Tube Chamfer Item Desc V2.pdf
PDF 114 KB Posted
- Attached to
- Tube Chamfer Federal contract opportunity
- Solicitation number
- FA812524Q0003
About this file
This memorandum outlines equipment specifications for a tube chamfering machine solicited by the Department of the Air Force under solicitation number FA812524Q0003. The machine must be able to chamfer tubes ranging from 1/4 inch to 3.15 inches in outside diameter using 480V or 120V power. Additional requirements include dimensions no greater than 4 feet by 5 feet by 7 feet, a sound level less than 85 decibels, and the ability to achieve a 30 degree internal chamfer. The specifications also list requirements for automatic clamping, variable speeds, simultaneous internal and external chamfering, included tooling such as carbide inserts and clamping jaws, safety features, and the inclusion of a frequency inverter and additional spare tooling.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment FA812524Q00030001 SF 30.pdf | ||
| Solicitation - FA812524Q0003.pdf | ||
| C22-062 Tube Chamfer Equipment - Item Description.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER
(AFMC) TINKER AIR FORCE BASE OKLAHOMA
25 October 2023
MEMORANDUM FOR RECORD
SUBJECT: Item Description, C22-062 Tube Chamfer Equipment
Reference: C22-029
1. CMXG is requesting utilization of funds for the purchase of Tube Chamfer Equipment.
2. The requested equipment item descriptions/specifications are outlined below.
• Must be able to chamfer tubes ranging from 1/4" up to 3.15" outside diameter (O.D.)
• Facility Utilities available: 480V and 120V outlet.
Machine shall be configured to run on 480V.
• No greater than 4' x 5' x 7' (LxWxH).
• Sound during operation less than 85 dBA, measured at the operator’s head level.
• Chamfer must be able to achieve 30° internally.
• Auto Clamping and Chamfering with manually feed to a Positive stop.
• Working capacity, min. 1.0” to max. 3.15” OD. Motor 3 Hp.,3 Ph., 480 volt. Variable speeds at Cutting Tool Chuck’s spindle by changing belt’s position at step pulley. Two chamfering speeds, rapid approach and infinite variable speeds during chamfering operation. I.D, O.D. chamfering and facing functions simultaneous or independent.
• Cutting Chuck complete with insert holders and carbide inserts, 1.125” O.D. x 0.105”WT
• Clamping jaw for 1.125” outside diameter (O.D.) tubing.
• Instruction Book for Safety Operation
• CE, Safety All Around Cover.
• Frequency Inverter for infinite variable speed control (installed)
• Additional Clamping Jaws, 1.0” and 1.25” O.D. tubing
• Carbide Insert (10/1 box), 1.25” O.D. x 0.065” WT
• Cutting Tool Chuck, complete set, 1.00” O.D. x 0.049” WT The Government in addition to the machine is looking for 3 sets of clamping Jaws and three dedicated cutting chucks for:
1.00”X .049, 1.125” X .105” 1.250”X .065” Frequency Inverted And a box of spare carbide inserts.
File details come from the government source that posted it. Updated .