DI-QCIC-81891-T-ATR-Tailored.pdf

DATA ITEM DESCRIPTION

Title: ACCEPTANCE TEST REPORT (ATR) Number: DI-QCIC-81891 Approval Date: 20130118 AMSC Number: N9313 Limitation: N/A DTIC Applicable: N/A GIDEP Applicable: N/A Office of Primary Responsibility: AS/PMA251 Applicable Forms: N/A

Use/relationship:

The ATR contains the results of the qualification tests performed by the contractor to demonstrate that the system conforms to the performance specifications, work authorization document, or contract requirements.

This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).

Requirements:

1. Format. Contractor’s format is acceptable.

2. Content. The ATR shall contain the following:

a. Test article identification and full description of test specimens utilized, including any deviations for the configuration specified in the applicable test plan.

b. Date and location of test or evaluation.

c. The operator who conducted the test.

d. Results obtained, including specific identification and discussion of objectives demonstrated satisfactorily and those not demonstrated satisfactorily.

e. Contractor’s conclusions, corrective action anticipated, recommendation to correct. deficiencies, and suggested improvements based on evaluation of the test.

f. All analysis and supporting data.

g. All data sheets.

3. End of DI-QCIC-81891.

Source: https://assist.dla.mil -- Downloaded: 2015-07-10T15:59Z Check the source to verify that this is the current version before use.

Tailoring Requirement for Acceptance Test Report (ATR)

DI‐QCIC‐81891

TITLE: ACCEPTANCE TEST REPORT (Tailored) Number: DI‐QCIC‐81891

Use/relationship: {Replace with} The ATR contains the End Item Final Acceptance Test performed by the OEM.

This Data Item Description (DID) contains format, content, and intended use information for the data product resulting from the work task described in the Statement of Work (SOW).

2. Content {Replace with} 2. Content. The ATR shall contain the following:

a. OEM Name, Date, Location, and Test Stand Model & Number

b. End Item Serial Number (S/N) and Part Number (P/N)

c. Results of End Item Final Test (All test data sheets)

END OF DI‐QCIC‐81891‐T