Questions_and_Answers_for_Solicitation_FA811919R0035.docx
DOCX document 14 KB Posted
- Attached to
- Solicitation Repair Services of ATCALS Circuit Card Assembly(s), Power Supply, and Receiver Transmitter
- Solicitation number
- FA8119-19-R-0035
About this file
Please see the attached documentation regarding submitted questions. The answers are listed on the document as well.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| PWS_Rev_1.0_91719.docx | DOCX document | |
| FA811919R0035.pdf | ||
| 2796321_TRNSPDATA_REPORT.pdf | ||
| 2835953_PWS.pdf | ||
| 2691528_CDRL1_REPORT.pdf | ||
| 2796323_PKGRQMT_REPORT.pdf | ||
| 2835954_GFP_ATTACH_(1).pdf | ||
| Solicitaion_FA811919R0035.pdf | ||
| Pre-solicitation_FA8119-19-R-0035.doc | DOC document | |
| Performance_Work_Statement_(PWS).docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Questions and Answers for Solicitation FA8119-19-R-0035 Q 1. Solicitation lists AS9100 for each item. What if contractor is not AS9100 compliant and will not become compliant for this program. Can you please remove AS9100.
A1. The contractor needs to have either AS9100 or ISO9001 compliance or equivalent.
Q 2. Solicitation: 5820‐01‐608‐9187IM, 012106‐0001, PACRN: PAJ AFMC 158 form: PACRN: AAE (no packaging available) – please confirm contractor selected packaging is Acceptable.
A2. Packaging waivers must be approved by 406 SCMS/GULAA verlisher.strain@us.af.mil PWS Questions and Answers:
Q 1. Section 1.3.5.1 Is the contractor’s standard repair documentation an acceptable contractor equivalent to DD form 1574?
A1. See the above mentioned paragraph below:
1.3.5.1. The Contractor shall insure that the appropriate tag is attached to each serviceable end-item generated.
1. Tested OK (Serviceable) tag is DD Form 1574/1574-1 (or contractor equivalent) (Yellow).
1. Unserviceable (repairable) tag is DD Form 1577-2/1577-3 (or contractor equivalent) (Green).
1. Unserviceable (condemned) tag is DD Form 1577/1577-1 (or contractor equivalent) (Red).
Q 2. Section 1.3.6 Please remove
A2. Cannot remove
Q 3. Section 1.9 Please remove
A3. Engineering confirmed that this section can be removed as “these parts do not have nuclear hardness requirements.”
Q 4. Section 1.10 Please confirm that the Contractor’s existing ISO 9001 compliant configuration management program is sufficient.
A4. Yes Q5. Section 1.13.1 All of the subcomponents to be repaired contain lead. Is it acceptable to affix a single label to each item to satisfy J‐STD‐609?
A5. Per engineering, According to J-STD-609, all component should be labeled, so affixing a labeled to each item will satisfy this requirement.
Q 6. CDRL A001 and 1.4.1 Table‐Line 1‐CAVAF end item reporting‐ can you please change daily to as required.
A6. Done.
File details come from the government source that posted it.