C22-062 Tube Chamfer Equipment - Item Description.pdf
PDF 225 KB Posted
- Attached to
- Tube Chamfer Federal contract opportunity
- Solicitation number
- FA812524Q0003
About this file
This memorandum provides an item description for tube chamfer equipment being procured under solicitation number FA812524Q0003 by the Department of the Air Force Materiel Command Air Force Sustainment Center. The equipment must be able to chamfer tubes ranging from 1/4 inch to 3.5 inches in outside diameter, with a chamfer of 45 degrees plus or minus 5 degrees internally and a minimum thickness of 0.008 inches along the outer face. Additional requirements include auto clamping and chamfering, variable speeds from 1 to 3.5 horsepower motor, cutting chucks compatible with tube sizes from 1 to 1.25 inches, safety covers, and additional clamping jaws. The point of contact listed is Brett Stroud at brett.stroud.1@us.af.mil.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tube Chamfer Item Desc V2.pdf | ||
| Solicitation Amendment FA812524Q00030001 SF 30.pdf | ||
| Solicitation - FA812524Q0003.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS AIR FORCE SUSTAINMENT CENTER (AFMC)
TINKER AIR FORCE BASE OKLAHOMA
4 October 2023
MEMORANDUM FOR RECORD
SUBJECT: Item Description, C22-062 Tube Chamfer Equipment
Reference: C22-029
1. CMXG is requesting utilization of funds for the purchase of Tube Chamfer Equipment.
2. The requested equipment item descriptions/specifications are outlined below.
• Must be able to chamfer tubes ranging from 1/4" up to 3.5" outside diameter (O.D.).
• Facility Utilities available: 480V and 120V outlet. Contractor to supply 110V transformer.
• No greater than 4' x 5' x 7' (LxWxH).
• Sound during operation less than 85 dBA, measured at the operator’s head level.
• Chamfer must be able to achieve 45° +/- 5° internally.
• Chamfer must be able to achieve a minimum of 0.008" thickness along outer face (no full
45° chamfer along the tube).
• Auto Clamping and Chamfering with manually feed to a Positive stop.
• Working capacity, min. 1.0” to max. 3.5” OD. Motor 3 Hp.,3 Ph., 440 volt. Variable speeds at Cutting Tool Chuck’s spindle by changing belt’s position at step pulley. Two chamfering speeds, rapid approach and infinite variable speeds during chamfering operation. I.D, O.D. chamfering and facing functions simultaneous or independent.
• Cutting Chuck complete with insert holders and carbide inserts, 1.125” O.D. x 0.105”WT
• Clamping jaw for 1.125” outside diameter (O.D.) tubing.
• Instruction Book for Safety Operation
• CE, Safety All Around Cover.
• Frequency Inverter for infinite variable speed control, (installed)
• Additional Clamping Jaws, 1.0” and 1.25” O.D. tubing
• Carbide Insert (10/1 box), 1.25” O.D. x 0.065” WT
• Cutting Tool Chuck, complete set, 1.00” O.D. x 0.049” WT
3. Point of contact for this memorandum is Brett Stroud at (405) 736-2360, brett.stroud.1@us.af.mil.
Brett A. Stroud, GS11, DAF Program Management Specialist
OC-ALC OBCA
mailto:%20%20%20%20%20%20brett.stroud.1@us.af.mil mailto:%20%20%20%20%20%20brett.stroud.1@us.af.mil
| 2023-10-04T15:51:53-0500 | |
| STROUD.BRETT.ALLAN.1268063940 |
File details come from the government source that posted it. Updated .