07 SPECIAL PACKAGING INSTRUCTION.pdf

PDF 8 MB Posted

Attached to
Cartridge Actuated Device (CAD)/ Propellant Actuated Device (PAD) in support of B-1, C-17, T-6 Aircrafts | FA8213-22-R-3025
Solicitation number
FA8213-22-R-3025
Issued by

View the file

Other files

File Type Posted
01A2 NSN.pdf PDF
06 SOW PACKAGING.pdf PDF
01A1 REPSHIP.pdf PDF
01 AIRMUNITION SPECIFICATION.pdf PDF
11 GFPFA821322R3025_1.pdf PDF
05 REWORK AND REPAIR OF NONCONFORMING MATERIAL.pdf PDF
08 QUALITY ASSURANCE LETTER of INSTRUCTION.pdf PDF
10 ITEM DESCRIPTION.pdf PDF
09 ENGINEERING DATA LIST.pdf PDF
02 SOW AMMUNITION DATA CARDS.pdf PDF
12 JUSTIFICATION FOR QUALIFICATION REQUIREMENTS.pdf PDF
Exhibit A CONTRACT DATA REQUIREMENTS LIST.pdf PDF
03 REPSHIP Data Requirement 11 Mar 14.pdf PDF
00 FA821322R3025.pdf PDF
04 CADPAD ITEM MARKING INSTRUCTION.pdf PDF
Show all 15

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 12 FEBRUARY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

MUNITION NOTICES

NOTES

1. MAY PACK UP TO 10 EACH ITEMS PER SHIPPING CONTAINER.

2. WRAP ITEM USING REF.-3, PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL. PLACE IN SHIPPING CONTAINER AND

USE REF.-1 TO CUSHION AND PREVENT MOVEMENT, AND PREVENT ITEM FROM TOUCHING CONTAINER WALLS.

3. SEAL CONTAINER USING REF.-4.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

REFER TO MIL-STD-129 FOR MARKING

REQUIREMENTS OF PALLETIZED UNIT

LOADS OF AMMUNITION.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 28 JANUARY 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

DD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-658-8542

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-658-8542

AutoCAD SHX Text

B) PROPER SHIPPING NAME: FUZES, DETONATING

AutoCAD SHX Text

PACKAGING WAS MANUFACTURED.

AutoCAD SHX Text

C) UN POP MARKING:

AutoCAD SHX Text

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

AutoCAD SHX Text

CLOSURE:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

USA/DOD/AF70

AutoCAD SHX Text n

AutoCAD SHX Text 4G/Y8/S/**

AutoCAD SHX Text

UN0367

AutoCAD SHX Text u

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

UNSERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

MULTIPLE PART NUMBERS

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

INITIATOR, CARTRIDGE ACTUATED

AutoCAD SHX Text 17278

AutoCAD SHX Text

DATE

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

1377-01-658-8542 ES

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

REV

AutoCAD SHX Text P.S.

AutoCAD SHX Text

ILL.

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DODPOPHM/USA/DOD/AF70/TR17034

AutoCAD SHX Text

SHEET 1 OF 4

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text A

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LTR

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

ASTM D6251

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

DATE

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

AutoCAD SHX Text 16 3/4

AutoCAD SHX Text

AutoCAD SHX Text 1.043

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

K. KNIGHTON D. HALE J. BURLEIGH N. CORONADO

AutoCAD SHX Text F01-658-8542

AutoCAD SHX Text

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

RSC

AutoCAD SHX Text

III

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text

IAW: ASTM D1974 SEALING METHOD C

AutoCAD SHX Text

IAW: ASTM D6251

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE

AutoCAD SHX Text 19028

AutoCAD SHX Text A

1. MAY PACK UP TO 6 EACH ITEMS PER SHIPPING CONTAINER.

2. WRAP ITEM USING REF.-3, PLACE IN BARRIER BAG REF.-2, REMOVE AIR AND SEAL. PLACE IN SHIPPING CONTAINER AND

USE REF.-1 TO CUSHION AND PREVENT MOVEMENT.

3. SEAL CONTAINER USING REF.-4.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

MUNITION NOTICES

NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

NOTICE 4: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 2 OF 4

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text A/R 1 1 A/R

AutoCAD SHX Text

TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING

AutoCAD SHX Text

3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

AutoCAD SHX Text ASTM D5486 TYPE I OR V MIL-PRF-81705 TYPE III, CLASS 1 OR 2 MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II, CLASS B

AutoCAD SHX Text -4 -3 -2 -1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F01-658-8542

INITIATOR, CARTRIDGE ACTUATED

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 4

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-658-8542

AutoCAD SHX Text

INITIATOR, CARTRIDGE ACTUATED

AutoCAD SHX Text

ITEM REFERENCE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

LOADS OF AMMUNITION.

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 4

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 20 1 2 2 2 1

AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY

AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48

AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1

AutoCAD SHX Text -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

40 BOXES @ 14 LBS NET PALLET WT PLYWOOD WT STRAPPING WT

AutoCAD SHX Text

AutoCAD SHX Text

560 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS

AutoCAD SHX Text

643.35 LBS

AutoCAD SHX Text

CUBE OF PALETIZED LOAD = 48.4

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text F01-658-8542

INITIATOR, CARTRIDGE ACTUATED

NOTICE 1: CLASS 1 (EXPLOSIVE) MATERIAL OWNED BY THE DEPARTMENT OF DEFENSE (DOD) PACKAGED PRIOR TO

JANUARY 1, 1990 IN ACCORDANCE WITH THE PACKAGING REQUIREMENTS IN EFFECT AT THAT TIME ARE EXCEPTED FROM

THE REQUIREMENTS OF PERFORMANCE ORIENTED PACKAGING (POP) PROVIDED THE PACKAGING HAVE MAINTAINED THEIR

INTEGRITY AND THE GOODS ARE DECLARED AS GOVERNMENT OWNED GOODS PACKAGED PRIOR TO JANUARY 1, 1990. THIS

CLAUSE DOES NOT APPLY TO COMMERCIAL AIR SHIPMENTS. (REF DLAD 4145.41/AFJI 24-210.)

NOTICE 2: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE "OVERBOX". THE SIZE AND

WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF

ASTM-D4727, CF, DOM, GR 275 (OR EQUAL) TO ASSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 3: VARIATIONS TO THE PACKAGING REQUIREMENTS OF THE SPI ARE AUTHORIZED IN ACCORDANCE WITH TITLE 49

CFR 178.601(G)(4), VARIATION 4.

NOTICE 4: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING IF

THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 5: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 6: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD

CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER MUST ACCOMPANY

EACH SHIPMENT.

NOTES

1. WRAP ITEM WITH REF.-4, PLACE WRAPPED ITEM INSIDE BAG, REF.-3 AND SEAL.

2. PLACE BAGGED ASSET IN SHIPPING CONTAINER, REF.-1 USING SUFFICIENT CUSHIONING, REF.-2 TO PREVENT

MOVEMENT. SEAL CONTAINER WITH TAPE, REF.-5.

3. PLACE UP TO 10 (TEN) BAGGED ITEMS INTO SHIPPING CONTAINER REF.-1

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS

LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING

MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT)

MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS

REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR

REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 18 JULY 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

NOTE: THE ABOVE POP MARKINGS

ARE FOR DOD USE ONLY.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

DD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F00-280-0272

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F00-280-0272

AutoCAD SHX Text

B) PROPER SHIPPING NAME: CARTRIDGES, POWER DEVICE

AutoCAD SHX Text

PACKAGING WAS MANUFACTURED.

AutoCAD SHX Text

C) UN POP MARKING:

AutoCAD SHX Text

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

AutoCAD SHX Text

CLOSURE:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

USA/DOD/AF70

AutoCAD SHX Text n

AutoCAD SHX Text 4G/Y25/S/**

AutoCAD SHX Text

UN0323

AutoCAD SHX Text u

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

UNSERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

MULTIPLE PART NUMBERS

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER

AutoCAD SHX Text 94031

AutoCAD SHX Text

DATE

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

1377-00-280-0272 ES

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

REV

AutoCAD SHX Text P.S.

AutoCAD SHX Text

ILL.

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DODPOPHM/USA/DOD/AF70/TR14023

AutoCAD SHX Text

SHEET 1 OF 5

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text A

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LTR

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

ASTM D6251

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

DATE

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

AutoCAD SHX Text 16 3/4

AutoCAD SHX Text

AutoCAD SHX Text 1.043

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

D. NAY J. BURLEIGH J. HARMON N. CORONADO

AutoCAD SHX Text F00-280-0272

AutoCAD SHX Text

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

RSC

AutoCAD SHX Text

III

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text U

AutoCAD SHX Text

IAW: ASTM D1974 SEALING METHOD C

AutoCAD SHX Text

IAW: ASTM D6251

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 41

AutoCAD SHX Text T

AutoCAD SHX Text CHANGED TEST REPORT FROM 99004 TO 14023. REMOVED CONTAINER FROM BILL OF MATERIALS

AutoCAD SHX Text 15029

AutoCAD SHX Text

AutoCAD SHX Text U

AutoCAD SHX Text

ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE, ADDED MMAC CODE

18205

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 2 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text A/R A/R 1 A/R

AutoCAD SHX Text

TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING

AutoCAD SHX Text

3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

AutoCAD SHX Text ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II, CLASS A OR B

AutoCAD SHX Text -4 -3 -2 -1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F00-280-0272

CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER

1. PLACE UP TO 54 BAGGED ITEMS IN CONTAINER. NOT TO EXCEED THE POP TESTED WEIGHT.

2. WRAP ITEM WITH REF.-3 AND PLACE INTO REF.-2 BARRIER BAG. EXPEL AIR AND SEAL.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

MUNITION NOTICES

NOTICE 1 : FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 3 OF 5

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text F00-280-0272

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F00-280-0272

AutoCAD SHX Text

CARTRIDGE, AIRCRAFT FIRE EXTINGUISHER

AutoCAD SHX Text -3

AutoCAD SHX Text -2

AutoCAD SHX Text -1

AutoCAD SHX Text -4

AutoCAD SHX Text

ITEM REFERENCE

AutoCAD SHX Text

LOADS OF AMMUNITION.

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 20 1 2 2 2 1

AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY

AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48

AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1

AutoCAD SHX Text -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

40 BOXES @ 12 LBS NET PALLET WT PLYWOOD WT STRAPPING WT

AutoCAD SHX Text

AutoCAD SHX Text

480 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS

AutoCAD SHX Text

563.35 LBS

AutoCAD SHX Text

CUBE OF PALETIZED LOAD = 48.4

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text F00-280-0272

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 04 APRIL 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

DD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-167-6621

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-167-6621

AutoCAD SHX Text

B) PROPER SHIPPING NAME:

AutoCAD SHX Text

PACKAGING WAS MANUFACTURED.

AutoCAD SHX Text

C) UN POP MARKING:

AutoCAD SHX Text

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

AutoCAD SHX Text

CLOSURE:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

USA/DOD/AF70

AutoCAD SHX Text n

AutoCAD SHX Text 4G/Y25/S/**

AutoCAD SHX Text u

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

UNSERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

MULTIPLE PART NUMBERS

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

INITIATOR, PROPELLANT ACTUATED

AutoCAD SHX Text 14233

AutoCAD SHX Text

DATE

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

1377-01-167-6621 ES

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

REV

AutoCAD SHX Text P.S.

AutoCAD SHX Text

ILL.

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DODPOPHM/USA/DOD/AF70/TR14001

AutoCAD SHX Text

SHEET 1 OF 5

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text A

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LTR

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

ASTM D6251

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

DATE

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

AutoCAD SHX Text 16 3/4

AutoCAD SHX Text

AutoCAD SHX Text 1.043

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

D. NAY J. BURLEIGH J. HARMON N. CORONADO

AutoCAD SHX Text F01-167-6621

AutoCAD SHX Text

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

RSC

AutoCAD SHX Text

III

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text

IAW: ASTM D1974 SEALING METHOD C

AutoCAD SHX Text

IAW: ASTM D6251

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 41

AutoCAD SHX Text

CARTRIDGES, POWER DEVICE

AutoCAD SHX Text

UN0276

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text A

AutoCAD SHX Text

ADD DISTRIBUTION STATEMENT, DESTRUCTION NOTICE AND CHANGED BOM

18094

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text A/R A/R 1 A/R

AutoCAD SHX Text

TAPE, PACKAGING WRAP BARRIER BAG CUSHIONING

AutoCAD SHX Text

3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

AutoCAD SHX Text ASTM D5486 TYPE I OR V MIL-PRF-81705 TYPE I, CLASS 1 MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE II, CLASS B

AutoCAD SHX Text -4 -3 -2 -1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 2 OF 5

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

INITIATOR, PROPELLANT ACTUATED

F01-167-6621

NOTICE 1 : FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM-D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 3: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 4: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

NOTES

1. MAY PLACE UP TO 10 BAGGED ITEMS IN SHIPPING CONTAINER USING REF.-1 TO ENSURE THAT ITEMS DO NOT TOUCH

EACH OTHER OR SIDES OF OUTER CONTAINER.

2. WRAP ITEM USING REF.-3, PLACE IN BAG REF.-2 REMOVE AIR AND SEAL.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 3 OF 5

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

INITIATOR, PROPELLANT ACTUATED

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

INITIATOR, PROPELLANT ACTUATED

AutoCAD SHX Text F01-167-6621

AutoCAD SHX Text

ITEM REFERENCE

AutoCAD SHX Text

LOADS OF AMMUNITION.

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 20 1 2 2 2 1

AutoCAD SHX Text EDGE PROTECTORS PLYWOOD STRAPPING, STEEL STRAPPING, STEEL STRAPPING, STEEL PALLET, 4-WAY ENTRY

AutoCAD SHX Text AS MANUFACTURED 48 X 41 5/8 X 3/8 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 3/4 X .015 X AS REQUIRED 40 X 48

AutoCAD SHX Text NSN 8135-00-145-0070 (OR EQUAL) A-A-55057 TYPE A ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 ASTM D3953 TYPE 1, RD, FINISH B, GRADE 2 MIL-DTL-15011 TYPE I, CLASS 1, STYLE 1

AutoCAD SHX Text -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

40 BOXES @ 25 LBS NET PALLET WT PLYWOOD WT STRAPPING WT

AutoCAD SHX Text

AutoCAD SHX Text

1000 LBS LBS 65 LBS LBS 16.95 LBS 1.40 LBSLBS

AutoCAD SHX Text

1083.35 LBS

AutoCAD SHX Text

CUBE OF PALETIZED LOAD = 48.4

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text

PALLETIZATION PROCEDURE FOR LEVEL B PACK

AutoCAD SHX Text

INITIATOR, PROPELLANT ACTUATED

1. PUT BARRIER REF.-5 IN THE BOTTOM OF THE CONTAINER, PLACE BAGGED CHARGE ASSEMBLY IN AND FOLD THE WRAP

OVER THE TOP OF THE ASSEMBLY. TAPE IN PLACE WITH REF.-6.

2. WRAP REF.-8 AROUND THE CHARGE ASSEMBLY CUSHIONING ALL SURFACES. SECURE WRAP WITH TAPE REF.-6.

3. PLACE THE WRAPPED CHARGE ASSEMBLY INTO BAG REF.-7 AND SEAL. REMOVE EXCESS AIR BY PUSHING IT OUT WITH

YOUR HANDS. TAKE CARE NOT TO DAMAGE THE SHAPE OF THE CHARGE ASSEMBLY.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

1. WRAP EACH ITEM IN WRAP, REF.-3.

2. PLACE EACH ITEM INSIDE BAG, REF.-2, REMOVE AIR AND SEAL.

3. PLACE UP TO 10 ITEMS IN SHIPPING CONTAINER, ADD CUSHIONING, REF.-1, AS REQUIRED TO ENSURE A SNUG FIT.

4. CLOSE AND TAPE CONTAINER WITH REF.-4.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

1. WRAP ENDS OF ITEM USING REF.-2 TO PROTECT, THEN WRAP ENTIRE ITEM IN REF.-2. PLACE IN BARRIER BAG REF.-3.

REMOVE AIR AND SEAL.

2. MAY PLACE UP TO 10 EA. ITEMS IN SHIPPING CONTAINER. CUSHION WITH REF.-4 TO ENSURE A SNUG FIT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

1. PLACE DUST COVERS ON ENDS OF ITEM IAW T.O. 11P3-3-117.

2. WRAP ITEM IN REF.-2 AND PLACE IN BAG, REF.-3. EVACUATE AIR AND SEAL.

3. PLACE UP TO 20 (TWENTY) BAGGED ITEMS IN SHIPPING CONTAINER, REF.-1. ADD CUSHIONING, REF.-4 TO ENSURE A

SNUG FIT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 13 JULY 2020. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

DD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-439-8625

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-439-8625

AutoCAD SHX Text

B) PROPER SHIPPING NAME: FUZES, DETONATING

AutoCAD SHX Text

PACKAGING WAS MANUFACTURED.

AutoCAD SHX Text

C) UN POP MARKING:

AutoCAD SHX Text

**THE LAST TWO DIGITS OF THE YEAR DURING WHICH THE

AutoCAD SHX Text

CLOSURE:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

USA/DOD/AF70

AutoCAD SHX Text n

AutoCAD SHX Text 4G/Y6/S/**

AutoCAD SHX Text

UN0367

AutoCAD SHX Text u

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

UNSERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

MULTIPLE PART NUMBERS

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

CORD ASSEMBLY, DETONATING

AutoCAD SHX Text 17292

AutoCAD SHX Text

DATE

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

1377-01-439-8625 ES

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

REV

AutoCAD SHX Text P.S.

AutoCAD SHX Text

ILL.

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

DODPOPHM/USA/DOD/AF70/TR17016

AutoCAD SHX Text

SHEET 1 OF 4

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text A

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

VARIES

AutoCAD SHX Text 45 1/8

AutoCAD SHX Text

SEE NOTICE 1

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

VARIES

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

ASTM D6251

AutoCAD SHX Text

ASTM D5118

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text

PACKING

AutoCAD SHX Text 17 1/8

AutoCAD SHX Text

AutoCAD SHX Text 10 3/8

AutoCAD SHX Text

AutoCAD SHX Text 4.640

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

K. KNIGHTON W. MONSON J. BURLEIGH N. CORONADO

AutoCAD SHX Text F01-439-8625

AutoCAD SHX Text

D) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

FTC

AutoCAD SHX Text

III

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text V3c

AutoCAD SHX Text

IAW: ASTM D1974 SEALING METHOD C AND REINFORCEMENT METHOD 2B

AutoCAD SHX Text

IAW: ASTM D6251

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

SERVICEABLE METHOD: 41

AutoCAD SHX Text

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

DATE

AutoCAD SHX Text A

AutoCAD SHX Text

ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE

AutoCAD SHX Text 20198

MARCH 87

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SHEET 2 OF 4

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 3 A/R A/R 1 A/R

AutoCAD SHX Text

TAPE, FILIMENT TAPE, PACKAGING WRAP BAG, BARRIER CUSHIONING

AutoCAD SHX Text

3/4 X AS REQUIRED 3 X AS REQUIRED AS REQUIRED AS REQUIRED AS REQUIRED

AutoCAD SHX Text ASTM D5330 TYPE IV ASTM D5486 TYPE I OR V A-A-59135 CLASS 1, GRADE B MIL-DTL-117 TYPE I, CLASS F, STYLE 1 A-A-1898 GRADE I

AutoCAD SHX Text -5 -4 -3 -2 -1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F01-439-8625

CORD ASSEMBLY, DETONATING

1. MAY PLACE UP TO 5 EACH, INDIVIDUALLY BAGGED, ITEMS IN SHIPPING CONTAINER.

2. WRAP ENDS OF ITEM USING REF.-3, PLACE IN BAG REF.-2, REMOVE AIR AND SEAL. CUSHION ITEM USING REF.-1. MORE

THAN ONE ITEM IN SHIPPING CONTAINER REQUIRES CUSHIONING BETWEEN EACH ITEM. SEAL USING REF.-4 AND

REINFORCE USING REF.-5.

MUNITION NOTICES

NOTICE 1: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A. MARK THE OUTSIDE OF THE OVERBOX "OVERPACK." THE

SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER

PAD OF ASTM D4727, CF, DOM, GR 275 (OR EQUAL) TO ENSURE A TIGHT FIT IN THE OVERBOX.

NOTICE 2: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

NOTICE 3: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL

HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VALID INTERIM HAZARD CLASSIFICATION LETTER ALONG

WITH DOT SP 15448 MUST ACCOMPANY EACH SHIPMENT.

NOTICE 4: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING

IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 5: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 6: PALLETIZATION AND UNIT LOADS SHALL BE IAW MIL-STD-1660 FOR AMMUNITION AND EXPLOSIVES.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

AutoCAD SHX Text

DD

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 4

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-439-8625

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 4

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-439-8625

AutoCAD SHX Text

CORD ASSEMBLY, DETONATING

AutoCAD SHX Text

ITEM REFERENCE

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

1. MAY PLACE UP TO 5 EACH, INDIVIDUALLY BAGGED, ITEMS IN SHIPPING CONTAINER.

2. WRAP ENDS OF ITEM USING REF.-1, PLACE IN BAG REF.-2, REMOVE AIR AND SEAL. CUSHION ITEM USING REF.-3. MORE

THAN ONE ITEM IN SHIPPING CONTAINER REQUIRES CUSHIONING BETWEEN EACH ITEM. SEAL USING REF.-4 AND

REINFORCE USING REF.-5.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .