DID_FIRST_ARTICLE_QUAL_TEST_PLAN_AND_PRO.pdf
PDF 21 KB Posted
- Attached to
- Duct, Turbine, Aircraft Federal contract opportunity
- Solicitation number
- FA8121-24-R-0011
About this file
This document is a Data Item Description (DID) that establishes the test procedures, test equipment, and inspection criteria to be used by the contractor for first article qualification testing. The DID requires the contractor's First Article Qualification Test Plan and Procedures to include the purpose of the test, applicable documents, description of the units to be tested, step-by-step test procedures, definitions of required readings and settings, and drawings/schematics of any non-commercial test fixtures. Additionally, the plan must define the minimum performance requirements the unit under test must meet to be considered acceptable to the government.
The related federal contract opportunity is for the procurement of Duct, Turbine, Aircraft. This is a competitive solicitation issued by the Department of the Air Force Materiel Command Air Force Sustainment Center. Qualified sources must be approved prior to award in accordance with FAR 52.209-1. The government is not required to delay the contract award to review pending Source Approval Requests, so offerors are encouraged to submit requests as soon as possible.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| DD_FORM_1653_TRNSP_DATA_REPORT.pdf | ||
| AFMC158_PKG_RQMT_REPORT.pdf | ||
| DD_FORM_1423_1_CDRL1_REPORT.pdf | ||
| Solicitation - FA812124R0011.pdf | ||
| MANUFACTURE_QUAL_RQMT.pdf | ||
| LPF_QAR_FA_TEST_REPORT.pdf | ||
| DD260_FA_REPORT.pdf | ||
| DID_TEST_AND_INSPECTION_REPORT.pdf | ||
| SURPLUS_MATERIAL_EVAL.pdf | ||
| ENGINEERING_DATA_LIST.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .