Data Item Description.pdf
PDF 20 KB Posted
- Attached to
- Seat Bearings Federal contract opportunity
- Solicitation number
- FA812124Q0007
About this file
This Data Item Description establishes test procedures, equipment, and inspection criteria for first article qualification of an item procured under solicitation number FA812124Q0007 issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for seat bearings. The contractor must submit a test plan including the purpose of testing, applicable documents, a description of units to be tested, step-by-step test procedures, identification of test equipment, drawings or other materials necessary for evaluation, and minimum performance requirements constituting acceptability. The test plan format is at the contractor's discretion but must contain the specified content.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation FA812124Q0007_003.pdf | ||
| 014544610 EDL.pdf | ||
| Solicitation FA812124Q0007_002.pdf | ||
| Solicitation FA812124Q0007_001.pdf | ||
| Solicitation FA812124Q0007.pdf | ||
| 3693450_SMW_REPORT.pdf | ||
| Data Item Description_1.pdf | ||
| 3789611_TRNSPDATA_REPORT.pdf | ||
| 3789610_PKGRQMT_REPORT.pdf | ||
| 3776776_CDRL1_REPORT.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: First Article Qualification Test Plan and Procedures
Number: DI-NDTI-81307A Approval Date: 21 NOV 2006 AMSC Number: 7649 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: NS/I522 Applicable Forms: N/A
Use/relationship:
To establish test procedures, test equipment, and the inspection criteria that will be used by the contractor for first article qualification.
This Data Item Description (DID) contains the format and content preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
This DID supercedes DI-NDTI-81307.
Requirements:
1. Reference documents. None.
2. Format:
The plan shall be in the contractor’s format.
3. Content:
This test plan shall include the following:
a. Purpose of test.
b. Applicable documents.
c. Description of units to be tested.
d. Test description to include the following:
(1) Step-by-step procedures which are to be followed by the operator when performing each test.
(2) Define readings to be taken, settings to be used, and description of the test equipment, including commercial identification.
DI-NDTI-81307A
(3) Drawings, schematics, photographs, etc, of noncommercial fixtures and testers necessary for test evaluation.
e. Inspection criteria that defines the minimum performance requirements that the unit under test must meet in order to be considered acceptable to the Government. This shall include, as a minimum, worst case prime power input, worst case signal level and timing inputs, and signal level and timing outputs.
4. END OF DI-NDTI-81307A
| DATA ITEM DESCRIPTION |
| Requirements: |
File details come from the government source that posted it. Updated .