Combo_-_Corrision_Control_Painting_NMUSAF_Static_Displays.doc

35th Contracting Squadron

USAF Misawa Air Base, Japan

FA520518QB068, Corrosion Control/Painting of NMUSAF Static Displays

REQUEST FOR QUOTATION:

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation number is FA520518QB068; this solicitation is a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through FAC 2005-99, DPN 20171228, and AFAC 2018-0525. This acquisition will be full and open competition.

Offerors may use another format for submission of a response to this RFQ. All responses must contain the minimum information required as listed below.

Please provide the following information:

Company Name:

CAGE Code:

DUNS No.:

Quote Expiration:

Prompt payment discount terms:

Delivery Time:

Name of Offeror:

Offeror Email:

Offeror Phone:

Signature:

Date:

Requested Supplies and Services List

Total Amount:

*Award shall be made in the aggregate, all or none.

Work Location:

All work locations will be located on Misawa Air Base, Japan. Exact work locations are located in the PWS.

Site Visit:

A site visit will be conducted on 28 August 2018 at 1000 on Misawa Air Base. Any interested vendors must confirm attendance with one of the POCs listed below by 1600(JST) on 24 August 2018. To gain access to the installation each vendor and guest must possess a valid identification (if not a Japanese National must possess passport with ID) and vehicle insurance.

INSTRUCTIONS TO OFFERORS:

To assure timely and equitable evaluation of quotes, offerors must follow the instructions contained

Herein:

(a) Submit offeror information and the price as specified on page one of this RFQ.

EVALUATION CRITERIA:

Evaluation of quotations will be completed in accordance with FAR 13.106-2. The Government will award the contract resulting from this solicitation to the responsible offeror whose offer conforms to the solicitation and represents the best value to the Government.

Evaluation Factors: (1) Technical and (2) Price.

Technical Acceptable/Unacceptable Rating Method

Contractors must be actively registered with the System Award Management (SAM). Lack of registration in the SAM database will make an offeror ineligible for award. The Contractor is required to confirm on an annual basis that its information in the SAM database is accurate and complete at https://www.sam.gov/. (IAW FAR 52.232-33 Payment by Electronic Funds Transfer- System Award Management, Jul 13)

Contractors must be registered in Wide Area Work Flow (WAWF). The WAWF system is the method to electronically process vendor payment requests and receiving reports, at http://wawf.eb.mil/. (Authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports) **Note – Upon receipt of quotes the government will evaluate starting with the lowest priced quote. If lowest priced is deemed technically acceptable no other quotes will be evaluated to determine technical acceptability.**

RESPONSE TIME:

Please send any response NO LATER THAN 1000 on 7 Sep 18 (JST) or 2100 on 6 Sep 18 (EST).

Primary point of contact is Christopher Davalos, TSgt, Contracting Specialist, Telephone 011-81-176-77-8074, Email christopher.davalos@us.af.mil Alternate POC is Benjamin Albers, SrA, Contract Officer, Telephone 011-81-176-77-4895, Email benjamin.albers@us.af.mil.

PROVISIONS/CLAUSES:

The following provisions and/or clauses apply to this acquisition. Offerors must comply with all instructions contained in. Clauses may be accessed electronically in full text through http://farsite.hill.af.mil.

CLAUSES INCORPORATED BY REFERENCE

Conviction under any Federal Law

FEB 2016

CLAUSES INCORPORATED BY FULL TEXT

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through

WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

Combo (Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and

“Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

Destination (Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF

Data to be entered in WAWF

Pay Official DoDAAC

F87700 Issue By DoDAAC

FA5205

Admin DoDAAC

FA5205

Inspect By DoDAAC

Ship To Code

FA5205 Extension F3D0A0 Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

James.burrett@us.af.mil benjamin.albers@us.af.mil

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Benjamin.albers@us.af.mil

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

5352.201-9101

OMBUDSMAN (JUN 2016)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, Air Force Installation Contracting Agency (AFICA)/KP Director, 1940 Allbrook Drive, Building 1, Wright-Patterson AFB OH 45433, Phone: (937) 257-5529, Fax: (937) 656-0919. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/DRU/SMC ombudsman level, may be brought by the interested party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

(End of clause)

5352.242-9000

CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (NOV 2012)

(a) The contractor shall obtain base identification and vehicle passes, if required, for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or Security Forces for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, valid vehicle insurance certificate, and 35FW Form 54, Application for Vehicle Registration to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Integrated Defense, and AFI 31-501, Personnel Security Program Management.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

(End of clause) Attachment:

1. Performance Work Statement (PWS)