Attachment-1-PWS-DRAFT.docx

PERFORMANCE WORK STATEMENT (PWS)

For

Contract Field Team Program at

Tinker AFB, Oklahoma

PREPARATION DATE: TBD

REVISION NUMBER:

DATE: TBD

FOR OFFICIAL USE ONLY – SOURCE SELECTION INFORMATION SEE FAR 3.104

PREPARING ORGANIZATION: AFSC/PZIY

1.0 INTRODUCTION

This performance work statement (PWS) establishes the requirement for Contractor services in support of the Contract Field Teams (CFT) Program. CFT supports multiple customers to provide timely and high quality augmentation for fielded active weapon system maintenance worldwide.

2.0 SCOPE

The CFT Program Management Office (PMO) is responsible for supporting requirements generated by the Department of Defense and other federal agencies to provide a flexible rapid deployment capability and to field supplemental skilled technicians on site anywhere in the world in support of the Government's war readiness and posture planning needs. These contract field teams perform modification, maintenance, inspection and repair of active systems in the US Government inventory, such as aircraft; vehicles; aerospace equipment; missile systems; subsystems such as engines, communications and cryptologic equipment; and ground support equipment. Efforts will include on-site Organizational, Intermediate/Field, and Depot/Sustainment level maintenance support at customer locations both in the continental United States (CONUS), and outside the continental United States (OCONUS). This effort may include approved foreign military sales (FMS) support (with an approved FMS case number and Letter of Agreement between countries). All weapon systems supported under this contract will be non-commercial and must have Government-owned technical data. These requirements will not include personal services or inherently governmental functions. The objectives and requirements identified within this PWS are described in general terms. Each task order will specifically address applicable task order requirements, scheduling, task order options, and performance criteria.

3.0 GENERAL REQUIREMENTS

3.1 The Contractor shall adhere to the latest versions of the following documents in accordance with the Performance Requirements and Special Requirements sections of this PWS:

TECHNICAL REFERENCES TITLE

Note: This list is not meant to be exhaustive or inclusive of all that may be required, referenced, or otherwise identified within a given task order.

4.0 PERFORMANCE REQUIREMENTS

4.1 Program Management & Reporting: The contractor shall provide a management structure that enables contractor personnel to effectively perform the roles and responsibilities associated with the execution of task order requirements. The contractor shall provide a management structure that ensures employees are present and engaged in appropriate tasks as identified in each individual task order PWS.

4.1.1 The Contractor shall effectively track, monitor, manage, and report individual task order costs down to the contract line item number (CLIN) level. The contractor shall submit a Contract Funds Status Report IAW CDRL A006 and 6.5.

4.2 Contractor Personnel: The Contractor shall provide all qualified personnel and common hand tools required for maintenance at all sites within CONUS or OCONUS as specified in individual task orders. The Contractor shall be responsible for the selection, recruitment, hiring, assignment of duties, and reassignment of duties, transfer, supervision, management, control, and termination of Contractor employees in performance of CFT requirements. Contractor personnel are employees of the Contractor and under its administrative control and supervision. The Contractor, through its personnel, shall perform the tasks prescribed herein, or in task orders issued hereunder, IAW the basic contract PWS and task order PWS, technical manuals, technical orders, drawings, work orders, or other technical data contained in or referenced by the contract, task order, contract modifications, and addendums. The Contractor shall accommodate rapid response and deployment to any operational Government location worldwide (See H-3 basic contract clause for rapid response expectations). The response shall include, but may not be limited to, passports, visas, immunizations, and security/country clearances as required by the individual task order PWS. The Contractor and its employees shall not supervise, direct or control the activities of Government personnel or the employees of any other contractor. The Government will not exercise any supervision or control over the Contractor’s employees in their performance of contractual services under this contract. The Contractor is accountable to the Government for the actions of its personnel. The Contractor shall minimize the impact of turnover for each skill on every task order and shall backfill any vacancy that occurs after task order award within 30 calendar days or as specified in task order PWS.

4.2.1 Transition: Fully executed Contractor Transition Plan for all Task Orders: Transition is defined as the time in days from task order award until the last date prior to the start of the specified start date in the task order period of performance (PoP). Task order Period of Performance start is defined as the first day of hands-on labor performance and the day after the transition period ends. To achieve the required team complement as specified in the individual task order PWS by day 1 of task order PoP start, the Contractor shall provide a time-phased transition plan, CDRL A007, IAW 6.6 and the applicable task order PWS. The Contractor shall provide a transition execution status report, CDRL A008, as specified in 6.7. The contractor shall execute each transition within the contractor specified timelines, goals, etc., as indicated in CDRL A007. Qualified personnel shall be determined qualified by the Contractor prior to the start of their labor performance. The contractor shall be able to meet a transition timeframe of no less than seven (7) calendar days while minimizing disruption during the transition period and maintaining cost and schedule.

4.2.1.1 In order to meet the minimum standard for transition at the basic contract level, the contractor must fully execute all transitions within the contractor specified goals identified in each task order CDRL A007. The metric will be measured on the contractor’s ability to meet all contractor specified timelines as reported in each task order CDRL A008.

4.2.2 Firm-Fixed-Price Minimum Team Complement (FFP MTC): Firm-Fixed-Price (FFP) Minimum Team Complement (MTC) consistently met for all applicable Task Orders: The FFP MTC is defined as the required minimum amount of staffing necessary for effective performance on each task order. The government will solely determine the FFP MTC as stated in clause H-1 of the basic contract. The Contractor shall ensure the FFP MTC specified in any applicable task order PWS is maintained throughout each task order PoP. The FFP MTC will be measured against the TOTAL number of skills reported on the Contractor Monthly Performance Evaluation, CFT Form 104, for that task order, not against any particular full time equivalent (FTE) discrepancy. If backfill happens for any FFP MTC FTE skill that is reported vacant at any time during the reported month, it will not be counted against the Contractor unless it affects the billable FFP MTC total required per the task order PWS.

4.2.2.1 The minimum standard for FFP MTC measured against the basic contract shall be met when the FFP MTCs for all task orders are fully manned on day 1 of task order PoP and when no task order with a FFP MTC discrepancy in any given month has a repeated discrepancy for the same task order in consecutive months. Measurements of the FFP MTC being met by day 1 of task order PoP will only apply when the award is made 30 days prior to PoP start OR if the task order PWS requires a set required transition time.

4.2.3 Site Supervision: The contractor shall staff site supervision at each site IAW each task order PWS and basic contract clause H-2.

4.2.3.1 The minimum standard for site supervision measured against the basic contract shall be met when site supervision for all task orders is on-site on day 1 of task order PoP and when no task order has a supervisory absence/vacancy of longer than 30 calendar days.

4.3 Quality: The Contractor shall develop and utilize a quality system that complies with the requirements of the latest version of Aerospace Standard (AS) 9100 at the time of basic contract award. The contractor shall utilize this system in the performance of the contract.

4.3.1 Acceptable Quality Control Plan (QCP) for all Task Orders: The Contractor shall ensure quality service is maintained throughout the life of the contract, and shall prepare and implement a quality control plan (QCP), CDRL A009, Management Plan: Quality Control Plan, as required for each individual task order IAW 6.8. The QCP shall reflect the Contractor’s overall approach to quality, internal controls and establishment of procedures for evaluating each of the major service areas (who, method, how often), reporting to the Government, resolving deficiencies, identifying potential improvements, documenting quality control inspections and any corrective actions taken, and maintaining quality control documentation.

4.3.1.1 In order to meet the minimum standard for submission of QCPs at the basic contract level, the contractor shall ensure all task order QCPs submitted to the government QAR are deemed compliant within 30 calendar days after the start of each task order PoP.

4.3.2 The Contractor shall produce AS9100 compliant procedures written to address corporate level and task order requirements, as well as provisions for the addition of local operating instructions (LOIs) to meet site-specific requirements of task order PWSs. In order to achieve consistent and predictable quality performance, the Contractor shall utilize the following:

4.3.2.1 Standard Operating Procedures (SOPs) and Local Operating Instructions (LOIs): Acceptable Local Operating Instructions (LOIs) for all Task Orders: SOPs are the Contractor’s internal policies and detailed procedures, to include quality procedures, which provide the guidance and instructions for CFT activities. These procedures will be reviewed by the Defense Contract Management Agency (DCMA) Contract Management Office (CMO) for compliance against the basic contract, and by the contracting officer representative (COR) or QAR for any applicable task order. The development/maintenance of these procedures are independent from the requirements for flight operating procedures (FOPs) and ground operating procedures (GOPs, see paragraph 4.4). DFARS clause 252.228-7001 shall govern in case of any conflict with these operational procedures. The Contractor shall ensure the SOP includes the relationship between job descriptions to those skill classifications contained in the proposal/contract. After basic contract award, the Contractor shall submit SOPs, CDRL A001, to DCMA CMO IAW 6.2. In addition, for each task order awarded, the Contractor shall submit SOPs, CDRL A001, to the COR/QAR IAW 6.9. The Contractor’s site supervisor/lead person may need to develop LOIs to supplement SOPs that do not specifically describe the process being performed at the site. If applicable, the contractor shall submit LOIs, CDRL A010, IAW 6.10. After development, the site QAR will be responsible for reviewing all LOIs relative to quality for compliance IAW the standards of AS9100. Any quality related LOIs are separate and distinct from aviation LOIs listed at 4.4.

4.3.2.1.1 In order to meet the minimum standard for submission of LOIs at the basic contract level, the contractor shall ensure all task order LOIs submitted to the government QAR are deemed compliant within 30 calendar days of each task order award.

4.3.2.2 Workbook/Maintenance Forms: When applicable to the work tasks, the Contractor shall develop a workbook that will contain specific “step-by-step” instructions for accomplishing the work in accordance with all technical data. It shall include detailed instructions for component removal, in-process inspections, and reinstallation, as well as all appropriate warning/caution notes. When applicable, workbooks shall be submitted to the QAR for a compliance review and should be developed during the transition period. Workbooks shall be presented to the QAR at least 7 calendar days prior to the start of task order PoP to allow time for review. The Contractor shall provide plan for implementation of workbooks and status of the development for any required workbooks in the transition plan and transition execution report required at 4.2.1. When a workbook is not applicable, the Contractor shall document the tasks IAW referenced technical publications, SOPs and/or locally required maintenance forms.

4.3.2.3 Inspection: The Contractor shall be required to physically inspect and evaluate all work tasks accomplished to assure they conform to applicable work orders, technical orders, drawings, or other technical data as provided by the government and required by the task order PWS prior to presentation to the Government for acceptance. When a publication provided by the Government is subsequently revised, supplemented, replaced or rescinded, the Contractor, upon notification or receipt of it, shall comply. The Contractor shall maintain inspection records documenting inspection results. These shall be traceable to the specific work task and inspection process used as well as providing evidence that the work task being inspected conforms to all technical requirements. Defects discovered by the Contractor shall be documented, and corrective action shall be taken through their corrective action system. All Contractor corrective action shall include location, nature of defects, and the specific characteristics of the defect and corrective actions taken. Records shall also include the inspector’s acceptance of corrected deficiencies. The Contractor’s final inspection stamp/signature shall constitute their acceptance of the task/item and must be completed prior to submission to the Government for final inspection and acceptance.

4.4 Aviation Maintenance: When the scope of work involves the repair, maintenance, modification, or overhaul of aircraft, the Contractor shall develop specific written flight operations procedures (FOPs, if applicable) and ground operations procedures (GOPs) for all flight/ground operations, as well as aviation-specific LOIs if referenced in, or included as part of the FOP/GOP, IAW DCMAI 8210.1C and submit to the Ground/Government Flight Representative (G/GFR) [or government flight representative (GFR), if assigned] IAW CDRL A011 at 6.11 and each individual task order PWS. Contractors shall not begin flight or ground operations until the procedures have been approved in writing by the G/GFR. FOPs/GOPs/aviation LOIs are separate and distinct from all other procedures/LOIs required by this contract.

4.4.1 Acceptable FOPs/GOPs for all aviation Task Orders: In order to meet the minimum standard for submission of FOPs/GOPs at the basic contract level, the contractor shall ensure all task order FOPs/GOPs submitted to the government G/GFR are approved in writing no later than day 1 of the start of each task order PoP.

4.5 Voucher Submission: The Contractor shall submit public vouchers for cost efforts to the Defense Contract Audit Agency (DCAA). Vouchers shall be submitted in Wide Area Workflow (WAWF). Invoices for fixed price efforts, after acceptance by the Government, shall be submitted in WAWF to Defense Finance and Accounting Service for payment with a copy to DCMA.

4.6 SB reporting/measurement (Large Business only): The contractor shall submit a Small Business Participation Plan to support their Subcontracting Plan IAW basic contract clause H-17 and CDRL A002 at 6.3.

4.7 Task Order Performance and Schedule Metrics: The Contractor shall perform tasks that will be measured IAW performance and schedule metric criteria specified in individual task order PWSs. Performance and schedule metrics will have criteria assigned for meets standard or 0, exceeds standard or +1, and does not meet standard or -1. A performance metric is any type of metric that doesn’t measure the time it takes to get a task done. Schedule metric requirements will be specific to the time it takes to complete the associated tasks and may be measured as Turn Around Time (TAT), man-hours, Time Compliance Technical Order (TCTO) hours, job standard or any other method to gage timeliness of completed tasks in a specified amount of time. Once measured, these metrics will be used to arrive at a monthly score for the Contractor based on whether they did not meet, met, or exceeded the stated goals. The performance and schedule metric scores for all of a Contractor’s task orders will be rolled up into an overall performance score and schedule score for the basic contract, which will be used in the evaluation of performance against the basic contract. Task order metrics shall include, but may not be limited to: timeliness, quality, safety, management responsiveness, inspection reject rates, turnover/backfill ratios, and other areas as cited on the individual task order PWS.

4.8 Performance Summary: Contractor performance on the basic contract will be measured by a combination of the thresholds identified in the service summary below, as well as individual performance requirements specified on the task order PWSs. This performance data will be collected from the CFT Form 104, as well as from DCMA and the CDRLs specified in 6.0. Circumstances or external influences beyond the control of the Contractor that impact the ability of the Contractor to meet performance standards will not affect Contractor performance measurements. The Government will determine which circumstances or external influences are beyond the Contractor’s control.

4.9 Services Summary

(Surveillance Method)

100% Inspection

100% Inspection

100% Inspection

100% Inspection

* This services summary is not inclusive of individual task order performance and schedule metrics (see IAW 4.8). The contractor shall also be measured against the services summary for each individual task order PWS.

5.0 SPECIAL REQUIREMENTS

5.1 Safety: The Contractor shall comply with safety provisions as directed by the individual task order PWS and IAW the safety appendix, Appendix C. The Contractor shall be responsible for the safety and accountability of all its employees and shall provide personal protective equipment for team members requiring it. The Contractor shall complete all work tasks IAW contract terms and conditions while complying with the safety program, host base safety requirements, and Occupational Safety and Health Administration (OSHA) Public Law 91-596.

5.2 Security Requirements: The Contractor shall comply with all applicable security requirements, abide by direction given by Military Police or other security personnel, and adhere to installation traffic laws as defined in the individual task order PWS. Requirements may include a DD Form 254, DoD Contract Security Classification Specification. Examples of clearance levels include secret and top secret. Contract security shall be in accordance with the DoD 5220.22-M, National Industrial Security Program, and DoD 5200.22-R, Industrial Security Regulation, or latest guidance. All Contractors are required to have a Common Access Card (CAC) and shall be required to pass the equivalent of a trustworthy National Agency Check plus Written Inquiries with Credit Check (NACI), IAW DTM-08-003 or latest guidance, at no additional cost to the government, prior to being allowed to work under any task order PWS. The Contractor shall be responsible for obtaining the necessary admittance privileges to the applicable base/place of performance. The Contractor shall be required to coordinate with the appropriate base security officials for issuance of employee identification badges, if applicable, prior to starting work.

5.2.1 Employee Protections: IAW individual task order PWS, personnel who are citizens of the United States and employed by the Contractor hereunder and sent to Outside Continental United States (OCONUS) locations shall be accredited to the United States Air Force, Army, Navy or Marines with a recognized status under the Hague regulations and the Geneva Convention. The Contractor shall be given proper credentials and identification cards, shall wear a uniform when prescribed by the Theater Commander, shall be subject to appropriate recognition under the rules of war, and shall be subject to such regulations as have been or may hereafter be issued by the United States Air Force, Army, Navy or Marines in foreign theaters of operation. Upon termination of services of any employee, the Contractor shall immediately upon occurrence turn in all Government credentials issued to that employee.

5.3 Government Furnished Equipment, Facilities and Services: For every task order defined permanent location, the Government will provide necessary space, special tooling, all support equipment (to include Fall Protection IAW OSHA General Industry Standard 29 CFR Part 1910), office space, required office equipment and supplies, and access to telephone/fax machine for official business calls in addition to logistics support as outlined in logistics support clauses of the basic contract. Direct parts and materials shall be purchased using the appropriate reimbursable CLIN after approval from the DCMA administrative contracting officer (ACO) as outlined in the applicable basic contract clause.

5.3.1 Government Furnished Property (GFP): GFP will be provided to the Contractor as required by the individual task order PWS. Any GFP will be provided as an Appendix B to the task order. If an Appendix B is provided with the task order requirements, the Contractor, in conjunction with the Contracting Officer Representative (COR) and upon issuance of each individual task order awarded hereunder, shall conduct an initial inventory of all GFP. In addition, the Contractor shall conduct either a yearly inventory of all GFP or shall conduct an inventory of all GFP at the completion of each task order, whichever comes first. Data shall be submitted IAW CDRL A012 at 6.12. Control of GFP shall be in accordance with FAR 52.245-1, 2 and 9.

5.3.2 Contractor Transportation: When contractor employees are on temporary duty (TDY) status, Government provided transportation may be authorized, provided it is specified on the individual task order PWS and approved by the contracting officer. Government transportation shall be limited to the duration of the TDY in accordance with the Joint Travel Regulations (JTR), for period of performance and location. Use of transportation will be restricted for the conduct of official business and transportation of team personnel to worksite from quarters and return. Costs incurred by contractor personnel on official company business are allowable, subject to the limitations contained in FAR 31.205-46 – Travel Costs. Costs for transportation may be based on mileage rates, actual costs incurred, or on a combination thereof, provided the method used results in a reasonable charge.

5.3.3 In the continental United States (CONUS), contractor’s personnel will not be furnished Government quarters, messing or other forms of logistic support except for emergency medical care (resuscitative and stabilization care only), unless specifically authorized in the task order or letter of identification.

5.3.4 OCONUS Logistics Support: The Government may make available within the overseas theaters, subject to the individual capability limitations of the bases therein and the approval of the respective Theater/Base Commanders, the following items of logistics support to contractor personnel: quarters (adequate government quarters may be considered a tent), messing (including commissary), communications, banking, postal service, laundry, dry cleaning, on-base recreation, vehicle registration, base service station, base exchange, club privileges, medical and dental facilities. There may be specific limitations with regards to US Territories and possessions. Secretaries of the respective Military Department (for US territories and Possessions, the installation commander concerned if delegated) may grant deviations to specifically authorize limited commissary privileges to firms under contract to the Department of Defense provided certain criteria are met. Please reference DoD 1330.17-R, "Armed Services Commissary Regulations, Enclosure 2;" DoD Instruction 1330.21, "Armed Services Exchange Regulations, Enclosure 6;" and DoD Instruction 1000.13, "Identification (ID) Cards for Members of the Uniformed Services, Their Dependents, and Other Eligible Individuals,'' for the latest guidance on access privileges. The task order PWS will specify any OCONUS logistics support that will be provided by the government. Additionally, PWS para 5.15 will specify any country specific entry requirements that would be required in order to gain access to government bases/facilities.

5.4 Timeline/Work Schedules: Individual task order requirements will be specified in the task order PWS. Normal Government workdays include Monday through Friday, except for Contractor sick leave and vacation days, and the following United States (US) federal holidays:

New Year’s Day Martin Luther King Jr’s Birthday President’s Day Memorial Day Independence Day Labor Day Columbus Day Veteran’s Day Thanksgiving Day Christmas Day Good Friday: Alaska only

Individual task order requirements will be specified in the task order PWS with regards to the following:

5.4.1 Down Days/Weather Days: The contractor may be required to work all local safety, family, and down days. There may be scheduled down days or safety days such as: days after holiday, goal days, and other similar events where the contractor doesn’t have access to base facilities. Every effort will be made to provide contractor access during down days; however access is not guaranteed. If contractor operations need to be suspended due to inclement weather the contractor will be notified by the on-site COR, QAR, or installation weather warning system. Rescheduling of down/weather days will be coordinated through the COR.

5.4.2 Rescheduling: If there are lost hours, the COR may reschedule tasks to a later date.

5.4.3 Surge/Emergency Operations: Contractor may provide maintenance services in support of natural disasters and other unique situations (e.g., stranded aircraft rescue, national security support, etc.). The Government will make every effort to provide advance notice of emergent requirements. Should the Contractor actually be required to support the function (i.e., if the Contractor is actually called to duty), the Contractor shall be reimbursed for such services when outside normal working hours and if they exceed expected workload.

5.4.4 Weekends/Holidays

5.4.5 Night Operations

5.4.6 Off-site operations: Maintenance performed at any locations other than those defined as the permanent locations in Section 2 of the task order PWS, will be considered TDY locations.

5.5 Travel: The Contractor shall be required to travel. TDY shall be performed as required by individual task order requirements and will be specified in the task order PWS, only after coordination with the COR prior to approval and authorization by the ACO or PCO. The Contractor shall be responsible for making arrangements for all airfare, car rental, lodging, and subsistence required. If passports/work visas are required for travel, this will be specified in the task order PWS.

5.6 Overtime, Surge and Over and above work: Overtime, surge and over & above are defined in and shall be worked IAW basic contract clause H-15. The Contractor is advised that a shortage of personnel which results in overtime or weekend work to accomplish tasks not considered a surge emergency requirement will NOT be entitled to overtime under the over and above CLIN. If manning levels must be decreased due to unanticipated workload reduction, the task order may be de-scoped as a result of government/Contractor negotiations.

5.7 Training: The Contractor shall provide all required training to its employees. Exceptions to this will be specified in the task order PWS. The Contractor shall provide copies of certification to the task order COR when requested IAW the individual task order PWS.

5.8 Physicals:

5.8.1 FFP: The Contractor shall be responsible to pay for and maintain any and all physicals for FFP work. This includes all OSHA physicals and OSHA training requirements. This is to include all yearly medical OSHA requirements. This includes, but is not limited to, OSHA mandated physicals and trainings such as Cadmium, EXIT Cadmium, DOT Exam, Respirator (including all Fit Testing Procedures), Hazwoper, breathing tests, and Audiograms. Additionally, general physical for persons operating powered equipment or government motorized equipment, Class 1 & 2 flight physicals for personnel performing flight duties and fitness for duty physicals are the responsibility of the contractor. The Contractor shall be responsible for estimating physical and training costs up-front based on the requirements defined in the individual task order PWS. Physicals associated with FFP work shall not be a direct cost to the government and will not be reimbursed through the CAP/CAS CLIN.

5.8.2 Time & Materials (T&M): OSHA required physicals in relation to T&M work will be reimbursed through the Material/Non-Material CLIN IAW Basic Contract Clause H-13. Contractors shall be responsible to pay for any and all standard “fit-to-work” or “pre-employment” type physicals in relation to T&M work.

5.9 Data Rights: IAW the task order PWS, the Contractor shall be provided access to information required to accomplish assigned tasks commensurate with security clearance and on a need to know basis. During any task order PoP, all data pertaining to the task order shall be returned to the Government upon task order expiration. The Contractor shall not retain classified or unclassified material generated or received under this contract and any resultant task order after the task order ends without approval of the appropriate office of primary responsibility. The Government has unlimited rights to all deliverables developed under this contract and any resultant task order. The Government will retain custody of all records associated with Contractor deliverables and will have exclusive control of all records associated in the distribution of all written deliverables.

5.9.1 Documentation: Documentation, in any media, provided by the Government shall remain the sole property of the U.S. Government. Documentation generated by the Contractor in support of this contract, in any media, shall remain the sole property of the U.S. Government. The Contractor shall not use or disclose any documentation for any purpose or in any manner not specifically authorized or required by the CFT contract and the Individual task order PWS.

Documentation includes, but is not limited to: software, data, records, files, documents, work papers, logs, materials, products, and services.

Documentation also includes, but is not limited to, requirements information from customers, design specifications, notes, end-user manuals, flowcharts, diagrams, and prototypes. Products and services include, but are not limited to, those that are innovations, or were learned as part of normal operational processes, or those not listed as a requirement but the Contractor saw and filled a need based on Government contracting officer (CO) approval at no additional cost to the Government.

Documentation shall be maintained, inventoried, and disposed of in accordance with the applicable records management regulations AFI 33-322, AFMAN 33-363, and AFI 33-364 (in their entirety) and written coordination with the Government COR.

All documentation returned to the Government COR during contract performance, at contract completion or termination shall be in the English language, readable, and in a readily retrievable format, which requires no additional software or tools to read and to retrieve beyond those already installed on the affected U.S. Government computers.

5.10 Mission Essential Services: The Contractor shall prepare for the continuation of essential DOD services during crisis IAW Defense Federal Acquisition Regulation Supplement (DFARS) SUBPART 252.237.7023 “Continuation of Essential Contractor Services.” In a state of emergency, if the Government deems necessary, the Contractor shall continue to provide all services necessary to ensure mission accomplishment. IAW the task order PWS, the Contractor shall provide a written plan IAW DFARS 252.237-7024, “Notice of Continuation of Essential Contractor Services”.

5.11 Green Procurement Program (GPP): In order to be compliant with E.O. 13423 and FAR 23.404(b), the Contractor shall purchase products and services (when CAP/CAS is authorized) that meet GPP guidelines unless they are not available:

1. Competitively within a reasonable period of time;

2. At reasonable prices, or;

3. To meet reasonable performance standards in specification. A written determination by technical or requirements personnel of the performance standard reasonableness must be included with the justification.

NOTE: The DOD GPP was established to implement Executive Order (E.O.) 13423, “Strengthening Federal Environmental, Energy, and Transportation Management”, that requires federal agencies to use sustainable environmental practices in the acquisition of goods and services. The purpose of GPP is to enhance and sustain mission readiness through cost effective acquisition that achieves compliance and reduces resource consumption and solid and hazardous waste generation. Green procurement includes the acquisition of:

· Recycled content products

· Environmentally preferable products and services

· Bio-based products, energy- and water-efficient products,

· Alternate fuel vehicles and alternative fuels,

· Products using renewable energy, and

· Alternatives to hazardous or toxic chemicals

The GPP does not authorize the violation of Service Technical Order/Manual or Regulatory requirements to use specified materials. Useful information can be found at:

· U.S. EPA Comprehensive Procurement Guidelines published at www.epa.gov/cpg/products.htm

· USDA Bio-based product listings published at http://www.dm.usda.gov/procurement/programs/biopreferred.htm

· Energy Star® product listings published at www.energystar.gov/products

· FEMP Low Standby Power product listings published at http://oahu.lbl.gov

5.12 Strike Plan: The Contractor is expected to continue performance in the event of a labor strike, in accordance with FAR 22.101.2(b). If Contractor employees performing on a task order are covered under a collective bargaining agreement (CBA), the Contractor shall provide a Strike Plan IAW CDRL A013 and 6.13. Individual task order requirements will be specified in the task order PWS. The Strike Plan shall address how the Contractor shall continue to provide contract services in the event of a strike or labor dispute by represented employees and address measures necessary to ensure the security of government property and communications. The plan shall also address any other criteria the Contractor believes to be critical to continuance of the contracted services.

The Contractor shall submit either a Strike Plan or a Contractor Labor Dispute Plan IAW the individual task order PWS.

5.13 Contractor Labor Dispute Plan/Unrepresented Employees: The Contractor is expected to continue performance in the event of a labor dispute involving Contractor employees that are not represented by a union, and therefore are not covered under a CBA. The Contractor shall provide a Labor Dispute Plan IAW the individual task order PWS, CDRL A014 and 6.14. The Labor Dispute Plan shall address how the Contractor shall continue to provide contract services in the event of a labor dispute by unrepresented employees and address measures necessary to ensure the security of government property and communications. The plan shall also address any other criteria the Contractor believes to be critical to continuance of the contracted services. This plan shall be reviewed on an annual basis by the Contractor and the COR.

The Contractor shall submit either a Strike Plan or a Contractor Labor Dispute Plan IAW the individual task order PWS.

5.14 Nuclear Weapons Related Materiel (NWRM) Standard Contract Requirements: Individual task order requirements will be specified in the task order PWS.

5.15 Distinctive Requirements for OCONUS Task Orders: Individual task order requirements will be specified in the task order PWS [Technical Expert Status Accreditation (TESA), Status of Forces Agreement (SOFA), etc.].

5.16 Contractor Vehicle/Equipment Operation: Contractors shall comply with DOD 4500.36-R which states:

“Contracts and agreements will require that operators comply with licensing requirements of the State and local motor vehicle laws. DoD Contractor employees shall not be issued Optional Form (OF) 346, "U.S. Government Motor Vehicle Operator's Identification Card." DoD Contractor employees assigned to operate either government owned/leased equipment in performance of their contract shall be certified, by the Contractor and at the Contractor’s expense, as being fully qualified to operate the vehicles/equipment to which they are assigned. The prime Contractor shall document all operator qualifications. The Contractor shall provide a locally produced Motor Vehicle Operator's Identification Card for all employees that require a motor vehicle license and that have received proper training to operate a motor vehicle. This license shall at a minimum have the following information, Name, Sex, DOB, Height, Weight, Hair Color, Eye Color, Date Issued, Date Expires, Location Issued, Signature Block for Verifying Government Official, License tracking number, List of Vehicle authorized to operate. The use of "OF 346" is not authorized to fill this requirement. All records shall be maintained by the Contractor and made available to the COR or Government Flight Representative during annual inspections or whenever requested.

Individual task order requirements relative to what equipment requires certification to operate will be specified in the task order PWS, if applicable. A CDRL may be required listing all contractor personnel who operate Government owned/leased equipment and will be specified in the task order PWS, if applicable.

5.17 Contractor Manpower Reporting: The Contractor shall report ALL Contractor labor hours (including sub-Contractor labor hours) required for performance of services provided under this contract for the United States Air Force via a secure data collection site to support Air Force compliance with Section 8108 of Public Law 112-10 of the Department of Defense and Full-Year Continuing Appropriations Act, 2011. The Contractor is required to completely fill in all required data fields in the electronic Contractor Manpower Reporting Application (eCMRA) located via http://www.ecmra.mil.

Reporting inputs will be for the labor executed during the period of performance for each Government fiscal year (FY), which runs 1 October through 30 September. While inputs may be reported any time during the FY, all data shall be reported no later than 31 October of each calendar year. Contractors may direct questions to the CMRA help desk.

Uses and Safeguarding of Information: Information from the secure web site is considered to be proprietary in nature when the contract number and Contractor identity are associated with the direct labor hours and direct labor dollars. At no time will any data be released to the public with the Contractor name and contract number associated with the data.

User Manuals: Data for Air Force service requirements must be input at the Air Force CMRA link. However, user manuals for government personnel and Contractors are available at the Army CMRA link at http://www.ecmra.mil.

The Unit Identification Code(s) (UIC) for each site(s) on a task order will be specified by the individual task order PWS.

5.18 Reporting requirements: The Contractor shall notify the task order COR of any condition that may delay Contractor's performance. The method of reporting, to include how quickly and whether the notification should be in writing, verbally, etc., will be specified in the task order PWS.

Examples of instances where this may occur at the task order level are as follows:

5.18.1 When it is suspected or confirmed that material failure is the cause of an aircraft accident.

5.18.2 A condition or material fault that is a hazard to personnel, equipment and missions.

5.18.3 When a prescribed installation or maintenance action cannot be accomplished or when operational characteristics or durability cannot be obtained because of faulty design or materials.

5.18.4 Conditions which are direct results of poor quality workmanship during manufacture, modification, repair or overhaul, a Standard Form (SF) 368 Quality Deficiency Report (QDR).

5.18.5 Deterioration of installed components or operational equipment due to effects of climatic or environmental conditions.

5.18.6 Inadequate, insufficient or otherwise deficient technical publications which prevent or hinder accomplishment of the contracted maintenance which, if not corrected, may cause a hazard or be a SafetyofFlight condition.

5.18.7 Conditions which prevent proper operation of the equipment.

5.18.8 When equipment does not perform to published operational or maintenance standards.

6.0 CDRLs/DELIVERABLES

The CDRLs listed below are representative of those that may be dictated by the CFT basic contract and an individual task order. This list is not meant to be exhaustive or inclusive of all that may be required, referenced, or otherwise identified within a given task order. As directed by the individual task order, the COR may require the Contractor to comply with an identified industry or commercial standard or request Contractor format or utilize existing Contractor data. See RFP, section J, for the DD1423s associated with the CDRLs listed at 6.1.

CDRL

Number

*CDRLs that may be used on individual task orders without a specific CDRL # assigned.

The required application of known CDRLs for the basic contract, as well as required CDRLs for each individual task order PWS, is specified in the table at 6.1.

6.1 The table below is a list of required CDRLs against both the basic contract and individual task order PWSs. Any CDRL specified for a task order is applicable to all task orders except the Strike Plan and Contractor Labor Dispute Plan, which will be one or the other.

A004

Reserved for Future Use

A005

Reserved for Future Use

6.2 After basic contract award, the Contractor shall submit SOPs to DCMA CMO IAW CDRL A001 & 4.3.2.1 within 30 calendar days after basic contract award. SOPs shall be submitted with an electronic notification to the supervisory quality assurance specialist within the contract administration office at DCMA Dayton. If the SOPs are hard copies, the contractor shall mail them to the contract administration office at DCMA Dayton. If this CDRL is available online via the Contractor's web based program, the Contractor shall provide permissions, passwords, etc in ample time for the CDRL to meet delivery specifications.

6.3 The contractor shall electronically submit a Small Business Participation Plan IAW CDRL A002 & 4.6. The Small Business Participation Plan is due semi-annually, beginning 6 calendar months after the basic contract award date, and shall be submitted electronically to the CFT PMO PM.

6.4 The contractor shall electronically submit…