FA700024Q0107 - Combined Synopsis_Solicitation (Amendment 1).pdf

PDF 222 KB Posted

Attached to
USAFA Wire Electrical Discharge Machine (EDM)
Solicitation number
FA700024Q0107
Issued by

About this file

This document is a Combined Synopsis/Solicitation for a commercial item procurement issued by the Department of the Air Force Headquarters Air Force Academy. The requirement is to replace one Wire Electrical Discharge Machine (EDM) at the United States Air Force Academy in Colorado. The salient characteristics of the new Wire EDM are provided, including tolerances, axis travel, size, wire size capability, power requirements, and warranty. This is a 100% small business set-aside under NAICS code 333517, with quotes due by 10:00 a.m. MDT on September 16, 2024. The solicitation notes that funds are not currently available, and the Government reserves the right to cancel. A site visit is scheduled for September 11, 2024. Award will be made to the vendor providing the best value based on price, technical, and past performance factors.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT 1

COMBINED SYNOPSIS/SOLICITATION

FA700024Q0107

U. S. Air Force Academy

FY24 USAFA Wire Electrical Discharge Machine (EDM)

This is a combined synopsis/solicitation for commercial items prepared in accordance with (IAW) the format in Federal Acquisition Regulations (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued.

This solicitation is issued as a request for quotation (RFQ) in accordance with FAR part 12 and part 13 under solicitation number FA700024Q0107. The Request for Quotation (RFQ) number shall be used to reference any written quote provided under this RFQ. The RFQ document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-06, effective 29 Aug 2024, DFARS change, effective 15 Aug 24, and Department of the Air Force Federal Acquisition Circular (DAFAC) change, effective 12 June 24.

This requirement is a 100% small business set-aside. The associated North American Industry Classification Systems (NAICS) Code is 333517 with a size standard of 500 employees. The Product Service Code (PSC) 3410.

***Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs.***

The Government bears no legal liability for the costs associated with preparing a quote. Vendors should not submit a quote unless they are willing to absorb all costs associated with submitting a quote.

Before submitting a quote, please read the instructions in the addenda to FAR 52.212-1, Instructions to Offerors - Commercial Items, listed below and comply with all requirements for submitting a quote. Failure to comply with all instructions contained within this synopsis/solicitation could result in the quote being ineligible for award. It is the quoter’s responsibility to ensure their quote meets all the requirements identified herein. Quoters must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. The quotes will be evaluated IAW FAR 52.212-2, found herein.

I. DESCRIPTION OF REQUIREMENT

The purpose of this combined synopsis and solicitation is to replace one Wire Electrical Discharge Machine (EDM) on the second floor of Fairchild Hall located at the United States Air Force Academy (USAFA), CO 80840. The vendor will be responsible for removing/disposing of the existing Wire EDM (AgieCharmilles FI 240 CC, offered as trade-in) from USAFA in http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/FAR12.DOC#s126 accordance with Federal, DoD, State, local and environmental laws and providing and installing one new Wire EDM to the same location. Note: The freight elevator in Fairchild Hall is limited to 5,000 pounds and a volume of approximately 86”x116”x94”. The Wire EDM must include the following minimum salient characteristics:

• Hold to tolerances of +/- 0.0005 inches to a finish of 18 microinches (µin) or lower (better)

• Axis travel of x: 12.0”, y: 10.0”, z: 8.0” or larger

• Floorspace must not exceed 12’x10’x8’

• Must not exceed the limitations of the freight elevator (see above)

• Capable of wire sizes of 0.004” - 0.012”

• Extra set of basic consumables to include, but not limited to, extra 0.010” guides and

0.010” hard brass wire and water filters

• Programming able to read G-Code

• Standard North American power (60 Hz, 200V-240V-3 phase)

• Machine installation and initial training

• Minimum 1-year manufacturer’s warranty

• Instruction manual in both print and digital formats

All shipping, rigging, installation of the new machine, and removal/disposal of the old machine is to be provided by the vendor.

It is USAFA’s preference/intent to acquire only domestic end products per the Buy American Statute (41 USC Chapter 83), except as provided in FAR 25.103. Foreign offers will be evaluated per DFARS 225.502 when comparing domestic and foreign offers. This requirement is for commercial items; therefore, the manufacturing country of origin will determine if the quoted product is foreign or domestic. The Buy American – Balance of Payments Program Certificate (DFARS 252.225-7000), Attachment 3 –Buy American Certificate, must be completed and submitted with the quote.

All contract line-item numbers (CLINs) are firm fixed price (FFP). The offer schedule and contract CLIN schedule are below.

Item Supplies/Service Quantity Unit Unit Price Total Amount

Electrical Discharge Machine IAW Attachment 1 – Salient Characteristics

Each

The offeror shall state prices for the new item(s) being acquired with any trade-in allowances/discounts shown separately on the quote.

The Government will not provide IUID labeling.

Delivery Delivery must be F.O.B. Destination to United States Air Force Academy, CO 80840. Any applicable shipping costs must be factored into the unit price(s) of the line item(s). Do not include a separate line item for shipping charges.

FOB Destination (As defined in FAR 2.101—Definitions), the seller or consignor is responsible for the cost of shipping and risk of loss.

Delivery Schedule: Schedule to be submitted by vendor.

Inspection and Acceptance The Government will inspect and accept supplies at the Government’s location, U.S. Air Force Academy, CO 80840. Payment on invoices cannot be made until the Government has accepted the supplies.

The Government will not consider any quotes that contain used, reconditioned, refurbished, gray market, or liquidated stock.

II. SITE VISIT

1. A site visit will be held on Wednesday, 11 September 2024, at 1:00 P.M. Mountain Daylight

Time (MDT) at the U.S. Air Force Academy, CO 80840. Due to timeline restrictions, this will be the only site visit held for this solicitation.

2. Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award.

3. If an offeror determines a site visit is required to quote, please RSVP to Tammy Martin at tammy.martin.6@us.af.mil by 9 September 2024, 3:00 p.m. MDT. A valid driver’s license and insurance are required for entry into USAFA. Attendance is limited to no more than three personnel per company. A site visit is not required to submit a quote.

III. SOLICITATION INSTRUCTIONS

1. In all instances throughout this solicitation, to include the applicable provisions and clauses, any use of the word "proposal" should be understood as "quote." All instances of the word "offeror" should be understood as "quoter." All instances of the word "award" should be understood as "purchase order."

2. Quotes supplied in response to this solicitation are not binding. Award of this requirement will be offered to the Quoter IAW 52.212-2, found herein.

3. The provision at FAR 52.212-1, Instructions to Offerors—Commercial Products and

Commercial Services (Sep 2023), and the addenda listed below apply to this acquisition.

Addenda to FAR 52.212-1

(1) Paragraph (a) first sentence revised as follows: “The NAICS code and small business mailto:tammy.martin.6@us.af.mil size standard for this acquisition appear above.”

(2) Paragraph (b) Submission of offers is amended to include the following: Submit signed and dated quotes to via e-mail to tammy.martin.6@us.af.mil no later than 4:00 p.m. Mountain Daylight Time on September 16, 2024.

Note: zip files are not an acceptable format for the Air Force Network and will not go through our email system.

(3) Paragraph (f) Late Submissions: Quoters are responsible for submitting quotations so as to reach the Government office designated in the solicitation by the time specified in the solicitation. Any quotes received at the Government office designated in the solicitation after the exact time specified for receipt of quotations is late and may not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late quotation would not unduly delay the acquisition.

(4) Paragraph (g) Interchanges: The Government intends to award a contract without interchanges with respective vendors; however, the Government reserves the right to conduct interchanges, with all, some, or none of the vendors in its best interest.

(5) All questions regarding this RFQ must be emailed to tammy.martin.6@us.af.mil no later than 10:00 a.m. Mountain Daylight Time on September 12, 2024. The questions and answers will be compiled and posted in SAM.gov under the solicitation notice.

(6) The Contracting Officer is not responsible for locating or obtaining any information not identified in the quote. If applicable, provide a written statement that the quote incorporates all amendments to the solicitation.

(7) Quotation preparation instructions

a. General Instructions. The quoter shall submit their quote to include the following:

solicitation number, contact name, address, e-mail, and telephone number of the offeror, CAGE code, UEI number, size of business, and warranty information.

IAW FAR 12.602(a) when using the simplified acquisition procedures in FAR part 13, contracting officers are not required to describe the relative importance of evaluation factors.

The vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Federal Acquisition Regulation (FAR) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the FAR and Federal law govern and conflicting vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract.

b. Specific Instructions.

(a) PRICE QUOTATION. Submit the price quote IAW the line-item structure listed in the CLIN schedule of this solicitation. Price quotes must be firm-fixed price. Price quotes must include unit prices and extended amounts for each line item (i.e., multiply the unit price and quantity for each line item). Include the total price (i.e., sum of all extended amounts) in the price quote. Include delivery terms and schedule, any discounts, and payment terms (e.g., Net 30) with the price quote. The Government will not provide contract financing for this acquisition. Invoice instruction shall be provided at time of award.

(b) TECHNICAL

DESCRIPTIVE LITERATURE. For the quote to be considered by the Government, it must clearly meet the salient characteristics specified in this solicitation. Include any applicable descriptive literature, such as illustrations, specification sheets, or product brochures that clearly identify that the quote meets the Government’s requirements. The Government will not consider any quotes that contain used, reconditioned, refurbished, gray market, or liquidated stock.

Include your best warranty and delivery schedule, as applicable.

(c) PAST PERFORMANCE. The vendor’s exclusions will be checked on sam.gov. In addition, the vendor’s supplier performance risk system (SPRS) will be assessed. Authorized representatives of the Offeror for which the assessment was conducted may access SPRS to view their own summary level scores, in accordance with the SPRS Software User’s Guide for Awardees/ Contractors available at https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf

(d) CONTRACT DOCUMENTATION.

i. Quoters are required to be registered in the System of Award Management

(SAM) (https://www.sam.gov) at the time the quotation is submitted in order to comply with the annual representations and certifications requirements.

Quoters who are not registered in SAM at the time the quotation is submitted will not be considered.

ii. Quotes must include a completed copy of the following provisions that require fill-in text:

• FAR 52.212-3 The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

• FAR 52.212-3 ALT I - Offeror Representations and Certifications- Commercial Products and Commercial Services. (Alternate I)

• DFARS 252.225-7000 Buy American—Balance of Payments Program Certificate.

https://www.sprs.csd.disa.mil/pdf/SPRS_Awardee.pdf http://www.sam.gov/ http://www.sam.gov/

3. The addenda listed below at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services (Nov 2021) applies to this acquisition.

Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures IAW FAR 13.106. Vendor’s submissions will be evaluated based upon the following:

Addenda to FAR 52.212-2

Basis For Award

This is a competitive acquisition in accordance with FAR part 12 and FAR part 13. The Government will submit an offer in the form of a purchase order to the quoter that represents the best value to the Government. All quotes submitted will be reviewed for completeness. Quotes that are incomplete or missing information may be considered non-responsive and excluded from the evaluation. The Government will select the awardee that represents the best value based on price, technical, and past performance.

Addenda to FAR 52.212-4

The clause at FAR 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services, and the addendum listed below apply to this acquisition.

Text in paragraph (c) is deleted and replaced with the following:

(c) Changes. Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of certain changes such as administrative changes including changes in paying office, appropriation data, etc. authorized by the Federal Acquisition Regulation and its supplements that may be made unilaterally by the Contracting Officer, for a complete list of changes that may be made unilaterally, see FAR 43.103(b).

4. FAR clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or

Executive Orders—Commercial Products and Commercial Services (May 2024) applies to this acquisition. See Attachment 2 – Provisions and Clauses.

5. Defense Priorities and Allocations System (DPAS) and assigned rating do not apply to this acquisition.

Attachments to this Solicitation

Attachment 1 – Salient Characteristics Attachment 2 – Provisions and Clauses Attachment 3 – Buy American Certificate Attachment 4 – Photos of Existing EDM Attachment 5 – FAR 52.212-3(b) Attachment 6 – Photos of Fairchild Hall Facility

I. DESCRIPTION OF REQUIREMENT
III. SOLICITATION INSTRUCTIONS
Addenda to FAR 52.212-1
(d) CONTRACT DOCUMENTATION.
3. The addenda listed below at FAR 52.212-2, Evaluation—Commercial Products and Commercial Services (Nov 2021) applies to this acquisition.
Pursuant to FAR 12.602 contract award will be made using Simplified Acquisition Procedures IAW FAR 13.106. Vendor’s submissions will be evaluated based upon the following:
Addenda to FAR 52.212-2
Basis For Award
Addenda to FAR 52.212-4

File details come from the government source that posted it. Updated .