Spec_521125.pdf

Specifications

STH-52-.50-H/AC

StableClimate II Temperature/Humidity Stability Chamber

ISO9001 Registered • ISO17025 Accredited (A2LA)

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

FEATURES

Cabinet Items:

▪ Stainless steel interior with white powder-coated exterior

▪ Six (6) adjustable, solid, slide-out shelves

▪ One (1) 2" access port centered in right hand side

▪ Heated, glass doors with lock

Refrigeration Items:

▪ .50HP R-134A Single Refrigeration System

▪ Hermetic Compressor, Integral Air-Cooled Condenser

Instrument Items:

▪ EZT-570S 4" touch screen controller, 21 CFR Part 11 compliant

▪ Ethernet & RS-485 Computer Interface

▪ Solid state humidity sensor

▪ IQ/OQ/PQ protocol provided free of charge upon request. Onsite validation additional

Other:

▪ Watch the StableClimate II Product Feature Video: https://youtu.be/T7EqNS1Y6Ok

▪ View the Brochure: https://www.cszindustrial.com/Products/Temperature-Humidity-Chambers/Constant-Climate-

Chambers.aspx

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

DIMENSIONAL DATA

Test Space Volume

52 Cubic Ft. (1473 L)

Test Space Dimensions

(clear usable workspace)

54”W x 28”D x 60.5”H (1372mm x 711mm x 1537mm)

Shelving Information

4.4 ft2 (0.4 m2) each; shelf load rating is 75 lbs. (34kg) per shelf with a maximum of 600 lbs. (272kg)

Overall Exterior Dimensions

(approximate)

65”W x 35”D x 90”H (1651mm x 889mm x 2286mm) Note: there should be a minimum of 18” (457mm) above unit of clearance for proper heat dissipation

Shipping Dimensions

(approximate)

Domestic: 74" W x 44” D x 98” H (1880mm x 1118mm x 2489mm)

International: 75” W x 45” D x 101” H (1905mm x 1143mm x 2565mm)

Shipping Weight

(Approximate. Certain options can increase these values)

Approximately 1,500 lbs (680 kg)

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

PERFORMANCE DATA – TEMPERATURE

Temperature Range: +2°C to +70°C (+36°F to +158°F)

Control & Stability: Temperature Control: ±0.3°C. Temperature Uniformity: ±1°C up to +60°C (±0.6°C from +25°C to +50°C)

Humidity Control: ±3%. Humidity Uniformity: ±4%.

Control derived from the deviation of the temperature control sensor from the set point. Uniformity derived from the maximum deviation of 9 thermocouples placed on 3 horizontal planes.

Refer to CSZ dwg ST-Uniformity Rev B for details.

Notes: Conditions at steady state conditions after stabilization. These chambers are designed to operate in a commercial environment with a temperature of +24°C ± 6°C (+75°F ±10°F), maximum dew point of +12.8°C (+55°F) and a maximum altitude of 7,000ft (2,133.6 M). This product is intended for indoor use only. If you are planning to place this in a location which does not meet these criteria, please consult factory so the proper product can be quoted. Certain options will affect performance.

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

PERFORMANCE DATA – HUMIDITY

Humidity Range: 20% to 95% relative humidity as limited by a +50°C (+122°F) maximum dry bulb temperature, a 11°C (52°F) minimum dewpoint temperature

Control & Stability: Humidity Control: ±3%. Humidity Uniformity: ±4%.

Note: Humidity control will be affected by the addition of live load

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

PERFORMANCE DATA – HUMIDITY

FACILITIES & UTILITIES DATA

Humidity Water Requirements & Information:

- De-ionized (DI) water is recommended for use with our humidity systems

- Water should be provided within 0.05 to 2 MegaOhms resistivity

- Distilled water or reverse osmosis (RO) water outside of these limits may cause corrosion

- Tap water may be used with our optional *Demineralizer Filtration System

- A *Recirculating Humidity Water Supply System is also available (*see options)

- Inlet water pressure should be 25 PSI, use *Water Pressure Regulator (*see options)

- Connection Size: 0.25" (6.35mm) N.P.T.

- Drain Size: 0.5" (12.7mm)

- Water Consumption: Approximately 0.2-0.4 GPH (0.8-1.5 LPH) of water (dependent upon live load)

Note: When operating at high temperature and humidity etching of the glass may occur and is a normal occurrence

Heat Rejection:

(into your building’s room)

Approximately 2460 watts (8,400 BTU/hr) maximum during cooling operation

Heat Rejection Note: Integral air-cooled models require an ambient temperature range between +21.1°C (+70°F) TO +26.7°C (+80°F) for proper operation and performance.

Electrical Information:

(±5%)

208V or 240V, 1 phase, 50/60 Hertz, 22 FLA, 30 amp minimum service (customer to supply power cord and plug)

**Refer to option list other available standard input voltages

Notes:

- All values are approximate (if provided)

- Please contact factory for final values when determining your required utilities or refer to chamber’s layout/approval drawing

- 50 hertz also available, contact factory for details

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

GENERAL ARRANGEMENT

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

CONTROLLER

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

VOLTAGE OPTIONS AVAILABLE

MUST SELECT OPTION FOR YOUR ORDER

☐ 208V or 240V, 1 phase, 50/60 Hertz, 22 FLA, 30 amp minimum service (customer to supply power cord and plug)

CHAMBER OPTIONS

Customer Event Option, for EZT Controller, includes fifteen (15) event outputs with connection panel & removable plug connectors. Designed to turn customer’s electronic DUT’s (devices under test) ON or OFF at various stages of the customer programmed test profile. Each output may also be configured to perform other operations including alarm or profile status indicators

Spare Humidity Demineralizer Cartridge

Water Regulator to regulate incoming water to 25 psig (not required with Recirculating Water Option). Note: This is not required with recirculating water option.

Digital High/Low Temperature Limit and Alarm (Model L-91) both Independent from chamber's controller. Designed to shut down chamber if temperature exceeds customer limit set points

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

Model 100, Reverse Osmosis Water System. This option is shipped separate. Customer is responsible for installation. Contact Factory for more detailed information. Please note: For use with city/tap water. Do not use this option in conjunction with Demineralizer filter systems.

Model 300, Reverse Osmosis Water System. This option is shipped separate. An 110V GFI power source is required. Customer is responsible for installation. Contact Factory for more detailed information. Please note: For use with city/tap water. Do not use this option in conjunction with Demineralizer filter systems.

Chart Recorder 6” (152mm) Temperature/Humidity Factory Installed. Please specify 24 hr or 7 day chart and degree C or F at time of order. Please add an additional 3 weeks to lead time.

Recirculating Humidity Water Supply System, 5 Gallons (18.9 L)

Note: This option includes the Humidity Water Demineralizer Filtration System and adds appropriately 8” (20cm) to the chamber’s depth.

Includes separate 115V plug and condensate pump

Humidity Water Demineralizer Filtration System (this option adds approximately 4.75” (121mm) to the chamber depth. Note: This is not needed for those customers that already have a de-ionized or RO water supply)

LED Lights located in front side of walls - lights span the entire height of the workspace

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

Additional 2" (51mm) circular port with plug installed on rear wall - please specify port location at time of order

Additional 3" (76mm) circular port with plug installed on rear wall - please specify port location at time of order

Additional Solid Stainless Steel, Slide-Out Shelf Kit (includes two (2) shelves, rails & spacers) -

ST(H)-52

☐ Low RH provides control at lower humidity points (please see humidity chart for specified range)

☐ Condensate pump for customers that do not have chamber drain for humidity water

Start-up and Training by CSZ factory technician or ISO (Independent Service Organization), non-union. Sales tax is not included. Customer must have all required utilities connected to the chamber prior to start-up and training session. Note: please complete the “Start-up Training Survey” and send to CSZ Service Department to request described service.

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

Estimated Shipping Cost

- Final shipping cost to be provided at actual shipment

- Customer must have loading dock & forklift to properly receive chamber

- Shipping terms are F.O.B. Origin, Cincinnati, OH

- Freight prepaid and add or (Air-Ride Equipped, LTL Service)

- Sales tax is not included

Note: Customer is responsible to check the condition of the shipment and make written notation on the transport document before accepting the shipment. Failure to make notations on the carrier’s Bill of Lading will limit your claim. The title to this equipment has been transfer to you from the CSZ Products and the shipper (CSZ Products) is not responsible for filing of damage claims with the carrier.

☐ Chamber built to pass on-site CSA inspection (inspection not included)

-Adds "S" to the end of the model prefix (i.e. ZPHS)

-Please add two (2) weeks to lead time

Note: CSZ models are not CSA, UL-C or Ontario Hydro marked. Please budget appropriately and obtain local inspection if required. Add appropriate electrical devices and disconnects if required. If planning on a local CSA Inspection, CSZ recommends that QPS Evaluation Services, Inc. performs the CSA Inspection. To schedule an inspection, please contact QPS Evaluation Services, Inc. at customerservice@qps.ca; customer responsible for any additional charges to pass on-site CSA inspection.

ST(H)-52, IPPC closed crate

Cincinnati Sub Zero Products. • 12011 Mosteller Road • Cincinnati, Ohio 45241 USA • Tel 513-326-5252 • Fax -5258

QUALITY

The quality design and engineering of our products are known throughout the industry. We ensure the quality and reliability of every product we manufacture with design review meetings, incoming and in-process inspections, vendor auditing, and validation testing. Our ISO-9001:2015 certification, combined with our quality processes ensures you are purchasing the most reliable chamber in the industry.