F01-255-2382.pdf

CODE !D SPI NO <Tpm =

SPECIAL PACKAGING INSTRUCTION =FOI-255-2382 =

98747 ~= SHEll I OF 7 ~==

PART DR DRA\lING NO. NATIONAL STOCK NO CURRENT ILL. D. NAY

REV ~~

SEE TABLE 1 SEE TABLE I R CHK. N. JAMES ~==ITEM NOMENCLATURE ORIGINAL ENGR. R. McCLOY =~DATE ~

CARTRIDGE, A[RCRAFT ~

94048 AUTH. K.'w'. OLSON ~=~

M!LlTARY PRESERVA I ION !A\I MIL -STD-2073 PACKING AS SPECIFIED BELOV AND BILL OF MATERIALS ~=~ METHOD OF PR[SERVATtON: 41 LEVEL SPEC STYLE TYPE CL VRTY GR TR ~=

A SEE NOTICE 2 ~

OUP 001 '='ICO ODD B ASTM-D5!l8 RSC V3c

CLEANING & DRYING IAV MIL -STD-2Q73 LEVEL A LEVEL B

PRESERVATIVE: NfA GROSS CU FT SEE NOTICE 2 ].043

GROSS VT LBS SEE NOTICE 2 12,0

MARKING lAId MIL -STD-I29 DESIGN FRAGILITY G 60

SPECIAL MARKINGS:

A) SPI NO, FOl-255-2382 LENGTH \JIDTH DEPTH

MARK THE S?! NUMll£R ON THE IIl(NTIrlCATIDN SIDE []r ([]NTMNER, CNTR LD B) PROPER SHIPPING NAME: CARTRIDGES, PDIJER DEVICE LEVEL A: SEE NOTlCE 2

UN 0323 LEVEL Eo 10 10 16 C} UN POP MARKING: ® 4G/YG/S/u n USA/DDD/Ar70 CNTR 0.0 •• TIit: LAST T\ro DIGITS Dr THE: Y(AR DUI([NG •.••.HICH H-[ LEVEL A: SEE NonCE 2

PACJ(AGlNli..••.AS ~.NIJfACTlRED. LEVEL B: 10 3/8 10 3/8 16 3/4

D> REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY. ITEM DIM SEE TABLE 1

ITEM VT. SEE TABLE 1

NOTE: THE ABOVE POP MARKINGS I

ARE FOR DOD USE ONLY. REVISIONS

CLOSURE'

LlRI DESCRIPTION DATE

R UPDATED ADDED NSN 09140

LEVEL A: SEE NOTICE 2

LEVEL B'IAI,./: ASTo'-l-D1974

SEE MUN!T!ON NOTICES PAGE 2

SEE NOTES PAGE 2

-4 A/R TAPE 3 X AS REQUIRED IASIM D:J486 TYPE I DR V =-3 A/R CUSHIONING AS RJ:"QUiRJ:"D A A 1898 GRADE Ii DR EQUAL P -2 36 BARRILR BAGS 6 X 4 (ill) MIL-OTL TYPE L CLASS J:", SrYLE 1 ~

-1 A/R "WRAP AS REQU[RED PPP-C-!797 TYPE II OR EQUAL ,

SIZE' ~~

OIY NDMENCLA TURE (INCHES UNLESS SPECJrIED) MATERIAL

PIN REQD DESCRIPTION TOLERANCES ON FRAC. ± ~, SPECIFICATION ~=DECIMAL ± .01, ANGLES ± I' eu

DO ,=" 2169 MOD COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION

ITEM NOMENCLATURE

CARTRIDGE. AIRCRAFT

MUNmON NOTICES

CODE ID

98747

Sf'I NO CTPOl ,01-255-2382

SHEET 2 OF 7

NonCE 1: CLASS 1 (EXPLOSIVE) MATERIAL OWNED BY THE DEPARTMENT OF DEFENSE (000) PACKAGED PRIOR TO JANUARY 1, 1990 IN ACCORDANCE WITH THE PACKAGING REQUIREMENTS IN EFFECT AT THAT TIME ARE EXCEPTED FROM THE REQUIREMENTS OF PERFORMANCE ORIENTED PACKAGING (POP) PROVIDED THE PACKAGINGS HAVE MAINTAINED THEIR INTEGRITY AND THE GOODS ARE DECLARED AS GOVERNMENT OWNED GOODS PACKAGED PRIOR TO JANUARY 1, 1990. THIS CLAUSE DOES NOT APPLY TO COMMERCIAL AIR SHIPMENTS. (REF DLAD 4145.41/AFJI 24-210.)

NOTICE 2: FOR LEVEL A PACKING REQUIREMENTS: THE LEVEL B PACKS SHALL BE OVERSOXED IN A CONTAINER AS LISTED IN MIL·STD-2073 MARK THE OUTSIDE OF THE DVERBOX "INSIDE (INNER) PACKAGES COMPLY WITH 4G(Y6jSj**," THE SIZE AND WEIGHT OF THE OVERBOX WILL VARY DEPENDING ON THE NUMBER OF ITEMS BEING SHIPPED. USE FILLER PAD OF

ASTM-D4727, CF, DOM, GR 275 (OR EQUAL) TO ASSURE A TIGHT FIT IN THE OVER BOX.

NonCE 3: VARIATIONS TO THE PACKAGING REQUIREMENTS OF THE SPI ARE AUTHORIZED IN ACCORDANCE WITH TITLE 49

CFR 178.601(G)(4), VARIATION 4.

NOTICE 4: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDmONS OF THIS SPI DO NOT REQUIRE REPACKAGING IF

THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 5: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 6: THIS SPI IS NOT AUTHORIZED FOR USE WITHOUT PROPER HAZARD CLASSIFICATION. UNLESS A FINAL HAZARD CLASSIFICATION HAS BEEN ISSUED, A COPY OF THE VAllO INTERIM HAZARD CLASSIFICATION LETTER MUST ACCOMPANY

EACH SHIPMENT.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM No. 1S) REQUIREMENTS

THE FOLLOWING STATEMENT IS IN COMPLlANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRIcnONS ON SOLlD WOOD PACKING MATERIAL (SWPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPEOES SUCH AS THE PINEWOOD NEMATODE. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (OIRECf, OR THROUGH AIR

LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF SOLlD WOOD PACKING MATERIAL (SWPM) SHALL BE CONSTRUCTED FROM HEAT-TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM) No. 15." THIS DOCUMENT CAN BE FOUND AT www.ippc.int.

NOTES

1. CUSHION SQUIB WITH REF.-l AND PLACE IN BARRIER BAG, REF.-2.

2. PLACE EACH BAGGED, REF_-2, IN SHIPPING CONTAINER. USE CUSHIONING, REF.-3, AS REQUIRED TO INSURE A SNUG FIT. CLOSE CONTAINER AND SEAL WITH TAPE, REF,-4. MAY PACK UP TO 36 BAGGED ITEMS IN A SHIPPING CONTAINER.

3. SEE TABLE 1 FOR ALL APPLlCABLE NSNS.

4. BAG SIZES WILL VARY DEPENDING ON ITEM SIZE.

DD 2169C MOD COMPUTER GENERATED

http://www.ippc.int.

SPECIAL PACKAGING INSTRUCTION CODE ID SP! NO CTpm 98747 r01-255-2382

ITEM NOMENCLATURE SHEET 3 OF 7CARTRIDGE. A1RCRAFT

TABLE 1

NOTE, THE FOLLOWING N$N's SHALL NOT BE MIXED-PACED [N THE SAME SHIPPING

CONTAINER.

NSN DIMENSIONS NET I,/T. NEV PIN FX "IT"'7-o.-?,,-,,"? c., . 1/? X :v~filA 0.1 .0009 30903860 I 1989010214

1377-01-255-1598 ES 1 1/2 X 3/4 DIA 0.1 .0009 30903861 I 1989010215

1'l77_nT_?":l7_?":l4'l " 1 3/4 X I nTA 0.2 .0072 Q77597 I '0°8 1377-01-336-6648 ES 1 3/4 X I ilIA 0.2 .0012 2-102060-1 1988080386A 1377-n]-I!=lS-2622 ES 2 1/2 X 3/4 D!A 0.1 .0030 lS12ASI05 1988100342

1377-00-042-9551 ES 2 1/2 X I DIA 0.2 .0009 893613 1988050650

1377-01-333-3503 ES 2 1/4 X 1 DIA 01 .0009 876561 2 '995040028

1377-00-140-2651 ES 2 1/4 X 1 DlA 0.1 .0015 876561 1 1988090688 1377-00-174-5024 ES 2 1/2 X 1 DIA 0.2 .0009 895409 t 1988090738 1377-00-172-0428 ES 2 1/2 X 1 DrA 02 .0009 895408 1 1988090737

1377-00-756-1384 ES I 3/8 X 1 DIA 0,2 .0009 1377 MI82 1988050847

1377-00-087-7103 ES 2112X1DIA 02 .0009 1377-M232 1988090395

1377-01-263-3627 ES 2 1/2 X 3/4 DIA 01 .0009 897899-1 1988090737A

1377-00-188-4086 ES 2 5/8 X 1/::' DIA 02 .0007 30900400 1988090792

1377-01-043-8275 ES 2 1/2 X 1 DlA 01 .0009 874000 1988080279

1377-01-391-5415 ES 2,2 X 8 D\A 02 .0012 446161 1995060140

1377-01-234-0912 ES 2 1/2 X 1 DiA 02 ,0012 878493-1 1999060091

1377-01-469-2437 ES 1 3/4 X 1 D!A 02 ,0015 876296-3 IHe

1377-01-505-5215 ES 2 1/2 X 3/4 DIA, 01 ,0009 873571-02 lHC

1377-01-073-3831 ES 1 1/2 X :J/8 DIA, 02 .0002 4227h182 I 1987100761

1377-01-377-9215 ES 1 1/2 X ;:>/8 DIA. 02 .0003 834AS450 I 1993080451

1377-01-560-8285 ES 2 1;;' X 1 DIA, 0.2 .0015 200790 I IHC

DD ~. 2169C MOD COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION

CARTRIDGE, I'dRCRAFT

-3

DD .:J!:" 2169C MCD

CODE ID

98747

SPI NO. apm FOl-255-2382

SHEET 4 OF 7

ITEM REFERENCE

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION CODE !D

98747

SPI NO. CTPDl

FOJ-255-2382

ITEM NOMENCLATURE

CARTRIDGE, AIRCRAFT

ATIACHMENT

SHEET 5 OF 7

TYPICAL OUTER PACKAGE MARKINGS

(MIL-STD-129, REF. 5.6.1-5.6.2f)

SHOULD BE LOCATED ON FRONT OF

CONTAINER, SEPARATED FROM OTHER

MARKINGS. IF SPACE 15 NOT

AVAILABLE, CAN BE ON BACK OR TOP

OF CONTAINER.

OPPOSITE OF IDENTIFICATION MARKINGS.----------------r'®-u POP MARKINGS fRm1\ I n CONTRACTOR TEST I \ DR DoD TEST /. , 20 BAR CODING

IS REQUIRED lAW:

(MIL-STD-1295.6.5)

(OPTIONAL)

OPTIONAL ON TOP

I i

(IF APPLICABLE)

MARK BOTH ENDS

WITH DOOle AND

LOT#.

MARKED ON BOTTOM END.

ONE LOCATION IS REQUIRED.

DD ""~"" 2I69C flDD COMPUTER GENERATED

I

SPECIAL PACKAGING [NSTRUCTIO N

ITEM NOMENCLATURE

CARTRIDGE, AIRCRAFT

PALLETIZATION PROCEDUREFOR LEVEL B PACK

2 IN.

OVERHANG

2 PLCS

-1

CODE ID

98747

SPI NO. <TPOJ

FOI-255-2382

SHEET 6 OF 7

40 BOXES @ 12 LBS ~ 480 LBS

NET PALLET WT ~ 65 LBS

PLYWOOOWT ~ 16.95 LBS

STRAPPING WT ~ 1.40 L8S

563.35 l8S

CUBE OF PAllEmED LOAD ~ 48.4

-6 I 8 EDGE PROTECTORS NSN 8135-00-145-0070 OR EQUAL

-5 1 PLYWOOD 52 X 41 5 8 X 3 8 A-A-55057 TYPE A

-4 2 STRAPPING STEEL & SEALS 190X58X023 ASTM-0-3953 TYPE 1 REG DUTY. FIN B GRAOE 2 -3 2 STRAPPING STEEL & SEALS 173X58X.023 ASTM-D-3953 TYPE 1 REG DUTY. FIN B GRADE 2 -2 2 STRAPPING STEEL & SEALS 206 X S 8 X .023 ASTM-D-]9S3 TYPE 1 REG DUTY. FIN B GRADE 2

-1 1 PALLET 4-WAY ENTRY 40 X 48 MIL-P-15011 STYLE 1 SIZE A TYPE I CLASS 1

SIZE'

oTY NOMENCLATURE (jNCHES UNLESS SPECIFIED) MATERIAL

PIN REaD DESCRIPTION TOLERANCES ON FRAC ± .\8, SPECIFICATION

DECIMAL ± .01. ANGLES ± J'

DD ~" 2169 MOD COMPUTER GENERATED

SPEC1AL PACKAG1NG INSTRUCTIO N

CARTRIDGE, AIRCRAFT

ATTACHMENT

CODE lD 98747

SPI NO CTPOJ

FOL-255-2382

SHEET 7 OF 7

TYPICAL OUTER PACKAGE MARKINGS

(MIL-STD-129, REF. 5.6.4.1)

BY LOT IF MORE THAN

1 LOT, OR TOTAL QIY

OF THE LOT.

IF BOX CAN BE TURNED, IF

NOT PLACE ON OPPOSITE

SIDE OF PALLET.

PALLETS (MIL-P-15011):

- MUST BE 4-WAY ENTRY.

- HEAT TREATED HARDWOOD OR METAL.

- 40" X 48" UNLESS OTHERWISE REQUIRED (SPI) OR

REQUESTEp/APPROVED (REQUEST FOR DEVIATION).

BANDING (ASTM-D3953):

- GALVANIZED BANDING.

- SIZE DEPENDS ON PACKAGE/PALLET WEIGHT.

DD ~'::'"2169C MOD COMPUTER GENERATED