MXMT Wheel Washer Specs UPDATED.docx

Specifications Requirements for Wheel Washer

· Aqueous parts washer, stainless steel construction with the ability to remove surface deposits of foreign materials by means of a forced stream of steam or water with or without detergent.

· 140 Gal minimum capacity.

· 5HP minimum pump motor.

· Heat element 18KW minimum capable of at least 160 Deg F.

· 38" minimum turntable size with 1500lb capacity.

· Preferred capacity is minimum 2 entire main wheels loaded for cleaning at once

· Main Wheels are split rim, snap ring designs with main inner hub and outer bead lock plate

· Main wheel diameter is 15” x 8” wide

· Nose wheels are split rim with roughly equal width wheel halves

· Nose wheel diameter is 8” x 6” wide

· Automatic oil skimmer, CHIP and/or sludge separator.

· Automatic steam exhaust

· 7-day/24 hour timer.

· Closed loop system to reduce/eliminate waste water discharge

· Re-circulated rinse system.

· Low water level shut-off for safety and automatic water fill.

· In-line strainer rated for GPM produced by pump(s).

· Hi-temp plastic strips on the turntable (or other means of protecting against metal on metal) OR stainless steel fixture for holding and locating wheels in vertical orientation during cleaning cycle.

· available power in facility is 120v/208v, 50Hz, and 50 amps