B4885 - New Pressure Washer - Kercher HDS Manual - Install Dimensions - Pg 8.pdf
PDF 90 KB Posted
- Attached to
- 355 EMS - Pressure Washer Install
- Solicitation number
- FA487725QA481
About this file
This document is a Karcher Operator's Manual installation guide for HDS pressure washer models (3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30). The technical diagram provides detailed floor mounting dimensions, piping connections, and installation specifications for the equipment. Key technical details include:
Dimensional Specifications:
- Overall unit height: 48.54"
- Width: 49.00"
- Depth: 36.68"
- Floor mounting dimensions: 21.30" height, 20.61" width
- Connections include:
- 3/4" Gas Inlet Connection
- Water In 3/4" GHF
- High Pressure Out 22mm Screw Connection
- Inlet Electrical Connection
Installation Notes:
- Recommended draft diverter placement is at least 36" above the exhaust outlet
- Includes control panel and exhaust specifications
- 10" diameter exhaust out
- Recommends checking local codes for specific installation requirements
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
9.801-509.0 - E • Karcher Operator's Manual
INSTALLATION HDS 3.5/20, 4.0/22, 3.9/30, 5.0/23, 4.8/30
98015080-3
36.00" (Recommended)
Control Panel
19.50" Dia.
Customer Supplied Draft
Diverter
24.00"
24.87"
4.00"
High Pressure Out 22mm
Screw Connection
48.54"
36.68"
24.50"
24.00"
12.00"
49.00"
Water In
3/4" GHF
21.30"
20.61"20.61"
Exhaust Out 10" Dia.
NOTE: : It is recommended to install the draft diverter at least 36" above the exhaust outlet.
Check local codes and standards for detailed installation requirements.
Piping to Outside
3.70"
Floor Mounting Dimensions
3/4" Gas Inlet
Connection
Inlet Electrical Connection
File details come from the government source that posted it. Updated .