT RAIL SYSTEM

THOMSON

2DA-12-00B L60

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9007 247 4

DUAL SHAFT RAIL SYSTEM CARRIAGE

THOMSON

DSRC-12-SB

9007 248 16 AMS-QQ-A-200/8, 6061-T651 RD 1/1/2 DIA X ¼ LG

9007 249 2 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 3 ½ X 60

9007 250 1

¼ DIA FLAT WASHER

(1) MAKES (32)

McMASTER-CARR

90108A413

9007 251 1

¼ -20 X 1 LG SKT HD CAP SCR

(1) MAKES (48)

McMASTER-CARR

91251A542

9007 252 2

5/16-18 X 7/8 LG SKT HD CAP SCR

(1) MAKES (80)

McMASTER-CARR

91251A582

9008 253 3 WELDED ASSEMBLY <5>

253 253A 3 ASTM A 36 HR PLT 3/8 X 7 5/8 X 7 5/8

253 253B 3 ASTM A 36 HR RD 3 DIA X 1 ½ LG

9008 254 3

AISI 1018 CD RD

(3) MAKES (6)

3 DIA X ¼ LG

9008 255 1

¼ -20 X 1 LG FLT HD SKT HD CAP SCR

(1) MAKES (12)

McMASTER-CARR

91253A542

9008 256 3 AISI 4142 CF ANN RD 1 5/8 DIA X 3 7/8 LG

9008 257 1

1-8 HEX NUT

(1) MAKES (3)

McMASTER-CARR

94895A038

9009 258 1 WELDED ASSEMBLY <5>

258 258A 1 ASTM B 221, 6061-T6 SQ TBG 2 X 2 X .250 X 65 3/8 LG

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

258 258B 1 ASTM B 308, 6061-T6 ANG 4 X 4 X 3/8 X 2 ½

258 258C 1 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 8 X 10

258 258D 2 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 5/8 X 2

9009 259 1 WELDED ASSEMBLY <5>

259 259A 1 ASTM B 221, 6061-T6 SQ TBG 2 X 2 X .250 X 6 ¾ LG

259 259B 1 ASTM B 308, 6061-T6 ANG 4 X 4 X 3/8 X 2 ½

259 259C 2 AMS-QQ-A-200/8, 6061-T651 RECT 5/8 X 2 ½ X 6

259 259D 1 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 7/8 X 2

9009 260 1

¾ DIA X 2 ¼ LG SKT HD SLD SCR

McMASTER-CARR

91259A844

9002 261 12 AMS-QQ-A-200/8, 6061-T651 RECT 1 X 2 X 2 ½

9000 262 2 AMS-QQ-A-200/8, 6061-T651 RECT 1 X 1 ½ X 7 ½

9019 263 6

ADJUSTABLE DIA PIN

(1.000 NOM DIA X 6 3/8 GRIP)

AVIBANK MFG INC

ADP-16-102K <12><17>

9019 264 6 AISI 304 SS SEEMLESS TUBING 1 1/8 OD X .065 W X 7 LG <12>

265 42 3/32 DIA X 3/8 LG SOLID RIVET MS20426AD3-6

9020 266 6

ADJUSTABLE DIA PIN

(.875 NOM DIA X 6 ¼ GRIP)

AVIBANK MFG INC

ADP-14-100K <12><17>

9020 267 6 AISI 304 SS SEEMLESS TUBING 1 OD X .065 W X 7 LG <12>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

9021 268 28

ADJUSTABLE DIA PIN

(.625 NOM DIA X 2 1/8 GRIP)

AVIBANK MFG INC

ADP-10-34K <12><17>

9021 269 28 AISI 304 SS SEEMLESS TUBING ¾ OD X .065 W X 3 LG <12>

9021 270 1

3/32 DIA X 5/16 LG SOLID RIVET

(1) MAKES (28)

McMASTER-CARR

96685A149

(MS20426AD3-5)

9022 271 30

ADJUSTABLE DIA PIN

(.875 NOM DIA X 2 1/8 GRIP)

AVIBANK MFG INC

ADP-14-34K <12><17>

9022 272 30 AISI 304 SS SEEMLESS TUBING 1 OD X .065 W X 3 LG <12>

9002 273 1

3/16 DIA X 1 LG STD DOWEL PIN

McMASTER-CARR

98381A510

9000 274 6

¾-10 THREADED INSERT

CARR LANE

CL-3410-KS

9009 275 2

¾ DIA X 2 LG BALL LOCK PIN

CARR LANE

CL-12-BLPT-2.00-S

9000 276 1

5/16 DIA X 2 LG STD DOWEL PIN

(1) MAKES (16)

McMASTER-CARR

98381A591

9000 277 4

5000 LBS HOIST RING-CROSBY

JOHN SAKASH CO

1068030

9000 278 1 AMS-QQ-A-250/11, AA 6061-T6 SHT

.063 X 2 ½ X 6

NAMEPLATE

9003 279 2 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 1 X 42

9007 280 1 AISI 304 ANN 2B FIN SHT 11 GA X 9 ¾ X 18 ½

9007 281 1 AISI 304 ANN 2B FIN SHT 11 GA X 25 ½ X 26 ½

9007 282 1 AISI 304 ANN 2B FIN SHT 11 GA X 8 ½ X 14

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

4 9007 283 1 WELDED ASSEMBLY <33>

283 283A 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 17 ½

283 283B 2 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 17 ½

283 283C 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 9 ½

283 283D 3 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 5 ½ X 17 ¼

283 283E 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 17 ½

283 283F 1 AMS-QQ-A-250/11, 6061-T651 PLT ½ X 10 X 13 1/8

9000 284 4

½ DIA SHOULDER CONSTUCTION BALL

CARR LANE

CL-2-SCB

9007 285 1 AMS-QQ-A-200/8, 6061-T651 RECT ½ X 3 X 20

286 8 WELDED ASSEMBLY <5>

1 286 286A 8 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 6 ½ X 6 ½

1 286 286B 8 ASTM B 241, 6061-T6, RND TBG 2.0 X .125 WALL X 8 ¼

1 286 286C 16 AMS-QQ-A-200/8, 6061-T651 RECT 5/8 X 2 ½ X 5 ¾

1 286 286D 8 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X ¾ X 1 ¾

287 16

ADVANCED MACHINE & ENGINEERING CO.

RLN-138600SN-02-23.25

ROD-LOCK ASSY:

AMLOK, SPECIAL, PNEUMATIC

RELEASE 1 3/8" ROD, 6" BORE,

4,800 LBS HOLDING,

65 PSI RELEASE, RELEASE PORT

LOCATED ON FRONT/BUSHING

FACE; STAND ALONE RETAINER

USED WITH BUSHING ONLY; NO

TIE-RODS.

1-3/8 OD X 1/2 ID X 23.25 LG

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

HYDRAULIC ROD (1-1/8-12 X 1-1/4

EXT-THREAD AND RING GROOVE

ENDS)

EXT. RETAINING RING

(1-3/8" SHAFT DIA.)

288 21

½-13 X 4 LG SKT HD CAP SCR

(21) MAKES (104)

91251A728

289 26

¼-18 FNPT X ¼-18 MNPT AIR TOOL SWIVEL

LEGACY

A9700

290 10 WELDED ASSEMBLY <5>

290 290A 10 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 6 ½ X 6 ½

290 290B 10 ASTM B 241, 6061-T6, RND TBG 2.0 X .125 WALL X 18 ¼

290 290C 20 AMS-QQ-A-200/8, 6061-T651 RECT 5/8 X 2 ½ X 5 ¾

290 290D 40 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 1 X 2 7/8

290 290E 20 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X ¾ X 1 ¾

9032 291 8 WELDED ASSEMBLY <5>

291 291A 8 AMS-QQ-A-250/11, 6061-T651 PLT ¾ X 6 ½ X 6 ½

291 291B 8 ASTM B 241, 6061-T6, RND TBG 2.0 X .125 WALL X 24 ¼

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

291 291C 16 AMS-QQ-A-200/8, 6061-T651 RECT 5/8 X 2 ½ X 5 ¾

291 291D 32 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X 1 X 2 7/8

291 291E 8 AMS-QQ-A-200/8, 6061-T651 RECT ¼ X ¾ X 1 ¾

9032 292 8 ADVANCED MACHINE & ENGINEERING CO.

RLN-138600SN-02-34.25

ROD-LOCK ASSY:

AMLOK, SPECIAL, PNEUMATIC

RELEASE 1 3/8" ROD, 6" BORE,

4,800 LBS HOLDING,

65 PSI RELEASE, RELEASE PORT

LOCATED ON FRONT/BUSHING

FACE; STAND ALONE RETAINER

USED WITH BUSHING ONLY; NO

TIE-RODS.

1-3/8 OD X 1/2 ID X 34.25 LG

HYDRAULIC ROD (1-1/8-12 X 1-1/4

EXT-THREAD AND RING GROOVE

ENDS)

9033 293 2 ADVANCED MACHINE & ENGINEERING CO.

RLN-138600SN-02-52.25

ROD-LOCK ASSY:

AMLOK, SPECIAL, PNEUMATIC

RELEASE 1 3/8" ROD, 6" BORE,

4,800 LBS HOLDING,

65 PSI RELEASE, RELEASE PORT

LOCATED ON FRONT/BUSHING

FACE; STAND ALONE RETAINER

USED WITH BUSHING ONLY; NO

TIE-RODS.

1-3/8 OD X 1/2 ID X 52.25 LG

HYDRAULIC ROD (1-1/8-12 X 1-1/4

EXT-THREAD AND RING GROOVE

ENDS)

294 26

QUICK DISCONNECT

DIXON

D2M2

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

295 26

QUICK DISCONNECT

RECTUS (PARKER)

27SF AK13 SXN

296 26

QUICK DISCONNECT

NITTO KOHKI CO.

20PM

297 26

BREATHER VENT

McMASTER-CARR

9833K18

9000 298 4 AMS-QQ-A-200/8, 6061-T651 RECT ¾ X 2 X 2

299 26

¼-19 BSPT TO ¼-18 NPT ADAPTER

PARKER HANNIFIN

4K-4 RA-SS

300 6

.2500 ID X 13/32 OD X 1/2LG PR FT BUSHING

CARR LANE

P-26-12-.2500

1 9002 301 6 AISI 1018 CD FL ¼ X 1 ½ X 10 ½

302 8

.5000 ID X ¾ OD X ½ LG HEADED BUSHING

CARR LANE

CL-B-4000

303 2

APERATURE PACK

LASER TOOLS CO INC

AP15

3 9000 304 1 QQ A 250/11, AA 6061-T6 SHT 1/4 X 45 ½ X 83 5/8

<11> <25> <31>

2 9000 305 2 AISI 1018 CD RD 1 5/8 DIA X 6 5/8 LG

2 9002 306 2

1 INCH SHAFT COLLAR

McMASTER-CARR

6436K18

3 9000 307 1 QQ A 250/11, AA 6061-T6 SHT 1/4 X 45 ½ X 102 7/16

<11> <25>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

<31>

2 9003 308 2 QQ A 250/11, AA 6061-T6 SHT 1/8 X 44 3/8 X 45 ¾ <11>

3 9000 309 4

¼-20 X 5/8 LG SKT HD FLT HD SCR

(4) MAKES (140)

McMASTER-CARR

91253A539 <25> <31>

3 9000 310 2

¼ DIA X ½ LG STL DOWEL

(2) MAKES (136)

McMASTER-CARR

98381A537 <25> <31>

2 9010 311 1

M8-1.25 X 40 SKT HD CAP SCR

(1) MAKES (16)

McMASTER-CARR

91290A442

2 9010 312 1 AISI 1018 CD FL ½ X 6 X 77

2 9010 313 1 AISI 1018 CD FL ½ X 6 X 83 1/8

2 9010 314 1 AISI 1018 CD FL ½ X 6 X 7 3/8

2 9010 315 1 AISI 1018 CD FL ½ X 6 X 13 ½

2 9010 316 2 AISI 1018 CD FL ½ X 6 X 52 ¼

2 9010 317 2 AISI 1018 CD FL ½ X 4 1/8 X 6

2 9010 318 1 AISI 1018 CD FL ½ X 9 ¼ X 77

2 9010 319 1 AISI 1018 CD FL ½ X 9 ¼ X 83 1/8

2 9010 320 3

3/8 DIA X 1 LG DOWEL

(3) MAKES (58)

McMASTER-CARR

98381A624

2 9010 321 3

3/8-16 X 1 LG SKT HD CAP SCR

(3) MAKES (58)

McMASTER-CARR

91251A624

2 9010 322 3

3/8 DIA X 1 ½ LG DOWEL

(3) MAKES (62)

McMASTER-CARR

98381A628

2 9010 323 3 3/8-16 X 1 ½ LG SKT HD CAP SCR 91251A628

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

(3) MAKES (62)

McMASTER-CARR

2 9011 324 1 WELDED ASSEMBLY <5>

2 324 324A 1 AISI 1018 CD FL ½ X 3 X 32 LG

2 324 324B 2 AISI 1018 CD FL 2 X 3 X 6 1/8

2 324 324C 2 AISI 1018 CD FL ½ X 3 X 3 ½

2 324 324D 2 AISI 1018 CD FL ½ X 3 X 5

2 324 324E 1 AISI 1018 CD FL ¼ X 5 X 31 7/8

2 324 324F 1 AISI 1018 CD FL ½ X 3 X 12

2 324 324G 2 AISI 1018 CD FL ½ X 3 X 6 5/8

2 324 324H 2 AISI 1018 CD FL ½ X 3 X 4

2 9012 325 1 WELDED ASSEMBLY <5>

2 325 325A 1 AISI 1018 CD FL ½ X 3 X 32 LG

2 325 325B 2 AISI 1018 CD FL 2 X 3 X 6 1/8

2 325 325C 2 AISI 1018 CD FL ½ X 3 ½ X 6

2 325 325D 2 AISI 1018 CD FL ½ X 4 ½ X 6

5 325 325E 1 AISI 1018 CD FL ¼ X 5 X 31 ¾

2 325 325F 1 ASTM A500 GRADE B STRL SQ TBG 2 X 2 X .250 X 3 3/8 LG

2 325 325G 1 AISI 1018 CD FL ¼ X 3 X 7 ¼

2 325 325H 1 AISI 1018 CD FL ½ X 3 X 12

2 325 325J 2 AISI 1018 CD FL ½ X 3 X 6 5/8

2 325 325K 2 AISI 1018 CD FL ½ X 3 X 4

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

2 9004 326 1

½-20 X 5 LG SKT HD CAP SCR

(1) MAKES (4)

McMASTER-CARR

91251A031

2 -1 327 1

6” X 60’ ANTISLIP TAPE

McMASTER-CARR

6970T53

2 -1 328 1

.040 X 60” X 5’ LG

NYLON FABRIC

McMASTER-CARR

8811K56 X 5’ LG

2 -1 329 1

1” X 15’ LG

SELF ADHESIVE HOOK AND LOOP TAPE

McMASTER-CARR

94985K813

3 9010 330 3

3/8 DIA X 1 LG DOWEL

(3) MAKES (58)

McMASTER-CARR

98381A624 <25> <32>

3 9010 331 3

3/8-16 X 1 LG SKT HD CAP SCR

(3) MAKES (58)

McMASTER-CARR

91251A624 <25> <32>

3 9010 332 1 ASTM B 308, 6061-T6 ANG 6 X 6 X ½ X 48 ½

<25> <32>

2 9000 333 2 ASTM A 36 HR ANG 6 X 4 X ½ X 10

2 9010 334 2 WELDED ASSEMBLY <5>

2 334 334A 2 ASTM A 36 HR ANG 6 X 6 X ½ X 6

2 334 334B 2 AISI 1018 CD FL ¾ X 5 ¾ X 7 7/8

4 9007 335 1 WELDED ASSEMBLY <30> <33>

335 335A 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 15 ¼ X 34 1/8 <11>

335 335B 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 15 ¼ X 27 1/8 <11>

335 335C 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 ¼ X 34 1/8 <11>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

335 335D 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 ¼ X 27 1/8 <11>

335 335E 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 ¼ X 15 ¼ <11>

335 335F 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 ¼ X 27 1/8 <11>

4 9007 336 1 WELDED ASSEMBLY <30> <33>

336 336A 2 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 11 ¾ X 14 <11>

336 336B 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 14 1/8 <11>

336 336C 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾X 11 ¾ <11>

336 336D 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 11 15/16 <11>

336 336E 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 8 ¼ <11>

336 336F 2 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 11 ½ X 13 11/16 <11>

336 336G 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 12 <11>

336 336H 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 6 7/8 <11>

336 336J 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 ¾ X 6 13/16 <11>

4 9007 337 1 WELDED ASSEMBLY <30> <33>

337 337A 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 23 ½ X 33 5/8 <11>

337 337B 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 19 3/8 X 23 ¾ <11>

337 337C 4 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 7 7/8 X 33 5/8 <11>

337 337D 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 18 3/8 X 23 ½ <11>

337 337E 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 11/16 X 22 ¼ <11>

337 337F 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 12 X 23 ½ <11>

337 337G 2 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 9 7/8 X 33 5/8 <11>

337 337H 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 X 18 3/8 <11>

REV

ASSY

USED ON DET NO

QTY

REQD MATERIAL (OR EQUIVALENT) STOCK SIZE

NOTES OR

REMARKS

337 337J 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 11/16 X 8 <11>

337 337K 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 X 12 <11>

4 9007 338 1 WELDED ASSEMBLY <30> <33>

338 338A 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 15 3/8 X 38 3/8 <11>

338 338B 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 ¾ X 35 3/8 <11>

338 338C 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 5/16 X 35 3/8 <11>

338 338D 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 7/8 X 35 3/8 <11>

338 338E 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 6 7/8 X 35 ¼ <11>

338 338F 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 6 7/8 X 35 3/8 <11>

338 338C 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 3/8 X 35 ¼ <11>

338 338H 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 8 5/8 X 15 3/8 <11>

4 9007 339 1 WELDED ASSEMBLY <30> <33>

339 339A 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 10 X 72 3/8 <11>

339 339B 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 ¼ X 62 5/16 <11>

339 339C 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 ¼ X 40 ¾ <11>

339 339D 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 4 ¼ X 5 ½ <11>

339 339E 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 2 ¼ X 4 ¼ <11>

339 339F 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 X 4 ¼ <11>

339 339G 1 AMS-QQ-A-250/11, 6061-T651 PLT ¼ X 3 7/16…