Solicitation Sweat Suits.doc.pdf

PDF 383 KB Posted

Attached to
Men's Sweat Suits
Solicitation number
FA7000-11-T-0016
Issued by

About this file

Solicitation FA7000-11-T-0016 for Sweat Suits

View the file

Other files

File Type Posted
Past Performance Survey Sweat Suits.doc DOC document
Amendment Solicitation Sweat Suits.pdf PDF
Product Description Sweat Suits 20 Jan 2010.rtf RTF text file
Bar Code Sample.pdf PDF
First Article Approval FAR 52.209-4.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

10 CONS - FA7000

ATTN: JON WILCZYNSKI

8110 INDUSTRIAL DRIVE, STE 200

LGCB

USAF ACADEMY CO 80840-2315

719-333-2933

719-333-9103

UNDER DPAS (15 CFR 700)

11. DELIVERY FOR FOB

RFQ

SEE SCHEDULE

14. METHOD OF SOLICITATION

IFB RFP

CODE

SEE ADDENDUM

BLOCK IS MARKED

DESTINATION UNLESS

12. DISCOUNT TERMS

(No Collect Calls)

13b. RATING

13a. THIS CONTRACT IS A RATED ORDER

X

CODE

FA7000-11-T-0016 18-Jan-2011

b. TELEPHONE NUMBER

719-333-8265

8. OFFER DUE DATE/LOCAL TIME

10:00 AM 27 Jan 2011

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV 3/2005)

Prescribed by GSA

FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER) 31c. DATE SIGNED

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

22. UNIT 23. UNIT PRICE 24. AMOUNT21. QUANTITY

CODE 10. THIS ACQUISITION IS

UNRESTRICTED

FAX: NAICS:

TEL:

CODE 18a. PAYMENT WILL BE MADE BYOFFEROR

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TEL.

FA7000

SIZE STD:

9. ISSUED BY

FACILITY

CODE

17a.CONTRACTOR/

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

15. DELIVER TO CODE FX7000 16. ADMINISTERED BY

10 MSG LGRMC - FX7000

MITCHELL HALL ANNEX, BLDG 2351

USAF ACADEMY CO 80840

TEL: 719-333-3017 FAX:

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

BRENDA S SMITH

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES

SEE SCHEDULE

315228

TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS

SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS

SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

SB

HUBZONE SB

SET ASIDE: 100 % FOR

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

SEE SCHEDULE

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

TEL: EMAIL:

1 COPIES

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

.OFFER DATED YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

X

8(A)

SVC-DISABLED VET-OWNED SB

EMERGING SB

X

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

SEE SCHEDULE

19. ITEM NO. 20. SCHEDULE OF SUPPLIES/ SERVICES 21. QUANTITY 22. UNIT 24. AMOUNT

PAGE 2 OF

23. UNIT PRICE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV 3/2005) BACK

Prescribed by GSA

FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

FA7000-11-T-0016

Section SF 1449 - CONTINUATION SHEET

ADDENDUM TO 52.212-4

1. HOURS OF DELIVERY.

Delivery of items under this contract shall be accomplished between the hours of 7:30 A.M. and 3:30 P.M., Monday through Friday, except as otherwise specified in the contract. No deliveries are to be made on Saturdays, Sundays or Federal Legal holidays.

2. FEDERAL AND LEGAL HOLIDAYS.

New Year's Eve 31 December New Year's Day 1 January Martin Luther King's Birthday Third Monday in January Washington's Birthday (President's Day) Third Monday in February Memorial Day Last Monday in May American Independence Day 4 July Labor Day First Monday in September Columbus Day Second Monday in October Veteran's Day 11 November Thanksgiving Day Fourth Thursday in November Christmas Eve 24 December Christmas Day 25 December

NOTE: If the days listed above fall on a Saturday or Sunday, Government personnel may be off work either the Friday before, or the Monday after the holiday. Contact the Contracting Office prior to delivery to ensure personnel will be available for receiving purposes.

3. PACKAGING AND MARKING.

a. Preservation and packaging shall be in accordance with standard commercial practice.

b. Boxes shall be marked to indicate the contract number, item number quantity, commodity, nomenclature, name of the contractor and "Mark For: FX7000. The boxes within each shipment shall be marked as to the quantity shipped (1 of 5, 2 of 5, etc).

c. In addition to the above, packaging and packing shall be as specified below:

Sweat Suit, Cadet. Sweatshirts shall be packaged as unit pack of 12 per box. Individual sweat shirts shall be a unit package of one per package. Sweat pants shall be packaged as unit pack of 12 per box. Individual sweat pants shall be a unit package of one per package.

d. Packing Lists. A packing list shall be placed within box 1 of all shipments under this contract. The packing list shall clearly identify the total contents of the shipment, and shall break down the contents of each numbered box. The contractor shall include two separate packing lists, one for the female Jackets and Parkas, and one for the male Jackets and Parkas.

4 . LABELS

(1) A removable paper ticket of commercial quality, reflecting the Cadet Store stock number, size, and a brief description in either code 39 or UPC bar code format shall be affixed to each garment as identified within the applicable specification therein. If it should become necessary to mix sizes in a shipping carton, a bar code label for each size included shall be affixed to that shipping carton.

(2) Bar Code Label must be approved before delivery of order. The bar code must have stock number, description, and quantity.

(3) A sample bar code label for one (1) each sweat shirt and one (1) each sweat pant shall be submitted for Contracting Officer approval within 10 calendar days of receipt of notice of contract award. Submittals shall be made to:

10 CONS/LGCB

Attn: Contracting officer 8110 Industrial Drive, Suite 200 USAF Academy, CO 80840-2315

(4) See Attachment 2 for sample of bar code 39 label

5. MASTER PATTERNS. A master paper pattern for the sweat shirts and sweat pants will be sent to the contractor at the time of award, if required. The contractor shall make working patterns by grading up and down from the master pattern. Any proposed changes in the master pattern shall be forwarded to the Contracting Officer for approval prior to use by the contractor. Along with any proposed changes, the contractor shall substantiate or justify the benefit of the proposed pattern change and the amount of monetary reimbursement required for recommending pattern revisions and development of pattern changes as required, to maintain uniformity of the Cadet Wing. Upon approval, a copy of the modified part of the pattern shall be submitted by the contractor to the Contracting Officer. Any change to the master pattern (other than grading) for the sweat shirts and sweat pants shall be incorporated into a contract modification.

6. INSPECTION. Inspection and acceptance will be accomplished by the Cadet Store Officer or his/her authorized representative as the technical representative for the Contracting Officer for the purpose of technical surveillance of workmanship and conformance with garment specifications.

7. Inspection of all garments will be in accordance with ANSI standards, see www.ansi.org for additional information.

8. Links for Commercial standards:

http://www.astm.org/ http://web.ansi.org/ http://www.standardsglossary.com/iso1.htm http://www.iso.org/iso/home.htm http://www.complianceonline.com/

9. Clarifying information provided in specs for document location.

From our Specs:

Copies of specifications, standards, drawings, and publications required by contractors in connection with specific procurement functions should be obtained from the procuring activity or as directed by the Contracting Officer.

2.1.2 Other Government drawings. The following Government drawings form a part of this specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those in effect on the date of the invitation for bids or request for proposals.

(Copies of Forest Service drawings are available from USDA Forest Service, Missoula Technology and Development Center, Building 1, Fort Missoula, Missoula, MT 59804-7294.)

2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those in effect on the date of the invitation for bids or request for proposal.

AMERICAN SOCIETY FOR QUALITY CONTROL (ASQC)

ANSI/ASQC Z1.4-1993 - Sampling Procedures and Tables for Inspection By Attributes (Copies are available from the American Society of Quality Control, 611 East Wisconsin Ave., Milwaukee, WI 53202.)

ATTACHMENT 1-SWEAT SUIT DESCR

UNITED STATES AIR FORCE ACADEMY

PURCHASE DESCRIPTION 185

10LGR/LGRI

SWEAT SUIT, CADET

20 January 2010

UNITED STATES AIR FORCE ACADEMY PURCHASE DESCRIPTION

I. SWEAT SUIT, CADET

A. Scope

This purchase description covers a two-piece silver gray sweat suit in a heavy weight cotton/polyester fabric; to be worn by cadet personnel at the United States Air Force Academy, see Figure 3 & 4.

B. First Article

Before production is commenced the contractor shall submit to the contracting office for quality control evaluation approval a First Article. One sweatshirt size large (L), and one pair of sweat pants size large (L) complying with the salient characteristics described in this purchase description, shall be submitted to the contracting office for evaluation after the awarding of the contract and prior to the beginning of production. The First Articles shall be constructed, in the requested color and fabric as described by this purchase description. First articles may be tested for compliance to this specification.

II. SWEAT SHIRT

A. Fabric

Base Sweatshirt Fleece Fabric - Extra heavy 90 % preshrunk cotton, 10% polyester, reverse weave, sweatshirt fleece. Fiber blend may vary with +5% in either the cotton percent or polyester %, with the understanding that the variance shall be +5%, only. Variation of weight may range from 11.0 to 12.0 oz per square yard. These variations are acceptable with the understanding that the minimum weight shall be 11. oz per square yard. Shrinkage may not exceed 6%.

Note: The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

Rib Knit Fabric - The rib trim is 1 X 1 cotton/polyester or cotton/nylon. Due to fabric manufacturing, the variation is from 90%/10% to 99%/1% cotton polyester or cotton/nylon;

either one is acceptable. Up to 10% spandex is acceptable as long as cotton content is at least 90% of composition.

B. Thread

A three ply thread made of 90% cotton, 10% polyester shall be used. Alternately, two-ply polyester cord, polyester wrapped or 100% spun polyester will be acceptable.

C. Design

1. Hood: The hood shall be a double thick attached hood made of ribbed material with brass grommets for a drawstring. The drawstring shall be 60 inches long, 100% cotton, rounded of appropriate weight with a white barrel lock to hold it in place.

2. Sleeves: The Sweat shirt shall have set in sleeves.

3. Cuffs/Waistband: The shirt shall have ribbed cuffs, waistband, and action side inserts. The rib trim is 1 X 1 cotton/polyester or cotton/nylon. Due to fabric manufacturing, the variation is from 90%/10% to 99%/1% cotton polyester or cotton/nylon; either one is acceptable. Small amounts of spandex content are acceptable.

4. Muff Pockets: The muff pockets will vary among shirt sizes. The large size muff pocket shall be 15" at the bottom, 12" at the top, 10" high, and 7" opening, with a +¼" tolerance on any measurement, see figure 1. The contractor shall grade the size of the pocket according to Table 1 below.

Table I Cadet Muff Pockets Finished Measurements

Measurement S M L XL XXL XXXL Bottom of pocket Tolerance: +1/2"

14" 14" 15" 17" 18" 20"

Top of pocket Tolerance: +1/2"

11" 11" 12" 13" 14" 15"

Height Tolerance: +1/2"

10" 10" 10" 11" 12" 13"

Opening Tolerance: +1/4"

7" 7" 7" 8" 9" 10"

5. Silk-Screening: Lettering shall be screen printed into the garment with silver gray light retro-reflective ink. The letters shall be block style letters 4" in height and 13 ½" long, measured at the bottom of the letters. The letters shall be centered on the front of the shirt +3/8", see Figure

1. The chevron design on the back shall be screen printed into the garment with silver gray light retro-reflective ink. The width of the chevron shall be 2" wide, and shall be placed to scale with a gap 1/8" to 5/8" from the top of the shoulder, see Figure 2. The retro-reflective stripe shall not go into the sleeve seam. The ink shall be bonded to the fabric so that reflective quality remains for the normal life of the product.

6. Color: The color shall be silver gray; also described as ash or birch.

D. Sizes:

The sizes shall be standard commercial sizes Extra Small (XS), Small (S), Medium (M), Large (L), Extra Large (XL), Extra, Extra Large (XXL), Extra, Extra, Extra Large (XXXL). For finished measurements see Table II.

Table II Cadet Sweat Shirt Finished Measurements

Measurement XS S M L XL XXL XXXL Chest (1/2) Tolerance: +1/2"

23 ½ 25 26 ½ 28 29 ½ 31 32 ½

Sleeve Length Tolerance: +1/2"

35 36 37 38 ½ 40 41 ½ 43

Back Length Tolerance: +1/2"

25 26 27 28 29 30 31

Across Shoulder Tolerance: +1/4"

19 ¼ 20 ¼ 21 ¼ 22 ¼ 23 ¼ 24 ¼ 25 ¼

Hood Height Tolerance: +1/4"

16 ¾ 17 17 ¼ 17 ½ 17 ¾ 18 18 ¼

Hood Width

10 10 ½ 11 11 ½ 12 12 ½ 13

Measuring: All measurements shall be done with the garment laying flat on a surface.

1. Chest: Measure across the front of the sweatshirt level with the underarm area.

2. Sleeve Length: Measure from center back, around the neck, across shoulder, down the sleeve to include the cuff.

3. Back Length: Measure from center back down to the bottom hem, to include the rib waistband.

4. Across Shoulder: Measure from one side of the armhole seam, along the shoulder seam, across the neck, to the other armhole seam.

5. Hood Height: Fold hood in half and measure at front of the hood, starting from bottom to the top.

6. Hood Width: The hood width shall be measured 7" down the top, front of the hood when folded.

III. SWEAT PANTS

A. Fabric

Extra heavy 90 % preshrunk cotton, 10% polyester, reverse weave, sweatshirt fleece. Fiber blend may vary with +5% in either the cotton percent or polyester %, with the understanding that the variance shall be +5%, only. Variation of weight may range from 11.0 to 12.0 oz per square yard. These variations are acceptable with the understanding that the minimum weight shall be 11oz per square yard. Shrinkage may not exceed 6%.

Note: The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract.

B. Thread

Three ply thread made of 90% cotton, 10% polyester shall be used. Alternately, two-ply polyester cord, polyester wrapped or 100% spun polyester will be acceptable.

C. Design

1. Waistband: The sweat pants shall have an elastic waistband with a drawstring cord with a barrel lock. The drawstring opening shall be enforced using brass grommets. The drawstring shall be 100% cotton of appropriate weight shall be at least 60" long. The barrel lock for the waist drawstring shall be white plastic, adjustable, and shall prevent the drawstring from pulling into the waist tunnel. The leg bottoms shall also have elastic bottoms. The width of the elastic waistband shall be 1-1/2" wide.

2. Crotch: The sweat pants shall have an extended crotch gusset. The gusset shall be 3-1/4" in width and 8" in length, with a tolerance of 1/4".

3. Hems: The pants shall have elasticized leg bottoms with the elastic being ½" wide.

4. Silk-Screening: The inverted chevron design on the lower half of the leg will be silk-screened with silver gray light retro-reflective ink and shall be 2” wide. The silk-screening shall be placed approximately 10" up from the bottom of the leg +3/8". The point of the chevrons shall be in the center front and center back of the leg. The distance from the point of the chevron to the bottom shall be 8" + ¼". The stripe shall be aligned at the inseam + ¼". See figures 3 and 4. The outside leg needs to be a continuous screening. The ink shall be bonded to the fabric so that reflective quality remains for the normal life of the product.

5. Color: Color shall be silver gray.

D. Sizes

1. Sizes shall be standard commercial sizes Extra Small (XS), Small (S), Medium (M), Large (L), Extra Large (XL), Extra Extra Large (XXL) and Extra Extra Extra Large (XXXL). For finished measurements see Table III.

Table III

Cadet Sweat Pants Finished Measurements

Measurement S M L XL XXL XXXL Waist Relaxed (1/2) Tolerance: +1/2"

13 14 15 16 18 20

Hip/Seat (1/2) Tolerance: +1/2"

21 22 23 25 26 27

Thigh (1/2) Tolerance: +1/2"

13 14 15 16 17 18

Inseam Tolerance: +1/2"

30 32 33 34 36 38

Bottom (1/2)

5 5 ¾ 6 ½ 7 ¼ 8 9

Measuring: All measurements shall be done with the garment laying flat on a surface.

1. Waist Relaxed: Fold pants in half at the side seams and measure ½ of waist.

2. Hip/Seat: Measured with the pants folded in half at the side seams, 10" from the top of the waistband.

3. Thigh: The thigh shall be measured at the leg area of the pants. Fold pant in half at the side seams and measure, 1" below the extended gusset found at the crotch area.

4. Inseam: The inseam shall be measured from the lower edge of the seat seam at the extended gusset, to the bottom leg hem, (The gusset is not measured).

5. Bottom: The bottom of the pants shall be measured relaxed with the pants folded in half at the side seams.

IV. OTHER REQUIREMENTS

A. Instruction Label

1. Standard labels shall be placed in all garments giving size, care instructions and manufacturer name. A Code 39 bar code label shall also be affixed to the individual garment package. The Code 39 bar code shall be a removable paper ticket of commercial quality with the USAFA 10ABW/LGLC stock number and Code 39 bar code. The paper ticket shall contain a short item description to include size in plain text.

B. Patterns.

A master pattern in size medium will be furnished by the Government. The patterns provide for a 3/8” seam allowance for all seams unless otherwise specified here-in. The standard patterns shall not be altered in any way, and are to be used as a guide for cutting the contractor’s working patterns. The working patterns shall be identical to the standard pattern. The contractor shall have the ability to develop and grade working patterns to all sizes required by the procuring activity.

C. Regulatory Requirements

The contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).

1. Flammability Requirements: The basic material shall conform to the rules and regulations of the Flammable Fabrics Act without the application of a flame retardant finish to the material or to the end item.

2. Workmanship: The finished Sweat suit outfit shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractor’s own quality assurance standards and the quality assurance standards defined by this purchase description and the technical data in the bid package.

3. Certification: The contractor shall certify that the product offered meets the salient characteristics of this description and that the product conforms to the producer’s own drawings, specifications, standards and quality assurance practices. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Reliance on contractor quality assurance systems shall not relieve the contractor of the responsibility of ensuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract.

4. Certification of Compliance: Unless otherwise specified in the contract or purchase order, certificates of compliance shall be requested by government on all components, if the government deems necessary.

5. Inspection: The contractor shall inspect the finished products 100% for compliance with this purchase description prior to submitting to the USAFA for final inspection by 10 MSG/LGRI Quality Control personnel.

6. Final Inspection: The point of final inspection and acceptance of the finished articles shall be at the USAF Academy, using ANSI/ASQC Z1.4-1993 and this purchase description.

D. Inspection Levels And Acceptable Quality Level

1. Inspection levels and acceptable quality levels (AQL’s) expressed in defects per hundred units (DHU) shall be in accordance with ANSI/ASQC Z1.4-1993. To get an accurate understanding of defects per hundred the inspector shall follow ANSI/ASQC Z1.4 Inspection Levels and it’s instructions. To obtain a copy of ANSI/ASQC Z1.4 call: American National Standard, at 1-800- 854-7179 or write to: American Society for Quality Control, 611 East Wisconsin Avenue, Milwaukee, WI 53202.

3. AQL levels and inspection levels for defects listed in Table IV and V (General and Detailed Defects, and Silk Screening Defects):

AQL INSPECTION

LEVEL LEVEL

Major 2.5 II Major and Minor A 15.0 II Major, Minor A and 40.0 II Minor B (combined)

For defects listed in Size and Measurement, Table I, II, and III:

One Class 4.0 S-3

TABLE IV. GENERAL AND DETAILED DEFECTS

MINOR

MAJOR A B

A Inferior material or workmanship defects such as distortion due to fabric manufacturing: slubs, thread breaks, holes, cuts, or any defect on the fabric attributed to the manufacturing of the fabric.

B Component and assembly - any component part or required operation omitted or not performed in accordance with specification. Includes but not limited to poor serging, stitching, and misalignment of components.

C

Defects such as holes, cuts, and or tears due to workmanship qualities or fabric quality.

D Loose thread, ends not removed, or instruction label miss printed.

E Discoloration, stains or spots due to material or workmanship

F Color not conforming to the color specified X

G Incorrect, or illegible measurements. Inspection will be scored using the Size & Measurement Table I, & II, and III.

X

H Missing Instruction Label or Code 39 Bar label. Bar code 39 not scannable and or not readable by government system

TABLE V. SILK SCREENING DEFECTS

I Alignment of USAFA, or chevrons off centered, backwards, or misaligned.

J USAFA, or chevron missing, or not conforming to

Figure 1, 2, 4, or 5.

K Smudging, or misprint such as double print, ghost images, or blurry prints

L Bad ink, thick and thin areas

E. Preservation, Packing, and Marking: The preservation, packing, and marking shall be as specified in the contract or order.

F. Source of Government Documents: Copies of military and Federal documents available from:

Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094

G. Source of non-Government Documents:

1. ASTM Test Methods: Applications for copies should be addressed to American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.

2. AATCC Test Method: Application for copies should be addressed to American Association of Textile Chemists and Colorists (AATCC), PO Box 12215, Triangle Park, NC 27709-2215.

4. Sample. For access to standard sample for shade, address the contracting activity issuing the invitation for bid.

CUSTODIAN

USAF Academy, CO 80840-8210

PREPARING ACTIVITY

Cadet Uniform, 10LGRCU

REVIEWING ACTIVITY

Flight Chief, 10LGRC Cadet Logistics Flight

12”

Figure 3.

Figure 4.

Figure 5.

ATTACHMENT 2 - BAR CODE SAMPLE

ATTACHMENT 3-BUY AMERICAN CERT

252.225-7000 Buy American Act--Balance of Payments Program Certificate.

As prescribed in 225.1101(1), use the following provision:

BUY AMERICAN ACT--BALANCE OF PAYMENTS PROGRAM CERTIFICATE

(JAN 2009)

(a) Definitions. “Commercially available off-the-shelf (COTS) item,” “domestic end product,” “foreign end product,” “qualifying country,” “qualifying country end product,” and “United States” have the meanings given in the Buy American Act and Balance of Payments Program clause of this solicitation.

(b) Evaluation. The Government—

(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American Act or the Balance of Payments Program.

(c) Certifications and identification of country of origin.

(1) For all line items subject to the Buy American Act and Balance of Payments Program clause of this solicitation, the offeror certifies that—

(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product; and

(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

(2) The offeror certifies that the following end products are qualifying country end products:

Line Item Number Country of Origin

(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

Line Item Number Country of Origin (If known)

(End of provision)

Signature Date

ATTACHMENT 4-PAST PERFORMANCE

PAST PERFORMANCE SURVEY

This attachment will not be incorporated into the resultant contract.

THIS DOCUMENT, WHEN COMPLETED IS ONLY FOR VIEW BY THE GOVERNMENT.

This survey is for the United States Air Force Academy Contracting Office.

I. CONTRACT INFORMATION:

Complete the following information on the contractor that provided or is currently providing services for your company.

Contractor’s Name: _________________________________________________________

Address: __________________________________________________________________

Telephone Number: _________________________________________________________

Point of Contact: ___________________________________________________________

Project Title or Brief Description of Work: ______________________________________*

Contract Number: ___________________________________________________________*

Contract Value Per Year: $____________________________________________________

Contract Period or Dates of Performance: ________________________________________*

*Note: If offeror holds or has held more than one contract with your agency/organization in the last 3 years, please complete separate evaluation forms for those contracts as well.

II. SURVEY RESPONDENT INFORMATION:

Complete the following information on your company. You may be contacted for additional information pertaining to the past or present performance of the contractor identified in the section above. (The following information will assist in the analysis of the data. Information will be kept confidential.)

Name of Respondent: ______________________________________________________________________________

Company/Organization: ______________________________________________________________________________

Title: Local Admistrator______________________________________________________________________________

Address: __________________________________________________________________________________________

Telephone Number: ____________________________________ Fax Number:___________________________________

Relationship and time involved with Program/Contract:

Date you completed this questionnaire:____________________________________________________________________

E-MAIL COMPLETED SURVEY FORM TO:

Brenda Smith, Contracting Specialist, brenda.smith@usafa.af.mil or if I’m unavailable, Diana South, Contracting Officer, diana.myles-south@usafa.af.mil.

III. PERFORMANCE INFORMATION:

Choose the description of the contractor’s work that best reflects their performance using the descriptions provided below.

Please provide a narrative explanation for any ratings of unsatisfactory, marginal, very good or exceptional and any other specific problems or annotations that would help us evaluate the contractor.

1 2 3 4 5

UNKNOWN

CONFIDENCE

NO CONFIDENCE LIMITED

CONFIDENCE

GOOD EXCEPTIONAL

No performance record is identifiable.i or the offeror’s performance record is so limited that no confidence assessment rating can be reasonably assigned.

Based on the offeror’s performance record, the government has no expectation that the offeror will be able to successfully perform the required effort.

Based on the offeror’s performance record, the government has a low expectation that the offeror will successfully perform the required effort.

Based on the offeror’s performance record, the government has an expectation that the offeror rwill sucessfully perform the required effort.

Based on the offeror’s performance record, the government has high expectation that the offeror will successfully perform the required effort.ii

QUALITY

1 What product did the contractor provide for your organization (i.e., items similar to sweat suits).

Comments:_____________________________________________________________________

2 Did the contractor deliver in accordance with contract schedule? Was the contractor on time, ever late, sometimes late, always late, always early:

PLEASE ANSWER ALL QUESTIONS. PLEASE PROVIDE ADDITIONAL COMMENTS FOR EACH QUESTION

3 Rate the contractors overall performance in terms of quality of service and product.

Rated:

4 Rate the contractor’s ability to plan for and execute quality control. Did the finished items show any problems that could have been avoided with good quality control? Did the contractor meet all quality control requirements stated by the specification?

SCHEDULE

5 Rate contractor’s work in relation to commonly accepted professional standards such as production techniques related to good quality of seam finishes on items previously produced. Assess the contractor’s ability to perform (timely) in accordance with contract schedule.

6 Access the contractor’s ability to provide adequate resources (manufacturing facilities, competent management staff, quality control personnel, subcontractors, etc) to support the contract effort.

BUSINESS RELATIONS

7 Did the contractor keep you informed of any problems as they occurred and suggest solutions to the problem?

8 Access the contractor’s history of reasonable and cooperative behavior (e.g., communication, positive customer service, compliance with the order/contract terms and conditions, etc.)

THE FOLLOWING QUESTION IS "YES/NO" IN NATURE:

9. QUALITY/SCHEDULE/BUSINESS RELATIONS. Based on your judgment of the contractor’s performance, would you award another contract to this contractor for the same services again? Please explain.

( ) Yes ( ) No Comments:______________________________________________________________________________________________

10. ADDITIONAL COMMENTS:

Thank you for you for completing this questionnaire.

The completed survey is to ONLY be viewed by the Government. Do not submit a copy of the completed survey to anyone other than Brenda Smith, Contract Specialist, at brenda.smith@usafa.af.mil, or Diana South, Contract Officer, at diana.myles-south@usafa.af.mil.

****FOR OFFICIAL USE ONLY, ONCE COMPLETED****

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 785 Pair

1002-SWEATPANTS

FFP

Men's sweatpants, See description: MFG IAW USAFA PD 185, Dated: 20 Jan 2010 Attachment 1).

Small: 60 pair Medium: 500 pair Large: 200 pair XLarge: 20 pair XXX-Large: 5 pair Total: 785 pair

FOB: Destination NSN: 8415-us-usa-usaf

MILSTRIP: FX70000317A005

PURCHASE REQUEST NUMBER: FX70000317A006

SIGNAL CODE: A

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0002 982 Each

1001-SWEATSHIRT

FFP

Men's Sweatshirts, See description: MFG IAW USAFA PD 185, Dated: 20 Jan 2010 (Attachment 1).

Small: 180 each Medium: 600 each Large: 200 each XXX-Large: 2 each Total: 982 each FOB: Destination

NSN: 8415

MILSTRIP: FX70000317A005

PURCHASE REQUEST NUMBER: FX70000317A005

SIGNAL CODE: A

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 06-MAY-2011 785 10 MSG LGRMC - FX7000

MITCHELL HALL ANNEX, BLDG 2351

USAF ACADEMY CO 80840

719-333-3017 FOB: Destination

FX7000

0002 06-MAY-2011 982 (SAME AS PREVIOUS LOCATION)

FOB: Destination

FX7000

CLAUSES INCORPORATED BY REFERENCE

52.209-4 Alt I First Article Approval-Government Testing (Sep 1989)

Alternate I

JAN 1997

52.212-1 Instructions to Offerors--Commercial Items JUN 2008 52.212-4 Contract Terms and Conditions--Commercial Items JUN 2010 52.219-6 Notice Of Total Small Business Set-Aside JUN 2003 52.219-28 Post-Award Small Business Program Rerepresentation APR 2009 52.222-3 Convict Labor JUN 2003 52.222-19 Child Labor -- Cooperation with Authorities and Remedies JUL 2010 52.222-26 Equal Opportunity MAR 2007 52.222-36 Affirmative Action For Workers With Disabilities OCT 2010 52.222-50 Combating Trafficking in Persons FEB 2009 52.223-18 Contractor Policy to Ban Text Messaging While Driving SEP 2010 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.232-33 Payment by Electronic Funds Transfer--Central Contractor

Registration

OCT 2003

52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

JAN 2009

252.225-7001 Buy American Act And Balance Of Payments Program JAN 2009 252.225-7002 Qualifying Country Sources As Subcontractors APR 2003 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

MAR 2008

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Past Performance (Significantly more important than cost or price consideration.)

Price

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (OCT 2010)

ALTERNATE I (APR 2002)

An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (b) through (i) of this provision.

(a) Definitions. As used in this provision:

"Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Inverted domestic corporation means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except—

(1) FSC 5510, Lumber and Related Basic Wood Materials;

(2) Federal Supply Group (FSG) 87, Agricultural Supplies;

(3) FSG 88, Live Animals;

(4) FSG 89, Food and Related Consumables;

(5) FSC 9410, Crude Grades of Plant Materials;

(6) FSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) FSC 9610, Ores;

(9) FSC 9620, Minerals, Natural and Synthetic; and

(10) FSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Service-disabled veteran-owned small business concern--

(1) Means a small business concern--

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

Veteran-owned small business concern means a small business concern--

(1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

(b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website.

(2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------.

(Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any.)

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.]

(c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern.

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern.

Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business concern.

(7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. (Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.)

(i) (Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).) The offeror represents as part of its offer that it ( ) is, ( ) is not an emerging small business.

(ii) (Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).) Offeror represents as follows:

(A) Offeror's number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or

(B) Offeror's average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts).

(Check one of the following):

Average Annual

Number of Employees Gross Revenues

___ 50 or fewer ___ $1 million or less

___ 51 - 100 ___ $1,000,001 - $2 million

___ 101 - 250 ___ $2,000,001 - $3.5 million

___ 251 - 500 ___ $3,500,001 - $5 million

___ 501 - 750 ___ $5,000,001 - $10 million

___ 751 - 1,000 ___ $10,000,001 - $17 million

___ Over 1,000 ___ Over $17 million

(9) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.)

(i) General. The offeror represents that either--

(A) It ( ) is, ( ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or

(B) It ( ) has, ( )( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted.

(ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.)

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It ( ) is, ( ) is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR part 126; and

(ii) It ( ) is, ( ) is not a joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .