FA489724QC004 Amendment.pdf

Mountain Home Air Force Base, Idaho

In accordance with FAR PART 12.603(c)(2): This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This solicitation, FA489724QC004, is being issued as a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2024-01.

Acquisition Information

RFQ Issued By: 366 FAS/PKA

(Contracting)

Quotes/Offers are Due: Date Issued: March 27, April 26, 2024 by 10 AM/PM Local time (MST)

Contract Administrator: Jaclyn Fish Phone: (208) 828-3693

E-Mail: Jacklyn.fish@us.af.mil

Contracting Officer: Elizabeth Hughes Phone: (208) 828-3109

E-Mail: Elizabeth.hughes.5@us.af.mil

NAICS: 221320

SB Size

Standard:

$35 Million

Type of Set-

Aside:

None

Small Business

Small Disadvantage

Business

Veteran-Owned Small

Business

Woman Owned Small Business

HUBZone

Section 8(a)

Service-Disabled Veteran-Owned

Small Business

This is a 100% Total Small Business Set-aside.

The government intends to award a Firm Fixed-Price Contract

ATTACHMENT(s):

1. Performance Work Statement (PWS), Dated 27 September 2023

2. Base Access Procedures

3. SCA Wage Determination (WD) 2015-5513 Rev. 21

4. Over and Above Bid Sheet

Amendment

Quote Submission Information

ADDENDUM TO FAR 52.212-1

ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

(NOV 2021)

It is emphasized that this is solicitation is issued in accordance with the procedures of FAR Parts 13 and

13.106-2(b)(3), which are intended to streamline source selection and be minimally burdensome for both the US Government and the quoters interested in competing for this requirement. Any references in the solicitation to offer/offeror shall be deemed to mean quotation/quoter.

Instructions to Offerors-Commercial Items, quotes shall also consist of the following:

1) SUBMISSION INFORMATION: The contractor shall submit a signed copy of this Combined

Synopsis/Request for Quote. All solicitation amendments must be acknowledged or signed and returned with the quote. The contractor shall also submit their Idaho Class III Wastewater Treatment Plant

Operator and Land Application Operator certification IAW the PWS section IV.

2) PAST PERFORMANCE: If available, the contractor may submit past performance data on similar contracts as this requirement.

Quote Response Date & Time:

Each quoter must submit all documents to both Jaclyn.fish@us.af.mil and Elizabeth.hughes.5@us.af.mil by the closing date stated on page one (1). Clearly identify RFQ# FA489723QC004 in the subject line.

All quoters are responsible for verifying if their quote was received by the contracting office. You may wish to place a read/delivery receipt. Offerors are advised that delays can be experienced with the

Government’s e-mail system. Additionally, the e-mail system capacity for each e-mail is 10MB (better if smaller). E-mails greater than 10MB will not be delivered and will not be considered. Therefore, quotes exceeding the size limit must be sent via multiple e-mails.

Note: .zip files are not an acceptable format for the Air Force Network and will not go through our email system.

Questions Response Date & Time:

All questions regarding this RFQ must be emailed to Elizabeth.hughes.5@us.af.mil and

Jaclyn.fish@us.af.mil by 10:00 A.M. MST on April 16, 2024. Other methods of submitting questions are not authorized and will not be acknowledged or addressed.

mailto:Elizabeth.hughes.5@us.af.mil

ADDITIONAL IMPORTANT INFORMATION:

1. The Quoter agrees to hold the prices in its quote firm for 60 calendar days from the date specified for receipt of the Quote.

2. System for Award Management (SAM). The Contractor shall be registered in the SAM database and be registered under this solicitations NAICS at time of submission of response. Further information and guidance regarding SAM can be found at the SAM website: www.sam.gov.

3. Each quote should contain the contractor's best terms from a price and technical standpoint. It is the contractor’s responsibility to ensure that there are no discrepancies presented within the information contained in its quote. Potential quoters are hereby notified that in the event there are discrepancies within information in a quote will be rejected.

4. By signing this RFQ, Offeror is agreeing to the Provisions and Clauses as indicated within this solicitation.

5. Site Visit: The Waste Water Treatment Plant will be available for prospective offerors to visit on April 10, 2024 at 1000-1200 MST. Please RSVP by April 5 at 1200 MST by sending an email to elizabeth.hughes.5@us.af.mil in order to receive more detailed instructions. Ensure that chosen attendee is allowed on Mountain Home AFB – see Attachment 3 – MHAFB Entry Requirements to ensure chosen representative may enter the installation.

FAR Provision 52.212-2, Evaluation -- Commercial Items (Nov 2021), applies to this acquisition and the following evaluation is applicable.

The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

- Price

- Past Performance

Total Evaluated Price (TEP): The Government will evaluate quoted prices by adding the total price for all options to the total price for the base year, to arrive at a total evaluated price (TEP). In determining whether a price is fair and reasonable, the government may use historical data, independent Government estimates in its price analysis, or any other technique permissible by FAR 12 and FAR 13.

The TEP will be calculated as follows:

a) The sum of the extended prices (unit quantity multiplied by unit price) for CLIN’s for the base performance period and option periods one (1) through four (4); and

Amendment to site visit date.

mailto:elizabeth.hughes.5@us.af.mil http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/52_000.htm#P1130_159445

b) To account for the maximum six-month extension possible under the clause at FAR 52.217-8, Option to Extend Services, the Government will take the quoted price of the final option period

(CLIN 4001-4003), prorate it to a six-month value, and add that amount to the sum of all CLINS

(base performance period and option periods one (1) through four (4)). The resulting amount will be the TEP. Evaluation of options shall not obligate the Government to exercise the option(s).

1. Past Performance: Past performance submitted by the offeror will be evaluated using the rating scheme below. In the case of an offeror who does not submit past performance data with the quote, the past performance will be evaluated by considering data available in the Contractor Performance

Assessment Reporting System (CPARS) and Federal Awardee Performance and Integrity

Information System (FAPIIS). Only quotes receiving a rating of “Acceptable” will be further evaluated for the award. Any unsatisfactory or negative actions in CPARS or FAPIIS may render your quote unacceptable.

Rating Description

Acceptable Based on the Quoter’s performance record, the Government has a reasonable Expectation that the Quoter will successfully perform the required effort, or the Quoter’s performance record is unknown (see note below).

Unacceptable Based on the Quoter’s performance record, the Government has no reasonable expectation that the Quoter will be able to successfully perform

* In the case of a supplier without a record of relevant past performance history in CPARS and

FAPIIS for the FSC or PSC of the supplies/services being purchased, the vendor will not be evaluated favorably or unfavorably for its past performance history.

Award will be made to the offeror that represents the best value to the Government, considering price and past performance. This may result in the Government awarding to an offeror other than the lowest priced. Offers shall submit their bid using the CLIN structure found below. Offers shall also fill out and submit the excel sheet titled Over and Above CLIN for their bid for CLINS 0003, 1003, 2003, 3003, 4003. If an offeror with no past performance history has a lower TEP than an offeror with high past performance ratings in CPARS, the Government may elect to award to the offeror with high past performance ratings if determined to be the best value to the Government.

Note: A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of Provision

Offeror’s Information

Offeror Name &

Address:

POC:

CAGE: Phone:

UEI:

(Unique

Entity

Identifier)

Fax:

(Not

Required)

Tax ID: (Not required w/ active SAM registration)

E-Mail

* The offeror is not mandated to use this page of this RFQ; however, if you chose not to use it, all of the information under Offerors information above shall be included in your submitted offer.

The following is the proposed Bid Schedule / Contract Line item(s) (CLIN) which will be used in the contract award:

ITEM

DESCRIPTION

QTY

UNIT

UNIT PRICE

TOTAL PRICE

Operation of Wastewater Treatment Plant IAW the PWS

MO

0002 Maintenance of Wastewater Treatment Plant

IAW the PWS

NTE Over and Above

Contractors shall use the attached bid sheet labeled

Over and Above Bid Sheet to submit price for this

CLIN.

Biosolids Disposal 6

1001 Operation of Wastewater Treatment Plant IAW the PWS

MO

1002 Maintenance of Wastewater Treatment Plant

IAW the PWS

MO

1003 NTE Over and Above Contractors shall use the attached bid sheet labeled

1004 Biosolids Disposal 12

2001 Operation of Wastewater Treatment Plant IAW the PWS

MO

2002 Maintenance of Wastewater Treatment Plant

IAW the PWS

MO

2003 NTE Over and Above Contractors shall use the attached bid sheet labeled

2004 Biosolids Disposal 12

3001 Operation of Wastewater Treatment Plant IAW the PWS

MO

3002 Maintenance of Wastewater Treatment Plant

IAW the PWS

MO

3003 NTE Over and Above Contractors shall use the attached bid sheet labeled

3004 Biosolids Disposal 12

4001 Operation of Wastewater Treatment Plant IAW the PWS

MO

4002 Maintenance of Wastewater Treatment Plant

IAW the PWS

MO

4003 NTE Over and Above Contractors shall use the attached bid sheet labeled

4004 Biosolids Disposal 12

Total Evaluated Price $

52.232-18 Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer.

PERFORMANCE PERIOD:

The contractor shall begin performance on 1 July 2024. The period performance is as follows:

Base Year: 1 July 2024 – 31 December 2024

Option Year (OY) 1: 1 January 2025 – 31 December 2025

OY 2: 1 January 2026 – 31 December 2026

OY 3: 1 January 2027 – 31 December 2027

OY 4: 1 January 2028 – 31 December 2028

PAYMENT TERMS & DELIVERY:

The Government shall consider your “DISCOUNT TERMS” to be NET 30

FOB Destination

ADDITIONAL INFORMATION (for Offeror Use):

Please have an authorized company representative sign this form.

(Insert Name and Title) (Signature) (Date)

See attached Solicitation/ Contract Provisions and Clauses.

All Interested Vendors are encouraged to fill out any required Representations and Certifications

Clauses & Provisions on their SAM Company profile for consideration and eligibility.

DOCUMENT NUMBER SOLICITATION NUMBER

FA489724QC004 (Not Set)

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

SECTION

252.201-7000 Contracting Officer's Representative. 1991-12 SEC G

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09 SEC K

252.204-7004 Antiterrorism Awareness Training for Contractors. 2023-01 SEC I

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10 SEC K

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

2023-01 SEC I

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support.

2023-01 SEC I

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

2021-05 SEC K

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01 SEC I

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC I 252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.205-7000 Provision of Information to Cooperative Agreement Holders. 2023-06 SEC I 252.211-7007 Reporting of Government-Furnished Property. 2022-03 SEC I 252.217-7028 Over and Above Work. 1991-12 SEC I 252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements. 2023-01 SEC I 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01 SEC I

252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.

2023-01 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I

252.232-7011 Payments in Support of Emergencies and Contingency Operations.

2013-05 SEC I

252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel.

2023-01 SEC I

252.242-7005 Contractor Business Systems. 2012-02 SEC I 252.243-7002 Requests for Equitable Adjustment. 2022-12 SEC I

252.244-7000 Subcontracts for Commercial Products or Commercial Services.

2023-11 SEC I

252.245-7001 Tagging, Labeling, and Marking of Government-Furnished Property.

2012-04 SEC E

252.245-7002 Reporting Loss of Government Property 2021-01 SEC I 252.245-7003 Contractor Property Management System Administration 2012-04 SEC I

52.201-1 Acquisition 360: Voluntary Survey. 2023-09 SEC L 52.203-3 Gratuities. 1984-04 SEC I 52.204-13 System for Award Management Maintenance. 2018-10 SEC I

52.204-16 Commercial and Government Entity Code Reporting. 2020-08 SEC L 52.204-18 Commercial and Government Entity Code Maintenance. 2020-08 SEC I

52.204-29 Federal Acquisition Supply Chain Security Act Orders- Representation and Disclosures.

2023-12 SEC K

52.204-7 System for Award Management. 2018-10 SEC L

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services.

2023-09 SEC L

52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services.

2023-11 SEC I

52.223-10 Waste Reduction Program. 2011-05 SEC I 52.223-19 Compliance with Environmental Management Systems. 2011-05 SEC I 52.223-5 Pollution Prevention and Right-to-Know Information. 2011-05 SEC I 52.245-1 Government Property. 2021-09 SEC I

52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.

2021-11 SEC K

52.209-7 Information Regarding Responsibility Matters. 2018-10 SEC K

52.223-22 Public Disclosure of Greenhouse Gas Emissions and Reduction Goals-Representation.

2016-12 SEC K

52.229-11 Tax on Certain Foreign Procurements-Notice and Representation.

2020-06 SEC K

52.245-9 Use and Charges. 2012-04 SEC I

52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

2021-11 SEC I

52.204-26 Covered Telecommunications Equipment or Services- Representation.

2020-10 SEC K

52.222-56 Certification Regarding Trafficking in Persons Compliance Plan.

2020-10 SEC L

52.249-1 ALT I Termination for Convenience of the Government (Fixed-Price) (Short Form). (Alternate I)

1984-04 SEC I

52.249-8 ALT I Default (Fixed-Price Supply and Service). (Alternate I) 1984-04 SEC I

252.225-7966 DEV 2024-O0006 Prohibition Regarding Russian Fossil Fuel Business Operations-Representation (Deviation 2024-O0006)

2024-02 SEC K

252.225-7967 DEV 2024-O0006 Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006)

2024-02 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

CLAUSE TEXT

52.217-5 Evaluation of Options. 1990-07

As prescribed in , insert a provision substantially the same as the following:17.208(c)

Evaluation of Options (July 1990)

Except when it is determined in accordance with FAR 17.206(b) not to be in the Government’s best interests, the Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. Evaluation of options will not obligate the Government to exercise the option(s).

(End of provision)

252.211-7003 Item Unique Identification and Valuation. 2023-01

As prescribed in 211.274-5(a), use the following clause:

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" " means the entity (e.g., a manufacturer or vendor) responsible for assigning Enterprise unique item identifiers to items.

" identifier" means a code that is uniquely assigned to an enterprise by an issuing Enterprise agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" or batch number" means an identifying number assigned by the enterprise to a Lot designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again.

The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment.

The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

0003, 1003, 2003, 3003, 4003

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology -

EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary;

and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle (3) Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) identifier (if concatenated unique item identifier is used). Enterprise

(5) Original part number (if there is serialization within the original part number).

(6) or batch number (if there is serialization within the lot or batch number). Lot

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) identifier (if concatenated unique item identifier is used).** Enterprise

(6) Original part number (if there is serialization within the original part number).**

(7) or batch number (if there is serialization within the lot or batch number).** Lot

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site /uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , ____ Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique Subcontracts identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

252.215-7008 Only One Offer. 2022-12

As prescribed at 215.408(3), use the following provision:

ONLY ONE OFFER (DEC 2022)

(a) . After initial submission of offers, if the Contracting Cost or pricing data requirements Officer notifies the Offeror that only one offer was received, the Offeror agrees to-

(1) Submit any additional cost or pricing data that is required in order to determine whether the price is fair and reasonable (10 U.S.C. 3705) or to comply with the statutory requirement for certified cost or pricing data (10 U.S.C. 3702 and FAR 15.403-3); and

(2) Except as provided in paragraph (b) of this provision, if the acquisition exceeds the certified cost or pricing data threshold and an exception to the requirement for certified cost or pricing data at FAR 15.403-1(b)(2) through (5) does not apply, certify all cost or pricing data in accordance with paragraph (c) of DFARS provision 252.215-7010, Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data, of this solicitation.

(b) . If the Offeror is the Canadian Commercial Corporation, Canadian Commercial Corporation certified cost or pricing data are not required. If the Contracting Officer notifies the Canadian Commercial Corporation that additional data other than certified cost or pricing data are required in accordance with DFARS 225.870-4(c), the Canadian Commercial Corporation shall obtain and provide the following:

(1) Profit rate or fee (as applicable).

(2) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at

FAR 15.404-1).

(3) Data other than certified cost or pricing data necessary to permit a determination by the U.

S. Contracting Officer that the proposed price is fair and reasonable a complete cost breakdown of labor, [materials, profit, G&A, overhead U.S. Contracting Officer to provide description of the data required in ].accordance with FAR 15.403-3(a)(1) with the notification

(4) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.

(c) . Unless the Offeror is the Canadian Commercial Corporation, the Offeror shall Subcontracts insert the substance of this provision, including this paragraph (c), in all subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.

(End of provision)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process Electronic invoicing.

vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, WAWF methods of document submission.

Electronic Data Interchange, or File Transfer Protocol.

(f) The Contractor shall use the following information whenWAWF payment instructions.

submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the followingDocument type.

document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2 in 1 Invoice

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data TableDocument routing.

below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC _FA4897___

Admin DoDAAC _FA4897___

Inspect By DoDAAC __F3F3CE__

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ___F3F3CE_

Service Acceptor (DoDAAC) _F3F3CE___

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentationPayment request.

appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirementsReceiving report.

of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

_366CONS.PKA.Services_Commodities@us.af.mil and Guy.Cumber@us.af.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

252.245-7004 Reporting, Reutilization, and Disposal 2017-12

As prescribed in 245.107(5), use the following clause:

REPORTING, REUTILIZATION, AND DISPOSAL (DEC 2017)

(a) As used in this clause-Definitions.

(1) "Demilitarization" means the act of eliminating the functional capabilities and inherent military design features from DoD personal property. Methods and degree range from removal and destruction of critical features to total destruction by cutting, tearing, crushing, mangling, shredding, melting, burning, etc.

(2) "Export-controlled items" means items subject to the Export Administration Regulations (EAR) (15 CFR parts 730-774) or the International Traffic in Arms Regulations [(ITAR)] (22 CFR parts 120-130). The term includes-

(i) "Defense items," defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, etc.; and

(ii) "Items," defined in the EAR as "commodities," "software," and "technology," terms that are also defined in the EAR, 15 CFR 772.1.

(3) "Ineligible transferees" means individuals, entities, or countries-

(i) Excluded from Federal programs by the General Services Administration as identified in the System for Award Management Exclusions located at https://www.acquisition.gov;

(ii) Delinquent on obligations to the U.S. Government under surplus sales contracts;

(iii) Designated by the Department of Defense as ineligible, debarred, or suspended from defense contracts; or

(iv) Subject to denial, debarment, or other sanctions under export control laws and related laws and regulations, and orders administered by the Department of State, the Department of Commerce, the Department of Homeland Security, or the Department of the Treasury.

(4) "Scrap" means property that has no value except for its basic material content. For purposes of demilitarization, scrap is defined as recyclable waste and discarded materials derived from items that have been rendered useless beyond repair, rehabilitation, or restoration such that the item's original identity, utility, form, fit, and function have been destroyed. Items can be classified as scrap if processed by cutting, tearing, crushing, mangling, shredding, or melting. Intact or recognizable components and parts are not "scrap."

(5) "Serviceable or usable property" means property with potential for reutilization or sale "as is" or with minor repairs or alterations.

(b) Unless disposition instructions are otherwise included in this Inventory disposal schedules.

contract, the Contractor shall complete SF 1428, Inventory Schedule B, within the Plant Clearance Automated Reutilization Screening System (PCARSS). Information on PCARSS can be obtained from the plant clearance officer and at http://www.dcma.mil/WBT/PCARSS/.

(1) The SF 1428 shall contain the following:

(i) If known, the applicable Federal Supply Code (FSC) for all items, except items in scrap condition.

(ii) If known, the manufacturer name for all aircraft components under Federal Supply Group (FSG) 16 or 17 and FSCs 2620, 2810, 2915, 2925, 2935, 2945, 2995, 4920, 5821, 5826, 5841, 6340, and 6615.

(iii) The manufacturer name, make, model number, model year, and serial number for all aircraft under FSCs 1510 and 1520.

(iv) See Appendix 2 of DLM 4000.25-2, Military Appropriate Federal Condition Codes.

Standard Transaction Reporting and Accounting Procedures (MILSTRAP) manual, edition in effect as of the date of this contract. Information on Federal Condition Codes can be obtained at http://www.dla.mil /HQ/InformationOperations/DLMS/elibrary/manuals/MILSTRAP/.

(2) If the schedules are acceptable, the plant clearance officer shall complete and send the Contractor a DD Form 1637, Notice of Acceptance of Inventory.

(c) Unless otherwise provided in the contract, the Proceeds from sales of surplus property.

proceeds of any sale, purchase, or retention shall be-

(1) Forwarded to the Contracting Officer;

(2) Credited to the Government as part of the settlement agreement;

(3) Credited to the price or cost of the contract; or

(4) Applied as otherwise directed by the Contracting Officer.

(d) If demilitarization, mutilation, or destruction of Demilitarization, mutilation, and destruction.

contractor inventory is required, the Contractor shall demilitarize, mutilate, or destroy contractor inventory, in accordance with the terms and conditions of the contract and consistent with Defense Demilitarization Manual, DoDM 4160.28-M, edition in effect as of the date of this contract. The plant clearance officer may authorize the purchaser to demilitarize, mutilate, or destroy as a condition of sale provided the property is not inherently dangerous to public health and safety.

(e) The Contractor shall dispose of classified contractor Classified Contractor inventory.

inventory in accordance with applicable security guides and regulations or as directed by the Contracting Officer.

(f) Contractor inventory dangerous to public health Inherently dangerous Contractor inventory.

or safety shall not be disposed of unless rendered innocuous or until adequate safeguards are provided.

(g) Consistent with contract terms and Contractor inventory located in foreign countries.

conditions, property disposition shall be in accordance with foreign and U.S. laws and regulations, including laws and regulations involving export controls, host nation requirements, Final Governing Standards, and Government-to-Government agreements. The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.

(h) Disposal of scrap.

(1) Contractor with scrap procedures.

(i) The Contractor shall include within its property management procedure, a process for the accountability and management of Government-owned scrap. The process shall, at a minimum, provide for the effective and efficient disposition of scrap, including sales to scrap dealers, so as to minimize costs, maximize sales proceeds, and, contain the necessary internal controls for mitigating the improper release of non-scrap property.

(ii) The Contractor may commingle Government and contractor-owned scrap and provide routine disposal of scrap, with plant clearance officer concurrence, when determined to be effective and efficient.

(2) The plant clearance officer may require the Contractor to secure from Scrap warranty.

scrap buyers a DD Form 1639, Scrap Warranty.

(i) Sale of surplus Contractor inventory.

(1) The Contractor shall conduct sales of contractor inventory (both useable property and scrap) in accordance with the requirements of this contract and plant clearance officer direction.

(2) Any sales contracts or other documents transferring title shall include the following statement:

``The Purchaser certifies that the property covered by this contract will be used in (name of country). In the event of resale or export by the Purchaser of any of the property, the Purchaser agrees to obtain the appropriate U.S. and foreign export or re-export license approval.

(j) Restrictions on purchase or retention of Contractor inventory.

(1) The Contractor may not knowingly sell the inventory to any person or that person's agent, employee, or household member if that person-

(i) Is a civilian employee of the DoD or the U.S. Coast Guard;

(ii) Is a member of the armed forces of the United States, including the U.S. Coast Guard;

or

(iii) Has any functional or supervisory responsibilities for or within the DoD's property disposal/disposition or plant clearance programs or for the disposal of contractor inventory.

(2) The Contractor may conduct Internet-based sales, to include use of a third party.

(3) If the Contractor wishes to bid on the sale, the Contractor or its employees shall submit bids to the plant clearance officer prior to soliciting bids from other prospective bidders.

(4) The Contractor shall solicit a sufficient number of bidders to obtain adequate competition. Informal bid procedures shall be used, unless the plant clearance officer directs otherwise.

The Contractor shall include in its invitation for bids, the sales terms and conditions provided by the plant clearance officer.

(5) The Contractor shall solicit bids at least 15 calendar days before bid opening to allow adequate opportunity to inspect the property and prepare bids.

(6) For large sales, the Contractor may use summary lists of items offered as bid sheets with detailed descriptions attached.

(7) In addition to mailing or delivering notice of the proposed sale to prospective bidders, the Contractor may (when the results are expected to justify the additional expense) display a notice of the proposed sale in appropriate public places, e.g., publish a sales notice on the Internet in appropriate trade journals or magazines and local newspapers.

(8) The plant clearance officer or representative will witness the bid opening. The Contractor shall submit, either electronically or manually, two copies of the bid abstract.

(9) The following terms and conditions shall be included in sales contracts involving the demilitarization, mutilation, or destruction of property:

(i) . Demilitarization, mutilation, or destruction on Contractor or subcontractor premises Item(s) require demilitarization, mutilation, or destruction by the Purchaser. Insert item number(s) ____ and specific demilitarization, mutilation, or destruction requirements for item(s) shown in Defense Demilitarization Manual, DoDM 4160.28-M, edition in effect as of the date of this contract.

Demilitarization shall be witnessed and verified by a Government representative using DRMS Form 145 or equivalent.

(ii) .Demilitarization, mutilation, or destruction off Contractor or subcontractor premises

(A) Item(s) require demilitarization, mutilation, or destruction by the ____ Purchaser. Insert item number(s) and specific demilitarization, mutilation, or destruction requirements for item(s) shown in Defense Demilitarization Manual, DoDM 4160.28-M, edition in effect as of the date of this contract. Demilitarization shall be witnessed and verified by a Government representative using DRMS Form 145 or equivalent.

(B)…