FA821720R5010DRAFT.pdf

DRAFT

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 33 (REV. 9-97)

PREVIOUS EDITION NOT USABLE Prescribed by GSA – FAR (48 CFR) 53/214(c)

SOLICITATION, OFFER AND AWARD JSU

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15CFR 7900)

RATING

DO: A7

Page of Page

2. CONTRACT NO. 3. SOLICITATION NO.

FA8217-20-R-5010

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

7. ISSUED BY

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFLCMC PZZK

6039 WARDLEIGH RD BLDG 1206

HILL AIR FORCE BASE UT 84056-5838

BUYER: Tyler Newey/AFLCMC tyler.newey@us.af.mil Phone: (801) 777- 6086

FA8217 8. ADDRESS OFFER TO (If other than Item 7)

11. TABLE OF CONTENTS

(X) SEC. DESCRIPTON PAGE(S) (X) Sec. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

X A SOLICITATION/CONTRACT FORM

X B SUPPLIES OR SERVICES AND

C DESCRIPTION/SPECS/WORK STATEMENT

D PACKAGING AND MARKING

X E INPECTION AND ACCEPTANCE

F DELIVERIES OR PERFORMANCE

X G CONTRACT ADMINISTRATION DATA

H SPECIAL CONTRACT REQUIREMENTS

X I CONTRACT CLAUSES

PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER

X J LIST OF ATTACHMENTS

X K REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

PART IV - REPRESENTATIONS AND INSTRUCTIONS

X L INSTRS., CONDS., AND NOTICES TO OFFERORS

X M EVALUATION AND FACTORS FOR AWARD

OFFER (Must be fully completed by offeror)

24. ADMINISTERED BY (If other than Item 7) SCD:C 25. PAYMENT WILL BE MADE BY CODE

(SEE ESP CLAUSE 252.232-7003.)

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

28. AWARD DATE

X

5. DATE ISSUED 6.REQUISITION/PURCHASE NO

NOTE: In sealed bid solicitations “offer” and “offeror” mean “bid” and “bidder”.

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if hand carried, in the depository located in until (Hour) local time -- (Date).

CAUTION- LATE Submissions, Modifications, and Withdrawals: Section L, Provision No 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this section.

10. FOR INFORMATION

CALL:

A. NAME

Tyler Newey

B. TELEPHONE (NO COLLECT CALLS)

(801 ) 777 -6086

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period. This solicitation is for the Aerospace Dominance Systems Support (ADSS) basic IDIQ contract.12. In compliance with the above, the undersigned agrees, if this offer is accepted within 120 calendar days (60 calendar days unless a different period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT(See Section I, Clause No 52.232-8)

10 CALENDAR DAYS 20 CALENDAR DAYS 30 CALENDAR DAYS CALENDAR DAYS

14. ACKNOWLEDGEMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated:

AMENDMENT NO. DATE AMENDMENT NO. DATE

15A. NAME AND

ADDRESS OF

OFFEROR

CODE FACILITY 16. NAME AND TITLE OF PERSON

AUTHORIZED TO SIGN OFFER (Type or print)

15B. TELEPHONE NO.

(Include Area Code)

15C.CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE-ENTER

SUCH ADDRESS IN SCHEDULE.

17. SIGNATURE 18. OFFER DATE

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS 20. AMOUNT

21. ACCOUNTING AND APPROPRIATION

SEE SCHEDULE

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN

COMPETITION

10 U.S.C. 2304 (c) ( 5 ) 41 U.S.C. 253 (c) X

23. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM

SOLICITATION

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

C. E-MAIL ADDRESS

tyler.newey@us.af.mil

FA8217-20-R-5010

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

O&M Funded Engineering Services

Item No.

Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered operations and Maintenance type work, cannot be pure research, development, test and evaluation or procurement activities.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

PERIOD OF PERFORMANCE TO BE CITED ON EACH TASK ORDER.

RDT&E Funded Engineering Services

Item No.

Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered pure research, development, test and evaluation type work, cannot be operations and maintenance or procurement activities.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

FA8217-20-R-5010

Procurement Funded Engineering Services

Item No.

Cost Plus Fixed Fee Quantity U/I Estimated Cost Fixed Fee Est Total Cost

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered procurement type work, cannot be pure research, development, test and evaluation or operations and maintenance activities.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

O&M Funded Engineering Services

Firm Fixed Price Quantity U/I Unit Price Amount

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered operations and Maintenance type work, cannot be pure research, development, test and evaluation or procurement activities.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

RDT&E Funded Engineering Services

Firm Fixed Price Quantity U/I Unit Price Amount

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered pure research, development, test and evaluation type work, cannot be operations and maintenance or procurement activities.

FA8217-20-R-5010

RDT&E Funded Engineering Services

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Procurement Funded Engineering Services

Firm Fixed Price Quantity U/I Unit Price Amount

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered procurement type work, cannot be pure research, development, test and evaluation or operations and maintenance activities.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Data and Reports

Not Separately Priced Quantity U/I Unit Price

LO NSP

DATA

DATA IAW DD 1423-1's, attached hereto and in the SOW The contractor shall furnish Data and Reports as required by the Contract Data Requirements List (CDRL), DD Form 1423, hereby incorporated as Exhibits that are identified in the Task Orders. Exhibit "T0" referenced under this CLIN, refers to the fact that the correct exhibit will be referenced at the Task Order level. Applicable CDRLs will be specified on each task order issued hereunder. This CLIN is Not Separately Priced (NSP).

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Exhibit: T0

FA8217-20-R-5010

Contractor Acquired Property - Hardware

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

LO

R425 Contractor Acquired Property - Hardware The contractor shall furnish all hardware and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Contractor Acquired Property - Software

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

LO

R425 Contractor Acquired Property - Software The contractor shall furnish all software and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ.

Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Travel

Cost Reimbursement - No Fee Quantity U/I Est Unit Cost Total Estimated Cost

LO

R425 The contractor shall furnish all required travel in support of contract performance. This includes travel in support of CLINS 0001-0006, 0008, 0009, and subsequent CLINS as appropriate.

FA8217-20-R-5010

Travel

Travel shall be estimated at the order level. Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required

Bid and Proposal Costs

Firm Fixed Price Quantity U/I Unit Price Amount

LO

R425 The contractor shall furnish all labor, supplies, hardware, software, travel, facilities, and other direct costs reasonably required to accomplish Task Orders issued pursuant to the requirements contained in the Statement of Work IAW any supplemental PWS, and ordering procedures of this IDIQ. All work must be considered operations and Maintenance type work, cannot be pure research, development, test and evaluation or procurement activities Units of Issue and Quantities purchased will be cited in the individual order issued hereunder.

Limitations of Liability: Other Than High Value Item

Inspection: Destination Acceptance: Destination Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Standard Inspection

PERIOD OF PERFORMANCE TO BE CITED ON EACH TASK ORDER.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

52.246-3 INSPECTION OF SUPPLIES--COST-REIMBURSEMENT (MAY 2001)

(IAW FAR 46.303)

52.246-4 INSPECTION OF SERVICES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.304)

52.246-5 INSPECTION OF SERVICES--COST-REIMBURSEMENT (APR 1984)

(IAW FAR 46.305)

52.246-7 INSPECTION OF RESEARCH AND DEVELOPMENT--FIXED-PRICE (AUG 1996)

(IAW FAR 46.307(a))

52.246-8 INSPECTION OF RESEARCH AND DEVELOPMENT--COST-REIMBURSEMENT

(MAY 2001)

(IAW FAR 46.308)

52.246-8 INSPECTION OF RESEARCH AND DEVELOPMENT-- COST-REIMBURSEMENT --

ALTERNATE I (APR 1984)

(IAW FAR 46.308)

52.246-9 INSPECTION OF RESEARCH AND DEVELOPMENT (SHORT FORM) (APR 1984)

(IAW FAR 46.309)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

52.246-15 CERTIFICATE OF CONFORMANCE (APR 1984)

(IAW FAR 46.315, FAR 46.504)

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503) Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

Government Contract Quality Assurance Inspection and Acceptance will be at destination(s) specified herein (Final).

Item No(s): 0001, 0002, 0003, 0004, 0005, 0006, 0008, 0009, 0010, 0011

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.211-8 TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(2)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE

ITEM.

52.211-8 TIME OF DELIVERY -- ALTERNATE I (APR 1984)

(b) the Government will make award by .

52.211-8 TIME OF DELIVERY -- ALTERNATE II (APR 1984)

(b) the successful offeror will receive notice of award by .

52.211-8 TIME OF DELIVERY -- ALTERNATE III (APR 1984)

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997)

(IAW FAR 11.404(a)(3)) DELIVERY FOR EACH ITEM IS ANNOTATED IN THE SCHEDULE (PART I SECTION B) UNDER EACH LINE

ITEM.

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY -- ALTERNATE I (APR 1984)

(IAW FAR 11.404(a)(3))

(b) The delivery dates or specific periods above are based on the assumption that the Government will make award by ___*___.

*Item No *Government will make award by

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY -- ALTERNATE II (APR 1984)

(b) the successful offeror will receive notice of award by ______*_________

*Item No *Delivery Number *Government will make award by

52.211-9 DESIRED AND REQUIRED TIME OF DELIVERY -- ALTERNATE III (APR 1984)

52.211-16 VARIATION IN QUANTITY (APR 1984)

(IAW FAR 11.703(a))

(b) The permissible variation shall be limited to:

Percent increase (See individual line item(s)) Percent decrease (See individual line item(s)) This increase or decrease shall apply to (See individual line item(s)).

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989)

(IAW FAR 11.703(b))

52.211-18 VARIATION IN ESTIMATED QUANTITY (APR 1984)

(IAW FAR 11.703(c))

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

52.242-15 STOP-WORK ORDER -- ALTERNATE I (APR 1984)

(IAW FAR 42.1305(b)(2))

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c))

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

52.247-34 F.O.B. DESTINATION (NOV 1991)

(IAW FAR 47.303-6(c))

52.247-35 F.O.B. DESTINATION, WITHIN CONSIGNEE'S PREMISES (APR 1984)

(IAW FAR 47.303-7(c))

52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT-FURNISHED PROPERTY

(JUN 2003)

(IAW FAR 47.305-12(a)(2))

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC Other DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

FA8217-20-R-5010

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(IAW DFARS 201.602-70)

5352.201-9101 OMBUDSMAN (OCT 2019)

(IAW AFFARS 5301.9103)

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Lisette K. LeDuc at 801 777 -6549 , FAX 000 000 -0000 , email lisette.leduc@us.af.mil . Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

52.202-1 DEFINITIONS (JUN 2020)

(IAW FAR 2.201)

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(JUN 2020)

(IAW FAR 3.808(b))

52.203-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (JUN 2020)

(IAW FAR 3.1004(a))

52.203-14 DISPLAY OF HOTLINE POSTER(S) (JUN 2020)

(IAW FAR 3.1004(b), DFARS 203.1004(b)(2)(ii))

(3) Any required posters may be obtained as follows:

Poster(s) Obtain from ------------------ [For DoD:] DoD Inspector General, ------------------ ATTN: Defense Hotline, FA8217-20-R-5010

------------------ 400 Army Navy Drive ------------------ Washington, DC 22202-2884

52.203-17 CONTRACTOR EMPLOYEE WHISTLEBLOWER RIGHTS AND REQUIREMENT TO

INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (JUN 2020)

(IAW FAR 3.908-9)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER

DEFENSE-CONTRACT-RELATED FELONIES (DEC 2008)

(IAW DFARS 203.570-3)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(SEP 2013)

(IAW DFARS 203.970)

252.203-7004 DISPLAY OF HOTLINE POSTERS (MAY 2019)

(IAW DFARS 203.1004(b)(2)(ii))

52.204-1 APPROVAL OF CONTRACT (DEC 1989)

(IAW FAR 4.103)

52.204-2 SECURITY REQUIREMENTS (AUG 1996)

(IAW FAR 4.404(a))

52.204-2 SECURITY REQUIREMENTS -- ALTERNATE I (APR 1984)

(IAW FAR 4.404(b))

52.204-4 PRINTED OR COPIED DOUBLE-SIDED ON RECYCLED PAPER (MAY 2011)

(IAW FAR 4.303)

52.204-9 PERSONAL IDENTITY VERIFICATION OF CONTRACTOR PERSONNEL (JAN 2011)

(IAW FAR 4.1303)

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT

AWARDS (JUN 2020)

(IAW FAR 4.1403(a))

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

(IAW FAR 4.1105(b))

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (AUG 2020)

(IAW FAR 4.1804(c), FAR 12.301(d))

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS

(JUN 2016)

(IAW FAR 4.1903)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES

DEVELOPED OR PROVIDED BY KASPERSKY LAB AND OTHER COVERED

ENTITIES (JUL 2018)

(IAW FAR 4.2004)

252.204-7000 DISCLOSURE OF INFORMATION (OCT 2016)

(IAW DFARS 204.404-70(a))

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (APR 2020)

(IAW DFARS 204.7109(a))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7006 BILLING INSTRUCTIONS (OCT 2005)

(IAW DFARS 204.7109(b))

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR

REPORTED CYBER INCIDENT INFORMATION (OCT 2016)

(IAW DFARS 204.7304(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING (DEC 2019)

(IAW DFARS 204.7304(c))

5352.204-9000 NOTIFICATION OF GOVERNMENT SECURITY ACTIVITY AND VISITOR GROUP

SECURITY AGREEMENTS (OCT 2019)

(IAW AFFARS 5304.404-90)

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT

(IAW FAR 9.409)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (OCT 2018)

(IAW FAR 9.104-7(c))

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(NOV 2015)

(IAW FAR 9.108-5(b))

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(MAY 2019)

(IAW DFARS 209.409)

252.209-7009 ORGANIZATIONAL CONFLICT OF INTEREST--MAJOR DEFENSE ACQUISITION

PROGRAM (MAY 2019)

(IAW DFARS 209.571-8(b))

5352.209-9000 ORGANIZATIONAL CONFLICT OF INTEREST (OCT 2019)

(IAW AFFARS 5309.507-2)

52.210-1 MARKET RESEARCH (JUN 2020)

(IAW FAR 10.003)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000)

(IAW FAR 11.304)

52.211-11 LIQUIDATED DAMAGES--SUPPLIES, SERVICES OR RESEARCH AND

DEVELOPMENT (SEP 2000)

(IAW FAR 11.503(a))

(a) If the Contractor fails to deliver the supplies or perform the services within the time specified in this contract, the Contractor shall, in place of actual damages, pay to the Government liquidated damages of $ per calendar day of delay.

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b)) This is a rated order certified for national defense , emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS

(NOV 2005)

(IAW DFARS 211.273-4)

(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).

(d) (Offeror insert information for each SPI process)

SPI Process: _____________________________________________________

Facility: _________________________________________________________

Military or Federal Specification or Standard: ____________________________

Affected Contract Line Item Number, Subline Item Number, Component, or Element:

252.211-7007 REPORTING OF GOVERNMENT-FURNISHED PROPERTY (AUG 2012)

(IAW DFARS 211.274-6(b), DFARS 212.301(f)(iv))

252.211-7008 USE OF GOVERNMENT-ASSIGNED SERIAL NUMBERS (SEP 2010)

(IAW DFARS 211.274-6(c), DFARS 212.301(f)(xv))

52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)

(IAW FAR 15.209(b)(1))

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h), AFFARS 53.15.209(h))

52.215-10 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING DATA

(AUG 2011)

(IAW FAR 15.408(b))

52.215-11 PRICE REDUCTION FOR DEFECTIVE CERTIFIED COST OR PRICING

DATA--MODIFICATIONS (JUN 2020)

(IAW FAR 15.408(c))

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (JUN 2020)

(IAW FAR 15.408(d)(1))

52.215-13 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA--MODIFICATIONS

(IAW FAR 15.408(e)(1))

52.215-14 INTEGRITY OF UNIT PRICES (JUN 2020)

(IAW FAR 15.408(f)(1))

52.215-14 INTEGRITY OF UNIT PRICES -- ALTERNATE I (OCT 1997)

(IAW FAR 15.408(f)(2))

52.215-15 PENSION ADJUSTMENTS AND ASSET REVERSIONS (OCT 2010)

(IAW FAR 15.408(g))

52.215-18 REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS

(PRB) OTHER THAN PENSIONS (JUL 2005)

(IAW FAR 15.408(j))

52.215-19 NOTIFICATION OF OWNERSHIP CHANGES (OCT 1997)

(IAW FAR 15.408(k))

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS (JUN 2020)

(IAW FAR 15.408(m))

52.215-21 REQUIREMENTS FOR CERTIFIED COST OR PRICING DATA AND DATA OTHER

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS -- ALTERNATE I

(OCT 2010)

(IAW FAR 15.408(m)(1))

(b)(1) The Contractor shall submit certified cost or pricing data, data other than certified cost or pricing data, and supporting attachments prepared in the following format:

[Insert description of the data and format that are required and include access to records necessary to permit an adequate evaluation of the proposed price in accordance with 15.408, Table 15-2, Note 2. The description may be inserted at the time of issuing the solicitation, or the Contracting Officer may specify that the offeror’s format will be acceptable, or the description may be inserted as the result of negotiations.]

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS -- ALTERNATE II

(OCT 1997)

(IAW FAR 15.408(m)(2))

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS -- ALTERNATE III

(OCT 2010)

(IAW FAR 15.408(m)(3))

(c) Submit the cost portion of the proposal via the following electronic media:

THAN CERTIFIED COST OR PRICING DATA--MODIFICATIONS -- ALTERNATE IV

(OCT 2010)

(IAW FAR 15.408(m)(4))

(b) Provide information described below:

[Insert description of the data and the format that are required, including the access to records necessary to permit an adequate evaluation of the proposed price in accordance with 15.403-3.]

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)

(IAW FAR 15.408(n)(2))

52.215-23 LIMITATIONS ON PASS-THROUGH CHARGES -- ALTERNATE I (OCT 2009)

(IAW FAR 15.408(n)(2)(iii))

252.215-7002 COST ESTIMATING SYSTEM REQUIREMENTS (DEC 2012)

(IAW DFARS 215.408(1))

252.215-7006 USE OF EMPLOYEES OR INDIVIDUAL SUBCONTRACTORS WHO ARE MEMBERS

OF THE SELECTED RESERVE (OCT 2008)

(IAW DFARS 215.370-3(b))

52.216-7 ALLOWABLE COST AND PAYMENT (AUG 2018)

(IAW FAR 16.307(a))

(a) Invoicing.

(3) The designated payment office will make interim payments for contract financing on the _30th day

52.216-7 ALLOWABLE COST AND PAYMENT--ALTERNATE II (AUG 2012)

(IAW FAR 16.307(a)(3))

52.216-8 FIXED FEE (JUN 2011)

(IAW FAR 16.307(b))

52.216-11 COST CONTRACT--NO FEE (APR 1984)

(IAW FAR 16.307(e)(1))

52.216-11 COST CONTRACT--NO FEE -- ALTERNATE I (APR 1984)

(IAW FAR 16.307(e)(2))

52.216-18 ORDERING (AUG 2020)

(IAW FAR 16.506(a))

(a) Such orders may be issued from .

52.216-19 ORDER LIMITATIONS (OCT 1995)

(IAW FAR 16.506(b))

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than , the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor--

(1) Any order for a single item in excess of ;

(2) Any order for a combination of items in excess of ; or

(3) A series of orders from the same ordering office within days that together call for quantities exceeding the limitation in subparagraph (b)(1) or (2) of this section.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section.

(d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source.

52.216-22 INDEFINITE QUANTITY (OCT 1995)

(IAW FAR 16.506(e))

(d) Contractor shall not be required to make any deliveries under this contract after .

252.217-7027 CONTRACT DEFINITIZATION (DEC 2012)

(IAW DFARS 216.603-4(b)(3), DFARS 217.7402, DFARS 217.7406(b))

(a) A *********************************** is contemplated. The Contractor agrees to submit a *********************************** proposal and certified cost or pricing data supporting its proposal.

(b) The schedule for definitizing this contract is as follows:

Definitization: *** Submission of Proposal: *** Begin Negotiations: *** Submission of Make or Buy Plan: *** Submission of Subcontracting Plan: *** Submission of Certified Cost or Pricing Data: ***

(d) The definitive contract resulting from this undefinitized contract action will include a negotiated in no event to exceed $ .

52.222-2 PAYMENT FOR OVERTIME PREMIUMS (JUL 1990)

(IAW FAR 22.103-5(b))

(a) overtime premium does not exceed ___*___

*Overtime Premium $

52.222-3 CONVICT LABOR (JUN 2003)

(IAW FAR 22.202)

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015)

(IAW FAR 22.810(a)(1))

52.222-26 EQUAL OPPORTUNITY (SEP 2016)

(IAW FAR 22.810(e))

52.222-35 EQUAL OPPORTUNITY FOR VETERANS (JUN 2020)

(IAW FAR 22.1310(a)(1), DFARS 222.1310(a)(1))

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUN 2020)

(IAW FAR 22.1408(a))

52.222-37 EMPLOYMENT REPORTS ON VETERANS (JUN 2020)

(IAW FAR 22.1310(b))

52.222-40 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR

RELATIONS ACT (DEC 2010)

(IAW FAR 22.1605)

52.222-41 SERVICE CONTRACT LABOR STANDARDS (AUG 2018)

(IAW FAR 22.1006(a))

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 2014)

(IAW FAR 22.1006(b)) This Statement is for Information Only:

It is not a Wage Determination

Employee Class Monetary Wage Fringe Benefits

52.222-43 FAIR LABOR STANDARDS ACT AND SERVICE CONTRACT LABOR

STANDARDS--PRICE ADJUSTMENT (MULTIPLE YEAR AND OPTION CONTRACTS)

(AUG 2018)

(IAW FAR 22.1006(c)(1))

52.222-50 COMBATING TRAFFICKING IN PERSONS (JAN 2019)

(IAW FAR 22.1705(a)(1))

52.222-54 EMPLOYMENT ELIGIBILITY VERIFICATION (OCT 2015)

(IAW FAR 22.1803)

(c) Web site. Information on registration for and use of the E-Verify program can be obtained via the Internet at the Department of Homeland Security Web site: http://www.dhs.gov/E-Verify .

52.222-55 MINIMUM WAGES UNDER EXECUTIVE ORDER 13658 (DEC 2015)

(IAW FAR 22.1906)

52.222-62 PAID SICK LEAVE (EXECUTIVE ORDER 13706) (JAN 2017)

(IAW FAR 22.2110)

252.222-7006 RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS

(DEC 2010)

(IAW DFARS 222.7405)

52.223-5 POLLUTION PREVENTION AND RIGHT-TO-KNOW INFORMATION (MAY 2011)

(IAW FAR 23.1005(a))

52.223-6 DRUG-FREE WORKPLACE (MAY 2001)

(IAW FAR 23.505)

52.223-10 WASTE REDUCTION PROGRAM (MAY 2011)

(IAW FAR 23.705(a))

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (JUN 2020)

(IAW FAR 23.1105)

52.223-19 COMPLIANCE WITH ENVIRONMENTAL MANAGEMENT SYSTEMS (MAY 2011)

(IAW FAR 23.903)

252.223-7004 DRUG-FREE WORK FORCE (SEP 1988)

(IAW DFARS 223.570-2)

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR

HAZARDOUS MATERIALS--BASIC (SEP 2014)

(IAW DFARS 223.7106)

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi))

5352.223-9000 ELIMINATION OF USE OF CLASS I OZONE DEPLETING SUBSTANCES (ODS)

(OCT 2019)

(IAW AFFARS 5323.804-90)

5352.223-9001 HEALTH AND SAFETY ON GOVERNMENT INSTALLATIONS (OCT 2019)

(IAW AFFARS 5323.9001)

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008)

(IAW FAR 25.1103(a))

252.225-7004 REPORT OF INTENDED PERFORMANCE OUTSIDE THE UNITED STATES AND

CANADA -- SUBMISSION AFTER AWARD (MAY 2019)

(IAW DFARS 225.7204(b))

252.225-7013 DUTY-FREE ENTRY (DEVIATION 2020-O0019) (JUL 2020)

(IAW Deviation 2020-O0019)

252.225-7969 ACQUISITION OF DINNERWARE AND STAINLESS STEEL FLATWARE (DEVIATION

2020-O0017) (JUN 2020)

(IAW Deviation 2020-O0017)

252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT

SYSTEMS (DEVIATION 2020-O0015) (MAY 2020)

(IAW Deviation 2020-O0015)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS

(APR 2019)

(IAW DFARS 226.104)

52.227-1 AUTHORIZATION AND CONSENT (JUN 2020)

(IAW FAR 27.201-2(a)(1))

52.227-1 AUTHORIZATION AND CONSENT -- ALTERNATE I (APR 1984)

(IAW FAR 27.201-2(a)(2))

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (JUN 2020)

(IAW FAR 27.201-2(b))

52.227-5 WAIVER OF INDEMNITY (APR 1984)

(IAW FAR 27.201-2(e)) Any provision or clause of this contract to the contrary notwithstanding, the Government hereby authorizes and consents to the use and manufacture, solely in performing this contract, of any invention covered by the United States patents identified below and waives indemnification by the Contractor with respect to such patents:

52.227-9 REFUND OF ROYALTIES (APR 1984)

(IAW FAR 27.202-5(c))

52.227-10 FILING OF PATENT APPLICATIONS--CLASSIFIED SUBJECT MATTER (DEC 2007)

(IAW FAR 27.203-2)

52.227-11 PATENT RIGHTS--OWNERSHIP BY THE CONTRACTOR (MAY 2014)

(IAW FAR 27.303(b)(1))

52.227-14 RIGHTS IN DATA--GENERAL (MAY 2014)

(IAW FAR 27.409(b)(1))

52.227-16 ADDITIONAL DATA REQUIREMENTS (JUN 1987)

(IAW FAR 27.409(d))

52.227-19 COMMERCIAL COMPUTER SOFTWARE LICENSE (DEC 2007)

(IAW FAR 27.409(g))

52.227-21 TECHNICAL DATA DECLARATION, REVISION, AND WITHHOLDING OF

PAYMENT--MAJOR SYSTEMS (MAY 2014)

(IAW FAR 27.409(j))

52.227-22 MAJOR SYSTEM--MINIMUM RIGHTS (JUN 1987)

(IAW FAR 27.409(k))

52.227-23 RIGHTS TO PROPOSAL DATA (TECHNICAL) (JUN 1987)

(IAW FAR 27.409(l)) Except for data contained on pages *********************************** , it is agreed that as a condition of award of this contract, and notwithstanding the conditions of any notice appearing thereon, the Government shall have unlimited rights (as defined in the "Rights in Data--General" clause contained in this contract) in and to the technical data contained in the proposal dated -*** - , upon which this contract is based.

252.227-7000 NON-ESTOPPEL (OCT 1966)

(IAW DFARS 227.7009-1(e))

252.227-7001 RELEASE OF PAST INFRINGEMENT (SEP 2019)

(IAW DFARS 227.7009-2(a))

252.227-7013 RIGHTS IN TECHNICAL DATA--NONCOMMERCIAL ITEMS (FEB 2014)

(IAW DFARS 227.7102-4(b), DFARS 227.7103-6(a))

(e) (3) The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following technical data should be restricted—

Technical Data to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

*If the assertion is applicable to items, components, or processes developed at private expense, identify both the data and each such item, component, or process.

**Generally, the development of an item, component, or process at private expense, either exclusively or partially, is the only basis for asserting restrictions on the Government's rights to use, release, or disclose technical data pertaining to such items, components, or processes. Indicate whether development was exclusively or partially at private expense. If development was not at private expense, enter the specific reason for asserting that the Government's rights should be restricted.

***Enter asserted rights category (e.g., government purpose license rights from a prior contract, rights in SBIR data generated under another contract, limited or government purpose rights under this or a prior contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ___________________________________ Printed Name ___________________________________ and Title ___________________________________ Signature ___________________________________

(End of identification and assertion)

(f) (2) Government purpose rights markings.

Data delivered or otherwise furnished to the Government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address

Expiration Date __________________________________

FA8217-20-R-5010

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(2) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Limited rights markings.

Data delivered or otherwise furnished to the Government with limited rights shall be marked with the following legend:

LIMITED RIGHTS

Contract No __________________________________ Contractor Name __________________________________ Contractor Address __________________________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data--Noncommercial Items clause contained in the above identified contract. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such data must promptly notify the above name Contractor.

(End of legend)

(4) Special license rights markings.

(i) Data in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's rights to use, modify, reproduce, release, perform, display, or disclose these data are restricted by Contract No. __________ (Insert contract number)_______, License No. __________ (Insert license identifier)______. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

252.227-7014 RIGHTS IN NONCOMMERCIAL COMPUTER SOFTWARE AND NONCOMMERCIAL

COMPUTER SOFTWARE DOCUMENTATION (FEB 2014)

(IAW DFARS 227.7203-6(a)(1))

(e) Identification and delivery of computer software and computer software documentation to be furnished with restriction on use, release, or disclosure.

(1) This paragraph does not apply to restrictions based solely on copyright.

(2) Except as provided in paragraph (e)(3) of this clause, computer software that the Contractor asserts should be furnished to the Government with restrictions on use, release, or disclosure is identified in an attachment to this contract (the Attachment). The Contractor shall not deliver any software with restrictive markings unless the software is listed on the Attachment.

(3) In addition to the assertions made in the Attachment, other assertions may be identified after award when based on new information or inadvertent omissions unless the inadvertent omissions would have materially affected the source selection decision. Such identification and assertion shall be submitted to the Contracting Officer as soon as practicable prior to the scheduled data for delivery of the software, in the following format, and signed by an official authorized to contractually obligate the Contractor:

Identification and Assertion of Restrictions on the Government's Use, Release, or Disclosure of Computer Software.

The Contractor asserts for itself, or the persons identified below, that the Government's rights to use, release, or disclose the following computer software should be restricted:

Computer Software to be Furnished With Restrictions*

Basis for Assertion**

Asserted Rights Category***

Name of Person Asserting Restrictions****

(LIST) (LIST) (LIST) (LIST)

FA8217-20-R-5010

*Generally, development at private expense, either exclusively or partially, is the only basis for asserting restriction on the Government's rights to use, release, or disclose computer software.

**Indicate whether development was exclusively or partially at private expense. If development was not a private expense, enter the specific reason for asserting that the Government's right should be restricted.

***Enter asserted rights category (e.g., restricted or government purpose rights in computer software, government purpose license rights from a prior contract, rights in SBIR software generated under another contract, or specifically negotiated licenses).

****Corporation, individual, or other person, as appropriate.

Date ____________________________ Printed Name and Title

Signature ____________________________

(End of identification and assertion)

(4) When requested by the Contracting Officer, the Contractor shall provide sufficient information to enable the Contracting Officer to evaluate the Contractor's assertions. The Contracting Officer reserves the right to add the Contractor's assertions to the Attachment and validate any listed assertion, at a later date, in accordance with the procedures of the Validation of Asserted Restriction--Computer Software clause of this contract.

(f) Marking requirements. The Contractor, and its subcontractors or suppliers, may only assert restrictions on the Government's right to use, modify, reproduce, release, perform, display, or disclose computer software by marking the deliverable software or documentation subject to restriction. Except as provided in paragraph (f)(5) of this clause, only the following legends are authorized under this contract; the government purpose rights legend at paragraph (f)(2) of this clause; the restricted rights legend at paragraph (f)(3) of this clause; or the special license rights legend at paragraph (f)(4) of this clause; and/or a notice of copyright as prescribed under 17 U.S.C. 401 or 402.

(1) General marking instructions. The Contractor, or its subcontractors or suppliers, shall conspicuously and legibly mark the appropriate legend on all computer software that qualify for such markings. The authorized legends shall be placed on the transmitted document or software storage container and each page, or portions thereof, of printed material containing computer software for which restrictions are asserted.

Computer software transmitted directly from one computer or computer terminal to another shall contain a notice of asserted restrictions. However, instructions that interfere with or delay the operation of computer software in order to display a restrictive rights legend or other license statement at any time prior to or during use of the computer software, or otherwise cause such interference or delay, shall not be inserted in software that will or might be used in combat or situations that simulate combat conditions, unless the Contracting Officer's written permission to deliver such software has been obtained prior to delivery.

Reproductions of computer software or any portions thereof subject to asserted restrictions, shall also reproduce the asserted restrictions.

(2) Government purpose rights markings. Computer software delivered or otherwise furnished to the Government with government purpose rights shall be marked as follows:

GOVERNMENT PURPOSE RIGHTS

Contract No _____________________ Contractor Name _____________________ Contractor Address _____________________

Expiration Date _____________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose this software are restricted by paragraph (b)(2) of the Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation clause contained in the above identified contract. No restrictions apply after the expiration date shown above. Any reproduction of the software or portions thereof marked with this legend must also reproduce the markings.

(End of Legend)

(3) Restricted rights markings. Software delivered or otherwise furnished to the Government with restricted rights shall be marked with the following legend:

RESTRICTED RIGHTS

FA8217-20-R-5010

Contract No _____________________ Contractor Name _____________________ Contractor Address _____________________

The Government's rights to use, modify, reproduce, release, perform, display, or disclose this software are restricted by paragraph (b)(3) of the Rights in Noncommercial Computer Software and Noncommercial Computer Software Documentation clause contained in the above identified contract. Any reproduction of computer software or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such software must promptly notify the above named Contractor.

(End of legend)

(4) Special license rights markings.

(i) Computer software or computer documentation in which the Government's rights stem from a specifically negotiated license shall be marked with the following legend:

SPECIAL LICENSE RIGHTS

The Government's right to use, modify, reproduce, release, perform, display, or disclose this software are restricted by Contract No.__________ (Insert contract number)_______, License No._____ (Insert license identifier)______. Any reproduction of computer software, computer software documentation, or portions thereof marked with this legend must also reproduce the markings.

(End of legend)

252.227-7016 RIGHTS IN BID OR PROPOSAL INFORMATION (JAN 2011)

(IAW DFARS 227.7103-6(e)(1), DFARS 227.7104(e)(1), DFARS 227.7203-6(b))

252.227-7019 VALIDATION OF ASSERTED RESTRICTIONS--COMPUTER SOFTWARE (SEP 2016)

(IAW DFARS 227.7104(e)(3), DFARS 227.7203-6(c))

252.227-7025 LIMITATIONS ON THE USE OR DISCLOSURE OF GOVERNMENT-FURNISHED

INFORMATION MARKED WITH RESTRICTIVE LEGENDS (MAY 2013)

(IAW DFARS 227.7103-6(c), DFARS 227.7104(f)(1), DFARS 227.7203-6(d))

252.227-7026 DEFERRED DELIVERY OF TECHNICAL DATA OR COMPUTER SOFTWARE

(APR 1988)

(IAW DFARS 227.7103-8(a))

252.227-7027 DEFERRED ORDERING OF TECHNICAL DATA OR COMPUTER SOFTWARE

(APR 1988)

(IAW DFARS 227.7103-8(b))

252.227-7030 TECHNICAL DATA--WITHHOLDING OF PAYMENT (MAR 2000)

(IAW DFARS 227.7103-6(e)(2), DFARS 227.7104(e)(4))

(a) the Contracting Officer may until such data is accepted by the Government, withhold payment to the Contractor of ten percent (10%) of the total contract price or amount

252.227-7037 VALIDATION OF RESTRICTIVE MARKINGS ON TECHNICAL DATA (SEP 2016)

(IAW DFARS 227.7102-4(c), DFARS 227.7103-6(e)(3), DFARS 227.7104(e)(5), DFARS 227.7203-6(f))

52.228-5 INSURANCE--WORK ON A GOVERNMENT INSTALLATION (JAN 1997)

(IAW FAR 28.310)

52.228-7 INSURANCE--LIABILITY TO THIRD PERSONS (MAR 1996)

(IAW FAR 28.311-1)

52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)

(FEB 2013)

(IAW FAR 29.401-3(b))

52.230-2 COST ACCOUNTING STANDARDS (JUN 2020)

(IAW FAR 30.201-4(a)(1))

52.230-3 DISCLOSURE AND CONSISTENCY OF COST ACCOUNTING PRACTICES

(IAW FAR 30.201-4(b)(1))

52.230-5 COST ACCOUNTING STANDARDS--EDUCATIONAL INSTITUTION (DEVIATION

2018-O0015) (MAY 2018) (MAY 2018)

(IAW DARS Tracking Number: 2018-O0015)

52.230-6 ADMINISTRATION OF COST ACCOUNTING STANDARDS (JUN 2010)

(IAW FAR 30.201-4(d)(1))

252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)

(IAW DFARS 231.100-70)

52.232-2 PAYMENTS UNDER FIXED-PRICE RESEARCH AND DEVELOPMENT CONTRACTS

(APR 1984)

(IAW FAR 32.111(a)(2))

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1))

52.232-9 LIMITATION ON WITHHOLDING OF PAYMENTS (APR 1984)

(IAW FAR 32.111(b)(2))

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2))

52.232-16 PROGRESS PAYMENTS (JUN 2020)

(IAW FAR 32.502-4(a))

(l) Due date. The designated payment office will make progress payments on the 30th day after the designated billing office receives a proper progress payment request.