Labeling Examples.pdf
PDF 379 KB Posted
- Attached to
- Professional, Administrative and Management Support Services Federal contract opportunity
- Solicitation number
- FA8217-11-R-72515
About this file
Labeling Examples
View the file
Other files for this federal contract opportunity
Show all 35
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Labeling Examples
1. Marking and Labeling
Each module and kit transit/transport case shall be marked to provide the users with information about the contents without having to open the case. The standard label/marking material shall be white vinyl material, elevation .004 inches, shiny white backing, shiny black copy, and black border 1/8 inch wide.
Labels and marking tape for Theater Deployable Communications equipment has been procured from Lustre-Cal.
Lustre-Cal Nameplate Corporation PO Box 429 110 E Turner Road Lodi, CA 95240 1-800-435-2235 1-209-334-2610 (fax)
1.1 Marking
1.1.1 Module Marking
The module marking shall be a two-inch wide color-coded diagonally striped tape surrounding the transit case; the marking tape shall make each module distinctly visually identifiable. The diagonal strip shall be 1 inch wide. The stripe shall be angled from the right to left on the tape at a 45-degree angle. On the module, the tape shall be applied above the lower set of handles. Table 3 defines the color combinations for each type of TDC module.
The module tape dimensions are depicted in Figure 1 below:
Module Tape Dimensions
Module color code standards are listed in Table 1 below:
Component Module Color Code VSAT Terminal Yellow and Black ICAP Basic Access Module White and Buff FCC-100 (Satellite) White and Blue FCC-100 (Tactical) Orange and White
FTSAT Baseband Module White and Green Laser Module Yellow and Buff Large Voice Module White and Gray P-Mux 400 Module White and Purple P-Mux 800 Module (Base and Expansion) Orange and Purple Radio Frequency Module v3 Purple and Black Red Data Module Red and Gray Red Router Module v2 Red and White Secure Voice Module Red and Buff STE-R Module Blue and Buff TSSR Interface Unit Yellow and White RFMOW Module (FTSAT) Red and Orange RFMOW Module (VSAT) Red and Blue Wireless Access Module (WAM) Black and Blue Wireless Distribution Module (WDM) Green and Purple Radio Gateway Module (RGM) Red and Yellow NCC-D All Modules Gray and Blue ICE v3 Satellite Modem Module Red and Blue Small Access Module Purple and Gray ICE Crypto Module Red and Black Network Encryption Module Red and Green SPICE All Modules Yellow and Purple
Table 1 Module Color Codes
Table 2 provides a general summary of the labels necessary on all transit cases except the small transit cases (4U). Labeling examples are provided in Figures 2 and 3.
Module Labeling
Location on Transit Case
Contents Label Size Type Size
Front Cover (removable)
FRONT 1.60” high by 5” long 1” high letters
Back Cover (removable)
BACK 1.60” high by 5” long 1” high letters
Top, Both Sides BACK (with arrows) 1.60” high by 5” long 1” high letters
Top TOP 1.60” high by 2.75” long 1” high letters
Both sides TOP (with arrows) 1.60” high by 5” long 1” high letters
Top, Both Sides, Front/Back Cover
CAUTION
XXX pounds maximum XX.X cubic feet maximum
3” high by 5” long Caution – yellow background with 1/2” high letters Weight and cube – 1/4” high letters
Top, Both Sides THIS EQUIPMENT OPERATES
ON 120/240 VAC, 50-60 HZ
1.5” high by 5” long 3/8” letters
Top, Both Sides, Front/Back Cover
Writing Surface 3” high by 5” long .10” high all around border
Top, Both Sides* A or B 2” high by 1.5” long Top, Both Sides** CCI 5/8” high by 1.5” long As appropriate HAZMAT Label According to laws and regulations
Table 2 Module Labeling
* Required only on all RFM Modules **Required on all modules containing COMSEC Controlled Items
A summary of the labeling necessary on small (4U) transit cases is provided in Table 3. Small transit case labeling examples are provided in Figures 3 and 4.
Small Module Labeling
Location Contents Label Size Type Size
Front Cover (removable)
FRONT 1.60” high by 5” long 1” high letters
Back Cover (removable)
BACK 1.60” high by 5” long 1” high letters
Top, Both Sides BACK (with arrows) 1.60” high by 5” long 1” high letters
Top TOP 1.60” high by 2.75” long 1” high letters
Top CAUTION XXX pounds maximum XX.X cubic feet maximum
3” high by 5” long Caution – yellow background with 1/2” high letters Weight and cube – 1/4” high letters
Top THIS EQUIPMENT
OPERATES ON 120/240
VAC, 50-60 HZ
1.5” high by 5” long 3/8” letters
Top, Both Sides, Front/Back Cover*
Writing Surface 2.5” high by 4.75” long .10” high all around border
As appropriate HAZMAT Label According to laws and regulations
Table 3 Small Module Labeling
* Note that the writing surface is reduced on the small transit case
Figures 2 and 3 are general transit case labeling examples.
General Module Transit Case Labeling (Side View)
Kit Transport Case (Front & Back View)
Figures 4 and 5 are small transit case (4U) labeling examples.
Small Transit Case Labeling (Side/Top View)
Small Transit Case Labeling (End View)
Kit Labeling
Table 4 provides a summary of the labels necessary for all kits.
Location Contents Label Size Type Size
Top TOP 1.60” high by 2.75” long 1” high letters
Both Sides TOP (with arrows) 1.60” high by 5” long 1” high letters
Top, Both Sides
CAUTION
X man lift XXX pounds maximum XX.X cubic feet maximum
3” high by 5” long Caution – yellow background with 1/2” high letters Weight and cube – 1/4” high letters
Top, Both Sides*
THIS EQUIPMENT OPERATES
ON 120/240 VAC, 50-60 HZ
1.5” high by 5” long 3/8” letters
Top, four Sides
Writing Surface 3” high by 5” long .10” high all around border
As appropriate HAZMAT Label According to laws and regulations
Table 4 Labeling summary for all kits
* As appropriate
Figures 6 and 7 are labeling examples of a kit transport case.
Kit Transport Case (Top view)
General Transport case Labeling (End View)
File details come from the government source that posted it. Updated .