STATEMENT_OF_WORK_6_Feb_2019.pdf

Page - 1 - of 4

STATEMENT OF WORK

FOR

Refurbishing of Aircraft Arresting Systems (AAS) and Mobile Aircraft Arresting Systems

(MAAS)

AT

JOINT BASE ELMENDORF-RICHARDSON, ALASKA

6 Feb 2019

Page - 2 - of 4

1.0 DESCRIPTION OF SERVICES

1.1 General. This is a non-personnel services contract to provide Deutz engine mount kits for Aircraft Arresting Systems (AAS) and Mobile Aircraft Arresting Systems (MAAS) equipment, in support of the 611th Civil Engineering Squadron, Barrier Depot.

1.1.1 Overview Description of Services/Introduction. Provide all management, personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items necessary to perform the services -in this Performance Work Statement.

1.2 Background. The purpose of this requirement is to support the mandatory ten year overhaul of the BAK-12 Aircraft Arresting System (AAS) and Mobile Aircraft Arresting System (MAAS). This requirement is to manufacture mounting kits to accommodate the Deutz Engine and be used in permanent installations or used on the MAAS for portable systems.

1.3 Objectives. Manufacture and supply the kits in accordance with the drawings provided.

1.4 Scope. This contract is to manufacture and supply the Deutz mounting kits. Each task is to be completed according to instructions under 1.6.2 Specific task.

2. Applicable Documents. The publications and forms have been coded as "M" (Mandatory) or "A" (Advisory). The Contractor is obligated to follow those publications and use those forms coded as mandatory to the extent specified in this PWS. Drawings are provided.

T.O. DATE TITLE CODE

Drawings attached M

3. Requirements.

3.1.1. Basic Services. The Contractor will provide Deutz engine mounting kits containing the following:

3.1.2. Specific Requirements.

3.1.2.1. Engine stand 2 each.

3.1.2.2. Control panel stand 1 each

Page - 3 - of 4

3.1.2.3. Gauge panel 1 each.

3.1.2.4. Flat plate 1 each.

3.1.2.5. Angle bracket 1 each.

3.1.2.6. All items need to be fabricated and returned within (6) weeks of delivery order to include transportation time to and from the vendor.

Page - 4 - of 4

4. Additional Information

4.1. The Contractor is required to follow the requirements in the attached drawings.

4.2. Minimum Qualifications. The Contractor shall retain maintenance personnel with the minimum qualification to perform all specific tasks in the PWS in accordance with industry standards.

4.3. The Contractor is responsible for and required to implement, and maintain management control systems necessary to plan, organize, direct, and control all activities under this contract.

4.4. The Contractor shall be responsible for maintaining communication with the Contracting Officer (CO) and the Quality Assurance Personnel (QAP), and to immediately notify both the CO and the QAP of any problems that would prevent timely performance.