JA-3_Summary_of_Work_07042014.pdf

1.6 1.6.1 1.7

SECTION 01 11 00

SUMMARY OF WORK

08/11

PART 1 GENERAL

1.1 WORK COVERED BY CONTRACT DOCUMENTS

1.1.1 Project Description

The work includes maintenance of airfield pavement and surfaces and incidental related work.

1.1.2 Location

The work shall be located at Eielson AFB, AK, approximately as indicated.

The exact location will be shown by the Contracting Officer.

1.2 OCCUPANCY OF PREMISES

Building(s) will be occupied during performance of work under this Contract.

Before work is started, the Contractor shall arrange with the Contracting Officer a sequence of procedure, means of access, space for storage of materials and equipment, and use of approaches, corridors, and stairways.

1.3 EXISTING WORK

In addition to "FAR 52.236-9, Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements":

a. Remove or alter existing work in such a manner as to prevent injury or damage to any portions of the existing work which remain.

b. Repair or replace portions of existing work which have been altered during construction operations to match existing or adjoining work, as approved by the Contracting Officer. At the completion of operations, existing work shall be in a condition equal to or better than that which existed before new work started.

1.5

Obtain digging permits prior to start of excavation.

1.5.1

Notify the Contracting Officer at least 15 days prior to starting excavation work.

PART 2 PRODUCTS

Not used.

PART 3 EXECUTION

Not used.

-- End of Section --

SECTION 01 33 00

SUBMITTAL PROCEDURES

05/11

1.1 DEFINITIONS

1.1.1 Submittal Descriptions (SD)

Submittals requirements are specified in the technical sections.

Submittals are identified by Submittal Description (SD) numbers and titles as follows:

SD-01 Preconstruction Submittals

Submittals which are required prior to start of construction (work)

Certificates of insurance

Surety bonds

List of proposed Subcontractors

List of proposed products

Construction progress schedule

Network Analysis Schedule (NAS)

Submittal register

Schedule of prices

Health and safety plan

Work plan

Quality Control(QC) plan

Environmental protection plan

SD-02 Shop Drawings

Drawings, diagrams and schedules specifically prepared to illustrate some portion of the work.

Diagrams and instructions from a manufacturer or fabricator for use in producing the product and as aids to the Contractor for integrating the product or system into the project.

Drawings prepared by or for the Contractor to show how multiple systems and interdisciplinary work will be coordinated.

SD-03 Product Data

Catalog cuts, illustrations, schedules, diagrams, performance charts, instructions and brochures illustrating size, physical appearance and other characteristics of materials, systems or equipment for some portion of the work.

Samples of warranty language when the contract requires extended product warranties.

SD-04 Samples

Fabricated or unfabricated physical examples of materials, equipment or workmanship that illustrate functional and aesthetic characteristics of a material or product and establish standards by which the work can be judged.

Color samples from the manufacturer's standard line (or custom color samples if specified) to be used in selecting or approving colors for the project.

Field samples and mock-ups constructed on the project site establish standards by which the ensuring work can be judged. Includes assemblies or portions of assemblies which are to be incorporated into the project and those which will be removed at conclusion of the work.

SD-06 Test Reports

Report signed by authorized official of testing laboratory that a material, product or system identical to the material, product or system to be provided has been tested in accord with specified requirements. (Testing must have been within three years of date of contract award for the project.)

Report which includes findings of a test required to be performed by the Contractor on an actual portion of the work or prototype prepared for the project before shipment to job site.

Report which includes finding of a test made at the job site or on sample taken from the job site, on portion of work during or after installation.

Investigation reports.

Daily logs and checklists.

Final acceptance test and operational test procedure.

SD-07 Certificates

Statements printed on the manufacturer's letterhead and signed by responsible officials of manufacturer of product, system or material attesting that product, system or material meets specification requirements. Must be dated after award of project contract and clearly name the project.

Document required of Contractor, or of a manufacturer, supplier, installer or Subcontractor through Contractor, the purpose of which is to further quality of orderly progression of a portion of the work by documenting procedures, acceptability of methods or personnel qualifications.

Confined space entry permits.

Text of posted operating instructions.

SD-08 Manufacturer's Instructions

Preprinted material describing installation of a product, system or material, including special notices and (MSDS)concerning impedances, hazards and safety precautions.

SD-09 Manufacturer's Field Reports

Documentation of the testing and verification actions taken by manufacturer's representative at the job site, in the vicinity of the job site, or on a sample taken from the job site, on a portion of the work, during or after installation, to confirm compliance with manufacturer's standards or instructions. The documentation must be signed by an authorized official of a testing laboratory or agency and must state the test results; and indicate whether the material, product, or system has passed or failed the test.

Factory test reports.

SD-10 Operation and Maintenance Data

Data that is furnished by the manufacturer, or the system provider, to the equipment operating and maintenance personnel, including manufacturer's help and product line documentation necessary to maintain and install equipment. This data is needed by operating and maintenance personnel for the safe and efficient operation, maintenance and repair of the item.

This data is intended to be incorporated in an operations and maintenance manual or control system.

SD-11 Closeout Submittals

Documentation to record compliance with technical or administrative requirements or to establish an administrative mechanism.

Special requirements necessary to properly close out a construction contract. For example, Record Drawings and as-built drawings. Also, submittal requirements necessary to properly close out a major phase of construction on a multi-phase contract.

Interim "DD Form 1354" with cost breakout for all assets 30 days prior to facility turnover.

1.1.2 Approving Authority

Office or designated person authorized to approve submittal.

1.1.3 Work

As used in this section, on- and off-site construction required by contract documents, including labor necessary to produce submittals, construction, materials, products, equipment, and systems incorporated or to be incorporated in such construction.

1.2 SUBMITTALS

Government approval is required for submittals with a "G" designation;

submittals not having a "G" designation are for information only. When used, a designation following the "G" designation identifies the office that will review the submittal for the Government. Submit the following in accordance with this section.

SD-01 Preconstruction

Submittals Submittal

Register; G

1.3 PREPARATION

1.3.1 Transmittal Form

1.4 VARIATIONS

Variations from contract requirements require both Designer of Record (DOR) and Government approval pursuant to contract Clause FAR 52.236-21 and will be considered where advantageous to Government.

1.4.1 Considering Variations

Discussion with Contracting Officer prior to submission, after consulting with the DOR, will help ensure functional and quality requirements are met and minimize rejections and re-submittals. When contemplating a variation which results in lower cost, consider submission of the variation as a Value Engineering Change Proposal (VECP).

Specifically point out variations from contract requirements in transmittal letters. Failure to point out deviations may result in the Government requiring rejection and removal of such work at no additional cost to the Government.

1.4.2 Proposing Variations

When proposing variation, deliver written request to the Contracting Officer, with documentation of the nature and features of the variation and why the variation is desirable and beneficial to Government, including the DOR's written analysis and approval. If lower cost is a benefit, also include an estimate of the cost savings. In addition to documentation required for variation, include the submittals required for the item.

Clearly mark the proposed variation in all documentation.

1.4.3 Warranting That Variations Are Compatible

When delivering a variation for approval, Contractor, including its Designer(s) of Record, warrants that this contract has been reviewed to establish that the variation, if incorporated, will be compatible with other elements of work.

1.4.4 Review Schedule Is Modified

In addition to normal submittal review period, a period of 10working days will be allowed for consideration by the Government of submittals with variations.

1.5 SUBMITTAL REGISTER

Prepare and maintain submittal register, as the work progresses. Do not change data which is output in columns (c), (d), (e), and (f) as delivered by Government; retain data which is output in columns (a), (g), (h), and as approved. A submittal register showing items of equipment and materials for which submittals are required by the specifications is provided as an attachment. This list may not be all inclusive and additional submittals may be required. The Government will provide the initial submittal register in electronic format.

Column (c): Lists specification section in which submittal is required.

Column (d): Lists each submittal description (SD No. and type, e.g. SD-02 Shop Drawings) required in each specification section.

Column (e): Lists one principal paragraph in specification section where a material or product is specified. This listing is only to facilitate locating submitted requirements. Do not consider entries in column (e) as limiting project requirements.

1.5.1 Use of Submittal Register

Submit submittal register. Submit with QC plan and project schedule.

Verify that all submittals required for project are listed and add missing submittals. Coordinate and complete the following fields on the register submitted with the QC plan and the project schedule:

Column (a) Activity Number: Activity number from the project schedule.

Column (g) Contractor Submit Date: Scheduled date for approving authority to receive submittals.

Column (h) Contractor Approval Date: Date Contractor needs approval of submittal.

Column (i) Contractor Material: Date that Contractor needs material delivered to Contractor control.

1.5.2 Contractor Use of Submittal Register

Update the following fields in the Government-furnished submittal register program or equivalent fields in program utilized by Contractor with each submittal throughout contract.

Column (b) Transmittal Number: Contractor assigned list of consecutive numbers.

Column (j) Action Code (k): Date of action used to record Contractor's review when forwarding submittals to QC.

Column (l) List date of submittal transmission.

Column (q) List date approval received.

1.5.3 Approving Authority Use of Submittal Register

Update the following fields in the Government-furnished submittal register program or equivalent fields in program utilized by Contractor.

Column (b) Transmittal Number: Contractor assigned list of consecutive numbers.

Column (l) List date of submittal receipt.

Column (m) through (p) List Date related to review actions. Column (q) List date returned to Contractor.

1.5.4 Copies Delivered to the Government

Deliver one copy of submittal register updated by Contractor to Government with each invoice request.

1.6 SCHEDULING

Schedule and submit concurrently submittals covering component items forming a system or items that are interrelated. Include certifications to be submitted with the pertinent drawings at the same time. No delay damages or time extensions will be allowed for time lost in late submittals.

a. Coordinate scheduling, sequencing, preparing and processing of submittals with performance of work so that work will not be delayed by submittal processing. Allow for potential resubmittal of requirements.

b. Submittals called for by the contract documents will be listed on the register. If a submittal is called for but does not pertain to the contract work, the Contractor is to include the submittal in the register and annotate it "N/A" with a brief explanation. Approval by the Contracting Officer does not relieve the Contractor of supplying submittals required by the contract documents but which have been omitted from the register or marked "N/A."

c. Re-submit register and annotate monthly by the Contractor with actual submission and approval dates. When all items on the register have been fully approved, no further re-submittal is required.

d. Carefully control procurement operations to ensure that each individual submittal is made on or before the Contractor scheduled submittal date shown on the approved "Submittal Register."

1.7 GOVERNMENT APPROVING AUTHORITY

When approving authority is Contracting Officer, the Government will:

e. Note date on which submittal was received.

f. Review submittals for approval within scheduling period specified and only for conformance with project design concepts and compliance with contract documents.

g. Identify returned submittals with one of the actions defined in paragraph entitled, "Review Notations," of this section and with markings appropriate for action indicated.

Upon completion of review of submittals requiring Government approval, stamp and date approved submittals. One copy of the approved submittal will be retained by the Contracting Officer and one copy of the submittal will be returned to the Contractor.

1.8 DISAPPROVED SUBMITTALS

Contractor shall make corrections required by the Contracting Officer.

If the Contractor considers any correction or notation on the returned submittals to constitute a change to the contract drawings or specifications; notice as required under the clause entitled, "Changes," is to be given to the Contracting Officer. Contractor is responsible for the dimensions and design of connection details and construction of work. Failure to point out deviations may result in the Government requiring rejection and removal of such work at the Contractor's expense.

If changes are necessary to submittals, the Contractor shall make such revisions and submission of the submittals in accordance with the procedures above. No item of work requiring a submittal change is to be accomplished until the changed submittals are approved.

1.9 APPROVED SUBMITTALS

The Contracting Officer's approval or acceptance of submittals is not to be construed as a complete check, and indicates only that

Approval or acceptance will not relieve the Contractor of the responsibility for any error which may exist, as the Contractor under the Contractor Quality Control (CQC) requirements of this contract is responsible for the satisfactory construction of all work. After submittals have been approved or accepted by the Contracting Officer, no resubmittal for the purpose of substituting materials or equipment will be considered unless accompanied by an explanation of why a substitution is necessary.

1.10 APPROVED SAMPLES

Approval of a sample is only for the characteristics or use named in such approval and is not be construed to change or modify any contract requirements. Before submitting samples, the Contractor to assure that the materials or equipment will be available in quantities required in the project. No change or substitution will be permitted after a sample has been approved.

Match the approved samples for materials and equipment incorporated in the work. If requested, approved samples, including those which may be damaged in testing, will be returned to the Contractor, at his expense, upon completion of the contract. Samples not approved will also be returned to the Contractor at its expense, if so requested.

Failure of any materials to pass the specified tests will be sufficient cause for refusal to consider, under this contract, any further samples of the same brand or make of that material. Government reserves the right to disapprove any material or equipment which previously has proved unsatisfactory in service.

Samples of various materials or equipment delivered on the site or in place may be taken by the Contracting Officer for testing. Samples failing to meet contract requirements will automatically void previous approvals. Contractor to replace such materials or equipment to meet contract requirements.

Approval of the Contractor's samples by the Contracting Officer does not relieve the Contractor of his responsibilities under the contract.

Not Used

Not Used

SECTION 01 42 00

SOURCES FOR REFERENCE PUBLICATIONS

08/10

PART 1 GENERAL

1.1 REFERENCES

Various publications are referenced in other sections of the specifications to establish requirements for the work. These references are identified in each section by document number, date and title. The document number used in the citation is the number assigned by the standards producing organization (e.g. ASTM B564 Standard Specification for Nickel Alloy Forgings). However, when the standards producing organization has not assigned a number to a document, an identifying number has been assigned for reference purposes.

1.2 ORDERING INFORMATION

The addresses of the standards publishing organizations whose documents are referenced in other sections of these specifications are listed below, and if the source of the publications is different from the address of the sponsoring organization, that information is also provided. Documents listed in the specifications with numbers which were not assigned by the standards producing organization should be ordered from the source by title rather than by number.

AMERICAN CONCRETE INSTITUTE INTERNATIONAL (ACI)

38800 Country Club Drive Farmington Hills, MI 48331 Ph: 248-848-3700 Fax: 248-848-3701 E-mail: bkstore@concrete.org Internet: http://www.concrete.org

ACOUSTICAL SOCIETY OF AMERICA (ASA)

2 Huntington Quadrangle, Suite 1NO1 Melville, NY 11747-4502 Ph: 516-576-2360 Fax: 516-576-2377 E-mail: asa@aip.org Internet: http://asa.aip.org

AIR CONDITIONING CONTRACTORS OF AMERICA (ACCA)

2800 Shirlington Road, Suite 300 Arlington, VA 22206 Ph: 703-575-4477 Fax: 703-575-4449 E-mail: info@acca.org Internet: http://www.acca.org

AIR DIFFUSION COUNCIL (ADC)

1901 N. Roselle Road, suite 800 Schaumburg, IL 60195 Ph: 847-706-6750

Fax: 847-706-6751 E-mail: info@flexibleduct.org Internet: http://www.flexibleduct.org

AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)

30 West University Drive Arlington Heights, IL 60004-1893 Ph: 847-394-0150 Fax: 847-253-0088 E-mail: amca@amca.org Internet: http://www.amca.org

AIR-CONDITIONING, HEATING AND REFRIGERATION INSTITUTE (AHRI)

2111 Wilson Blvd, Suite 500 Arlington, VA 22201 Ph: 703-524-8800 Fax: 703-528-3816 E-mail: fdietz@ahrinet.org Internet: http://www.ahrinet.org

ALLIANCE FOR TELECOMMUNICATIONS INDUSTRY SOLUTIONS (ATIS)

1200 G Street, NW, Suite 500 Washington, D.C. 20005 Ph: 202-628-6380 Fax: 202-393-5453 E-mail: doccenter@atis.org Internet: http://www.atis.org

ALUMINUM ASSOCIATION (AA)

National Headquarters 1525 Wilson Boulevard, Suite 600 Arlington, VA 22209 Ph: 703-358-2960 Fax: 703-358-2961 Internet: http://www.aluminum.org

AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)

1827 Walden Office Square Suite 550 Schaumburg, IL 60173-5774 Ph: 847-303-5664 Fax: 847-303-5774 E-mail: webmaster@aamanet.org Internet: http://www.aamanet.org

AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS

(AASHTO)

444 North Capital Street, NW, Suite 249 Washington, DC 20001 Ph: 202-624-5800 Fax: 202-624-5806 E-Mail: info@aashto.org Internet: http://www.aashto.org

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

1 Davis Drive P.O. Box 12215 Research Triangle Park, NC 27709

Ph: 919-549-8141 Fax: 919-549-8933 E-mail: leonardc@aatcc.org Internet: http://www.aatcc.org

AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)

2025 M Street, NW, Suite 800 Washington, DC 20036 Ph: 202-367-1155 Fax: 202-367-2155 E-mail: info@americanbearings.org Internet: http://www.abma-dc.org

AMERICAN BOILER MANUFACTURERS ASSOCIATION (ABMA/BOIL)

221 Old Courthouse Road Suite 202 Vienna, VA 22182 Ph: 703-356-7171 Fax: 703-356-4543 Internet: http://www.abma.com

AMERICAN BUREAU OF SHIPPING (ABS)

16855 Northcase Drive Houston, TX 77060 USA Ph: 1-282-877-5800 Internet: http://www.eagle.org

AMERICAN CONCRETE PIPE ASSOCIATION (ACPA)

1303 W. Walnut Hill Lane, Suite 305 Irving, TX 75038-3008 Ph: 972-506-7216 Fax: 972-506-7682 E-mail: info@concrete-pipe.org Internet: http://www.concrete-pipe.org

AMERICAN CONFERENCE OF GOVERNMENTAL INDUSTRIAL HYGIENISTS (ACGIH)

1330 Kemper Meadow Drive Cincinnati, OH 45240 Ph: 513-742-2020 or 513-742-6163 Fax: 513-742-3355 E-mail: mail@acgih.org Internet: http://www.acgih.org

AMERICAN FOREST & PAPER ASSOCIATION (AF&PA)

American Wood Council ATTN: Publications Department 1111 Nineteenth Street NW, Suite 800 Washington, DC 20036 Ph: 800-890-7732 or 202-463-2766 Fax: 202-463-2791 E-mail: awcpubs@afandpa.org Internet: http://www.awc.org/

AMERICAN GAS ASSOCIATION (AGA)

400 North Capitol Street N.W.

Suite 450 Washington, D.C. 20001 Ph: 202-824-7000 Fax: 202-824-7115

E-mail: website@aga.org Internet: http://www.aga.org

AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)

1001 N. Fairfax Street, Suite 500 Alexandria, VA 22314-1581 Ph: 703-684-0211 Fax: 703-684-0242 E-mail: websiter@agma.org Internet: http://www.agma.org

AMERICAN HARDBOARD ASSOCIATION (AHA)

1210 West Northwest Highway Palatine, IL 60067 Ph: 847-934-8800 Fax: 847-934-8803 E-mail: aha@hardboard.org Internet: http://domensino/AHA/

AMERICAN INDUSTRIAL HYGIENE ASSOCIATION (AIHA)

3141 Fairview Park Dr, Suite 777 Falls Church, VA 22042 Tel: 703-849-8888 Fax: 703-207-3561 E-mail: infonet@aiha.org Internet http://www.aiha.org

AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)

One East Wacker Drive, Suite 700 Chicago, IL 60601-1802 Ph: 312-670-2400 Fax: 312-670-5403 Publications: 800-644-2400 E-mail: pubs@aisc.org Internet: http://www.aisc.org

AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)

7012 South Revere Parkway, Suite 140 Centennial, CO 80112 Ph: 303-792-9559 Fax: 303-792-0669 E-mail: info@aitc-glulam.org Internet: http://www.aitc-glulam.org

AMERICAN IRON AND STEEL INSTITUTE (AISI)

1140 Connecticut Avenue, NW, Suite 705 Washington, DC 20036 Ph: 202-452-7100 Fax: 202-463-6577 E-mail: webmaster@steel.org Internet: http://www.steel.org

AMERICAN LADDER INSTITUTE (ALI/LADDER)

330 North Wabash Avenue, Suite 2000 Chicago, IL 60611 Tel: 202-367-1217 E-mail: info@americanladderinstitute.org Internet: http://www.americanladderinstitute.org

AMERICAN LUMBER STANDARDS COMMITTEE (ALSC)

P.O. Box 210 Germantown, MD 20875-0210 Ph: 301-972-1700 Fax: 301-540-8004 E-mail: alsc@alsc.org Internet: http://www.alsc.org

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

1819 L Street, NW,11th Floor Washington, DC 20036 Ph: 202-293-8020 Fax: 202-293-9287 E-mail: info@ansi.org Internet: http://www.ansi.org/

AMERICAN NURSERY & LANDSCAPE ASSOCIATION (ANLA)

1200 G Street NW, Suite 800 Washington, DC 20005 Ph: 202-789-2900 Fax: 202-789-1893 E-mail: aflynn@anla.org Internet: http://www.anla.org

AMERICAN PETROLEUM INSTITUTE (API)

1220 L Street, NW Washington, DC 20005-4070 Ph: 202-682-8000 E-mail: greg.kallio@ihs.com Internet: http://www.api.org

AMERICAN RAILWAY ENGINEERING AND MAINTENANCE-OF-WAY ASSOCIATION

(AREMA)

4501 Forbes Blvd., Suite 130 Lanham, MD 20706 Ph: 301-459-3200 Fax: 301-459-8077 Internet: http://www.arema.org

AMERICAN SOCIETY FOR NONDESTRUCTIVE TESTING (ASNT)

1711 Arlingate Lane P.O. Box 28518 Columbus, OH 43228-0518 Ph: 800-222-2768; 614-274-6003 Fax: 614-274-6899 E-mail: webmaster@asnt.org Internet: http://www.asnt.org

AMERICAN SOCIETY FOR QUALITY (ASQ)

600 North Plankinton Avenue Milwaukee, WI 53203 -or- P.O. Box 3005 Milwaukee, WI 53201-3005 Ph: 800-935-2231; 414-272-8575 Fax: 414-272-1734 E-mail: help@asq.org Internet: http://www.asq.org

AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)

1801 Alexander Bell Drive Reston, VA 20191-4400 Ph: 703-295-6300 - 800-548-2723 Fax: 703-295-6333 E-mail: member@asce.org Internet: http://www.asce.org

AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING

ENGINEERS (ASHRAE)

1791 Tullie Circle, NE Atlanta, GA 30329 Ph: 800-527-4723 or 404-636-8400 Fax: 404-321-5478 E-mail: ashrae@ashrae.org Internet: http://www.ashrae.org

AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE/SAFE)

1800 East Oakton Street Des Plaines, IL 60018-2187 Ph: 847-699-2929 Fax: 847-768-3434 E-mail: customerservice@asse.org Internet: http://www.asse.org

AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)

18927 Hickory Creek Drive, Suite 220 Mokena, IL 60448 Ph: 708-995-3019 Fax: 708-479-6139 E-mail: info@asse-plumbing.org Internet: http://www.asse-plumbing.org

AMERICAN WATER WORKS ASSOCIATION (AWWA)

6666 West Quincy Avenue Denver, CO 80235 Ph: 800-926-7337 Fax: 303-347-0804 E-mail: smorrison@awwa.org Internet: http://www.awwa.org

AMERICAN WELDING SOCIETY (AWS)

8669 NW 36 Street, #130550 N.W. LeJeune Road Miami, FL 33166-6672 Ph: 800-443-9353 - 305-443-9353 Fax: 305-443-7559 E-mail: info@aws.org or customerservice@awspubs.com Internet: http://www.aws.org

AMERICAN WOOD COUNCIL (AWC)

222 Catoctin Circle SE Suite 201 Leesburg, VA 20175 Ph: 800-890-7732 Fax: 608-232-9354 E-mail: publications@awc.org Internet: http://www.awc.org

AMERICAN WOOD PROTECTION ASSOCIATION (AWPA)

P.O. Box 361784 Birmingham, AL 35236-1784 Ph: 205-733-4077 Fax: 205-733-4075 E-mail: email@awpa.com Internet: http://www.awpa.com

APA - THE ENGINEERED WOOD ASSOCIATION (APA)

7011 South 19th St.

Tacoma, WA 98466-5333 Ph: 253-565-6600 Fax: 253-565-7265 E-mail: help@apawood.org Internet: http://www.apawood.org

ARCHITECTURAL WOODWORK INSTITUTE (AWI)

46179 Westlake Drive, Suite 120 Potomac Falls, VA 20165 Ph: 571-323-3636 Fax: 571-323-3630 E-mail: info@awinet.org Internet: http://www.awinet.org

ARCNET TRADE ASSOCIATION (ATA)

E-M-mail: info@arcnet.com Internet: http://www.arcnet.com/index.htm</URL

ASM INTERNATIONAL (ASM)

9639 Kinsman Road Materials Park, OH 44073-0002 Ph: 440-338-5151 Fax: 440-338-4634 E-mail: memberservicecenter@asminternational.org Internet:

http://asmcommunity.asminternational.org/portal/site/www/Home/

ASME INTERNATIONAL (ASME)

Three Park Avenue, M/S 10E New York, NY 10016-5990 Ph: 800-854-7179 or 800-843-2763 Fax: 212-591-7674 E-mail: infocentral@asme.org Internet: http://www.asme.org

ASPHALT INSTITUTE (AI)

2696 Research Park Drive Lexington, KY 40511-8480 Ph: 859-288-4960 Fax: 859-288-4999 E-mail: info@asphaltinstitute.org Internet: http://www.asphaltinstitute.org

ASPHALT ROOFING MANUFACTURER'S ASSOCIATION (ARMA)

529 14th Street, NW Washington D.C. 20045 Ph: 202-591-2450 Fax: 202-591-2445 Internet: http://www.asphaltroofing.org

ASSOCIATED AIR BALANCE COUNCIL (AABC)

1518 K Street, NW Washington, DC 20005 Ph: 202-737-0202 Fax: 202-638-4833 E-mail: info@aabc.com Internet: http://www.aabchq.com

ASSOCIATION FOR THE ADVANCEMENT OF MEDICAL INSTRUMENTATION (AAMI)

4301 N. Fairfax Drive, Suite 301 Arlington, VA 22203-1633 Ph: 800-332-2264 or 703-525-4890 Fax: 703-276-0793 E-mail: customerservice@aami.org Internet: http://www.aami.org

ASSOCIATION FOR IRON AND STEEL TECHNOLOGY (AIST)

186 Thorn Hill Road Warrendale, PA 15086-7528 Ph: 724-814-3000 Fax: 724-814-3001 E-Mail: info@aist.org Internet: http://www.aistech.org

ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)

600 North 18th Street P.O. Box 2641 Birmingham, AL 35291 Ph: 205-257-2530 Fax: 205-257-2540 E-Mail: aeicdir@bellsouth.net Internet: http://www.aeic.org

ASSOCIATION OF HOME APPLIANCE MANUFACTURERS (AHAM)

1111 19th Street NW, Suite 402 Washington, DC 20036 Ph: 202-872-5955 Fax: 202-872-9354 E-mail: info@aham.org Internet: http://www.aham.org

ASSOCIATION OF THE WALL AND CEILING INDUSTRIES - INTERNATIONAL

(AWCI)

513 West Broad Street, Suite 210 Falls Church, VA 22046 Ph: 703-538-1600 Fax: 703-534-8307 E-mail: info@awci.org Internet: http://www.awci.org

ASTM INTERNATIONAL (ASTM)

100 Barr Harbor Drive, P.O. Box C700 West Conshohocken, PA 19428-2959 Ph: 610-832-9585 Fax: 610-832-9555 E-mail: service@astm.org Internet: http://www.astm.org

BAY AREA AIR QUALITY MANAGEMENT DISTRICT (Bay Area AQMD) 939 Ellis Street San Francisco, CA 94109 Ph: 415-771-6000 Fax: 415-928-8560 E-Mail: publicrecords@baaqmd.gov Internet: http://www.baaqmd.gov/

BIFMA INTERNATIONAL (BIFMA)

678 Front Ave. NW, Suite 150 Grand Rapids, MI 49504-5368 Ph: 616-285-3963 Fax: 616-285-3765 E-mail: email@bifma.org Internet: http://www.bifma.org

BIOCYCLE, JOURNAL OF COMPOSTING AND RECYCLING (BIOCYCLE)

The JG Press Inc.

419 State Avenue Emmaus, PA 18049 Ph: 610-967-4135, Ext. 22 E-mail: biocycle@jgpress.com Internet: http://www.biocycle.net

BRITISH STANDARDS INSTITUTE (BSI)

389 Chiswick High Road London W4 4AL United Kingdom Ph: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001 E-mail: cservices@bsi-global.com or info@bsigroup.com Internet: http://www.bsi-group.com

BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)

355 Lexington Avenue 15th Floor New York, NY 10017 Ph: 212-297-2122 Fax: 212-370-9047 E-mail: assocmgmt@aol.com Internet: http://www.buildershardware.com

CALIFORNIA ENERGY COMMISSION (CEC)

Media and Public Communications Office 1516 Ninth Street, MS-29 Sacramento, CA 95814-5512 Ph: 916-654-4287 Internet: http://www.energy.ca.gov/

CARPET AND RUG INSTITUTE (CRI)

P.O. Box 2048 Dalton, GA 30722-2048 Ph: 800-882-8846 or 706-278-3176 Fax: 706-278-8835 Internet: http://www.carpet-rug.com

CAST IRON SOIL PIPE INSTITUTE (CISPI)

3008 Preston Station Drive

Hixson, TN 37343 Ph: 423-842-2122 Internet: http://www.cispi.org

CEILINGS & INTERIOR SYSTEMS CONSTRUCTION ASSOCIATION (CISCA)

405 Illinois Ave. Unit 2B St. Charles, IL 60174 Ph: 630-584-1919 Fax: 866-560-8537 E-mail: cisca@cisca.org Internet: http://www.cisca.org

CENTERS FOR DISEASE CONTROL AND PREVENTION (CDC)

1600 Clifton Road Atlanta, GA 30333 Ph: 404-639-3311 or 800-232-4636 E-mail: cdcinfo@cdc.gov Internet: http://www.cdc.gov

CHEMICAL FABRICS & FILM ASSOCIATION (CFFA)

1300 Sumner Avenue Cleveland OH 44115-2851 Ph: 216-241-7333 Fax: 216-241-0105 E-mail: cffa@chemicalfabricsandfilm.com Internet: http://www.chemicalfabricsandfilm.com/

CHLORINE INSTITUTE (CI)

1300 Wilson Boulevard Arlington, VA 22209 Ph: 703-741-5760 Fax: 703-741-6068 E-mail: aonna@CL2.com Internet: http://www.CL2.com

COMPOSITE PANEL ASSOCIATION (CPA)

19465 Deerfield Avenue, Suite 306 Leesburg, VA 20176 Ph: 703-724-1128 Fax: 703-724-1588 Internet: http://www.pbmdf.com

COMPRESSED AIR AND GAS INSTITUTE (CAGI)

1300 Sumner Avenue Cleveland OH 44115-2851 Ph: 216-241-7333 Fax: 216-241-0105 E-mail: cagi@cagi.org Internet: http://www.cagi.org/

COMPRESSED GAS ASSOCIATION (CGA)

1451 George Carter Way, Suite 103 Chantilly, VA 20151 Ph: 703-788-2700 Fax: 703-961-1831 E-mail: cga@cganet.com Internet: http://www.cganet.com

CONCRETE REINFORCING STEEL INSTITUTE (CRSI)

933 North Plum Grove Road Schaumburg, IL 60173-4758 Ph: 847-517-1200 or 800-328-6306 Fax: 847-517-1206 Internet: http://www.crsi.org/

CONCRETE SAWING AND DRILLING ASSOCIATION (CSDA)

11001 Danka Way North, Suite 1 St Petersburg, FL 33716

PH: 727-577-5004

Fax: 727-577-5012 E-mail: info@csda.org Internet: http://www.csda.org

CONSUMER ELECTRONICS ASSOCIATION (CEA)

1919 South Eads St.

Arlington, VA 22202 Ph: 866-858-1555 or 703-907-7600 Fax: 703-907-7675 E-mail: cea@CE.org Internet: http://www.CE.org

CONSUMER PRODUCT SAFETY COMMISSION (CPSC)

4330 East-West Highway Bethesda, MD 20814-4408 Ph: 301-504-7923 Fax: 301-504-0124 or 301-504-0025 E-mail: info@cpsc.gov Internet: http://www.cpsc.gov

CONVEYOR EQUIPMENT MANUFACTURERS ASSOCIATION (CEMA)

6724 Lone Oak Boulevard Naples, FL 34109 Ph: 239-514-3441 Fax: 239-514-3470 E-mail: cema@cemanet.org Internet: http://www.cemanet.org

COOLING TECHNOLOGY INSTITUTE (CTI)

2611 FM 1960 West Suite A-101 Houston, TX 77068-3730 Ph: 281-583-4087 Fax: 281-537-1721 E-mail: vmanser@cti.org Internet: http://www.cti.org

COPPER DEVELOPMENT ASSOCIATION (CDA)

260 Madison Avenue New York, NY 10016 Ph: 212-251-7200 Fax: 212-251-7234 E-mail: questions@cda.copper.org Internet: http://www.copper.org

CRANE MANUFACTURERS ASSOCIATION OF AMERICA (CMAA)

8720 Red Oak Boulevard, Suite 201 Charlotte, NC 28217-3992 Ph: 704-676-1190 Fax: 704-676-1199 Internet: www.mhia.org/psc/PSC_Products_Cranes.cfm

CSA AMERICA, INC (CSA/AM)

8501 East Pleasant Valley Road Cleveland, OH 44131-5575 Ph: 216-524-4990 or 877-235-9791 Fax: 216-520-8979 E-mail: sales@csagroup.org Internet: http://www.csa-america.org/

CSA STANDARDS (CSA)

178 Rexdale Blvd.

Toronto, ON, Canada M9W 1R3 Ph: 416-747-4000 E-mail: cathy.rake@csa-america.org Internet: http://www.csa-america.org

DOOR AND HARDWARE INSTITUTE (DHI)

14150 Newbrook Dr.

Chantilly, VA 20151-2232 Ph: 703-222-2010 Fax: 703-222-2410 E-mail: infor@dhi.org Internet: http://www.dhi.org

DISTRICT OF COLUMBIA MUNICIPAL REGULATIONS (DCMR)

1350 Pennsylvania Avenue, NW, Room 419 Washington DC 20004 Ph: 202-727-6306 8:30 a.m. to 5:00 p.m.

Fax: 202-727-3582 E-mail: secretary@dc.gov Internet: http://os.dc.gov/info/odai/odai.shtm

DOOR AND ACCESS SYSTEM MANUFACTURERS ASSOCIATION (DASMA)

1300 Sumner Avenue Cleveland, OH 44115-2851 Ph: 216-241-7333 Fax: 216-241-0105 E-mail: dasma@dasma.com Internet: http://www.dasma.com

DUCTILE IRON PIPE RESEARCH ASSOCIATION (DIPRA)

245 Riverchase Parkway East, Suite O Birmingham, AL 35244 Ph: 205-402-8700 Fax: 205-402-8730 E-mail: info@dipra.org Internet: http://www.dipra.org

ELECTRICAL GENERATING SYSTEMS ASSOCIATION (EGSA)

1650 South Dixie Highway, Suite 400 Boca Raton, FL 33432-7462 Ph: 561-750-5575 Fax: 561-395-8557

E-mail: e-mail@egsa.org Internet: http://www.egsa.org

ELECTRONIC COMPONENTS ASSOCIATION (ECA)

2214 Rock Hill Rd., Suite 170 Herndon, VA 20170 Ph: 571-323-0294 Fax: 571-323-0245 E-mail: emikoski@ecaus.org Internet: http://www.ecaus.org

ELECTRONIC INDUSTRIES ALLIANCE (EIA)

2214 Rock Hill Rd., Suite 170 Herndon, VA 20170 Ph: 571-323-0294 Fax: 571-323-0245 E-mail: infor@ecaus.org Internet: http://www.eia.org

ELECTROSTATIC DISCHARGE ASSOCIATION (ESD)

7900 Turin Road, Building 3 Rome, NY 13440-2069 Ph: 315-339-6937 Fax: 315-339-6793 E-mail: info@esda.org http://www.esda.org/

ENERGY INSTITUTE (EI)

Publications Team Energy Institute 61 New Cavendish Street London

W1G 7AR, UK

Ph: +44 (0)20 7467 7100 Fax: +44 (0)20 7255 1472 Internet:

http://www.energyinstpubs.org.uk/cgi-bin/open.cgi?page=index

ETL TESTING LABORATORIES (ETL)

Intertek Testing Services, ETL SEMKO 70 Codman Hill Road Boxborough, MA 01719 Ph: 978-263-2662 Fax: 978-263-7086 E-mail: info@etlsemko.com Internet: http://www.intertek-etlsemko.com

EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN/CENELEC)

CEN

Avenue Marnix 17 B-1000 Brussels Ph: 32-2-550-08-11 Fax: 32-2-550-08-19 E-mail: infodesk@cenorm.be Internet: http://www.cenorm.be

EXPANSION JOINT MANUFACTURERS ASSOCIATION (EJMA)

25 North Broadway

Tarrytown, NY 10591 Ph: 914-332-0040 Fax: 914-332-1541 E-mail: inquiries@ejma.org Internet: http://www.ejma.org

FLUID CONTROLS INSTITUTE (FCI)

3916 Ranchero Drive Ann Arbor, MI 48108 Ph: 734-780-8000 Fax: 734-780-2046 E-mail: fci@fluidcontrolsinstitute.org Internet: www.fluidcontrolsinstitute.org

FLUID SEALING ASSOCIATION (FSA)

994 Old Eagle School Rd. #1019 Wayne, PA 19087 Ph: 610-971-4850 E-mail: info@fluidsealing.com Internet: www.fluidsealing.com

FM GLOBAL (FM)

270 Central Avenue P.O. Box 7500 Johnston, RI 02919 Ph: 401-275-3000 ext. 1945 Fax: 401-275-3029 E-mail: servicedesk.myrisk@fmglobal.com Internet: http://www.fmglobal.com

FOREST STEWARDSHIP COUNCIL (FSC)

212 Third Avenue North Suite 280 Minneapolis, MN 55401 Ph: 612-353-4511 Fax: 612-208-1565 E-mail: info@fscus.org Internet: http://www.fscus.org

FORESTRY SUPPLIERS INC. (FSUP)

205 West Rankin Street P.O. Box 8397 Jackson, MS 39284-8397 Ph: 800-752-8460 Fax: 601-292-0165 E-mail: cs@forestry-suppliers.com Internet: http://www.forestry-suppliers.com

FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH

(FCCCHR)

University of South California Kaprielian Hall 200 Los Angeles, CA 90089-2531 Ph: 213-740-2032 or 866-545-6340 Fax: 213-740-8399 E-mail: fccchr@usc.edu Internet: http://www.usc.edu/dept/fccchr

GEOLOGICAL SOCIETY OF AMERICA (GeoSA) P.O. Box 9140 Boulder, CO 80301-9140 Ph: 303-447-2020 Fax: 303-357-1070 E-mail: gsaservice@geosociety.org Internet: http://www.geosociety.org Publication available from: http://www.munsellstore.com/

GEOSYNTHETIC INSTITUTE (GSI)

475 Kedron Avenue Folsom, PA 19033 1208 Ph: 610-522-8440 Fax: 610-522-8441 E-mail: mvashley@verizon.net Internet: http://www.geosynthetic-institute.org

GLASS ASSOCIATION OF NORTH AMERICA (GANA)

2945 SW Wanamaker Drive, Suite A Topeka, KS 66614 Ph: 785-271-0208 Fax: 785-271-0166 E-mail: gana@glasswebsite.com Internet: http://www.glasswebsite.com

GREEN BUILDING INITIATIVE (GBI)

2104 SE Morrison Portland, Oregon 97214 Ph: 877-424-4241 Fax: 503.961.8991 Email: info@thegbi.org Internet: http://www.thegbi.org/gbi/

GREEN SEAL (GS)

1001 Connecticut Avenue, NW Suite 827 Washington, DC 20036-5525 Ph: 202-872-6400 Fax: 202-872-4324 E-mail: greenseal@greenseal.org Internet: http://www.greenseal.org

GYPSUM ASSOCIATION (GA)

6525 Belcrest Road, Suite 480 Hyattsville, MD 20782 Ph: 301-277-8686 Fax: 301-277-8747 E-mail: info@gypsum.org Internet: http://www.gypsum.org

HARDWOOD PLYWOOD AND VENEER ASSOCIATION (HPVA)

1825 Michael Faraday Dr.

Reston, VA 20190 Ph: 703-435-2900 Fax: 703-435-2537 E-mail: hpva@hpva.org Internet: http://www.hpva.org

HEAT EXCHANGE INSTITUTE (HEI)

1300 Sumner Avenue Cleveland, OH 44115-2851 Ph: 216-241-7333 Fax: 216-241-0105 E-mail: hei@heatexchange.org Internet: http://www.heatexchange.org

H.P. WHITE LABORATORY (HPW)

3114 Scarboro Road Street, MD 21154 Ph: 410-838-6550 Fax: 410-838-2802 E-mail: info@hpwhite.com Internet: http://www.hpwhite.com

HYDRAULIC INSTITUTE (HI)

6 Campus Drive, First Floor North Parsippany, NJ 07054-4406 Ph: 973-267-9700 Fax: 973-267-9055 E-mail: webmaster@pumps.org Internet: http://www.pumps.org

HYDRONICS INSTITUTE DIVISION OF GAMA (HYI)

35 Russo Place P.O. Box 218 Berkeley Heights, NJ 07922-0218 Ph: 908-464-8200 Fax: 908-464-7818 E-mail: information@gamanet.org Internet: http://www.gamanet.org

ICC EVALUATION SERVICE, INC. (ICC-ES)

5360 Workman Mill Road Whitier, CA 90601 Ph: 562-699-0543 Fax: 562-695-4694 E-mail: es@icc-es.org Internet: http://www.icc-es.org

ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IES)

120 Wall Street, 17th Floor New York, NY 10005 Ph: 212-248-5000 Fax: 212-248-5018 E-mail: IES@IES.org Internet: http://www.IES.org

INDUSTRIAL FASTENERS INSTITUTE (IFI)

6363 Oak Tree Boulevard Independance, OH 44131 Ph: 216-241-1482 Fax: 216-241-5901 E-mail: IFI-orders@indfast.org Internet: http://www.industrial-fasteners.org

INSTITUTE OF INSPECTION, CLEANING, AND RESTORATION CERTIFICATION

(IICRC)

IICRC Administrative Office 2715 E Mill Plain Blvd.

Vancouver, WA 98661 Ph: 360-693-5675 Fax: 360-693-4858 Internet: http://www.iicrc.org/home

INTERNATIONAL SAFETY EQUIPMENT ASSOCIATION (ISEA)

1901 North Moore Street Arlington, VA 22209-1762 Ph: 703-525-1695 Fax: 703-528-2148 E-mail: isea@safety equipment.org Internet: http://www.safetyequipment.org/

INSTITUTE OF TRANSPORTATION ENGINEERS (ITE)

1099 14th Street, Suite 300 West Washington, DC 20005-3438 Ph: 202-289-0222 Fax: 202-289-7722 E-mail: ite_staff@ite.org Internet: http://www.ite.org

INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA)

703 Waterford Way (NW 62nd Avenue), Suite 600 Miami, FL 33126 Ph: 305-264-7772 Fax: 305-264-8088 Internet: http://www.iata.org

INSTITUTE OF CLEAN AIR COMPANIES (ICAC)

2025 M Street NW, Suite 800 Washington, DC 20036 Ph: 202-367-1114 Fax: 202-367-2114 E-mail: icacinfo@icac.com Internet: http://www.icac.com

INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)

445 Hoes Lane or 2001 L Street, NW. Suite 700 Piscataway, NJ 08855-1331 or Washington, DC 20036-4910 USA Ph: 732-981-0060 or 800-701-4333 Fax: 732-562-6380 E-mail: onlinesupport@ieee.org or ieeeusa@ieee.org Internet: http://www.ieee.org

INSTITUTE OF ENVIRONMENTAL SCIENCES AND TECHNOLOGY (IEST)

2340 South Arlington Heights Rd. Suite 620 Arlington Heights, IL 60005-4516 Ph: 847-981-0100 Fax: 847-981-4130 E-mail: iest@iest.org Internet: http://www.iest.org

INSTRUCTIONS AND STANDARDS FOR NAVBASE GUANTANAMO BAY CUBA

(COMNAVBASEGTMOINST)

Address Not Available

INSULATED CABLE ENGINEERS ASSOCIATION (ICEA)

P.O. Box 1568 Carrollton, GA 30112 E-mail:

http://www.icea.net/Public_Pages/Contact/Email_Contact.html Internet: http://www.icea.net

INSULATING GLASS MANUFACTURERS ALLIANCE (IGMA)

27 N. Wacker Dr. Suite 365 Chicago, IL 60606-2800 Ph: 613-233-1510 Fax: 613-482-9436 E-mail: info@igmaonline.org Internet: http://www.igmaonline.org

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS

(IAPMO)

4755 E. Philadelphia St.

Ontario, CA 91761 Ph: 909-472-4100 Fax: 909-472-4150 E-mail: iapmo@iapmo.org Internet: http://www.iapmo.org

INTERNATIONAL CODE COUNCIL (ICC)

5360 Workman Mill Road Whittier, CA 90601 Ph: 562-699-0541 Fax: 562-699-8031 E-mail: webmaster@iccsafe.org Internet: www.iccsafe.org

INTERNATIONAL CONCRETE REPAIR INSTITUTE (ICRI)

3166 South River Road, Suite 132 Des Plaines, IL 60018 Ph: 847-827-0830 Fax: 847-827-0832 Internet: http://www.icri.org

INTERNATIONAL ELECTRICAL TESTING ASSOCIATION (NETA)

3050 Old Centre Ave. Suite 102 Portage, MI 49024 Ph: 269-488-6382 Fax: 269-488-6383 E-mail: neta@netaworld.org Internet: http://www.netaworld.org

INTERNATIONAL ELECTROTECHNICAL COMMISSION (IEC)

3, rue de Varembe, P.O. Box 131 CH-1211 Geneva 20, Switzerland Ph: 41-22-919-0211 Fax: 41-22-919-0300 E-mail: custserv@iec.ch Internet: http://www.iec.ch

INTERNATIONAL GROUND SOURCE HEAT PUMP ASSOCIATION (IGSHPA)

Oklahoma State University 374 Cordell South

Stillwater OK 74078-8018 Ph: 405-744-5175 Fax: 405-744-5283 E-mail: igshpa@okstate.edu Internet: http://www.igshpa.okstate.edu/

INTERNATIONAL INSTITUTE OF AMMONIA REFRIGERATION (IIAR)

1110 North Glebe Road, Suite 250 Arlington, VA 22201 Ph: 703-312-4200 Fax: 703-312-0065 E-mail: info@iiar.org or iiar_request@iiar.org Internet: http://www.iiar.org

INTERNATIONAL MUNICIPAL SIGNAL ASSOCIATION (IMSA)

P.O. Box 539 165 East Union Street Newark, NY 14513-0539 Ph: 315-331-2182 and 800-723-4672 Fax: 315-331-8205 E-mail: info@imsasafety.org Internet: http://www.imsasafety.org/

INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)

1, ch. de la Voie-Creuse Case Postale 56 CH-1211 Geneve 20 Switzerland Ph: 41-22-749-01-11 Fax: 41-22-733-34-30 E-mail: central@iso.ch Internet: http://www.iso.org

INTERNATIONAL TELECOMMUNICATION UNION (ITU)

For documents not available from Dept of Commerce:

Sales Service International Telecommunication Union Place des Nations CH-1211 Geneve 20 Switzerland Ph: 41-22-730-5111 Fax: 41-22-733-7256 E-mail: itumail@itu.int Internet: http://www.itu.org

For documents available from Dept of Commerce:

U.S. Dept of Commerce National Technical Information Service (NTIS) 5301 Shawnee Road Alexandria, VA 22312 Ph: 703-605-6050 or 1-888-584-8332

FAX: 703-605-6887

E-mail: info@ntis.gov Internet: http://www.ntis.gov

IPC - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)

3000 Lakeside Drive, 309S Bannockburn, IL 60015 Ph: 847-615-7100 Fax: 847-615-7105

E-mail: webmaster@ipc.org Internet: http://www.ipc.org

ISA - INTERNATIONAL SOCIETY OF AUTOMATION (ISA)

67 T W Alexander Drive Research Triangle Park, NC 27709 Ph: 919-549-8411 Fax: 919-549-8288 E-mail: info@isa.org Internet: http://www.isa.org

INTERNATIONAL WINDOW CLEANING ASSOCIATION (IWCA)

400 Admiral Blvd Kansas City, MO 64106 Ph: 800-875-4922 or 816-471-4922 E-mail: info@iwca.org Internet: http://www.iwca.org

THE INTERNET ENGINEERING TASK FORCE (IETF)

IETF, Internet Society 48377 Fremont Blvd., Suite 117 Fremont, California 94538 Ph: 510-492-4080 Fax: 510-492-4001 E-mail: ietf-info@ietf.org Internet: http://www.rfc-editor.org/

ITALIAN LAWS AND DECREES (D.M.)

Internet: http://www.nyulawglobal.org/globalex/Italy2.htm

KITCHEN CABINET MANUFACTURERS ASSOCIATION (KCMA)

1899 Preston White Drive Reston, VA 20191-5435 Ph: 703-264-1690 Fax: 703-620-6530 E-mail: info@kcma.org Internet: http://www.kcma.org

L.H. BAILEY HORTORIUM (LHBH)

Dept of Plant Biology c/o Cornell University 412 Mann Library Building Ithaca, NY 14853 Ph: 607-255-4477(Dr. William L.Crepet) Internet: http://www.plantbio.cornell.edu/Hort.html

LONMARK INTERNATIONAL (LonMark) 550 Meridan Ave.

San Jose, CA 95126 Ph: 408-938-5266 Fax: 408-790-3838 E-mail: info@lonmark.org Internet: http://www.lonmark.org

MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS

INDUSTRY (MSS)

127 Park Street, NE Vienna, VA 22180

Ph: 703-281-6613 Fax: 703-281-6671 E-mail: info@mss-hq.com Internet: http://www.mss-hq.com

MAPLE FLOORING MANUFACTURERS ASSOCIATION (MFMA)

111 Deer Lake Road, Suite 100 Deerfield, IL 60015 Ph: 847-480-9138 Fax: 847-480-9282 E-mail: mfma@maplefloor.org Internet: http://www.maplefloor.org

MARBLE INSTITUTE OF AMERICA (MIA)

28901 Clemens Road, Suite 100 Cleveland, OH 44145 Ph: 440-250-9222 Fax: 440-250-9223 E-mail: info@marble-institute.com Internet: http://www.marble-institute.com

MASTER PAINTERS INSTITUTE (MPI)

2800 Engleton Avenue Burnaby, BC CANADA V5C 6G7 Ph: 1-888-674-8937 Fax: 1-888-211-8708 E-mail: info@paintinfo.com,jody@mpi.net,bgl@mpi.net Internet: http://www.paintinfo.com/mpi

MATERIAL HANDLING INDUSTRY OF AMERICA INC (MHIA)

8720 Red Oak Blvd., Suite 201 Charlotte, NC 28717-3992 Ph: 704-676-1190 Fax: 704-676-1199 Internet: http://www.mhia.org

METAL BUILDING MANUFACTURERS ASSOCIATION (MBMA)

1300 Sumner Avenue Cleveland, OH 44115-2851 Ph: 216-241-7333 Fax: 216-241-0105 E-mail: mbma@mbma.com Internet: http://www.mbma.com

MIDWEST INSULATION CONTRACTORS ASSOCIATION (MICA)

16712 Elm Circle Omaha, NE 68130 Ph: 800-747-6422 Fax: 402-330-9702 E-mail: mica@tconl.com Internet: http://www.micainsulation.org

MIDWEST ROOFING CONTRACTORS ASSOCIATION (MRCA)

4840 Bob Billings Parkway, Suite 1000 Lawrence, Kansas 66049-3862 Ph: 785-843-4888 or 800-497-6722 Fax: 785-843-7555 E-mail: mrca@mrca.org

Internet: General Information: http://www.mrca.org

MODBUS ORGANIZATION, INC (MODBUS)

PO Box 628 Hopkinton, MA 01748 Ph: 508-435-7170 Fax: 508-435-7172 E-mail: see Internet page "Contact Us" Internet: http://www.modbus.org

NACE INTERNATIONAL (NACE)

1440 South Creek Drive Houston, TX 77084-4906 Ph: 281-228-6223 Fax: 281-228-6300 E-mail: firstservice@nace.org Internet: http://www.nace.org

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)

Superintendent of Documents at U.S. Government Printing Office 732 North Capitol Street, NW Washington, DC 20401-0001 Ph: 202-783-3238 Fax: 202-512-1800 E-mail: ContactCenter@gpo.gov Internet: http://www.nasa.gov or http://www.gpoaccess.gov/help

NATIONAL AIR DUCT CLEANERS ASSOCIATION (NADCA)

1518 K Street, NW Suite 503 Washington, DC 20005 Ph: (202) 737-2926 Fax: (202) 347-8847 E-mail: info@nadca.com Internet: http://www.nadca.com

NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)

800 Roosevelt Road, Bldg C, Suite 312 Glen Ellyn, IL 60137 Ph: 630-942-6591 Fax: 630-790-3095 E-mail: wlewis7@cox.net(Vernon Lewis,technical consultant) Internet: http://www.naamm.org

NATIONAL BOARD OF BOILER AND PRESSURE VESSEL INSPECTORS (NBBI)

1055 Crupper Avenue Columbus, OH 43229-1183 Ph: 614-888-8320 Fax: 614-888-0750 E-mail: available on website Internet: http://www.nationalboard.org

NATIONAL CABLE AND TELECOMMUNICATIONS ASSOCIATION (NCTA)

25 Massachusetts Avenue, NW, Suite 100 Washington, DC 20001-1413

Ph: 202-222-2300 E-mail: webmaster@ncta.com Internet: http://www.ncta.com

NATIONAL CONCRETE MASONRY ASSOCIATION (NCMA)

13750 Sunrise Valley Drive Herndon, VA 20171-4662 Ph: 703-713-1900 Fax: 703-713-1910 E-mail: mterrell@ncma.org (Mary Arntson) Internet: http://www.ncma.org/Pages/default.aspx

NATIONAL COUNCIL ON RADIATION PROTECTION AND MEASUREMENTS (NCRP)

7910 Woodmont Avenue, Suite 400 Bethesda, MD 20814-3095 Ph: 301-657-2652 Fax: 301-907-8768 E-mail: ncrppubs@ncrpponline.org Internet: http://www.ncrp.com

NATIONAL DRILLING ASSOCIATION (NDA)

1545 W.130th St, Suite A2 Hinckley, OH 44233 Ph: 877-632-4748 Fax: 216-803-9900 E-mail: form available online Internet: http://www.nda4u.com/

NATIONAL ELECTRICAL CONTRACTORS ASSOCIATION (NECA)

3 Bethesda Metro Center, Suite 1100 Bethesda, MD 20814 Ph: 301-657-3110 Fax: 301-215-45002 Internet: http://www.necanet.org/

NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)

1300 North 17th Street, Suite 1752 Rosslyn, VA 22209 Ph: 703-841-3200 Fax: 703-841-5900 Internet: http://www.nema.org/

NATIONAL ELEVATOR INDUSTRY, INC. (NEII)

1677 County Route 64 P.O. Box 838 Salem, New York 12865-0838 Ph: 518-854-3100 Fax: 518-854-3257 E-Mail: into@neii.org Internet: http://www.neii.org/index.cfm

NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB)

8575 Grovemont Circle Gaithersburg, MD 20877 Ph: 301-977-3698 Fax: 301-977-9589 E-Mail: elana@nebb.org Internet: http://www.nebb.org

NATIONAL FENESTRATION RATING COUNCIL (NFRC)

6305 Ivy Lane, Suite 140 Greenbelt, MD 20770 Ph: 301-589-1776 Fax: 301-589-3884 E-Mail: info@nfrc.org Internet: http://www.nfrc.org

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

1 Batterymarch Park Quincy, MA 02169-7471 Ph: 617-770-3000 or 800-344-3555 Fax: 617-770-0700 E-mail: webmaster@nfpa.org Internet: http://www.nfpa.org

NATIONAL FLUID POWER ASSOCIATION (NFLPA)

3333 North Mayfair Road, Suite 211 Milwaukee, WI 53222-3219 Ph: 414-778-3344 Fax: 414-778-3361 E-mail: nfpa@nfpa.com Internet: http://www.nfpa.com

NATIONAL HARDWOOD LUMBER ASSOCIATION (NHLA)

6830 Raleigh LaGrange Road Memphis, TN 38184-0518 Ph: 901-377-1818 E-mail: info@nhla.com Internet: http://www.natlhardwood.org

NATIONAL INSTITUTE FOR CERTIFICATION IN ENGINEERING TECHNOLOGIES

(NICET)

1420 King Street Alexandria, VA 22314-2794 Ph: 888-476-4238 (1-888 IS-NICET) E-mail: tech@nicet.org Internet: http://www.nicet.org

NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH (NIOSH)

Mail Stop C-34 4676 Columbia Parkway Cincinnati, OH 45226 Ph: 513-533-8611 Fax: 513-533-8285 E-mail:…