FA5613-16-R-0022_Dorm_Furniture.doc

Section SF 1449 - CONTINUATION SHEET

Slat Bed.

FFP

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures. The dorm furniture pieces shall be delivered to:

86 CES/CEHF

Kaiserstrasse

Einsiedlerhof Air Station

Bldg 741

67661 Kaiserslautern

FOB: Destination

PURCHASE REQUEST NUMBER: F3N0526103A003

SIGNAL CODE: A

NET AMT

See Exhibit A

PSC Code: 7105

Storage Headboard.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

See Exhibit B

Twin Mattress

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Writing Desk.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Desk/Dining Chair.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

2 Drawer Chestwith DVD Shelv.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

4 Drawer under bed storage and filler bo

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Activity Table.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Chaise Recliner.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Single Bed Loft.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

Desk.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

3 Drawer Chest.

For detailed description of all dorm fruniture pieces listed in CLINs 0001 through 12, see Exhibit A, Description and Exhibit B, Pictures.

FOB: Destination

NET AMT

EXHIBIT A, DESCRIPTION

- 96.5cm x 203.5cm x 50cm high

DESCRIPTION:

- 50mm X 30mm metal tubular perimeter frame with 14 arched multi-layer wooden slats set into metal tube with rubber end caps. Four elastic retaining belts are interwoven between slats. Legs are 50mm in diameter x 45cm long with plastic end caps. Legs screw into metal corner gusset plates welded to the tubular frame.

HARDWARE:

- Headboard fixing brackets (2 ea)

FINISH:

- Black

MATERIAL:

Top Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” 45lb. particle board core.

Internal edgebanding:

1 Long – 3/4” x 3” Solid Birch 2 Short – 3/4” x 7/8” Solid Birch 1 Long – 3/4” x 1/8” Solid Birch Sides: 3/4” Birch Veneer Plywood with solid Birch veneer edgebanding Back: 3/4” Birch Veneer Plywood Bottom: 3/4” Birch Veneer Plywood Top Spreader: 3/4” Solid Birch Bottom Spreader: 3/4” Solid Birch Door: 3/4” Birch Veneer Plywood with 3mm solid Birch edgebanding around perimeter Door Hinges: 2-1/2” Black metal inset heavy duty hinge Door Catch: Magnetic Door Pull: 96 MM Black metal curved pull Floor Glides: Nylon to prevent rusting and marking of floors.

CONSTRUCTION:

Sides are screwed to the top, bottom, and back utilizing ¾” x ¾” hardwood cleats. Top and bottom spreaders at the door opening are pocket screwed to the sides. Back shall be fitted into dado grooves cut along the back of the sides and securely screwed in place. Door hinges shall be thru-bolted to the door and sides.

FINISH:

Finish materials shall be of best quality to give hard durable smooth, liquid resistant finish. All surfaces exposed to view in normal use shall be smoothly machined and sanded. The application of finishing materials shall be controlled to produce items of uniform finish without sags, runs, orange peel, overspray or other defects detrimental to a smooth quality appearance. Finish shall be UV cured urethane and/or water base acrylic. Finishing process shall be environmentally friendly and emit no V.O.C.’s (Volatile Organic Compounds) into the atmosphere.

Stain Color:

Wild Cherry

- Long 38" x 80". innerspring unit shall consist of no less than 364 coils. Not less than 12 3/4 gauge tempered high carbon steel wire and height of 5". No less than three active turns per coil. Transverse rows of coils shall be connected by bonnell wires, running at right angles to the long axis of the unit. there shall be a border wire of not less than 6 gauge high carbon steel around the entire perimeter of the top and bottom surfaces of the unit, attached to each outside coil with high carbon spring wire helical. Insulators the entire area of the top and bottom surfaces shall be covered with a heavy duty polyester insulator pad no less than 5/8" thickness.

Filling and Upholstery:

- The top and bottom surfaces each shall have distributed equally over them not less than six pounds per side of boric acid treated cotton batting felt, which shall be wrapped around border wire. the mattress shall contain a total of nine pounds of boric acid treated cotton batting felt not including the corners, which is to be an amount adequate to support the border ticking, in addition, there shall be one polyurethane foam topper later that will be not less than 1/2" in total thickness.

Flange:

- Flange material of not less than 5 1/2" width and adequate to properly secure mattress panels to the innerspring unit by hog ringing every other coil around the entire mattress perimeter of both surfaces.

Border: There shall be a prebuilt, one piece border vertically stitched, at maximum intervals of 2 " to cellular polyethylene not less than 5" wide and 5/32" thick. Ticking:

- The ticking shall be a contract blue damask cover quilted to not less than 1/2" medium density foam. Each top and border panel shall be of one piece (no seams), and shall be double stitched to the pre-built border with not less than 78" wide binding tape.

Machine stitching:

- Machine stitching shall be done with synthetic fiber thread at a rate of not less than 8 stitches to the inch.

Color:

- Blue Damask

- Width 42" Depth 19-13/16" Height 29-3/4" MATERIAL:

- Curved Top Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” 45lb. particle board core.

Internal edgebanding: Front – 3/4” x 4” Solid Birch Sides: 3/4” x 7/8” Solid Birch Back: 3/4” x 1/8” Solid Birch

-Sides:1-1/4” Birch Veneer Plywood with 1” x 1-3/4” Solid Birch trim pieces along front and back edges. Sides also have a solid birch horizontal trim piece along the bottom of the panel

- Frames: Four sided Hardwood with glued and stapled half lap joints

- Aprons: 3/4” Birch Veneer Plywood with Birch veneer edgebanding

- Modesty Panel: 3/4” Birch Veneer Plywood

- Keyboard Tray: 3/4” Birch Veneer Plywood with solid Birch veneer edgebanding on front and sides. Front edge of keyboard tray has a 7/8” x 3” solid Birch shaped wrist rest.

- Keyboard Slides KV #8357-16” metal runners with undermount shelf tabs and hold-open feature. Tested to 50,000 cycles with a 75lb dynamic load rating.

- Runners Supports 3/4” x 4-1/4” Solid Hardwood

- Floor Glides Nylon to prevent rusting and marking of floors.

- Support Bar 3/4” x 3/4” x 30” long steel bar

CONSTRUCTION:

- Sides shall be joined using internal hardwood four-sided frames above and below the drawer, screwed to the sides. The modesty panel shall also be screwed to the sides using 3/4" x ¾” x 10” long hardwood cleats. Front aprons and hardwood runner supports are screwed to the frame structure.

The modesty panel has a wire access hole in back of the keyboard tray.

The top is secured to the top hardwood frame with screws. A 3/4” x 3/4” x 30” long steel support bar is screwed to the top for reinforcing along the front edge..

FINISH:

- Finish materials shall be of best quality to give hard durable smooth, liquid resistant finish. All surfaces exposed to view in normal use shall be smoothly machined and sanded. The application of finishing materials shall be controlled to produce items of uniform finish without sags, runs, orange peel, overspray or other defects detrimental to a smooth quality appearance. Finish shall be UV cured urethane and/or water base acrylic. Finishing process shall be environmentally friendly and emit no V.O.C.’s (Volatile Organic Compounds) into the atmosphere.

- Wild Cherry

- Dinning chair w/ Upholstered Seat

DIMENSIONS

- Back Height 34-1/2"

- Depth 19”

- Seat Height 19-1/2"

- Seat Size 18”W x 17-1/2DP”

MATERIAL

- Rear Uprights 1-1/4” x 1-1/2” Solid Wood

- Front Legs 1-1/4” x 1-1/2” Solid Wood

- Front Seat Frame Rail 3/4” x 2” Solid Wood

- Curved Seat Frame 1” x 2” Curved formed plywood

- Front Stretcher 3/4” x 3/4” Solid Wood

- Curved Stretcher 3/4” x 3/4” Curved plywood

- Top Seat Back Slat 3/4” x 3-1/8” Solid Wood (curved)

- Seat Back Slats 3/4” x 1-3/8” Solid Wood (curved)

CONSTRUCTION

- All joints are double dowelled where possible or mortised for added strength and stability. The curved plywood seat frame is bolted through the rear uprights and mortised into the front legs. The front seat frame rail is also mortised into the front legs. Solid wood corner blocks are glued and screwed into the curved plywood seat frame and the front seat frame as well as lag bolted to the front legs. A one piece curved plywood stretcher is screwed into the rear uprights and front legs. Seat back slats are fully mortised into the back posts. Upholstered seat is made of a 3/4" plywood base, a 1-1/2" layer of foam, and a fabric cover.

FINISH

- Wild Cherry

FABRIC

Absecon crypton, Suite Series 1

Width 39-1/2" X Depth 24" X Height 36"

MATERIAL:

Curved Top Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” 45lb. particle board core.

Internal edgebanding: Front – 3/4” x 4” Solid Birch Sides – 3/4” x 7/8” Solid Birch Back – 3/4” x 1/8” Solid Birch Sides 3/4” Birch Veneer Plywood with 1” x 1-3/4” Solid Birch trim pieces along front and back edges. Sides also have a solid birch horizontal trim piece along the bottom of the panel Frames Four sided Hardwood with glued and stapled half lap joints Back 1/4” Wild Cherry Hardboard (2 Sided) Curved Fixed Shelf Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” plywood core. Bullnosed edgebanding is matching PVC T-Moulding.

Adjustable Shelf Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” plywood core. Edgebanding is 3mm matching PVC. Bottom shall have recesses for adjustable shelf supports.

Drawer Fronts 3/4” Birch Veneer Plywood with solid Birch veneer edgebanding Drawer Sides 7/16" x 6-1/2”h x 16”dp Birch Multi-ply Drawer Back 7/16" x 6-1/2” Birch Multi-ply Drawer Bottom 1/4" Wild Cherry Hardboard Drawer Slides 16” Brown epoxy metal runners with Teflon ball bearing wheels tested to 50,000 cycles – 75lb dynamic load rating.

Floor Glides Nylon to prevent rusting and marking of floors.

Drawer Pulls 96 MM Black metal curved pull

CONSTRUCTION:

Sides shall be joined using internal four-sided frames. Frames shall be placed at the top and bottom of the case and fastened to the sides and top with screws.

Back shall be fitted into dado grooves cut along the back of the sides and securely screwed in place. Back shall have a large cut-out for routing wires and ventilation.

Top shall be butt-jointed to the sides and fastened with screws through the front and back of the upper frames. Top shall have a load capacity of 300lbs.

Drawer boxes shall be finger dovetailed at the front and back with the bottom fastened into dado grooves on the front, sides and back. Dove-tails shall be tight and well fitted. Drawer fronts shall have screw-on drawer pulls.

FINISH:

Finish materials shall be of best quality to give hard durable smooth, liquid resistant finish. All surfaces exposed to view in normal use shall be smoothly machined and sanded. The application of finishing materials shall be controlled to produce items of uniform finish without sags, runs, orange peel, overspray or other defects detrimental to a smooth quality appearance. Finish shall be UV cured urethane and/or water base acrylic. Finishing process shall be environmentally friendly and emit no V.O.C.’s (Volatile Organic Compounds) into the atmosphere.

Wild Cherry

Tops Plastic laminate, Wilson Art 7054-60 and balanced backer on a 3/4” 45 lb particle board core with matching 3mm PVC edgebanding.

Sides 3/4” Birch Veneer Plywood with solid birch veneer edgebanding.

Center Dividers 3/4” Birch Veneer Plywood with solid birch veneer edgebanding.

Backs 1/4” Wild Cherry Hardboard Frames Four sided Hardwood with glued and stapled half lap joints Base Front 3/4” Solid Birch Drawer Fronts 3/4” Birch Veneer Plywood with solid Birch veneer edgebanding Drawer Sides 7/16" x 5-1/2”h x 20”dp Birch Multi-ply Drawer Backs 7/16" x 5-1/2” Birch Multi-ply Drawer Bottoms 1/4" Wild Cherry Hardboard Drawer Slides 20” Brown epoxy metal runners with Teflon ball bearing wheels tested to 50,000 cycles – 75lb dynamic load rating.

Floor Glides Concealed casters (non-locking) Drawer Pulls 96 MM Black metal curved pull. Inserted into wood. Not to protrude out more then 1/4"

CONSTRUCTION:

Unit consists of a four drawer underbed storage unit on casters and a fixed filler box on one end. The sides of both units are constructed with four sided hardwood frames at the top and bottom, screwed to the sides.

The solid Birch base front on the drawer unit is also screwed to the sides. The back shall be fitted into dado grooves cut along the back of the sides and securely screwed in place.

Tops Shall be butt-jointed to the sides and fastened with screws through the front and back of the upper frames.

Drawer boxes shall be finger dovetailed at the front and back with the bottom fastened into dado grooves on the front, sides and back. Dove-tails shall be tight and well fitted. Drawer fronts shall have screw-on drawer pulls.

FINISH:

Finish materials shall be of best quality to give hard durable smooth, liquid resistant finish. All surfaces exposed to view in normal use shall be smoothly machined and sanded. The application of finishing materials shall be controlled to produce items of uniform finish without sags, runs, orange peel, overspray or other defects detrimental to a smooth quality appearance. Finish shall be UV cured urethane and/or water base acrylic. Finishing process shall be environmentally friendly and emit no V.O.C.’s (Volatile Organic Compounds) into the atmosphere.

Stain Color:

Wild Cherry

DIMENSIONS:

Width 68-3/4" Depth 24-1/8" Height 16-9/16"

Solid wood legs.High pressure plastic laminate on plycore for the top.

Color:

Wild Cherry Size:

30"W X 30" L X 30"H

Pillow top arms with decorative stitching on the padded headrest. Arm Height: 26", Back Height: 27". Seat Dimensions: 20w x 22d x 19h. Extended Length of Recliner when fully reclined: 72". Will Require approximately 11" of space from the wall when fully reclined. Sinuous Springs. All-steel mechanism. Kiln dried hardwood frame is double doweled, glued, and reinforced with steel at all stress points. 1.8 Poly Density Foam. Recliner can be closed hands-free. Seats and backs are heavily padded for comfort. Upholstery must holds up to more than 15,000 double rubs. Unlimited reclining positions.

Color: Java Size: W35 x D38 x H39.

42" X 24" x 30" Height

Pedestal Desk with keyboard drawer, pedestal on left side.

Solid Oak

Solid Oak

SHIPPING/HANDELING WILL BE INCLUDED IN THE UNIT PRICE.

MUST CHECK QUANTITY PER FREIGHT (Door to Door) SHIPMENT.

ALL DELIVERIES MUST BE COORDINTED WITH Mr. ADRIAN ROTH AT 00 49 631 536 0122 or

Mr. RUI SILVA AT 00 49 631 536 7578.

The Items Number: #0010, #0011, #0012 are Back Up Stock for the Furniture Series: #2200

Series: # 2200 - Grade: 01 - Solid Oak Construction with solid oak end panels and drawer fronts, and 5/8" drawer stock. Tops are matching woodgrain plastic laminate with PVC edgebanding. Drawer fronts are solid oak style #1020 double beaded with plunge pulls. Natural Finish

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

CERF

BLDG 521, BOX 290

D-66877 RAMSTEIN

FOB: Destination F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

F3N052

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

ADDENDUM TO 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (OCT 2015)

This addendum replaces the below referenced paragraphs of clause 52.212-1 Instructions to Offerors -- Commercial Items as follows. Offerors are cautioned to follow the instructions contained herein exactly. Please read the entire addendum carefully. Failure to meet a requirement may result in an offer being ineligible for award. All submissions must be legible, i.e. product literature in font size no smaller than 10 pitch.

Paragraph (b), Submission of offers, is changed as follows:

Paragraph (b) (2) The time specified in the solicitation for receipt of offers--

(i) Completed offers must be received no later than 16:00 Central European Time (CET) on 01 June 2016. Offerors may verify receipt of their proposal with the contracting Point of Contact (POC) Ms. Svetlana Allendorf either via email: svetlana.allendorf.ru@us.af.mil or via phone: 0631-536-6885.

(ii) Delivery Methods: Offers shall be emailed to:

A. Email: svetlana.allendorf.ru@us.af.mil Paragraph (b) (4) Technical Description – Product Literature--

Offeror shall meet all salient characteristics identified in Exhibit A. Offeror shall provide pictures of furniture pieces offered. Submission must include manufacturer’s product brochure and/or any other documentation addressing compliance with each specification listed on the Exhibits A of the Request for Proposal (RFP). Offeror’s are cautioned to only submit relevant information.

Paragraph (b) (6) Price-- Offerors shall insert a unit price and extended total amount for each CLIN they are offering on as listed in the price schedule of the solicitation.

All prices shall be submitted in EURO or US Dollar currency. Offers not submitted in EURO or US Dollar currency will not be considered for award.

Paragraph (b) (8) Representations and Certifications--

Offerors are required to complete the provisions for Representations and Certifications at 52.212-3 Alternate I or at SAM website with all appropriate blocks filled-in, as well as the clause 252.229-7001, Alt I Tax Relief.

Paragraph (b) (11) SF1449-- The offeror’s proposal shall include a copy of the SF 1449. Offerors are required to complete in its entirety blocks 17a and 17b (if applicable). The SF 1449 need to be signed in blocks 30a,b, and c.

(m) The acquisition procedures to be used for this acquisition will be IAW FAR Part 13.5, Test Program for Certain Commercial Items.

(n) All questions regarding this Request for Quote are due in writing by 16:00pm CET, 25 May 2016. Questions shall be submitted via email to svetlana.allendorf.ru@us.af.mil. The Government has no obligation to answer any questions received after the due date and time.

(o) Offerors are cautioned that all required proposal information must be received by the proposal due date and time as shown in block 8 of the RFQ, SF1449, or the proposal may be considered non-responsive, and may not be considered or evaluated.

(End of provision)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a purchase order resulting from this Request for Proposal (RFP) to the responsible offeror whose offer conforming to the RFP will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) TECHNICAL CAPABILITY. Technical acceptability is based on successfully meeting all salient characteristics identified in Exhibit A of this RFP. Offerors shall meet all salient chracterisitics listed in Exhibit A to be rated “Acceptable” as indicated in the chart below:

Table 1 Technical Acceptable/Unacceptable Ratings Chart

Offerors must have an “Acceptable” rating in order to be considered for further evaluation.

(ii) PRICE. Prices will be evaluated for fairness and reasonableness IAW FAR 13.106-3. Arithmetic Discrepancies: For the purpose of evaluation of offers, the following will be utilized in resolving arithmetic discrepancies found on the face of the bidding schedule as submitted by the offeror.

A. Obviously misplaced decimal points will be corrected;

B. Discrepancy between unit price and extended price, the unit price will govern;

C. Apparent errors in extension of unit prices will be corrected;

The totals calculated by resolution of arithmetic discrepancies listed above will represent the total proposed price or total price per group, as applicable.

(iii) Award Process. The evaluation process will be as follows:

A. All proposals will be evaluated for technical acceptability;

B. All proposals rated technically acceptable will be evaluated for price reasonableness. Award would be made to Offeror with the lowest priced technically acceptable offer.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (APR 2016) ALTERNATE I (OCT 2014)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management (SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (r) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation.

“Small disadvantaged business concern, consistent with 13 CFR 124.1002,” means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

“Subsidiary” means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

“Veteran-owned small business concern” means a small business concern—

(1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

“Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

“Women-owned small business concern” means a small business concern --

(1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

“Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127),” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.

(b)

(1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the SAMwebsite.

(2) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___ . [Offeror to identify the applicable paragraphs at (c) through (q) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a small business concern.

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a service-disabled veteran-owned small business concern.

(4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002.

(5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.]The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold.

(6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ___ .] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that—

(i) It [ ___ ] is, [ ___ ] is not an EDWOSB concern, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate for each EDWOSB concern participating in the joint venture. [The offeror shall enter the name or names of the EDWOSB concern and other small businesses that are participating in the joint venture: ___ .] Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation.

(8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [ ___ ] is, a women-owned business concern.

(9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:

(10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material changes in ownership and control, principal office, or HUBZone employee percentage have occurred since it was certified in accordance with 13 CFR part 126; and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for each HUBZone small business concern participating in the HUBZone joint venture. [The offeror shall enter the names of each of the HUBZone small business concerns participating in the HUBZone joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall submit a separate signed copy of the HUBZone representation.

(11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) of this provision.)

[The offeror shall check the category in which its ownership falls]:

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

___ Individual/concern, other than one of the preceding.

(d) Representations required to implement provisions of Executive Order 11246 --

(1) Previous contracts and compliance. The offeror represents that --

(i) It [ ___ ] has, [ ___ ] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and

(ii) It [ ___ ] has, [ ___ ] has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that --

(i) It [ ___ ] has developed and has on file, [ ___ ] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or

(ii) It [ ___ ] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American – Supplies, is included in this solicitation.)

(1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Supplies.”

(2) Foreign End Products:

[List as necessary]

(3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(g)

(1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act.”

(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

(iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.”

Other Foreign End Products:

(iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.

(2) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Canadian End Products:

Line Item No.:

[List as necessary]

(3) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act'':

Canadian or Israeli End Products:

(4) Buy American—Free Trade Agreements—Israeli Trade Act Certificate, Alternate III. If Alternate III to the clause at 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision:

(g)(1)(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”:

Free Trade Agreement Country End Products (Other than Bahrainian, Korean, Moroccan, Omani, Panamanian, or Peruvian End Products) or Israeli End Products:

(5) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.)

(i) The offeror certifies that each end product, except those listed in paragraph (g)(5)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.”

(ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products.

Other End Products

(iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25.