IUIDTOChanges659.pdf

Changes to T.O. 16C1-12-14-3

Under Paragraph 1.4, Inspection, add new sub-paragraph g.:

g. IUID. Inspect the identification (plate/label/other marking) for the Unique Identification

(UID) 2D marking IAW Appendix A.

Page 2-4, Figure 2-1, add new Index 22:

Index p/n CAGE DESCRIPTION UPA

22 200945069-501 98748 UID Label 1

Add New Appendix, Page A-1:

APPENDIX A

UNIQUE IDENTIFICATION (UID) SUPPORTING INFORMATION

A.1 UID SUPPORTING INFORMATION.

- If present, visually inspect UID Nameplate for damage to the 2D symbol, and by using a hand-held electronic reader for readability - Reference T.O. 00-25-260.

- If UID Nameplate is not present or damaged, manufacture new label and install as shown in

Table A-1.

- Do not cover any existing markings. Reference T.O. 00-25-260.

- CAGE is that of the activity responsible for guaranteeing uniqueness of the sequencing code.

- For additional information, reference MIL-STD-130 and T.O. 00-25-260.

A.1.1 After attaching UID Nameplate, edge seal and overcoat nameplate with Humiseal 1A20 per MIL-I-46058, type UR, by spraying or by brush to a thickness of 2 – 3 mils in accordance with the manufacturer’s instructions.

Table A-1. Item Unique Identification (IUID) Required Information

Part Number Noun UID Label

Location:

UID Label Part number

Surface Preparation

Application/ Verification

69-28001-

Nose Gear Door Operated Rod Damper Assembly

Figure A-1.

If there are pre-existing ink markings, apply to opposite side of rod end.

200945069-501, Dim. “A” = 1.0”, Dim. “B” = 1.0”

REF:

T.O. 00-25-260 Pre-marking Activities

REF:

T.O. 00-25-