Specs_Updated.pdf

1.1All items shall be "first" quality goods. Factory "seconds" will not be accepted. Design shall represent best engineering, material and technological developments to ensure durability and strength. All items will be of durable quality based on the construction types:

Type A: "Wood Veneer on minimu m of Hardwood Veneer-core Plywood"

Tvpe B: "Solid Hard Wood (Oak, Ash, Maple or Beech)''

Type C: "Plywood corpus with laminated Top"

Note: Particle Boa rd or medium density fiberboard (MDF) are NOT acceptable substitutes.

1.2 Each item descript ion provides dimensions. Dimensions referring to given commercial standards, i.e. bed frame sizes with corresponding mattress sizes need to be fully adhered to, or with variations not greater than l" /2.5 cm to ensure items fit with associated corresponding items. For aJI other furnishing items a tolerance of 1"/ 2.5 cm is acceptable only in order to meet a company's commercial product already on market, provided this change is not reducing the functionality or use along with corresponding items unless otherwise stated.

2. Materials and Finishes:

Use of hardwoods such as Oak, Beech, Ash and Maple is required. All sollwoods such as Pine or rai n forest species are not acceptable. All wood shall be kiln-dried to a moisture content of 5- 10%. All exposed wood parts shall be clear cutting and free of knots, splits, or checks. Interior wood parts shall be of suitable hardwoods free of any defects that may affect the structural integrity of the furni ture. All internal framing shall be constructed from selected mixed hardwoods. The furniture finish shall be a multi-coat formulation, premium grade for filled grained woods. Steam bent wood parts shall be of species suitable for bendjng and if exposed shall have grain and finishing characteristics similar to other exposed wood parts. Laminates shall be matte-finish, high-pressure plastic laminate. Laminate color shall match the wood species and color.

3. Fabrication:

No fiberboard, particleboard, medium density fiberboard or hardboard (MDF), shall be used in any part of the furniture or in any plywood component. Exterior surfaces and exposed interior surfaces shall be solid hard wood or hard wood veneer. All framing materials shall be solid hard wood. All joints must be stronger than the substrate itself and must resist racking and withstand loading. Lamination shall consist of planks no less than 19 mm (3/4") or more than 100 mm (4") in width. Any other edges or borders require minimum 2mm thjck ABS (Acrylnitril-Butadien- Styrol) plastic to be heavy wear and tear resistant. All materials used shall be free from defects which would adversely affect the performance or maintainability of individual components or of the overall assembly. Materials not specified herein shall be of the same quality used for the intended purpose in commercial practice . Unless otherwise specified herein, all equipment, material, and articles incorporated in the work covered by this specification are to be new and fabricated using materials produced from recovered materials to the maximum extent possible without jeopardizing the intended use. The tenn "recovered materials'' means materials which have been collected or recovered from solid waste and reprocessed to become a source of raw materials, as opposed to virgin raw materials (e.g. recycled steel). Unless otherwise specified, none of the above shall be interpreted to mean that the use of used or rebuilt products is allowed under this specification. Other fabrication requirements follow:

4. Tables:

All tables shall be constructed of premium grade material, unless otherwise specified . All table frame joints shall be secured with glue and double doweled, unless otherwise specified. Wood dowels shall be multi-grooved and kiln-dried lo a moisture content of 10% or less. All frames shall be reinforced with comer blocks, glued and screwed to the frame. The top of the table shall be joined to the frame with screws and glue blocks. Any top must be able to handle moving of the furniture that will be accomplished by lifting the piece by the top. Adhesives used for laminating panels and assembly shall conform to industry standards. All exposed edges shall be rounded (ABS). For removing table legs no tools shouJd be required; wing nuts screws shall be used.

5. Plastic Gliders \II legs of furnishings or pa11s touching the ground shall have plastic gliders scrcv.ed on the bottom in correspondence of the weight/size of the item.

6. TABLE ACTIVITY WOOD:

OccasionaJ table top.

Material Type C

6.1 TABLE WOOD SQUARE

Square occasional table with frame and 4 legs Type B (solid hard wood) Dimensions: 30" I 76.2cm Height X 30" I 76.2cm Length X 30" I 76.2cm Width

7.... . CHAIR DINING:

Stackable chairs (up to 6 each), solid hard wood (Type 8) with rounded edges Chair style need to correspond to dining table. Upholstery shall not be damaged by stacking chairs. Maximum wdght 7kg.

7.1 CHAIR DINING

Dimensions: 35" I 88.9cm Height (chair scat height is 18" I 45.7cm) X 18"I 45.7cm Length X 18"I 45.7cm Width Solid Wood only - NO UPHOLSTERY MATERIALS COLOR options on wood color to be determined I selected and specified in each Delivery Order.

8. LOUNGE SOFA THREE SEATS UPHOLSTERED:

Fully upholstered design with soft lines and rounded arms. Interior construction shall be robust.

Interiors shall be of solid hard wood with steel no-sag springs to withhold heavy duty usage of the seating element. Seat rears and side upholstered cushions need to be reversible with Zipper and Velcro Straps allowing replacing or cleaning I easy maintenance. All upholstery/ cushion parts will require affixing mechanisms to stay in position when used. Upholstery/ cushion parts are interchangeable and will fit easy lounge scat, 2 and 3 easy seat couches. Upholstery color TBD via Delivery Order. Option of soft/med/firm density foam TBD via Delivery Order.

'vla\imum 751-.g

8.1 LOUNGE SOFA THREE SEATS UPHOLSTERED

Dimension :36"I 91.4cm Height X 89" I 226. lcm Width X 35" I 89cm Length UPHOLSTERY MATERIAL: Leather substitute I Vinyl COLOR Options for upholstery to be determined I selected and specified in each Delivery Order as well as option of soft/med/firm density foam.

9. LOUNGE SOFA TWO SEATS UPHOLSTERED:

Pully upholstered design with soft lines and rounded arms. Interior construction shall be robust.

Interiors shall be of solid hard wood with steel no-sag springs to withhold heavy duty usage of the seating element. Seat rears and side upholstered cushions need to be reversible with Zipper and Vclcro Straps allowing replacing or cleaning I easy maintenance. All upholstery/ cushion parts will requi re affixing mechanisms to stay i n position when used. Upholstery/ cushion parts are interchangeable and will lit easy Jow1ge seat, 2 and 3 easy seat couches. Upholstery color TBD via Delivery Order. Option of soft/med/firm density foam TBD via Delivery Order.

Maximum 60 kg

9.1LOUNGE SOFA TWO SEATS UPHOLSTERED

Dimension : 36" I 91.4cm Height X 65" I 165.lcm Width X 35" / 89cm Length UPHOLSTERY MATERJAL: Leather substitute I Vinyl COLOR Options for upholstery to be determined I selected and specified in each Delivery Order as well as option of soft/med/firm density foam.