FA8213-26-R-3006.pdf

PDF 1 MB Posted

Attached to
B-1 Handles - FA821326R3006
Solicitation number
FA821326R3006
Issued by

About this file

Contract Summary: FA8213-26-R-3006

This is a Solicitation and Contract (Standard Form 1447) issued by the Department of the Air Force, Directorate of Contracting (AFLCMC EBHK) at Hill Air Force Base, Utah for the procurement of explosives manufacturing supplies. The contract is designated as a Rated Order under the Defense Priorities and Allocations System (DPAS) with a DO: A6 rating. The solicitation is a negotiated Request for Proposal (RFP) with an offer deadline of 6 July 2026 at 2:00 PM. The acquisition is for a sole-source award to Rockwell Collins Inc. (cage code 17610) and is unrestricted with a NAICS code of 325920 (Explosives Manufacturing).

The primary line items include two types of initiator assemblies for B-1B aircraft: Handle, Escape, Type III (NSN 1377-01-207-7090 ES, 27 units across two sub-line items with 18-month and 30-month delivery windows) and Handle, Escape, Type II (NSN 1377-01-207-7091 ES, 36 units across two sub-line items with matching delivery schedules). Both items are designated as critical safety items, classified as hazardous materials (Class Division 1.4B explosives), and require ISO 9001-2015 compliance, origin inspection and acceptance, and higher-level contract quality requirements. The contract includes a data deliverable (CDRLs) with items covering ammunition data cards, engineering change proposals, notices of revision, requests for variance, acceptance test plans and reports, failure analysis, obsolescence alerts, and DMSMS health assessments. Delivery is to 72 ABW LGRSMK at Tinker Air Force Base, Oklahoma, F.O.B. Origin. All items require serial number marking per MIL-STD-130 and compliance with extensive hazardous material identification, packaging, marking, and safety precautions per military standards. The contract incorporates numerous FAR and DFARS clauses addressing small business subcontracting, cybersecurity, export controls, payment procedures (via WAWF), and representations regarding responsibility, cost accounting practices, and various compliance certifications. Payment withholding is required until specified CDRLs are delivered and approved. The contractor must hold prices firm for 120 days, and expedited delivery at no additional cost is authorized.

View the file

Other files

File Type Posted
JHCS_1377012077091.pdf PDF
Item Description 1377012077090.pdf PDF
AIR SPEC.pdf PDF
Item Description 1377012077091.pdf PDF
SPI_F012077089.pdf PDF
ES7034.docx DOCX document
REPSHIP.pdf PDF
JFQR B-1 B Type III Hatch Jettison Handle.pdf PDF
JFQR B-1 B Type II Hatch Jettison Handle.pdf PDF
Packaging SOW.pdf PDF
ADC SOW Jan 2018.docx DOCX document
CDRLs.pdf PDF
CADPAD Item Marking Instruction Ver 1.6.pdf PDF
JHCS_1377012077090.pdf PDF
EDL_1377012077090.pdf PDF
EDL_1377012077091.pdf PDF
Show all 16

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

N

9. (Agency Use)

10. ITEMS TO BE PURCHASED (Brief Description)

SUPPLIES SERVICES

11. IF OFFER IS ACCEPTED BY THE GOVERNMENT WITHIN

CALENDAR DAYS (60 CALENDAR DAYS UNLESS OFFEROR INSERTS A

DIFFERENT PERIOD) FROM THE DATE SET FORTH IN BLOCK 9 ABOVE, THE

CONTRACTOR AGREES TO HOLD ITS OFFERED PRICES FIRM FOR THE

ITEMS SOLICITED HEREIN AND TO ACCEPT ANY RESULTING CONTRACT

SUBJECT TO THE TERMS AND CONDITIONS STATED HEREIN.

12. ADMINISTERED BY CODE

13. CONTRACTOR

OFFEROR

CODE FACILITY

CODE

14. PAYMENT WILL BE MADE BY CODE

TELEPHONE NUMBER

UNIQUE ENTITY

IDENTIFIER

CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK:

15. PROMPT PAYMENT DISCOUNT

16. AUTHORITY FOR USING OTHER

THAN FULL AND OPEN COMPETITION

10 U.S.C. 3204(a) 41 U.S.C. 253

UNDER THE UNITED STATES CODE AT: ( ) ( )

17.

ITEM NUMBER

18.

SCHEDULE OF

SUPPLIES/SERVICES

19.

QUANTITY

20.

UNIT

21.

UNIT PRICE

22.

AMOUNT

23. ACCOUNTING AND APPROPRIATION DATA 24. TOTAL AWARD AMOUNT

(For Government Use Only)

25. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR

OTHERWISE IDENTIFIED ABOVE AND ON ANY CONTINUATION SHEETS SUBJECT TO THE TERMS AND

CONDITIONS SPECIFIED HEREIN.

26. AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION

NUMBER SHOWN IN BLOCK 4 INCLUDING ANY ADDITIONS OR CHANGES

WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

27. SIGNATURE OF OFFEROR/CONTRACTOR 28. UNITED STATES OF AMERICA (Signature of Contracting Officer)

NAME AND TITLE OF SIGNER (Type or Print) DATE SIGNED NAME OF CONTRACTING OFFICER

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION NOT USABLE

STANDARD FORM 1447 (REV. 12/2022)

DO: A6

X

FA8213-26-R-3006

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF

CONTRACTING

AFLCMC EBHK

6072 FIR AVENUE BLDG 1233

HILL AIR FORCE BASE UT 84056-5820

BUYER: Shasta L Selwood/EBHKA shasta.selwood@us.af.mil Phone: (801) 777- 4162 Fax: (801) 777-5777

FA8213

CLASSIFICATION

325920

SOLICITATION/CONTRACT

BIDDER/OFFEROR TO COMPLETE

BLOCKS 11, 13, 15, 21, 22, and 27

1. This Contract is a Rated Order under the Defense Priorities and Allocations System (DPAS) - Code of Federal Regulations - at

15 CFR 700.

RATING PAGE OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE

DATE

4. SOLICITATION NUMBER 5. SOLICITATION TYPE

SEALED BIDS

(IFB) INVITATION

FOR BID

NEGOTIATED

(RFP) REQUEST

FOR PROPOSAL

6. SOLICITATION

ISSUE DATE

7. ISSUED BY CODE 8. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR:

NO COLLECT CALLS

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS (WOSB)

HISTORICALLY ELIGIBLE UNDER THE WOSB PROGRAM

UNDERUTILIZED ECONOMICALLY DISADVANTAGED

BUSINESS ZONE WOMEN-OWNED SMALL BUSINESS (EDWOSB)

(HUBZone) SMALL BUSINESS NORTH AMERICAN INDUSTRY CLASSIFICATIO

SERVICE-DISABLED VETERAN- SYSTEM (NAICS):

OWNED SMALL BUSINESS

8(A) SIZE STANDARD:

Solicitation: Offers will be received at the Issuing office until * on * . Late offers are subject to late proposal provisions incorporated herein. All offers are subject to such provisions, representations certifications and specifications as are attached or incorporated by reference.*

6-JUL-2026 2:00PM

Explosives Manufacturing X

SCD:B

(SEE ESP CLAUSE 252.232-7003.)

EFT:T

X

ROUTINE.

Subject to the terms and conditions stated herein, the Contractor agrees to hold its offered prices firm for 120 days.

EXPEDITED DELIVERY AT NO ADDITIONAL COST TO THE GOVERNMENT IS AUTHORIZED.

Sole source to: Rockwell Collins Inc.; cage code 17610

SEE LINE ITEM SCHEDULE

Total

SEE SCHEDULE

X

DATE SIGNED

Prescribed by GSA - FAR (48 CFR) 53.214(d) 53.214(d

NO RESPONSE FOR REASONS CHECKED

CANNOT COMPLY WITH SPECIFICATIONS CANNOT MEET DELIVERY REQUIREMENT

UNABLE TO IDENTIFY THE ITEM(S) DO NOT REGULARLY MANUFACTURE OR SELL THE TYPE OF ITEMS

INVOLVED

OTHER (Specify)

WE DO

WE DO NOT, DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF ITEMS INVOLVED

NAME AND ADDRESS OF FIRM (Include ZIP Code) SIGNATURE

TYPE OR PRINT NAME AND TITLE OF SIGNER

FROM: AFFIX

STAMP

HERE

TO:

SOLICITATION NUMBER

DATE AND LOCAL TIME

ATTN: Shasta L Selwood/EBHKA

DEPARTMENT OF THE AIR FORCE, DIRECTORATE OF CONTRACTING

AFLCMC EBHK

6072 FIR AVENUE BLDG 1233

HILL AIR FORCE BASE UT 84056-5820

FA821326R3006

6 JUL 2026 2:00 PM

STANDARD FORM 1447 (REV. 12/2022) BACK

FA8213-26-R-3006

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

DCMA and DFAS are required to withhold payment IAW DFAR 252.227-7030 until CDRL A001, A004 & A005 have been delivered and/or approved by Hill AFB.

Handle, Escape, Type III

Item No.

NSN: 1377-01-207-7090 ES

Handle, Escape, Type III Initiator, Propellant Actuated, Length 3.725 inches nominal. Initiation Handle, B-1B Type III, detonation initiation method manual.

DODIC: UY02

Manufacturer Part Number 17610 2674300-301-02 Associated Document(s) Line Item(s)

FD20202550044 0002

Priority: R ROUTINE.

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2015 2008

Applicability: None ;

Buy American Act/Balance of Payments Program IUID Required: No Physical Item Markings:

Serial Number Required

Item No.

0001AA

Firm Fixed Price

Quantity U/I Unit Price Amount

27 EA

CLIN ACRN ACRN Total

0001AA AA

SAME

Same as basic item above Associated Document(s) Line Item(s)

FD20202550044 0002

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B FV2037 ORIGIN

Type / Ship To PACRN Mark For

B FV2037 B-1 PDM

Type / Ship To Quantity (U/I) *ARO Contract _ Req No / Pri

Required Delivery

B FV2037 27 EA *18 Months Non-MilStrip

Proposed Delivery

B FV2037 27 EA

TAC: FQHR

Item No.

0001AB

Firm Fixed Price Quantity U/I Unit Price Amount

27 EA

CLIN ACRN ACRN Total

0001AB AB

SAME

Same as basic item above Associated Document(s) Line Item(s)

FD20202550044 0005

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B FV2037 ORIGIN

Type / Ship To PACRN Mark For

B FV2037 B-1 PDM

Type / Ship To Quantity (U/I) *ARO Contract _ Req No / Pri

Required Delivery

B FV2037 27 EA *30 Months Non-MilStrip

Proposed Delivery

B FV2037 27 EA

TAC: FQHR

Handle, Escape, Type II

Item No.

NSN: 1377-01-207-7091 ES

Handle, Escape, Type II Initiator, Propellant Actuated, Length 3.725 inches nominal. Initiation Handle, B-1B Type II, detonation initiation method manual.

DODIC: UY03

Manufacturer Part Number 17610 2674200-201-02 Associated Document(s) Line Item(s)

FD20202550044 0003

Priority: R ROUTINE.

Limitations of Liability: Other Than High Value Item

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required Quality Assurance: Higher Level Contract Quality Requirements The Contractor shall comply with the standard(s) listed below. (if more than one, check the appropriate standard.)

Title Number Date Tailoring

ISO 9001-2015 2008

Applicability: None ;

Buy American Act/Balance of Payments Program IUID Required: No Physical Item Markings:

IAW MIL-STD-130

Serial Number Required

Item No.

0002AA

Firm Fixed Price Quantity U/I Unit Price Amount

36 EA

CLIN ACRN ACRN Total

0002AA AA

NSN: SAME

Same as basic item above Associated Document(s) Line Item(s)

FD20202550044 0003

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B FV2037 ORIGIN

Type / Ship To PACRN Mark For

B FV2037 B-1 PDM

Type / Ship To Quantity (U/I) *ARO Contract _ Req No / Pri

Required Delivery

B FV2037 36 EA *18 Months Non-MilStrip

Proposed Delivery

B FV2037 36 EA

TAC: FQHR

Item No.

0002AB

Firm Fixed Price Quantity U/I Unit Price Amount

36 EA

CLIN ACRN ACRN Total

0002AB AB

SAME

Same as basic item above Associated Document(s) Line Item(s)

FD20202550044 0006

Transportation From Continental United States CONUS (CONUS) Sources

TYPE / SHIP TO CODE F.O.B.

B FV2037 ORIGIN

Type / Ship To PACRN Mark For

B FV2037 B-1 PDM

Type / Ship To Quantity (U/I) *ARO Contract _ Req No / Pri

Required

B FV2037 36 EA *30 Months Non-MilStrip

Proposed Delivery

B FV2037 36 EA

TAC: FQHR

DATA

Item No.

Not Separately Priced Quantity U/I Unit Price

1 LO NSP

DATA

DATA

DATA IAW DD1423-1 ATTACHED EXHIBIT A

DATA IAW DD1423-1 EXHIBIT A ATTACHED

A001-Ammunitiion Data Card (ADC) A002-Engineering Change Proposal (ECP) A003-Notice of Revision (NOR) A004-Request for Variance (RFV) A005-Acceptance Test Plan A006-Acceptance Test/Inspection Report A007-Failure Summary & Analysis Report A008-Obsolescence Alert Notice A009-Diminishing Manufacturing Sources and Material Shortages (DMSMS) Health Assessment Report

Priority: R ROUTINE.

Type / Ship To Quantity (U/I) *ARO IAW 1423 _ Req No / Pri

Required Delivery

+ IAW1423 1 LO *1 Calendar Days

Proposed

+ IAW1423 1 LO

SHIP TO / PLACE OF PERFORMANCE

TYPE/CODE: + IAW1423

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

TYPE/CODE: B FV2037

72 ABW LGRSMK

7150 PATROL ROAD

TINKER AIR FORCE BASE OK 73145-5000

UNITED STATES

MARK FOR: (See Individual Line Item) REQUISITION NUMBER: (See Individual Line Item) REQUISITION PRIORITY: (See Individual Line Item)

AWARD NUMBER:

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

MIL-STD-130: Items shall be marked in accordance with MIL-STD-130. The National Stock Number (NSN), and when assigned, the Configuration Item Identifier (CII), serial number, and military type designation information shall be marked on major assemblies, units, groups, and sets. Special attention must be given to requirements governing the application of the actual manufacturer's Federal Supply Code for Manufacturers (FSCM) to the physical item. Items which are excluded in accordance with paragraph 1.1 of MIL-STD-130, Revision M, shall be marked in accordance with the appropriate document.

2. PACKAGE AND CONTAINER MARKING: Shipments will not be made until the NSN has been assigned, unless specifically authorized by the Contracting Officer.

MIL-STD-129/ASTM-D-3951:

a. Interior packages and shipping containers shall be marked in accordance with MIL-STD-129 when Military packing is specified and ASTM-D-3951 when commercial packaging is specified. The requirements of paragraph 2.h apply regardless of which packaging is utilized.

(1) Design manufacturer's name, trademark or manufacturer's code (from Cataloging Handbook H4-1 or H4- 2), identifying number, and serial number, when applicable, shall be included in the identification marking.

(2) When applicable, the Air Force project designator code shall be included as the last line of the address marking and the project name related to the project code shall be marked in the clear on the exterior shipping container.

b. Tags and labels, when required, shall be contractor's tags or labels conforming to the requirements of MIL-STD-129 or as approved by the procuring activity. Contractor's forms which indicate serviceable condition shall not be any shade of green or red. Labels are authorized to be used on metal containers. Items requiring technical order (T.O.)

certification shall be annotated on inner and outer container tags or label with T.O. compliance.

c. When dummy containers are used in a unitized load, the dummy containers shall be clearly marked "DUMMY CONTAINER" and located in the load so that the marking will be plainly visible to receiving and storage personnel.

d. All interior packages and shipping containers for articles and materials classified as hazardous or restricted under provisions of Title 49, Code of Federal Regulations, or AFR 71-4/DLAM 4145.3/TM 38-250/NAVSUP PUB 505/MCO P

4030.19 shall be marked, regardless of exemption for mode of transportation, with proper shipping name of item;

flash point of all liquids having a flash point of 200 degrees F. or below; and percentage concentration of acids and corrosive liquids. In addition, the quantity of each hazardous or restricted material included in a container shall be annotated adjacent to the shipping name of the item, e.g., Acetic Acid (80% concentration) -- 1 qt.

e. On shipments of firearms regardless of mode of transportation, selected elements of identification and contractor data markings shall be omitted or obliterated in accordance with the requirements of MIL-STD-129 regarding sensitive items and packing lists shall be placed only inside the containers.

f. Special markings for packages and containers when specified on AFMC Form 158 shall be complied with as a part of

MIL-STD-129.

g. All special coated terneplate containers shall be marked with the legend "CAUTION--DO NOT REUSE AS FOOD

CONTAINERS."

h. Bar code markings in accordance with MIL-STD-129 shall apply to all units, intermediate and exterior containers for all items going into stock regardless of package size or levels of package specified (including commercial packaging). In addition to the NSN/NATO stock number, the exterior shipping container shall include the 13 digit contract number (plus, if applicable, the four digit call number). Excluded from Bar Code Marking are:

(1) Foreign Military Sales.

(2) Direct Vendor Delivery (DVD)/Government Furnished Equipment (GFE) shipments.

(3) Multipack Exterior Shipping Containers. (Unit and intermediate containers do require a bar coded NSN/NATO stock number. However, the next container (unit or intermediate) inside the multipack will also require a bar coded NSN/NATO stock number and contract number with call number, if applicable, in the lower right hand corner).

(4) All unpacked or uncrated items; e.g., vehicles, tires, etc.

i. Shipments of wheeled items weighing 2,000 pounds or more and scheduled for transportation by military aircraft will be marked with the individual axle weights in accordance with MIL-STD-129.

3. WARRANTED ITEMS: When the contract contains warranty requirements, warranty information shall be applied on containers and items as follows:

a. Container markings shall be as specified in MIL-STD-129. The period or conditions of the warranty shall be specifically stated, i.e., landings, flight hours, operating hours, days from shipping date, etc.

b. Items shall be marked in accordance with requirements of MIL-STD-130. Markings shall be located in a manner so as to be conspicuous to the person removing the item from service. When no deleterious effect or functional degradation is caused, the markings shall be black letters on yellow FED-STD-595 color 13655) background. The marking shall include the same period or condition required on the containers.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

(IAW FAR 46.302)

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(IAW FAR 46.311, DFARS 246.202-4(1))

(a) The Contractor shall comply with the higher-level quality standard(s) listed below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]*

Title Number Date Tailoring *See Individual Line Item Schedule

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984)

(IAW FAR 46.316)

INSPECTION AND ACCEPTANCE (SEP 1999)

(IAW FAR 46.401(b), FAR 46.503)

Government Contract Quality Assurance Inspection and Acceptance will be at (Final):

[CONTRACTOR FILL-IN]

Item No(s): See schedule for items with the following code(s) listed below :

Inspection Code and Address:

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-15 STOP-WORK ORDER (AUG 1989)

(IAW FAR 42.1305(b)(1))

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984)

(IAW FAR 42.1305(c))

52.247-29 F.O.B. ORIGIN (FEB 2006)

(IAW FAR 47.303-1(c))

52.247-30 F.O.B. ORIGIN, CONTRACTOR'S FACILITY (FEB 2006)

(IAW FAR 47.303-2(c))

52.247-34 F.O.B. DESTINATION (NOV 1991)

(IAW FAR 47.303-6(c))

F.O.B. ORIGIN (OCT 1993)

(IAW FAR 47.305(b))

Any supply item applicable to this document shall be delivered F.O.B. at:

F.O.B. Address

[CONTRACTOR FILL-IN]

HAZARDOUS CLASSIFICATION (MAY 1998)

(IAW FAR 47.305-9(c))

For the purpose of identifying commodity description and freight classification of explosives and other dangerous supplies, the following applies.

Hazardous Classification Line Item 0001

Hazardous Class Division 1.4 Storage Compatibility Group B

DOT Marking FUZES, DETONATING DOT Class 1.4B DOT Label Explosive 1.4B

UN Serial No 0257 UN Proper Ship Name FUZES, DETONATING

Freight Classification Line Item 0002

Hazardous Class Division 1.4 Storage Compatibility Group B

DOT Marking FUZES, DETONATING DOT Class 1.4B DOT Label 1.4B

UN Serial No 0257 UN Proper Ship Name FUZES, DETONATING

Freight Classification

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(IAW DFARS 232.7004(b), PGI 232.7004(b)(1), DFARS 212.301(f)(liii))

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC Inspect By DoDAAC Ship To Code Ship From Code Mark For Code Service Approver (DoDAAC) Service Acceptor (DoDAAC) Accept at Other DoDAAC LPO DoDAAC DCAA Auditor DoDAAC

Other DoDAAC(s) (*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

ACCOUNTING AND APPROPRIATION DATA (AUG 1998)

Accounting and Appropriation Chargeable ACRN Funds Citation Amount Chargeable

AA 5753011 H85 LCHN 355102 4E27A1 63681 78070F 503000 F03000 $0.00

PSR: 744000 FSR: 049194 DSR: 096075

AB 5763011 H86 LCHN 355103 4E27A1 63681 78070F 503000 F03000 $0.00

PSR: 627963 FSR: 045552 DSR: 096581

REFERENCE:

AA ALD:AA CIN: F2DCDE6022A0010000AA

AB ALD:AB CIN: F2DCDE6022A0010000AB

ACRN TOTAL $ 0.00

PART I - THE SCHEDULE

SECTION H

SPECIAL CONTRACT REQUIREMENTS

52.209-1 Qualification Requirements. (Deviation 2026-00038) (2026-02)

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-00038) (2026-02)

52.209-13 Violation of Arms Control Treaties or Agreements-Certification. (Deviation 2026- 00038) (2026-02)

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded.

(Deviation 2026-00038) (2026-02)

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-00038) (Alternate I) (2026-02)

52.215-12 SUBCONTRACTOR CERTIFIED COST OR PRICING DATA (DEVIATION DATE)

52.216-1 TYPE OF CONTRACT (DEVIATION DATE)

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (DEVIATION DATE)

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-00038) (2026-02)

52.219-8 Utilization of Small Business Concerns. (Deviation 2026-00038) (2026-02)

52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-00038) (2026-03)

52.222-20 Contracts for Materials, Supplies, Articles, and Equipment. (Deviation 2026- 00038) (2026-02)

52.222-35 Equal Opportunity for Veterans. (Deviation 2026-00038) (2026-02)

52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-00038) (2026- 02)

52.222-37 Employment Reports on Veterans. (Deviation 2026-00038) (2026-02)

52.222-40 Notification of Employee Rights Under the National Labor Relations Act (Deviations 2026-00038) (2026-02)

52.222-50 Combating Trafficking in Persons. (Deviation 2026-00038) (2026-02)

52.222-90 Addressing DEI Discrimination by Federal Contractors

52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS) (DATE)

52.233-1 Disputes. (Deviation 2026-00038) (2026-02)

52.233-3 Protest after Award. (Deviation 2026-00038) (2026-02)

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-00038) (2026-02)

52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) (2026-02)

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-00038) (2026-02)

252.219-7996 Small Business Subcontracting Plan (DoD Contracts). ALTERNATE II (DEVIATION 2026-00037)

252.227-7989 Rights in Technical Data, Computer Software, and Computer Software Documentation--Other Than Commercial Products and Commercial Services.

ALTERNATE II (DEVIATION 2026-00036)

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026-00025)

252.244-7998 Contractor Purchasing System Administration. (DEVIATION 2026-00015)

252.246-7998 Warranty of Data. ALTERNATE II (DEVIATION 2026-00035)

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026-00038)

52.204-13 System for Award Management-Maintenance. (Deviation 2026-00038)

52.204-7 System for Award Management-Registration. (Deviation 2026-00038)

52.211-5 Material Requirements. (Deviation 2026-00038)

52.215-6 Place of Performance. (Deviation 2026-00038)

52.223-23 Sustainable Products. (Deviation 2026-00038)

52.240-90 Security Prohibitions and Exclusions Representations and Certifications.

(Deviation 2026-00038)

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-00038)

52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026- 00038)

Ombudsman

a. An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

b. Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

c. If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Regina E. Marquardt-Chihuahua at 801 777 -5087 , FAX 000 000 -0000 , email regina.marquardt-chihuahua@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/FLDCOM/DRU ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

d. The ombudsman has no authority to render a decision that binds the agency.

e. Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

52.203-3 GRATUITIES (APR 1984)

(IAW FAR 3.202)

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014)

(IAW FAR 3.404)

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020)

(IAW FAR 3.503-2)

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020)

(IAW FAR 3.502-3)

52.203-8 CANCELLATION, RESCISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR

IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(a))

52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (MAY 2014)

(IAW FAR 3.104-9(b))

52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE CERTAIN FEDERAL TRANSACTIONS

(JUN 2020)

(IAW FAR 3.808(b))

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS (JAN 2017)

(IAW FAR 3.909-3 (b))

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2011)

(IAW DFARS 203.171-4(a), DFARS 212.301(f)(ii))

252.203-7001 PROHIBITION ON PERSONS CONVICTED OF FRAUD OR OTHER DEFENSE-

CONTRACT-RELATED FELONIES (JAN 2023)

(IAW DFARS 203.570-3)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS

(DEC 2022)

(IAW DFARS 203.970)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS

(DEC 2014)

(IAW FAR 4.1202(b))

252.204-7002 PAYMENT FOR SUBLINE ITEMS NOT SEPARATELY PRICED (APR 2020)

(IAW DFARS 204.7109(a))

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992)

(IAW DFARS 204.404-70(b))

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR

REPORTED CYBER INCIDENT INFORMATION (JAN 2023)

(IAW DFARS 204.7304(b))

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT

REPORTING DEVIATION 2024-O0013, REVISION 1 (MAY 2024)

(IAW Class Deviation 2024-O0013 Rev. 1)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION

SUPPORT (JAN 2023)

(IAW DFARS 204.7403(b), DFARS 212.301(f)(i)(F))

252.204-7018 PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE

TELECOMMUNICATIONS EQUIPMENT OR SERVICES (JAN 2023)

(IAW DFARS 204.2105(c))

252.204-7022 EXPEDITING CONTRACT CLOSEOUT (MAY 2021)

(IAW DFARS 204.804-70)

52.209-9 UPDATES OF PUBLICLY AVAILABLE INFORMATION REGARDING

RESPONSIBILITY MATTERS (OCT 2018)

(IAW FAR 9.104-7(c))

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE

GOVERNMENT OF A COUNTRY THAT IS A STATE SPONSOR OF TERRORISM

(MAY 2019)

(IAW DFARS 209.409)

252.209-7010 CRITICAL SAFETY ITEMS (AUG 2011)

(IAW DFARS 209.270-5)

(b) Identification of critical safety items. One or more of the items being procured under this contract is an aviation or ship critical safety item. The following items have been designated aviation critical safety items or ship critical safety items by the designated design control activity:

Line Item Description

0001 NSN: 1377012077090ES

0002 NSN: 1377012077091ES

52.211-11 LIQUIDATED DAMAGES--SUPPLIES, SERVICES OR RESEARCH AND

DEVELOPMENT (SEP 2000)

(IAW FAR 11.503(a))

(a) If the Contractor fails to deliver the supplies or perform the services within the time specified in this contract, the Contractor shall, in place of actual damages, pay to the Government liquidated damages of $ per calendar day of delay.

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

(IAW FAR 11.604(b))

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

52.215-2 AUDIT AND RECORDS--NEGOTIATION (JUN 2020)

(IAW FAR 15.209(b)(1))

52.215-8 ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

(IAW FAR 15.209(h))

52.215-14 INTEGRITY OF UNIT PRICES (NOV 2021)

(IAW FAR 15.408(f)(1))

52.215-14 INTEGRITY OF UNIT PRICES -- ALTERNATE I (OCT 1997)

(IAW FAR 15.408(f)(2))

52.216-23 EXECUTION AND COMMENCEMENT OF WORK (APR 1984)

(IAW FAR 16.603-4(b)(1))

The Contractor shall indicate acceptance of this letter contract by signing three copies of the contract and returning them to the Contracting Officer not later than ??? .

52.216-24 LIMITATION OF GOVERNMENT LIABILITY (APR 1984)

(IAW FAR 16.603-4(b)(2), DFARS 217.7406)

(a) In performing this contract, the Contractor is not authorized to make expenditures or incur obligations exceeding $ dollars.

(b) The maximum amount for which the Government shall be liable if this contract is terminated is $ dollars.

52.217-2 CANCELLATION UNDER MULTIYEAR CONTRACTS (OCT 1997)

(IAW FAR 17.109(a))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN (JAN 2025)

(IAW FAR 19.708(b))

52.219-9 SMALL BUSINESS SUBCONTRACTING PLAN -- ALTERNATE II (NOV 2016)

(IAW FAR 19.708(b)(1)(ii))

52.219-16 LIQUIDATED DAMAGES--SUBCONTRACTING PLAN (SEP 2021)

(IAW FAR 19.708(b)(2))

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS) (DEC 2019) (IAW DFARS 219.708(b)(1)(A), DFARS 219.708(b)(1)(A)(1))

252.219-7003 SMALL BUSINESS SUBCONTRACTING PLAN (DoD CONTRACTS)--ALTERNATE I

(DEC 2019)

(IAW DFARS 219.708(b)(1)(A)(2), DFARS 219.708(b)(1)(A)(1))

252.219-7004 SMALL BUSINESS SUBCONTRACTING PLAN (TEST PROGRAM) (DEC 2022)

(IAW DFARS 219.708(b)(1)(B))

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA

(FEB 2021)

(IAW FAR 23.304(a)(1))

(a) "Hazardous material", as used in this clause, includes any material defined as hazardous under the latest version of Federal Standard No. 313 (including revisions adopted during the term of the contract).

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract.

The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number. This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Identification No. MATERIAL (If none, Insert None) NSN: 1377012077090ES LI 0001 Initiator, Propellant Actuated

LI 0001AA None LI 0001AB None LI 0002 None

NSN: 1377012077091ES LI 0002 Initiator, Propellant Actuated LI 0002AA None LI 0002AB None LI 0003 None

(c) This list must be updated during performance of the contract whenever the Contractor determines that any other material to be delivered under this contract is hazardous.

(d) The apparently successful offeror agrees to submit, for each item as required prior to award, a Material Safety Data Sheet, meeting the requirements of 29 CFR 1910.1200(g) and the latest version of Federal Standard No. 313, for all hazardous material identified in paragraph (b) of this clause. Data shall be submitted in accordance with Federal Standard No. 313, whether or not the apparently successful offeror is the actual manufacturer of these items. Failure to submit the Material Safety Data Sheet prior to award may result in the apparently successful offeror being considered nonresponsible and ineligible for award.

(e) If, after award, there is a change in the composition of the item(s) or a revision to Federal Standard No. 313, which renders incomplete or inaccurate the data submitted under paragraph (d) of this clause, the Contractor shall promptly notify the Contracting Officer and resubmit the data.

(f) Neither the requirements of this clause nor any act or failure to act by the Government shall relieve the Contractor of any responsibility or liability for the safety of Government, Contractor, or subcontractor personnel or property .

(g) Nothing contained in this clause shall relieve the Contractor from complying with applicable Federal, State, and local laws, codes, ordinances, and regulations (including the obtaining of licenses and permits) in connection with hazardous material.

(h) The Government's rights in data furnished under this contract with respect to hazardous material are as follows:

(1) To use, duplicate and disclose any data to which this clause is applicable. The purposes of this right are to—

(i) Apprise personnel of the hazards to which they may be exposed in using, handling, packaging, transporting, or disposing of hazardous materials;

(ii) Obtain medical treatment for those affected by the material; and

(iii) Have others use, duplicate, and disclose the data for the Government for these purposes.

(2) To use, duplicate, and disclose data furnished under this clause, in accordance with subparagraph (h)(1) of this clause, in precedence over any other clause of this contract providing for rights in data.

(3) The Government is not precluded from using similar or identical data acquired from other sources.

252.223-7001 HAZARD WARNING LABELS (DEC 1991)

(IAW DFARS 223.304)

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labeled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

ACT MATERIAL (If None, Insert “None.”) LI 0001 Initiator, Propellant Actuated LI 0001AA None LI 0001AB None LI 0002 None LI 0002 Initiator, Propellant Actuated LI 0002AA None LI 0002AB None LI 0003 None

252.223-7002 SAFETY PRECAUTIONS FOR AMMUNITION AND EXPLOSIVES (NOV 2023)

(IAW DFARS 223.370-5)

252.223-7003 CHANGE IN PLACE OF PERFORMANCE--AMMUNITION AND EXPLOSIVES

(DEC 1991)

(IAW DFARS 223.370-5)

252.223-7007 SAFEGUARDING SENSITIVE CONVENTIONAL ARMS, AMMUNITION, AND

EXPLOSIVES (NOV 2023)

(IAW DFARS 223.7203)

(b) The requirements of DoD 5100.76-M apply to the following items of AA&E being developed, produced, manufactured, or purchased for the Government, or provided to the Contractor as Government-furnished property under this contract:

Item No Nomenclature National Stock Number Sensitivity/Category 0001 Initiator, Propellant Actuated 1377012077090 0002 Initiator, Propellant Actuated 1377012077091

0003 DATA

252.223-7008 PROHIBITION OF HEXAVALENT CHROMIUM (JAN 2023)

(IAW DFARS 223.7306, DFARS 212.301(f)(xxi))

252.223-7009 PROHIBITION OF PROCUREMENT OF FLUORINATED AQUEOUS FILM-FORMING

FOAM FIRE-FIGHTING AGENT FOR USE ON MILITARY INSTALLATIONS

(MAR 2024)

(IAW DFARS 223.7404)

52.224-3 PRIVACY TRAINING (JAN 2017)

(IAW FAR 24.302(a))

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM--BASIC (FEB 2024)

(IAW DFARS 225.1101(2)(i) and (2)(ii))

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (MAR 2022)

(IAW DFARS 225.1101(3))

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM

COMMUNIST CHINESE MILITARY COMPANIES (DEC 2018)

(IAW DFARS 225.1103(4))

252.225-7008 RESTRICTION ON ACQUISITION OF SPECIALTY METALS (MAR 2013)

(IAW DFARS 225.7003-5(a)(1), DFARS 212.301(f)(xxiv))

252.225-7009 RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING SPECIALTY

METALS (JAN 2023)

(IAW DFARS 225.7003-5(a)(2), DFARS 212.301(f)(xxv))

252.225-7012 PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (APR 2022)

(IAW DFARS 225.7002-3(a))

252.225-7013 DUTY-FREE ENTRY (NOV 2023)

(IAW DFARS 225.1101(4))

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013)

(IAW DFARS 225.7901-4)

252.225-7052 RESTRICTION ON THE ACQUISITION OF CERTAIN MAGNETS, TANTALUM, AND

TUNGSTEN (MAY 2024)

(IAW DFARS 225.7018-5)

252.225-7056 PROHIBITION REGARDING BUSINESS OPERATIONS WITH THE MADURO REGIME

(JAN 2023)

(IAW DFARS 225.7020-5(b))

252.225-7060 PROHIBITION ON CERTAIN PROCUREMENTS FROM THE XINJIANG UYGHUR

AUTONOMOUS REGION (JUN 2023)

(IAW DFARS 225.7022-5(b))

252.225-7061 RESTRICTION ON THE ACQUISITION OF PERSONAL PROTECTIVE EQUIPMENT

AND CERTAIN OTHER ITEMS FROM NON-ALLIED FOREIGN NATIONS (JAN 2023)

(IAW DFARS 225.7023-4)

252.225-7967 PROHIBITION REGARDING RUSSIAN FOSSIL FUEL BUSINESS OPERATIONS

(DEVIATION 2024-O0006, REVISION 1) (FEB 2024) (FEB 2024)

(IAW CLASS DEVIATION 2024-O0006, REVISION 1)

252.225-7972 PROHIBITION ON THE PROCUREMENT OF FOREIGN-MADE UNMANNED AIRCRAFT

SYSTEMS (AUG 2024) (DEVIATION 2024-O0014) (AUG 2024)

(IAW Deviation 2024-O0014)

52.226-7 DRUG-FREE WORKPLACE (MAY 2024)

(IAW FAR 26.506)

52.226-8 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE

DRIVING (MAY 2024)

(IAW FAR 26.605)

252.226-7001 UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC

ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (JAN 2023)

(IAW DFARS 226.104)

52.227-1 AUTHORIZATION AND CONSENT (JUN 2020)

(IAW FAR 27.201-2(a)(1))

52.227-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT

INFRINGEMENT (JUN 2020)

(IAW FAR 27.201-2(b))

52.229-3 FEDERAL, STATE, AND LOCAL TAXES (FEB 2013)

(IAW FAR 29.401-3(a))

52.229-4 FEDERAL, STATE, AND LOCAL TAXES (STATE AND LOCAL ADJUSTMENTS)

(FEB 2013)

(IAW FAR 29.401-3(b))

52.229-12 TAX ON CERTAIN FOREIGN PROCUREMENTS (FEB 2021)

(IAW 29.402-3(b))

252.229-7014 FULL EXEMPTION FROM TWO-PERCENT EXCISE TAX ON CERTAIN FOREIGN

PROCUREMENTS. (OCT 2022)

(IAW DFARS 229-402(k))

252.231-7000 SUPPLEMENTAL COST PRINCIPLES (DEC 1991)

(IAW DFARS 231.100-70)

52.232-1 PAYMENTS (APR 1984)

(IAW FAR 32.111(a)(1))

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002)

(IAW FAR 32.111(b)(1))

52.232-11 EXTRAS (APR 1984)

(IAW FAR 32.111(c)(2))

52.232-17 INTEREST (MAY 2014)

(IAW FAR 32.611(a), FAR 32.611(b))

52.232-23 ASSIGNMENT OF CLAIMS (MAY 2014)

(IAW FAR 32.806(a)(1))

52.232-25 PROMPT PAYMENT (JAN 2017)

(IAW FAR 32.908(c))

(a) Invoice payments—

(5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

(i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER--SYSTEM FOR AWARD

MANAGEMENT (OCT 2018)

(IAW FAR 32.1110(a)(1))

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013)

(IAW FAR 32.706-3)

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS

SUBCONTRACTORS (MAR 2023)

(IAW FAR 32.009-2)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS

(DEC 2018)

(IAW DFARS 232.7004(a))

(a) Definitions. As used in this clause—

(1) “Contract financing payment” and “invoice payment” have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) “Electronic form” means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer.

(3) “Payment request” means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/ .

(c) The Contractor may submit a payment request and receiving report using other than WAWF only when—

(1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF;

(2) DoD is unable to receive a payment request or provide acceptance in electronic form;

(3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer’s determination with each request for payment; or

(4) DoD makes a payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System).

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006)

(IAW DFARS 232.7102)

52.242-5 PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (JAN 2017)

(IAW FAR 42.1504)

52.242-13 BANKRUPTCY (JUL 1995)

(IAW FAR 42.903)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991)

(IAW DFARS 243.205-70)

252.243-7002 REQUESTS FOR EQUITABLE ADJUSTMENT (DEC 2022)

(IAW DFARS 243.205-71)

52.244-2 SUBCONTRACTS (JUN 2020)

(IAW FAR 44.204(a)(1), FAR 44.204(a)(3))

(d) If the Contractor has an approved purchasing system, the Contractor nevertheless shall obtain the Contracting Officer's written consent before placing the following subcontracts:

Subcontracts

(j) Paragraphs (c) and (e) of this clause do not apply to the following subcontracts, which were evaluated during negotiations:

Subcontracts

52.244-5 COMPETITION IN SUBCONTRACTING (AUG 2024)

(IAW FAR 44.204(c))

52.246-23 LIMITATION OF LIABILITY (FEB 1997)

(IAW FAR 46.805(a)(1))

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JAN 2023)

(IAW DFARS 246.370(a), DFARS 212.301(f)(xii))

52.247-1 COMMERCIAL BILL OF LADING NOTATIONS (FEB 2006)

(IAW FAR 47.104-4(a), FAR 47.104-4(b))

252.247-7023 TRANSPORTATION OF SUPPLIES BY SEA--BASIC (OCT 2024)

(IAW DFARS 247.574(a) and (a)(1))

52.248-1 VALUE ENGINEERING (JUN 2020)

(IAW FAR 48.201(b), FAR 48.201(f))

52.249-2 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE)

(APR 2012)

(IAW FAR 49.502(b)(1)(i))

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984)

(IAW FAR 49.504(a)(1))

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

(IAW FAR 52.107(b))

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text.

Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Regulations URLs: (Click on the appropriate regulation.)

https://acquisition.gov/browse/index/far https://acquisition.gov/dfars https://acquisition.gov/affars

NOTE: After selecting the appropriate regulation above, at the "Table of Contents" page, conduct a search for the desired regulation reference using your browser's FIND function. When located, click on the regulation reference (hyperlink).

52.252-4 ALTERATIONS IN CONTRACT (APR 1984)

(IAW FAR 52.107(d))

(The above Clause/Provision has been modified.)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(IAW FAR 52.107(f))

(a) The use in this contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this contract of any Defense Federal Acquisition Regulation Supplement (48 CFR Chapter 2).clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

52.253-1 COMPUTER GENERATED FORMS (JAN 1991)

(IAW FAR 53.111)

PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

SECTION J

LIST OF ATTACHMENTS

Form Number Description/File Name Date Number of Pages DD 1423 CDRLs 10FEB2025 9

ADC SOW 01JAN2018 3

AIR SPEC 04FEB2025 5

CADPAD Item Marking Instruction Ver 1.6 06MAR2023 10

Item Description 1377012077090 13JUL2023 1

Item Description 1377012077091 13JUL2023 1

REPSHIP UNDATED 1

ES7034 UNDATED 1

Packaging SOW 00SEP2023 4

SPI_F012077089 UNDATED 6

EDL_1377012077090 19MAY2023 1

EDL_1377012077091 19MAY2023 1

JFQR B-1B Type II Hatch Jettison Handle 25FEB2025 3

JFQR B-1B Type III Hatch Jettison Handle 25FEB2025 3

JHCS_1377012077090 30OCT2024 1

JHCS_1377012077091 30OCT2024 1

PART IV - REPRESENTATIONS AND INSTRUCTIONS

SECTION K

REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS

OF OFFERORS OR RESPONDENTS

52.203-2 CERTIFICATE OF INDEPENDENT PRICE DETERMINATION (APR 1985)

(IAW FAR 3.103-1)

(b) Each signature on the offer is considered to be a certification by the signatory that the signatory-- (2)(i) Has been authorized, in writing, to act as agent for the following principals in certifying that those principals have not participated, and will not participate in any action contrary to subparagraphs (a)(1) through (a)(3) of this provision __________________________________________ [insert full name of person(s) in the offeror's organization responsible for determining the prices offered in this bid or proposal, and the title of his or her position in the offeror's organization];

52.203-11 CERTIFICATION AND DISCLOSURE REGARDING PAYMENTS TO INFLUENCE

CERTAIN FEDERAL TRANSACTIONS (SEP 2024)

(IAW FAR 3.808(a))

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN

INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS--

REPRESENTATION (JAN 2017)

(IAW FAR 3.909-3 (a))

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS

(SEP 2022)

(IAW DFARS 203.171-4(b))

252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)

(IAW DFARS 204.1202)

Substitute the following paragraphs (b), (d), and (e) for paragraphs (b) and (d) of the provision at FAR 52.204-8:

(b)(1) If the provision at FAR 52.204-7, System for Award Management, is included in this solicitation, paragraph (e) of this provision applies.

(2) If the provision at FAR 52.204-7, System for Award Management, is not included in this solicitation, and the Offeror has an active registration in the System for Award Management (SAM), the Offeror may choose to use paragraph (e) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The Offeror shall indicate which option applies by checking one of the following boxes:

___ (i) Paragraph (e) applies.

___ (ii) Paragraph (e) does not apply and the Offeror has completed the individual representations and certifications in the solicitation.

(d) (1) The following representations or certifications in the SAM database are applicable to this solicitation as indicated:

(i) 252.204–7016, Covered Defense Telecommunications Equipment or Services—Representation. Applies to all solicitations.

(ii) 252.216-7008, Economic Price Adjustment--Wage Rates or Material Prices Controlled by a Foreign Government--Representation. Applies to solicitations for fixed-price supply and service contracts when the contract is to be performed wholly or in part in a foreign country, and a foreign government controls wage rates or material prices and may during contract performance impose a mandatory change in wages or prices of materials.

(iii) 252.225-7042, Authorization to Perform. Applies to all solicitations when performance will be wholly or in part in a foreign country.

(iv) 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services— Representation. Applies to solicitations for the acquisition of commercial satellite services.

(v) 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism. Applies to all solicitations expected to result in contracts of $150,000 or more.

(vi) 252.229-7012, Tax Exemptions (Italy)--Representation. Applies to solicitations when contract performance will be in Italy.

(vii) 252.229-7013, Tax Exemptions (Spain)--Representation. Applies to solicitations when contract performance will be in Spain.

(2) The following representations or certifications in SAM are applicable to this solicitation as indicated by the Contracting Officer; [Contracting Officer check as appropriate.] __ _ (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.

__X _ (ii) 252.225-7000, Buy American —Balance of Payments Program Certificate.

__ _ (iii) 252.225-7020, Trade Agreements Certificate.

__ _ Use with Alternate I __ _ (iv) 252.225-7031, Secondary Arab Boycott of Israel.

__ _ (v) 252.225-7035, Buy American —Free Trade Agreements—Balance of Payments Program Certificate.

__ _ Use with Alternate I.

__ _ Use with Alternate II.

__ _ Use with Alternate III.

__ _ Use with Alternate IV.

__ _ Use with Alternate V.

(vi) 252.226-7002, Representation for Demonstration Project for Contractors Employing Persons with Disabilities.

(vii) 252.232–7015, Performance-Based Payments—Representation.

(e) The Offeror has completed the annual representations and certifications electronically via the SAM website at https://www.acquisition.gov/.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .