Attachment 1 - Requirements Checklist with Salient Characteristics.pdf
PDF 213 KB Posted
- Solicitation number
- FA524025Q2005
About this file
This document is an Attachment 1 - Requirements Checklist with Salient Characteristics related to a federal contract opportunity.
The key details are:
The contract opportunity is for a Portable Hydraulic Fabrication Container for the 36th Logistics Readiness Squadron (36 LRS) in Guam. The container must be a commercial shipping container of at least 8'x20'x9' in size, lockable, weatherproof, insulated, and meet ISO shipping requirements. It must come pre-installed with storage bins, hose reel areas, a work bench with vise and cut-off saw, and a 50-liter air compressor and 230V hydraulic crimper.
The solicitation number is FA524025Q2005, issued by the Department of the Air Force Pacific Air Forces. Requests for Information are due by 21 Nov 2024, and Quotes are due by 27 Nov 2024, both at 11:00 AM ChST.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Requirement Description with Salient Characteristics for
FA524025Q2005 - 36 LRS Portable Hydraulic Fabrication Container
1. Container
Commercial Shipping container capable of fabricating and storing equipment and materials required for hydraulic hoses. The steel container needs to be at least 8'X20'X9'.
Container shall be lockable, weatherproof, insulated to prohibit moisture build up inside of the container and meet all ISO container shipping requirements. Container shall have maintenance free, rust proof coating that refracts heat, and weather seals, interior and exterior finishes must be durable and guaranteed for a minimum of 5 years. The container will be delivered to the designated location from the site survey and will be installed locally via mission partners.
The container needs to come with following equipment pre-installed and ready for use;
1.2. Small storage bins capable of holding at least 50 different hydraulic fittings.
1.3. At least 12 hose reels storage areas for hydraulic hoses, a work bench at least 14 feet long and 5 feet tall.
1.4. One Work Bench. The work bench will have a mounted 6-inch bench vise as well as a 230 volt 1-phase Cut off saw.
1.5. One Air Compressor. The container will also include an electric air compress that meets the following requirements 50-liter Air Compressor // 115psi Cast Iron // 120kg // 1080mm Length x 375mm Width x 760mm Height // Twin Cylinder Pump // Belt driven.
1.6. One Hydraulic Crimper. A 230 Volt Hydraulic crimper with foot pedal capable of the following requirements as well as the crimping dies required to meet the parameters;
Crimping diameter range: 10–87 mm Crimping force: 2000 kN/200 ton Crimping per hour 700/850 Size of hose 2 Opl. 2" (DN51) / 4 Opl. 2 (DN51) Set of crimpind dies P32 Maximum opening (mm) +33 Main crimping dies D/L (mm) 99/80 Control MS Drive (kW) 4 Tension (HP) 5.3
File details come from the government source that posted it. Updated .