Wheel Washer Specs.pdf
PDF 80 KB Posted
- Attached to
- Wheel Washer
- Solicitation number
- FA520520QB099
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MXMT Wheel Washer Specs UPDATED.docx | DOCX document | |
| RFQ - FA520520QB099.pdf | ||
| FA520520QB099 attachment 1.pdf | ||
| ATTACHMENT 2 to Implementation of Section 889.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications Requirements for Wheel Washer
- Aqueous parts washer, stainless steel construction with the ability to remove surface deposits of foreign materials by means of a forced stream of steam or water with or without detergent.
- 140 Gal minimum capacity.
- 5HP minimum pump motor.
- Heat element 18KW minimum capable of at least 160 Deg F.
- 38" minimum turntable size with 1500lb capacity.
- Preferred capacity is minimum 2 entire main wheels loaded for cleaning at once o Main Wheels are split rim, snap ring designs with main inner hub and outer bead lock plate o Main wheel diameter is 15” x 8” wide o Nose wheels are split rim with roughly equal width wheel halves o Nose wheel diameter is 8” x 6” wide
- Automatic oil skimmer, CHIP and/or sludge separator.
- Automatic steam exhaust
- 7-day/24 hour timer.
- Closed loop system to reduce/eliminate waste water discharge
- Re-circulated rinse system.
- Low water level shut-off for safety and automatic water fill.
- In-line strainer rated for GPM produced by pump(s).
- Hi-temp plastic strips on the turntable (or other means of protecting against metal on metal) OR stainless steel fixture for holding and locating wheels in vertical orientation during cleaning cycle.
- Current max facility power is rated at 200v, 30 amp o Other power ratings available are 120v, 20 amp & 200v, 20 amp.
File details come from the government source that posted it. Updated .