Attachment 3 - Questions and Answers FA560624Q0073.docx

30 KB Posted

Attached to
Custom ISU - Amendment 1
Solicitation number
FA560624Q0073
Issued by

About this file

Written by GovTribe AI ·

This document contains Questions and Answers related to Solicitation FA560624Q0073 for a Custom ISU (Internal Slingable Unit). The key details are:

The solicitation is seeking a customized internal airlift/helicopter slingable container unit (ISU) capable of housing tools and equipment necessary to maintain and store explosives in any environment. This is a re-solicitation due to no technically acceptable quotes received previously under Solicitation FA560624Q0046.

The questions address details such as the base container part number, requirement for ATTLA certification for internal air transport, operating temperature requirements, and the responsibilities of the contractor versus the end user. Responses indicate that alternative ISUs will be considered, a certifiable container is acceptable if dimensions are met, the operating temperature range is -65F to 160F, and the contractor is responsible for the ISU and customization while the end user will provide and install other equipment.

View the file

Other files

File Type Posted
Solicitation Combo - FA560624Q0073.pdf PDF
Attachment 2 - ISU Construction Guide (Reference for Custom Build).pdf PDF
Attachment 1 - Custom ISU Minimum Requirements.pdf PDF
Solicitation Combo - FA560624Q0073.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Questions and Answers for Solicitation FA560624Q0073

1. Are you able to provide the base container part number?

The requirement is based off of the AAR 56TBD‐TBD, 56257996, but alternative ISUs will be considered for acceptance.

1. Does the base container need to be certified by ATTLA for internal air transport? Would it be acceptable to offer a certifiable container?

Yes & Yes, if dimensions are met

1. Can you provide additional details in regards to the following line listed in the minimum requirements document? “The unit must also be compliant with the 11P series T.O. for required operating temperatures”

-65°F Min thru 160°F Max degrees

1. Is the contractor installing required equipment or is the end user?

The contractor is responsible for the ISU and the customization of the ISU to accommodate the build in Attachment 2. The end user will provide and install the other equipment.

File details come from the government source that posted it. Updated .