ReplPage-PWS.pdf

Attachment 1 to Solicitation No. FA5209-11-T-0049

Amendment 0001 / Replacement Page

Contractor shall not be relieved from complying with said laws/ordinances and instruction/inspection related to hazardous freight. The hazardous freight that does not require the GOJ clearance (which is below the specified amount) shall be considered sensitive freight. For transportation services exceeding

200 km per one-way, the Government will require the Contractor to provide Dual Driver Protective

Service (DDP) as specified at para 1.2.5 (a) below. The Government requires the Contractor to provide

Signature Security Service (SSS) regardless of distance as specified at para 1.2.5 (b) below. These items may be commingled with general freight for shipment purposes as applicable.

(a) Low explosives: NEW of 200 kgs or less.

(b) High explosives: NEW of 100 kgs or less.

(c) Blasting caps, electric and non-electric: 40,000 each or less.

(d) Small arms primer: 400,000 each or less.

(e) Detonating cord: 6 kilometers or less.

(f) Live or blank small arms ammunition (SAA) NEW of 0.5g or less per round:

400,000 each or less.

(g) Live or blank SAA NEW of over 0.5g per round:

200,000 each or less.

(h) Other explosive materials not listed above: NEW of 100 kgs or less.

Remarks: When transporting a truck loaded with two or more items mentioned above, net explosive weight or quantity of the items shall be divided by the applicable weight or quantity specified above for the item to obtain percentages. And the sum of the percentages shall not exceed 100%. Example:

Loading with low explosives 100 kgs and high explosives 50kg; 100kgs/200kgs + 50kgs/100kgs = 50% +

50% = 100%.

1.2.4 Sensitive freight – shall consist of any freight which requires a high degree of protection while in transit as designated by the OO.

1.2.5 Dual Driver Protective Service (DDP) and Signature Security Service (SSS): The Contractor shall comply with the following service requirements when transporting freight designated as sensitive or hazardous freight by the OO.

(a) DDP. Any truck transporting sensitive or hazardous freight shall be manned by an operator possessing an applicable driver’s license and one other accompanying Contractor personnel. The truck loaded with said freight shall be attended by at least one of them in the cab of the truck and not in a sleeper berth or within 25 feet of truck at all times during brief stops when required.

(b) SSS. Whenever the Contractor in transporting sensitive or hazardous freight utilizes more than one pair of dual vehicle crew members for a particular movement, SSS requirement described must be complied with as follows. In providing SSS, the contractor will fill in Blocks 25, 26 and 27 of DD Form

1384 (Transportation Control and Movement Document, TCMD) accompanying each shipment. This provide continuous responsibility for the custody of shipments in transit by requiring signature and tally record from each person responsible for the proper handling of the shipment from origin to destination.