Combined_Synopsis_Solicitation_(Services_over_SAT)(3).pdf

Thermal Spray Evaluation Services Tinker AFB, OK

Solicitation # FA8132-19-Q-A005

This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.603, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued aside from the one posted here.

This solicitation is being issued as a request for quotation (RFQ) IAW FAR Part 13. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2019-01, Defense Federal Acquisition Regulation Supplement Change Notice (DPN) 20180928, and Air Force Acquisition Circular (AFAC) 2018-0525.

The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMC) at Tinker Air Force Base, Oklahoma, will award a Firm Fixed Price (FFP) contract for the acquisition of inspection, analysis, test and evaluation services of thermal spray coatings In Accordance With (IAW) the attached PWS. See Section 2 – Supplies/Services and Price.

SERVICE LOCATION

These services will be performed at the contractor’s facility.

QUOTE SUBMISSION INFORMATION

Quotes are due to the point of contact (POC) below by 31 January 2019/12:00 PM (Noon Central Standard Time)

Primary POC Alt POC

Tim Gaines David W. Herrig Contract Specialist Contract Officer paul.gaines.1@us.af.mil david.herrig.1@us.af.mil 405-582-1833 405-739-5819 mailto:paul.gaines.1@us.af.mil mailto:david.herrig.1@us.af.mil

TERMS, CONDITIONS, PROVISIONS, & CLAUSES

Payment terms will be Net 30. You may offer payment discounts for early payment, but this will not be considered in quote evaluation.

Invoices must be submitted in the Government’s Invoicing, Receipt, Acceptance, & Property Transfer (iRAPT) Online Application, which can be found in the Wide Area Workflow e-Business Suite (WAWF; https://wawf.eb.mil). Payment will be made after the invoice is signed in iRAPT and after the item is received and accepted by the Government; do not submit invoices until the item has been delivered.

Standard commercial warranties apply.

52.212-1 -- Instructions to Offerors – Instructions to Offerors -- Commercial

The Offeror shall provide firm fixed prices for the CLINs in the spaces provided in Section 2. The CLINs are as follows --

Basic Year 0001 Bond Strength Testing 0002 Single Layer Aerospace Coating Analysis 0003 Dual Layer Aerospace Coating Analysis 0004 Single Layer Aerospace Coating Analysis (Micro-Hardness) 0005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) 0006 Rockwell Hardness Testing

Option Year 1 1001 Bond Strength Testing 1002 Single Layer Aerospace Coating Analysis 1003 Dual Layer Aerospace Coating Analysis 1004 Single Layer Aerospace Coating Analysis (Micro-Hardness) 1005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) 1006 Rockwell Hardness Testing Option Year 2 2001 Bond Strength Testing 2002 Single Layer Aerospace Coating Analysis 2003 Dual Layer Aerospace Coating Analysis 2004 Single Layer Aerospace Coating Analysis (Micro-Hardness) 2005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) 2006 Rockwell Hardness Testing Option Year 3 3001 Bond Strength Testing 3002 Single Layer Aerospace Coating Analysis 3003 Dual Layer Aerospace Coating Analysis 3004 Single Layer Aerospace Coating Analysis (Micro-Hardness) 3005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) 3006 Rockwell Hardness Testing Option Year 4 4001 Bond Strength Testing 4002 Single Layer Aerospace Coating Analysis 4003 Dual Layer Aerospace Coating Analysis 4004 Single Layer Aerospace Coating Analysis (Micro-Hardness) 4005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) 4006 Rockwell Hardness Testing

(b) Options. The Government will evaluate the contractor’s quote for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(d) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

https://wawf.eb.mil/

a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price – the Government will award this requirement based on the lowest overall price of all items that conform to the technical requirement.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 -- Offeror Representations and Certifications -- Commercial Items.

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-3 -- Offeror Representations and Certifications -- Commercial Items.

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site located at http://www.sam.gov/portal (Only complete and return if there are changes to current SAM Registration. If 52.212-3 is not returned the contractor is affirming that the current SAM registration is current, accurate, and complete). If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (u) of this provision.

52.212-4 -- Contract Terms and Conditions -- Commercial Items

52.212-5 -- Contract Terms and Conditions Required to Implement Statues or Executive Orders—Commercial Items

52.217-5 -- Evaluation of Options (Jul 1990)

52.217-8 -- Option to Extend Services (Nov 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract.

These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 20 days of the end of the current period of performance.

52.217-9 -- Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 20 days of the end of the current period of performance; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 20 days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years and 6 months.

52.222-42 -- Statement Of Equivalent Rates For Federal Hires (May 2014)

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

THIS STATEMENT IS FOR INFORMATION ONLY: IT IS NOT A WAGE DETERMINATION

Employee Class Monetary Wage Fringe Benefits 541380 Testing Laboratories $20.56/hr See wage determination

Clauses/Provisions IAW FAR 12.30:

52.204-16, Commercial and Government Entity Code Reporting 52.204-18, Commercial and Government Entity Code Maintenance 52.209-5, Certification Regarding Responsibility Matters 52.232-40, Providing Accelerated Payments to Small Business subcontractors

The following clauses within 52.212-5 are included but not limited to:

52.203-6, Restrictions on Subcontractor Sales to the Government 52.203-13, Contractor Code of Business Ethics and Conduct 52.204-10, Reporting Executive Compensation and First-Tier Subcontract 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment 52.219-14, Limitations on Subcontracting 52.219-28, Post Award Small Business Program Representation 52.222-3, Convict Labor 52.222-19, Child Labor—Cooperation with Authorities and 52.222-21, Prohibition of Segregated Facilities 52.222-26, Equal Opportunity 52.222-35, Equal Opportunity for Veterans 52.222-36, Equal Opportunity for Workers with Disabilities 52.222-37, Employment Reports on 52.222-40, Notification of Employee Rights Under the National Labor Relations 52.222-50, Combating Trafficking in Persons 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving On Base

The following DFARS clauses are included but not limited to:

252.203-7000, Requirements Relating to Compensation of Former DoD Officials 252.203-7003, Agency Office of the Inspector General 252.203-7005, Representation Relating to Compensation of Former DoD Officials 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support 252.223-7008, Prohibition of Hexavalent Chromium 252.225-7000, Buy American—Balance of Payments Program Certificate 252.225-7001, Buy American and Balance of Payments Program 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports 252.232-7006, Wide Area WorkFlow Payment Instructions 252.232-7010, Levies on Contract Payments 252.243-7002, Requests for Equitable Adjustment 252.244-7000, Subcontracts for Commercial Items 252.247-7022, Representation of Extent of Transportation by Sea

All clauses and provisions can be found on the following websites:

Federal Acquisition Regulation (FAR) – http://farsite.hill.af.mil/vffara.htm Defense Federal Acquisition Regulation Supplement (DFARS) – http://farsite.hill.af.mil/vfdfara.htm Air Force Federal Acquisition Regulation Supplement (AFFARS) – http://farsite.hill.af.mil/vfaffara.htm

LIST OF ATTACHMENTS

# OF

FORM # DESCRIPTION DATE PAGES

N/A PWS 20 Sep 2018 7 Appendix A GFP Attachment 10 January 2019 1 N/A Wage Determination 15-5316 (Rev 7) 26 Dec 2017 11

Offeror is required to return the portion of this CSS below with the completed information and authorized signature. Offeror may provide their company’s quotation sheet in addition to this response page.

SECTION 1 – OFFEROR INFORMATION

Company Name Address

CAGE Code and DUNS Number

The Government cannot enter into contracts or agreements with contractors not registered in SAM. For registration information, visit the SAM website (https://www.sam.gov/) and follow the instructions in the Quick Start Guide For SAM Registration, which can be found under the Help Tab and User Guides submenu.

Small Business Size Web Page URL Point of Contact POC Phone # and email address

SECTION 2 – SUPPLIES/SERVICES AND PRICE

http://farsite.hill.af.mil/vffara.htm http://farsite.hill.af.mil/vfdfara.htm http://farsite.hill.af.mil/vfaffara.htm

BASE YEAR

CLIN

Description/Product

Qty

Unit Price

Total Price

0001 Bond Strength Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

1 Lot $ $

TOTAL PRICE FOR BASE YEAR

0002 Single Layer Aerospace Coating Analysis – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

0003 Dual Layer Aerospace Coating Analysis – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

0004 Single Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, OPTION YEAR 1 supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

0005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

0006 Rockwell Hardness Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

1001 Bond Strength Testing – 01 Feb 2020 - 31 Jan 2021

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

TOTAL PRICE FOR OPTION YEAR 1

1002 Single Layer Aerospace Coating Analysis – 01 Feb 2020 - 31 Jan 2021

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

1003 Dual Layer Aerospace Coating Analysis – 01 Feb 2020 - 31 Jan 2021

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

1004 Single Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2020 - 31 Jan 2021

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

1005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in

OPTION YEAR 2

the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

2006 Rockwell Hardness Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

TOTAL PRICE FOR Option YEAR 1

2001 Bond Strength Testing – 01 Feb 2021 - 31 Jan 2022

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

TOTAL PRICE FOR OPTION YEAR 2

2002 Single Layer Aerospace Coating Analysis – 01 Feb 2021 - 31 Jan 2022

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

2003 Dual Layer Aerospace Coating Analysis – 01 Feb 2021 - 31 Jan 2022

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

2004 Single Layer Aerospace Coating Analysis (Micro-Hardness)– 01 Feb 2021 - 31 Jan 2022

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

2005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

OPTION YEAR 3

2006 Rockwell Hardness Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

3001 Bond Strength Testing – 01 Feb 2022 - 31 Jan 2023

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

TOTAL PRICE FOR OPTION YEAR 3

3002 Single Layer Aerospace Coating Analysis – 01 Feb 2022 - 31 Jan 2023

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

3003 Dual Layer Aerospace Coating Analysis – 01 Feb 2022 - 31 Jan 2023

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the

OPTION YEAR 4

manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

3004 Single Layer Aerospace Coating Analysis (Micro-Hardness – 01 Feb 2022 - 31 Jan 2023

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

3005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

3006 Rockwell Hardness Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

CLIN Description/Product Qty Unit Price Total Price 4001 Bond Strength Testing – 01 Feb 2023 - 31 Jan 2024

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

TOTAL PRICE FOR OPTION YEAR 4

4002 Single Layer Aerospace Coating Analysis – 01 Feb 2023 - 31 Jan 2024

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

4003 Dual Layer Aerospace Coating Analysis – 01 Feb 2023 - 31 Jan 2024

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

4004 Single Layer Aerospace Coating Analysis (Micro-Hardness)– 01 Feb 2023 - 31 Jan 2024

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to the services listed in the PWS. The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the

Payment Terms / Discount Terms

NET 30 / _______% In _______ Days After Invoice Submission in iRAPT

NOTES:

All quotes are valid for no less than 90 days.

4005 Dual Layer Aerospace Coating Analysis (Micro-Hardness) – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to provide Preventive Maintenance Services to the Propulsion Maintenance Group (PMXG) at Tinker AFB, OK.

The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

4006 Rockwell Hardness Testing – 01 Feb 2019 - 31 Jan 2020

NON-PERSONAL SERVICES: The contractor shall provide all labor, tools, equipment, supplies, personal protective and other incidentals necessary to provide Preventive Maintenance Services to the Propulsion Maintenance Group (PMXG) at Tinker AFB, OK.

The contractor shall be responsible for insuring all services and supplies provided under this contract are in accordance with (IAW) the terms and conditions outlined herein and conform to the manufacturer’s equipment specifications and the Performance Work Statement (PWS). Equipment to be maintained and required support services are listed on Appendix A.

SECTION 3 – CERTIFICATION OF RESPONSE

NAME OF OFFEROR’S REPRESENTATIVE TITLE

SIGNATURE DATE

Contractor is REQUIRED to sign this document and return 1 copy to issuing office. Contractor agrees to furnish and deliver all items set forth or otherwise identified above and on any additional sheets subject to the terms and conditions specified herein. Contractor is required to provide commercial product literature for all items quoted above as required/requested