Questions and Answers.pdf
PDF 134 KB Posted
- Attached to
- Interface Enclosure Assemblies
- Solicitation number
- FA813926Q0025
About this file
This is a Questions and Answers document for federal contract opportunity FA813926Q0025 regarding Interface Enclosure Assemblies. The document addresses two key inquiries from potential contractors.
The first question clarifies security and clearance requirements, confirming that no facility security clearance, CMMC (Cybersecurity Maturity Model Certification) at any level, or personnel badging/screening under TAFBI 31-101 is required to receive the Technical Data Package or perform the contract. The second question pertains to Part Number 201411508 (Frame, Interface Enclosure) and provides welding specifications for aluminum bars that comprise the assembly. The government specifies that all aluminum bars must be welded together, with all joints finished and ground flat on the outer frame. Contractors must perform their typical in-house welding practices for Aluminum 6061 material and conduct visual inspection of welds for cracks, porosity, and incomplete fusion. No additional formal weld callouts or external welding specifications beyond standard in-house practices are required.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Interface Enclosure Assemblies
FA813926Q0025
Questions and Answers
1. Is a facility security clearance or CMMC certification required to receive the Technical Data
Package? Is CMMC Level 2 (or any CMMC level) required for award or performance of this contract? Does receiving or handling the Distribution D drawings require any personnel to be badged, screened, or cleared under TAFBI 31-101?
Answer: No, CMMC or any other type of security clearance is not required with regards to this requirement.
2. P/N 201411508 Frame, Interface Enclosure looks like a welded assembly based on how some of the corners are drawn (see below), but there are no notes or weld callouts. If this is welded together, can you provide the weld callouts and associated weld spec?
Answer: All of the Aluminum bars called out in the parts list need to be welded together.
• Finish weld all joints and grind flat on the outer frame.
• Perform their typical in-house welding practice for Aluminum 6061.
• Perform a visual inspection of the welds and look for cracks, porosity, and incomplete fusion.
File details come from the government source that posted it. Updated .