Atch_2_-_USAFA_LOE_-_Cadet_Mns_Flight_Cap.pdf

FA7000-18-R-0008

Attachment #2

UNITED STATES AIR FORCE ACADEMY

LETTER OF EXCEPTION

TO MILITARY SPECIFICATION MIL-C-3261F

FLIGHT (GARRISON) CAP, CADET, MEN’S

9 MAY 2017

No changes to content except date and cover page to previous LOE dated 110907.

USAFA LOE

MIL-C-3261F

USAFA LETTER OF EXCEPTON

FLIGHT (GARRISON) CAP, CADET, MEN’S

The following exceptions will apply when MIL-C-3261F is used to manufacture flight (garrison) caps for male cadets at the United States Air Force Academy.

1. Page 1, paragraph 1.2 Classification. Class 2 Officer, shall be applicable for

USAFA contracts.

2. Page 2, Paragraph 1.2.1 Sizes. Add size 8 and 8 1/8 to the schedule of sizes.

3. Page 2, Paragraph 2.1.1 Specifications, Standards and Handbooks. Disregard, supplement or replace the following military specifications/standards:

SPECIFICATION REPLACEMENT DOCUMENT TITLE

PPP-B-636 ASTM-D1974 BOX, SHIPPING, FIBERBOARD

V-T-276 A-A-52094 THREAD, COTTON

DDD-L-20 MIL-DTL-32075

LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE,

(GENERAL USE)

PPP-B-601 ASTM-D6251 BOXES, WOOD, CLEATED-PLYWOOD

PPP-B-636

ASTM-

D1974/D1974M

FIBERBOARD, BOXES, METHODS OF CLOSING,

SEALING, AND REINFORCING

PPP-T-45

A-A-1492 and A- A-1671

TAPE, GUMMED, PAPER, REINFORCED AND PLAIN,

FOR SEALING AND SECURING

MIL-B-1667 A-A-55264 BRAID, TEXTILE, CORD-EDGE

MIL-S-3577

Cancelled Replace with A-A-59701

SWEATBAND, HEADWEAR, LEATHER (NO S/S

DOCUMENT)CANCELLED, REPLACE WITH NYLON

BUNTING FOR SWEATBAND, TYPE I, CLASS A OF A-

A-59701, SEE 3.3.3

MIL-C-21115 MIL-DTL-21115 CLOTH, TROPICAL: WOOL, POLYESTER/WOOL

MIL-T-43548 A-A-50199

THREAD, POLYESTER CORE: COTTON-, RAYON-,

OR POLYESTER-COVERED

MIL-C-43718 A-A-52106

CLOTH, POLYESTER; POLYESTER AND COTTON;

POLYESTER AND RAYON POCKETS

MIL-C-83448 Cancelled CLOTH, SERGE, POLYESTER, TEXTURIZED

MIL-C-3738K Add CLOTH, ELASTIQUE, WOOL, TYPE II, 18 OZ, CLASS 1

FED-STD-751 ASTM-D6193 STITCHES, SEAMS, AND STITCHINGS

MIL-STD-105 ANSI-Z1.4

SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES

MIL-STD-147 MIL-HDBK-774 PALLETIZED UNIT LOADS

4. Page 4, Paragraph 3.1 First Article. Disregard the entire paragraph and substitute with the following: “Before each production is commenced, the contractor shall submit to the contracting officer, for inspection the following item:

One finished cap, size 7 ¼, conforming to the requirements of this specification”.

Note: This requirement may be waived if a prior contractor receives the contract for this item.

5. Page 4, Paragraph 3.3.1 Basic Material. Disregard the entire paragraph and substitute with the following: “The basic material for the cap shall conform to MIL- C-3738K, Cloth, Elastique, Wool, Type II, 18 ounce, Class 1, Shade 500, dated 31 March 1987”. This will be government furnished material (GFM).

6. Page 4, paragraph 3.3.2 Braid. Disregard the entire paragraph and substitute with the following: The braid for the cap shall conform to class 6 of A-A-55264.

7. Page 4, paragraph 3.3.3 Sweatband. Disregard the entire paragraph and substitute with the following: “Nylon bunting. The nylon bunting for the sweatband shall be dyed black and shall conform to type I, class A of A-A-55264, except that the color–fastness therein shall not apply. The dyed bunting shall show ‘good’ fastness to dry cleaning, perspiration, and crocking when tested.”

8. Page 5, Paragraph 3.3.6 Label. Disregard the entire paragraph and substitute with the following:

3.3.6 Identification and size label. “Each cap shall have a cloth, cotton, permanent-coated, combination identification, size and cleaning instruction label conforming to type VI, classes 1, 2, and 10 of specification MIL-DTL- 32075. The label will finish not less than 1” long and 2 ½” wide, and show the following information:

SIZE_________________________________

CADET LAST NAME_____________________

SSN (Last Four)____________ SQ__________

OR

Applicable data may be stamped in by contractor using indelible ink.

3.3.6.1 Size/bar-code label. The label shall be approximately 2” x 3”.

The numbers for the size shall be at least ¼” in height. The label will also be bar-coded using type 39 bar-code. The Bar-code will consist of the (10LRS/LGRCI) Cadet Issue Section stock number for each size. Label will be attached to the outside of each polyethylene film bag for convenience of wand reading.

9. Page 5, Paragraph 3.5 Design. Disregard the entire paragraph and substitute with the following: “The cap shall be for male USAFA cadets, envelope style, fully lined, and with USAF Officer silver and blue braid.”

10. Page 7, Table II. Manufacturing Operations, Operation 1. Cut parts. Add the following: "All elastique parts of the cap shall be cut out of one piece of material."

11. Page 17, Table III. Add the bottom row to the table for cap size 8 and 8 1/8.

Height of Side Panels 1/ Height of Curtain 2/

Cap Size

Center Front

Center Back

Overall at Side Center

Center Front

Center Back

Side Circum-ference

3/ 8 3 3/4 4 5 1/8 2 3/4 3 3 5/8 25

8 1/8 3 3/4 4 5 1/8 2 3/4 3 3 5/8 25 3/8

12. Page 21, paragraph 6.1 Intended Use. Replace the words:”Department of the Air

Force” with “United States Air Force Academy.”

Custodian: Preparing Activity:

USAF Academy Cadet Uniforms Section (10 LRS/LGRCU) Colorado Springs CO 80840 USAF Academy, CO 80840-8210

Reviewing Activity:

Cadet Logistics Chief (10LRS/LGRC) USAF Academy, CO 80840-8210