PWS--Appendix D--GFP Mar 12 -Waste--12R0003.doc

FA5209-12-R-0003

Attachment 1

APPENDIX D

GOVERNMENT-FURNISHED PROPERTY

1. Government-Furnished FACILITY

1.1. The Government will furnish the segregation compound at Bldg 1530, 71,964 SF (6,685 SM)

1.1.1. The Government-furnished facilities have been inspected for compliance with the Occupational Safety and Health Act (OSHA). No hazards have been identified for which workarounds have been established. Should a hazard be subsequently identified, the Government corrects OSHA hazards according to the base-wide Government developed and approved plans of abatement taking into account safety and health priorities. A higher priority for correction will not be assigned to the facilities provided hereunder merely because of this contracting initiative. The fact that no such conditions have been identified does not warrant or guarantee that no possible hazard exists, or that workaround procedures will not be necessary or that the facilities as furnished will be adequate to meet the responsibilities of the Contractor. Compliance with OSHA and other applicable laws and regulations for the protection of employees is exclusively the obligation of the Contractor. The Government will assume no liability or responsibility for the Contractor's compliance or noncompliance with such requirements, with the exception of the aforementioned requirement to make corrections in accordance with approved plans of abatement subject to base-wide priorities. Before any modification of the facilities performed at the Contractor’s expense, the Contractor shall furnish the Contracting Officer (CO) documentation describing, in detail, the modification requested. No alterations to the facilities shall be made without specific written permission from the CO. In the case of alterations necessary for compliance with OSHA, such permission shall not be unreasonably withheld.

1.1.2. The Contractor shall return the facilities to the Government in the same condition as received, fair wear and tear and approved modifications excepted.

1.1.3. The Government-furnished facility shall be used only in the performance of this contract. The Contractor shall not use the Government-furnished facility to work on any project, proposal, or bid that does not relate to this contract.

2. Government-Furnished CONTAINERS

2.1. Yokota O&M Area at Yokota AB

Bldg 88: 1

Bldg 1214: 1

Bldg 4086: 1

CE Yard: 4

2.2. TAMA Area

* The Contractor shall provide label in accordance with para 1.1.8. of PWS.

2.3. Garden House in MFH Area at Yokota AB

2.4. TOKOROZAWA Area

2.5. OWADA Area

2.6. MOMOTE Area

3. GOVERNMENT-FURNISHED EQUIPMENT

3.1. Metal Presser (refer to para 1.4.1. of PWS)

Name: Alligator Metal Presser

Manufacturer: Kitamachi Kiki Co., Ltd.

Model No: AP124860-11

Year: 2003

Cost: ¥6,701,000

PAGE