FA7022-17-R-0004-0002.docx

DOCX document 67 KB Posted

Attached to
Technical Sensor Radar Support
Solicitation number
FA7022-17-R-0004_Final
Issued by

About this file

FA7022-17-R-0001-0002 Amendment 2

View the file

Other files

File Type Posted
FA7022-17-R-0004-0003.pdf PDF
Attach_4_Labor_Rates_Rev_1.xlsx XLSX spreadsheet
FA7022-17-R-0001-0001.docx DOCX document
Exhibit_A_CDRLs_A001_to_A006.pdf PDF
Attach_5_PPQ.pdf PDF
Attach_2_DD_254.pdf PDF
Attach_3_Labor_Category_Description.pdf PDF
Attach_1_v2.3-PWS-FINAL_TSRS_Follow-On.docx DOCX document
Attach_4_Rates.xlsx XLSX spreadsheet
FA7022-17-R-0004.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FA702217R0004

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The CLIN extended description has changed from:

The contractor shall perform as required to support the performance of CLIN 0001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $37,000.00.

To:

The contractor shall perform as required to support the performance of CLIN 0001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $22,500.00.

CLIN 0003

The contract type has changed from CPFF to COST.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

FOB: Destination

SIGNAL CODE: A

ESTIMATED COST

CLIN 1002

The contractor shall perform as required to support the performance of CLIN 1001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $76,220.00.

The contractor shall perform as required to support the performance of CLIN 1001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $46,350.00.

CLIN 1003

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

OPTION
Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

ESTIMATED COST

CLIN 2002

The contractor shall perform as required to support the performance of CLIN 2001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $78,506.60.

The contractor shall perform as required to support the performance of CLIN 2001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $47,740.

CLIN 2003

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

OPTION
Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

ESTIMATED COST

CLIN 3002

The contractor shall perform as required to support the performance of CLIN 3001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $80,861.80.

The contractor shall perform as required to support the performance of CLIN 3001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $49,173.00.

CLIN 3003

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

OPTION
Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

ESTIMATED COST

CLIN 4002

The contractor shall perform as required to support the performance of CLIN 4001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $86,287.65.

The contractor shall perform as required to support the performance of CLIN 4001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $50,648.00.

CLIN 4003

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

OPTION
Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

ESTIMATED COST

CLIN 5002

The contractor shall perform as required to support the performance of CLIN 5001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $42,893.14.

The contractor shall perform as required to support the performance of CLIN 5001 on a cost-reimbursement/no fee basis, in accordance with the requirements set forth in the PWS. Not To Exceed amount for this CLIN is $26,084.00.

CLIN 5003

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead or Riverside RAD Lab Director. The invoicing of these services shall be included in the month that services were provided.

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

The pricing detail quantity 1.00 has been deleted.

ITEM NO
SUPPLIES/SERVICES
QUANTITY
UNIT
UNIT PRICE
AMOUNT

Lot

OPTION
Consultants

COST

This CLIN is for services to be provided by a Consultant as needed. These services will be provided with the direct approval of the COR and the TSRS Project Lead. The invoicing of these services shall be included in the month that services were provided.

ESTIMATED COST

SECTION F - DELIVERIES OR PERFORMANCE

The following Delivery Schedule item for CLIN 0003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

31-OCT-2018

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 18-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

The following Delivery Schedule item for CLIN 1003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-NOV-2018 TO

31-OCT-2019

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

The following Delivery Schedule item for CLIN 2003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-NOV-2019 TO

31-OCT-2020

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

The following Delivery Schedule item for CLIN 3003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-NOV-2020 TO

31-OCT-2021

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

The following Delivery Schedule item for CLIN 4003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-NOV-2021 TO

31-OCT-2022

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

The following Delivery Schedule item for CLIN 5003 has been changed from:

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-MAY-2018 TO

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

DELIVERY DATE
QUANTITY
SHIP TO ADDRESS
DODAAC / CAGE

POP 01-NOV-2022 TO

30-APR-2023

N/A
AFTAC/TOPS - F3KTK5

SHERRY MARTIN

10989 S PATRICK DRIVE

BLDG 10989

PATRICK AFB FL 32925-3002

321-494-1217

F3KTK5

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

The following have been modified:

SECTION L

PART IV—REPRESENTATIONS AND INSTRUCTIONS SECTION L

Instructions, Conditions, and Notices To Offerors

L-III INFORMATION TO OFFERORS (ITO) and INSTRUCTIONS FOR PROPOSAL PREPARATION

1. Program Structure and Objectives This effort involves highly specialized advisory and assistance services to provide operations, logistics, maintenance, engineering, software integration, sustainment, and budget support for two (2) radar sensors, GS and CK, and for any replacement or additional radar sensor that may be developed during the contract period. The contract will be a Cost Reimbursement type contract. The Contract Line Item Numbering (CLIN) structure consists of a Cost-Plus-Fixed-Fee (CPFF) CLIN and Cost-Reimbursement (COST) CLINs. The CPFF CLIN is for performance monitoring cost associated with each of the two (2) locations; Gray Star and Cobra King. The COST CLINs are for reimbursement of the actual cost of travel and consultants in support of this contract, which is non-fee bearing. DCAA approved rates are allowed as an indirect expense, while the prime contractors’ fee or profit are not allowed. The government has provided plug numbers for the travel CLINs in this solicitation with a government estimated cost based on historical data, and are Not-to-Exceed (NTE) amounts. Offerors shall identify all indirect expenses applied to these CLINs as a rate, but shall not adjust the estimates in the proposal. The contract will have a 6-month base period, four 1-year option periods, and a 6-month option period, for a total period of performance (PoP) of 5 years.

2. General Instructions

A. The offeror's proposal must include all data and information requested by this ITO and must be submitted in accordance with these instructions. The offer shall be compliant with the requirements as stated in the Performance Work Statement (PWS), Contract Data Requirements List (CDRL). Non-conformance with the instructions provided in this ITO may result in an unfavorable proposal evaluation and may be grounds to eliminate the proposal from consideration for contract award.

B. The proposal shall be clear, concise, and shall include sufficient detail for effective evaluation and for substantiating the validity of stated claims. The proposal should not simply rephrase or restate the Government's requirements but rather shall provide convincing rationale to address how the offeror intends to meet these requirements. Offerors shall assume that the Government has no prior knowledge of their facilities and experience and will base its evaluation on the information presented in the offeror's proposal. Any reference to day(s) stated in the RFP, attachments and other contractual documents should be considered as “calendar” days unless specifically stated otherwise. Offerors are advised their proposals are presumed to represent their best efforts and most complete responses to this solicitation. Demonstration of capability and qualifications that clearly support the offeror’s claims are essential. The absence of such evidence will adversely influence evaluation of the proposal. Offers will be evaluated using the Factors and Subfactors under Section M, Evaluation Factors for Award.

C. Elaborate brochures or documentation, binding, detailed art work, or other embellishments are unnecessary and are not desired.

D. The proposal acceptance period is specified in Section A of the solicitation. The offeror shall make a clear statement in Section A of the proposal documentation volume that the proposal is valid through this date.

E. In accordance with FAR Subpart 4.8 (Government Contract Files), the Government will retain one copy of all unsuccessful proposals. Unless the offeror requests otherwise, the Government will destroy extra copies of such unsuccessful proposals.

3. General Information

A. Point of Contact. The Contracting Officer (CO) and Contracting Specialist (CS) are the ONLY points of contact for this acquisition. Address any questions or concerns you may have to the CO. Written requests for clarification may be sent to the CO/CS at:

AMIC Det 2 OL/PKA (Patrick AFB, FL) ATTN: Joyce Hongell and M. Susan Nichols 10989 S. Patrick Drive Patrick AFB, FL 32925

Contract Specialist: Ms. M. Susan Nichols Phone: 321-494-6072 E-mail: mary.nichols@us.af.mil Contracting Officer: Ms. Joyce G. Hongell Phone: 321-494-5206 E-mail: joyce.hongell@us.af.mil

B. Debriefings. The CO/CS will promptly notify offerors of any decision to exclude them from the competitive range; whereupon, they may request and receive a debriefing in accordance with FAR 15.505. Offerors excluded from the competitive range may request a preaward debriefing or they may choose to wait until after the source selection decision to request a postaward debriefing. However, offerors excluded from the competitive range are entitled to no more than one debriefing for each proposal. The CO/CS will notify unsuccessful offerors in the competitive range of the source selection decision in accordance with FAR 15.506. Upon such notification, unsuccessful offerors may request and receive a debriefing. Offerors desiring a debriefing must make their request in accordance with the requirements of FAR 15.505 or 15.506, as applicable.

C. Discrepancies. If an offeror believes that the requirements in these instructions contain an error, omission, or are otherwise unsound, the offeror shall immediately notify the CO/CS in writing with supporting rationale as well as the remedies the offeror is asking the CO to consider as related to the omission or error. The offeror is reminded that the Government reserves the right to award this effort based on the initial proposal, as received, without discussion. This reservation includes matters of additional or substitute pages of the initial proposal.

D. Electronic Reference Documents. All referenced documents for this solicitation are available on the Federal Business Opportunities (FedBizOpps) website at https://www.fbo.gov. Potential offerors are encouraged to subscribe for real-time e-mail notifications when information has been posted to the website for this solicitation.

E. Oral Presentations. Oral presentations as described in FAR 15.102 are not being considered for this acquisition.

F. Communications. Exchanges of source selection information between Government and offerors will be controlled by the CO/CS. Email may be used to transmit such information to offerors only if the email can be sent and received encrypted and includes “Source Selection Information – See FAR 2.101 & 3.104” in the Subject line. Otherwise, source selection information will be transmitted via Fed-Ex, USPS, etc.

G. Organization/Number of Copies/Page Limits. The offeror shall prepare the proposal as set forth in the Proposal Organization Table (Table 3.1 below). The titles and contents of the volumes shall be as defined in this table, all of which shall be within the required page limits and with the number of copies as specified in Table 3.1. The attachments identified in the table shall be separately bound in three-ring, loose-leaf binders, as necessary. The contents of each proposal volume are described in the ITO paragraph as noted in the table below:

Table 3.1 - Proposal Organization

VOLUME
ITO

Paragraph Number

VOLUME TITLE
COPIES
PAGE LIMIT
I
4
Administrative
Paper: Original and 3 copies

Electronic: 2 copies Unlimited

II
5
Technical/Technical Risk
Paper: Original and 3 copies

Electronic: 2 copies

III
6
Past Performance
Paper: Original and 3 copies

Electronic: 2 copies 40 pages*

IV
7
Cost/Price
Paper: Original and 3 copies

Electronic: 2 copies 40 pages

*Organizational structure change history is excluded from the page limitation of the Past Performance volume.

(1) Page Limitations. Page limitations shall be treated as maximums. If exceeded, the excess pages will not be read or considered in the evaluation of the proposal. Each page shall be counted except the following: cover pages, tables of contents, tabs, glossaries, list of key terms, appendices to technical volume, consent letters, and client authorization letters, and company financial statements. Page limitations may be placed on responses to Evaluation Notices (ENs). The specified page limits for EN responses will be identified in the letters forwarding the ENs to the offerors. Each page shall be counted towards the stated page limitations, except as follows: The table of contents, tables of illustrations, title pages, dividers and blank pages will not be included in the page limitation. Cross-reference pages must not exceed five (5) pages per volume and will not be counted as part of the page limitation.

(2) Page Size and Format. These instructions shall apply to both electronic and paper copy proposals.

a. Standard Page Format. A page is defined as each face of a sheet of paper containing information. When both sides of a sheet display printed material, it shall be counted as two pages. Page size shall be 8.5 x 11 inches, not including foldouts. Pages shall be no less than single-spaced. Except for the reproduced sections of the solicitation document, the text type shall be Times New Roman or Arial. The text size shall be no less than 12 point. Tracking, kerning, and leading values shall not be changed from the default values of the word processing or page layout software. Use at least 1 inch margins on the top and bottom and ¾-inch side margins. Pages shall be numbered sequentially by volume. These page size and format restrictions shall apply to responses to Evaluation Notices (ENs) and Final Proposal Revisions (FPRs), if required. These limitations shall apply to both electronic and hard copy proposals.

b. Format for Oversize Table, Charts, Schematics, Etc. Legible tables, charts, graphs and figures shall be used wherever practical to depict organizations, systems and layout, implementation schedules, plans, etc. These displays shall be uncomplicated, legible, and shall not exceed 11 by 17 inches in size. Foldout pages shall fold entirely within the volume, count as a single page, and all in the same direction, i.e. side-to-side or up-down. Each 8.5 x 11 page of the fold-out section will be counted as one page. Foldout pages may only be used for large tables, charts, graphs, diagrams and schematics; not for pages of text. For tables, charts, graphs and figures, the text shall be no smaller than 8 point. These limitations shall apply to both electronic and hard copy proposals.

c. Double-sided printing is acceptable, but will count as two pages. Each printed side of foldout pages shall count as two pages each. The background color of each page of the proposal submission shall be white or ivory paper only. These page format restrictions shall also apply to responses to ENs and FPRs.

(3) Cost or Pricing Related Data. All cost or pricing data shall be addressed ONLY in the Cost/Price Proposal Volume. Cost tradeoff information, work hour estimates, and material kinds and quantities may be used in other volumes only as appropriate for presenting rationale for alternatives or design and tradeoff decisions.

(4) Classified Information. The Government does not desire that any classified information be included as part of your proposal. If it is absolutely necessary to provide classified information, it shall be submitted as a classified addendum to the appropriate proposal volume. Each entry in the classified addendum shall be referenced to the proposal volume, page number, and paragraph number to which it applies. Similarly, a reference shall be placed in the unclassified volume where the classified insert applies, giving the page and paragraph numbers within the addendum where it can be found. Binding shall conform to the same directions as those given in this ITO for unclassified portions. The classified addendum shall be separately bound with an applicable security designation color cover, conforming to the DD Form 254, and the Security Classification Guide. Pages in a classified addendum will be included in the page count for the applicable volume and shall conform to all proposal preparation instructions. Classified information shall be submitted in hard copy format only.

(5) Cross-Referencing. To the greatest extent possible, each volume shall be written on a standalone basis so that its contents may be evaluated with a minimum of cross referencing to other volumes of the proposal. Information required for proposal evaluation which is not found in its designated volume will be assumed to have been omitted from the proposal. Cross-referencing within a proposal volume is permitted where its use would conserve space without impairing clarity.

The offeror shall provide a Solicitation Cross Reference Matrix indicating by PWS and/or CDRL, and/or specification paragraph number, the corresponding proposal paragraph in that section which addresses the referenced item.

(6) Indexing. Each volume shall contain a more detailed table of contents to delineate the subparagraphs within that volume. Tab indexing shall be used to identify sections.

(7) Glossary of Abbreviations and Acronyms. Each volume shall contain a glossary of all abbreviations and acronyms used, and with an explanation for each. Glossaries do not count against the page limitations for their respective volumes.

(8) Binding and Labeling. Each volume of the proposal should be separately bound in a three-ring, loose leaf binder permitting the volume to lie flat when open. Staples shall not be used. A cover sheet should be bound in each book, clearly marked as to volume number, title, copy number, solicitation identification, and the offeror's name. The same identifying data should be placed on the spine of each binder. All unclassified document binders shall have a color other than red, yellow, or other applicable security designation colors. Be sure to apply all appropriate markings including those prescribed in accordance with FAR 52.215-1(e), Restriction on disclosure and use of data, and FAR 3.104-4, Disclosure, Protection, and Marking of Contractor Bid or Proposal Information and Source Selection Information both the paper copy and the CD.

H. Electronic Offers. The content and page size of electronic copies must be identical to the hard copies. For electronic copies, indicate on each CD the volume number and title. Use separate files to permit rapid location of all portions, including subfactors, exhibits, annexes, and attachments, if any. The offeror shall submit volumes I through V in electronic format, using recordable CDs. Each volume shall be in a different directory on a CD. If files are compressed, the necessary decompression program must be included. The electronic copies of the proposal shall be submitted in a format readable by Microsoft (MS) 2010 or higher for MS Office Word, MS Office Excel, MS Office Project, and MS Office Power Point, as applicable. In the event hard copies and electronic copies of a proposal are submitted and if there are any discrepancies between the hard copies and the electronic copies of the proposal, the hard copies will be used for evaluation.

(1) File Preparation. The offeror shall generate “bookmarks” within each PDF file for at least each section and subsection of the document. Bookmarks shall be generated based on indexed entities appearing in the document table of contents. The offeror has the option of generating “thumbnails” within the PDF files as well. The minimum requirement for hypertext links is an overall proposal table of contents linked to each volume and a table of contents within each PDF file linked to each section of the file. Additional hypertext links within the proposal are at the offeror’s discretion. The use of thumbnails or additional hypertext links will not influence the evaluation. The PDF file has a built in security function. The offeror shall set all security options in each PDF file to “allowed.” All text, including table and figure identifiers, shall be indexed and 100% searchable text. All text shall be displayed as a font and not displayed as a bitmap in any proposal volume or appendix to facilitate the ability to copy and paste to another document.

(2) Font and Page Setup. Text font and layout shall be as stated for paper copies. Hypertext links shall be the same minimum font size. The preferred method of implementing hyperlinks is to indicate the hyperlink by blue font color and establishing the hyperlink in Acrobat with “invisible rectangle” with “no outline.” However, the offeror may indicate hyperlinks by any color font or with a visible rectangle.

(3) Other Requirements. The offeror shall not embed sound or video files into the proposal files. Minimize the number of scanned images and keep embedded graphics as simple as possible.

(4) Proposal Format and Structure. Each volume of the electronic proposal shall be in its own subdirectory on the CD-ROM, sequentially labeled Volume 1 through Volume 4.

(5) Proposal Table of Contents file (TBLCONT.PDF). This file serves as a table of contents for the proposal information. The offeror shall provide the capability to “jump” from this file using hypertext links to all other PDF files on the CD-ROM. Also, include the list of key terms used in the proposal with their definitions, and a list of acronyms and abbreviations used in the proposal.

(6) Cost Data File (COST.XLS). Submit an electronically encoded cost/price model in support of the proposed price. Any cost/price model submitted must be consistent with your approved estimating system and must duplicate the logic and mathematical formulas reflected in the paper copy of your proposal. Cost/price models submitted must comply with the following format requirements:

· Data file should be submitted on a CD.

· Data file should be .XLS file format (MS-Excel 2010 or higher) compatible format.

· This file must cross-reference to Section B, Contract Line Item Numbers (CLINs), PWS and the Cost Breakdown

I. Distribution. The "original" proposal shall be identified. Proposals shall be addressed to the CO/CS and mailed or hand carried to:

AMIC Det 2 OL/PKA (Patrick AFB, FL) Attn: Joyce Hongell/M. Susan Nichols 10989 South Patrick Drive Patrick AFB, FL 32925

Ms. M. Susan Nichols Phone: 321-494-6072 E-mail: mary.nichols@us.af.mil

Ms. Joyce G. Hongell Phone: 321-494-5206 E-mail: joyce.hongell@us.af.mil

Submit your proposal to arrive no later than time and date stated on SF 33, Block 1 of the solicitation. All proposals delivered in response to this solicitation shall reflect the following information on the address label:

1. Solicitation Number FA7022-17-R-0004

1. the legend, “TO BE DELIVERED UNOPENED TO THE CONTRACTING OFFICER”, and

(3) the volume and copy numbers contained in each box.

4. Volume I –Administrative A master table of contents of the entire proposal is required. The offeror shall also provide the following in the Administrative volume:

A. Model Contract/Representation and Certifications. The purpose of this volume is to provide information to the Government for preparing the contracted document and supporting file. The offeror’s proposal shall include a signed copy of the Model Contract and Sections A through K. This includes the following:

(1) Section A - Solicitation/Contract Form. Completion of blocks 12-16 and signature and date for blocks 17 and 18 of the SF-33. Signature by the offeror on the SF-33 constitutes an offer, which the Government may accept. The "original" copy should be clearly marked under separate cover and should be provided without any punched holes.

(2) Section B - Supplies or Services and Costs/Prices. Completed pricing information in Section B of the model contract.

1. Section F – Deliveries or Performance. Acknowledge content of Section F.

(4) Section G - Contract Administrative Data. Complete the fill-in required in contractor’s contract administration. If not applicable, state reason why.

(5) Section H - Special Contract Requirements. Acknowledge or address content of Section H as applicable.

(6) Section I - Contract Clauses. Complete information in Section I as applicable.

(7) Section K - Representations, Certifications, and other Statements of Offerors. Complete representations, certifications, acknowledgments and statements. (NOTE: Offerors must comply with the Online Representations and Certifications Application (ORCA) requirements of FAR 52.204-8.)

B. Exceptions to Solicitation Requirements. Offerors are required to meet all solicitation requirements, such as terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors or subfactors. Offerors must clearly identify any exceptions to the solicitation and provide complete accompanying rationale. Each exception shall be specifically related to each paragraph and/or specific part of the solicitation to which the exception is taken. Provide rationale in support of the exception and fully explain its impact, if any, on the performance, schedule, cost, and specific requirements of the solicitation. This information shall be provided in the format and content of Table 4.1.

Table 4.1 - Solicitation Exceptions

Solicitation Document Page/ Paragraph Requirement/ Portion Rationale

PWS, SPEC, Model Contract, ITO, etc.
Applicable

Page and Paragraph Numbers

Identify the requirement or portion to which exception is taken
Describe

why the requirement can/will not be met

C. Other Information Required.

(1) Authorized Offeror Personnel. Provide the name, title, and telephone number of the company/division point of contact regarding decisions made with respect to your proposal and who can obligate your company contractually. Also, identify those individuals authorized to negotiate with the Government.

(2) Government Offices. Provide the mailing address, telephone and fax numbers, email address (if known) and facility codes for the cognizant Contract Administration Office, DCMA, DCAA, and Government Paying Office. Also, provide the name and telephone number for the Administrative Contracting Officer (ACO). Provide e-mail address if known. Provide the same information for your major subcontractors.

(3) Company/Division Address, Identifying Codes, and Applicable Designations. Provide company/division's street address, county and facility code; CAGE code; DUNS code; TIN; size of business (large or small); and labor surplus area designation. This same information must be provided if the work for this contract will be performed at any other location(s). List all locations where work is to be performed and indicate whether such facility is a division, affiliate, or subcontractor, and the percentage of work to be performed at each location.

(4) Amendments. Acknowledgement of all amendments (if applicable).

(5) Subcontracting Plan – Participation of Small Business (SB), Historically Black Colleges and Universities, or Minority Institutions (HBCU/MI). If the offeror is other than a small business, the offeror shall submit a Small Business Subcontracting Plan in accordance with FAR 52.219-9 that also identifies and specifies the extent of offeror’s commitment to the participation of SB, HBCU, and MI, whether as joint venture members, teaming arrangement partners, or subcontractors. If applicable, submit a copy of your approved Master Plan, In the event the offeror has negotiated a comprehensive subcontracting plan pursuant to DFARS 219.702, the offeror must submit the information that identifies and specifies the extent of its commitment to the participation of SB, HBCU, and MI.

(6) Proposal Validity. Statement of the period for which the proposal is valid (not less than 180 days).

(7) Clearances. Evidence of required facility and personnel clearances.

(8) 8(a) Status. If applicable, provide a copy of the letter from the Small Business Administration (SBA) showing proof of Section 8(a) status.

(9) Associated Contractor Agreements. None

(10) Evidence of a Government-approved cost accounting system.

(11) GFP/GFE. The Government does not plan to provide GFP/GFE. If the offeror requires the use of Government furnished items, the offeror shall provide a listing including quantity, federal stock number, nomenclature, date needed and duration of availability, rental value per FAR 45.1 and 45.2, reason for need, and cross reference to cost/price volume paragraphs which pertain to the GFP/GFE

(12) Additional Required Documentation.

a. Government Facilities Use Plan (FAR Part 45)

b. Purchasing Plan (FAR Part 15)

D. Executive Summary. The executive summary shall contain a concise narrative summary of the offeror's proposal, including significant risks, and a highlight of any key or unique features, excluding cost/price. The salient features should tie in with the evaluation factors/subfactors in Section M. The executive summary is not evaluated, but does serve to orient the evaluators to the approach and features of your proposal. Any summary material presented in the executive summary shall not be considered as meeting the requirements for any portions of other volumes of the proposal.

5. Volume II – Technical Capability

A. General. The Technical Capability Volume should be specific and complete. Legibility, clarity, and coherence are very important. Your responses will be evaluated against the technical subfactors defined in Section M, Evaluation Factors for Award. Using the instructions provided below, provide as specifically as possible the actual methodology you would use for accomplishing/satisfying these subfactors. All the requirements specified in the solicitation are mandatory. By your proposal submission, you are representing that your firm will perform all the requirements specified in the solicitation. It is not necessary or desirable for you to tell us so in your proposal. Do not merely reiterate the objectives or reformulate the requirements specified in the solicitation.

B. Technical.

(1) In the technical volume, address your technical solution for meeting or exceeding the Government’s minimum performance or capability requirements of each technical subfactor. The information provided should be in sufficient detail to allow the Government to assess the offeror’s understanding of and capability to perform the work required by the PWS(s). Your proposal must describe the capability of your organization to perform this contract including pertinent aspects of the proposed approach such as teaming or subcontracting arrangements. Offerors shall assume that the Government has no prior knowledge of their facilities and experience, and will base its evaluation on the information presented in the offeror’s proposal. It is your responsibility to ensure the completeness of your proposal. The Government evaluation team has been instructed to evaluate on the basis of the information provided in the proposal. The Government shall not assume that an offeror possesses any capability unless specified in the proposal.

(2) This acquisition requires access to classified information and shall include a DD Form 254, Department of Defense Contract Security Classification Specification. Contractor personnel supporting this effort must possess appropriate security clearances. The National Industrial Security Program Operating Manual (NISPOM) and related regulations and laws are applicable to this contract. Prospective sources must have a facility that can host a classified computer network to support secure communications with the Program Office. The minimally acceptable proposal must clearly demonstrate the offeror possesses a TOP-SECRET facility clearance on the first day of contract performance and meet the other requirements specified on the DD254. All contractor personnel supporting this contract shall possess a minimum of a SECRET security clearance, with a current Background Investigation (BI) on the first day of contract performance and meet the other requirements specified on the DD254. Key management personnel and all Technical Advisors assigned duties on the vessels require a TOP SECRET security clearance, with a current Single Scope Background Investigation (SSBI) on the first day of contract performance and meet the other requirements specified on the DD254. Proposals shall include a list of all personnel and their security clearance information.

C. Technical Risk. Address all Risk associated with those aspects of your proposed technical approach you consider to have the potential for disruption of schedule, increased cost, degradation of performance, the need for increased Government oversight, or the likelihood of unsuccessful contract performance. Classify each risk in accordance with DoD Source Selection Procedures Table 2b, Technical Risk Rating, enclosed. Provide the rationale for each risk and its rating at the subfactor level, including quantitative estimates of the impact on cost, schedule, and performance. Describe the potential impact of each identified risk to interfere with or prevent the successful accomplishment of other contract requirements (for example: PWS or specification requirements), whether or not those requirements are identified as subfactors. Propose a realistic "workaround" or risk mitigators for identified risks that will eliminate the risk or reduce it to an acceptable level. Identify and classify any new risks introduced by such risk mitigation.

D. Key Personnel. The Technical Capability Volume shall specify the proposed number of key personnel and their types, qualifications, duties, and security clearance level for each subfactor required to perform the tasks associated with the PWS.

Include “Key Personnel Qualifications Summary” for key personnel assigned or intended to be assigned to this contract. Summary should be by function – identifying key personnel for each function. See L-5 for sample Key Personnel Qualifications Summary.

E. Format and Specific Content - Technical. In the Technical Capability volume, address your technical solution for meeting or exceeding the Government’s minimum performance or capability requirements of each technical subfactor.

F. Volume Organization. The Technical Capability volume shall be organized according to the following general outline:

· Table of Contents

· List of Table and Drawings

· Glossary

· Cross Reference Matrix

· Subfactor 1: Engineering Support

· Subfactor 2: Software Integration

· Subfactor 3: Operations Support

· Subfactor 4: Logistics Support

· Risk Matrix

(1) Subfactor 1 – Engineering Support. This subfactor is the most important of the four subfactors listed under Technical Capability. Consider the Government's Section M description of its evaluation intentions when writing your proposal on this subfactor. The offeror shall include their proposed approach to provide engineering support in support of the mission of the technical sensors. The proposal shall demonstrate the offeror’s approach to providing phased array and dish radar remote troubleshooting and technical assistance in the repair and restoral of radar hardware defects. Offerors shall demonstrate their approach to maintaining currency on emerging technologies associated with high power phased array and dish radar systems. Proposals shall demonstrate their approach to conducting, producing, and implementing engineering studies; integrating new and legacy technologies; and identify underperforming components. In addition, the offeror shall demonstrate their approach to obtaining an in-depth understanding of the relationships and interconnectivity of all sub-components of a high power phased array and dish radar systems (S and X-Band). They shall demonstrate they understand how S-Band and X-Band radar systems interact with each other and how calibration techniques and methodologies affect radar performance. Proposals shall demonstrate their approach and capability to conduct engineering studies to identify potential corrective actions. Offerors shall demonstrate their approach to collecting, tracking and monitoring radar sensor calibration and data quality and performance parameters in order to determine if any degradation is occurring. Offerors shall demonstrate how they will use radar performance data to make recommendations for correcting any system performance degradations.

(2) Subfactor 2 – Software Integration Support. This subfactor is more important than subfactor 3 but less important than subfactor 1 in Technical Capability. Consider the Government's Section M description of its evaluation intentions when writing your proposal on this subfactor. The offeror shall provide a proposed approach to Software Integration support as identified in the PWS under section 2.4. Proposals shall demonstrate how they will obtain the ability to host mission software at their site for assisting in software upgrades and regression testing, and the technical background to assist in software troubleshooting. Specific attention shall be given to the offerors proposed Software Integration Support capabilities that will achieve the performance thresholds identified in the Services Summary, PWS paragraph 3, and the ability to work with outside agencies to accomplish this. The offeror shall demonstrate the capability to provide the necessary software engineering needed to identify and provide resolution to obsolescence issues. The proposal shall include the offerors ability to maintain C++ and LINUX based radar operating systems, manage UNIX and Windows operating systems, and exploit MATLAB® based analysis programs. Proposals must demonstrate an ability to provide technical support for maintaining and troubleshooting software related errors and faults in an operational radar system and the ability to provide technical assistance in conducting new software acceptance regression testing and evaluation. Finally, all offerors must demonstrate the ability to identify, evaluate, and incorporate new software requirements associated with radar sustainment and modernization efforts.

(3) Subfactor 3 - Operations Support. This subfactor is more important than subfactor 4 but less important than subfactor 1 in Technical Capability. Consider the Government's Section M description of its evaluation intentions when writing your proposal on this subfactor. Proposals shall demonstrate their approach to providing 24/7 manning for a Technical Advisor (TA) position onboard the USNS Howard O. Lorenzen. Proposals must identify in their approach how personnel selected for TA duties will obtain and or retain the ability to assist in all facets of mission planning and operations. The proposal’s approach shall demonstrate that the TAs have an overall understanding of the operations of the CK platform and the ability to assist and provide guidance in all phases of the mission, to include pre-mission planning, real-time mission operations, and post mission analysis and report generation.

(4) Subfactor 4 - Logistics Support. This subfactor is the least important of the four subfactors under Technical Capability. Consider the Government's Section M description of its evaluation intentions when writing your proposal on this subfactor. The offerors shall demonstrate their capability to conduct full system life extension studies, as well as the ability to provide technical assistance in radar upgrades and maintenance. Offerors approach shall demonstrate the ability to conduct on request detailed whole radar system (Hardware/Software) studies for life extension. Proposals shall demonstrate their approach to performing systems analysis and generating system performance reports as specified in the contract. Offerors shall demonstrate in their logistics support approach how they will provide resources to fulfill requirements at various worldwide locations during system upgrades and when maintenance assistance is required. This section should provide insight into the offeror’s capabilities (including small business and SDB concerns). As part of their overall logistics support approach, the offeror shall address Organizational Conflict of Interest (OCI). Provide, as specifically as possible, the actual methodology/approaches you would use for accomplishing/satisfying this subfactor. Offeror shall identify any real or perceived OCI concerns presently and provide a detailed plan how they will avoid, neutralize or mitigate any conflict as well as how they will address a real or perception of OCI that develops during the duration of the contract.

6. Volume III - Past Performance

A. General. Each offeror shall submit a past performance volume with its proposal, containing past performance information in accordance with the format contained in paragraph C. Specific Content below. This information is required on the offeror and all subcontractors, teaming partners, and/or joint venture partners proposed to perform 20 percent or more of the proposed effort based on the total proposed price; or, that will perform aspects of the effort the offeror considers critical to overall successful performance. Offerors are cautioned that the Government will use data provided by each offeror in this volume and data obtained from other sources in the evaluation of past performance. The Government reserves the right to review contracts considered representative of past and on-going relevant performance, other than those suggested by the offeror.

(1) Small Business Subcontracting Plan. Provide, as specifically as possible, the actual methodology/approaches you would use for accomplishing/satisfying this subfactor. If the offeror is other than a small business, the offeror shall submit a Small Business Subcontracting Plan in accordance with FAR 52.219-9 that also identifies and specifies the extent of the offeror’s commitment to the participation of all small business concerns, whether as joint venture members, teaming arrangement partners, or subcontractors. If applicable, submit a copy of your approved Master Plan. In the event the offeror has negotiated a comprehensive subcontracting plan pursuant to DFARS 219.702, the offeror must submit the information that identifies and specifies the extent of its commitment to the participation of small business concerns. Small Business participation will not be evaluated as a stand-alone factor or subfactor, but instead will be considered within the evaluation of the Logistics Subfactor under Technical Factor.

(2) Administrative. Along with the information required in this paragraph, the offeror shall submit a consent letter executed by each subcontractor, teaming partner, and/or joint venture partner, authorizing release of adverse past performance information to the offeror so the offeror can respond to such information.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .