APPENDIX_D_to_Post_on_FBO_for_FA8125-13-Q-0056..pdf

APPENDIX D

Special Instructions for

INSPECTION OF THE

150 lb. HALON FIRE BOTTLES

27 July 2013

Inspection of the 150 lb. Halon Bottles shall be performed as follows:

INSPECTION:

For this contract the Inspection of the 150 lb. Halon Fire Bottles requires an inspection two times per year, in (Jan and July) to ensure reliable operation. The Government technical point of contact will determine when the inspections will occur and contact the COR and Contractor to schedule each visit.

The Physical Address for the Inspections location is as below:

565 AMXS/MXDRAA

BLDG 2121 Post D-10 Tinker AFB, Ok. 73145 405-736-3534

The Contractor shall do all of the following:

Clean extinguisher to remove dirt, grease, or foreign material. Inspect the cylinder for corrosion, abrasion, dents, and condition of welded seams. If damage is found and doubt the integrity of the cylinder, it must be identified to government.

Weigh extinguisher. Total charged weight of a full extinguisher is 325 pounds ± 15 pounds.

Check date of manufacture on label (nameplate). The Fire Extinguisher Unit must be removed from service after 12 years from Date of Manufacture. If the cylinder and hose has been preciously Hydrostat Tested, remove from service if Fire Extinguisher Unit is 12 years from latest Hydrostat Testing Date.

Inspect extinguishers for pull pins, and ensure they are properly secured for freedom of movement.

Inspect gaskets, couplings, and hose for damage or deterioration.

Inspect discharge valve assembly for corrosion or damage to hose thread connection.

Visually inspect the safety disc assembly on the discharge valve for obstructions or damage.

Inspect wheels and tires. Check that tires are not worn or damaged. Inspect wheels to ensure that they are properly secured, greased, and rotate freely.

Check carriage assembly and hose rack assembly for loose nuts and bolts, frame distortion or damage. Check welds for damage or corrosion.

Install new tamper seal and record the service date on the extinguisher tag.