Performance_Work_Statement_(PWS).pdf

Performance Work Statement for

Sunshades Lighting and Installation Services

1.0. Description of Services. The contractor shall provide all supplies, materials, tools, equipment, transportation, engineering, personnel, labor, supervision, and management, to provide and install sunshades LED lighting in support of the

, on Davis-Monthan AFB (DMAFB), AZ.

1.1. Scope of Work. The contractor shall furnish and install twenty-four (24) high bay lighting in a large aircraft sunshade and fifteen (15) LED high bay lights in a small aircraft sunshade, including all necessary, wire, conduit, electrical connections and mounting brackets.

Lighting shall be installed to the sunshades structures under the canopies and the lighting shall not interfere with the proper operation of any existing items, equipment, etc. All work shall be accomplished in accordance with the National Electric Code, ANSI/NFPA 70, and all other applicable laws and standards. The contractor is responsible for all code compliance and proper installation as well as making sure the electrical connection is supported by our local generator.

1.1.1. Lighting Specifications.

LED lighting: Phillips LUMILID LUXEON 3030 LED’s,OR EQUAL Operating Hour Rating: 50,000+ hour rated fixtures Light output: 39,108, Lumen UL Certified Correlated Color Temperature: 5,000K, cool white Color Rendering Index: CRI ≥ 82 Optical Pattern: Circular with Polycarbonate Lens Energy Efficiency: 125 lumens

/watt, 212 Watts, 100-277 VAC Operating temperature: -40F to 131F Total harmonic distortion: (THD) of 19.2 @ 277V full input power and 8.7 @ 120V.

IEC 61000-3-2 compliant Compliance to FCC 47 CFR part 15 non-consumer radio frequency Interference / electromagnetic interference standards.

IP 65 and NEMA 4X rated Suitable for outdoor wet conditions and have the ability to withstand at a minimum of

70 plus mph wind loads and gusts up to 110 mph.

Generator: 6KW (continuous) – 60Hertz (HZ) 110/120 VAC

1.1.2. Schedule. Upon contract award, and prior to commencing work, the contractor shall submit a schedule of each phase of the work and submit the schedule to the Contracting Officer and the point of contact. The contractor shall submit an updated schedule when changes occur. This requirement shall be completed within 75 days upon date of contract award.

1.1.3. Working Hours. The contractor shall perform LED light installation services between the hours of 7:30 a.m. and 4:30 p.m., Monday through Friday, excluding Federal Holidays.

The contractor shall coordinate with the point of contact to schedule specific days and times to perform services. If the contractor desires to work after 4:30 p.m., weekends, or during Federal Holidays, the contractor must submit the request to the point of contact. Each request will be considered on a case-by-case basis.

1.1.3.1. Restricted Areas/Government Escort. The worksite is in a restricted area and contractor personnel will require a Government escort at all times while at the worksite. The point of contact will arrange for escorts, based on the contractor’s schedule. All contractor personnel shall receive base-specific security training from the Security Manager for restricted access areas prior to being granted access to restricted areas and controlled areas.

1.1.3.2. Worksite Evacuation. There may be occasions, due to mission requirements, when contractor personnel are not allowed at the worksite or must discontinue work and vacate the worksite immediately. The point of contact will inform the contractor when they may resume work. The point of contact will make every effort to provide the contractor a forecast of time spans where access to the worksite will not be permitted.

1.1.4. Lighting Testing. Upon completion of lighting installation, the contractor shall test the lighting, in the presence of the point of contact. If any component of the lighting system does not function properly, the contractor shall make necessary adjustments/repairs at no additional cost to the Government.

1.1.5. Work Clearance and Permits. The contractor shall coordinate with the point of contact, as required, to obtain welding and/or paint spraying permits in accordance with base procedures, prior to beginning tasks. The contractor shall not commence welding or paint spraying until required permits are obtained.

1.1.6. Warranty. The contractor shall provide a 5 Year Full Performance warranty, including power supply; fixture replacement if one LED fails. The contractor shall point of contact with warranty documentation upon installation completion.

1.2. General Information

1.2.1. Contractor Project Manager. The contractor shall designate a primary on-site Project Manager (PM) who will be responsible for contractor-performed services. The PM shall be on-site at all times while contractor or subcontractor employees are at the worksite. Upon contract award, and before commencing work, the contractor shall submit the name and telephone number of the PM, in writing, to the Contracting Officer and the point of contact. The PM shall have full authority to act for the contractor on all matters relating to daily execution of the contract.

1.2.3. Contractor Qualifications. All contractor employees shall be certified and qualified to perform equipment installation. The contractor shall provide proof of employee certification/qualification within 1 day upon the Government’s request.

1.2.4. English Language. All contractor employees must be able to read, write, speak, and understand English fluently.

1.2.5. Contracting Officer Authority. The Contracting Officer is the only Government official that can make any changes to the contract. If the contractor is asked to make changes or deviate from the contract, the contractor shall not make the changes and notify the Contracting Officer immediately.

1.2.6. Contractor Travel on DMAFB. Contractor employees shall not loiter in any working area before or after performing services. All contractor employees shall limit their travel on DMAFB only to the specific areas required for performance of services or in travel directly to and from these locations. Upon completion of contract work, contractor employees shall promptly depart DMAFB.

1.2.7. Contractor Employee Conduct. The Government reserves the right to require removal from the installation any contractor employee who endangers persons or property, whose actions are inconsistent with professional conduct, whose continued employment is inconsistent with the interest of military security or who is found to be incapacitated or under the influence of alcohol, drugs, or other substances. Removal of employees for any reason does not relieve the contractor of the requirement to perform services specified herein.

1.2.8. Appearance. Employees shall present a neat appearance and be easily recognized as contractor employees by company uniforms, or name tags having the company logo affixed. All contractor employees must have in their possession at all times, Company ID badges and any Government Base access passes issued to them.

1.2.9. Safety. The contractor shall comply with all local, state and federal laws and safety regulations. Compliance with OSHA and other applicable laws and regulations for the protection of contractor employees is exclusively the obligation of the contractor, and the Government will assume no liability or responsibility for the contractor’s compliance or noncompliance with such responsibilities. The contractor is responsible for furnishing contractor employees with all necessary personal protective equipment to perform services.

1.2.9.1. Work Areas. The contractor shall, at all times, keep work areas free from accumulations of waste material, rubbish, tools, equipment, and materials. Upon completion of the job or when away from the work site, the contractor shall leave the work area and premises in a clean, neat, safe and workmanlike condition. No asbestos-containing materials may be used or installed in this work.

1.2.9.2. Trash/Waste Removal. The contractor shall remove and dispose all trash and waste materials at a permitted site. The contractor shall not dispose of any trash or waste on DMAFB.

1.2.9.3. Smoking in AF Facilities. Contractors are advised that the AF has placed restrictions on the smoking of tobacco products in AF facilities. AFI 40-102, Tobacco Use in the Air Force, outlines the procedures used by the commander to control smoking in our facilities. Contractor employees and visitors are subject to the same restrictions as Government personnel. Smoking is permitted only in designated smoking areas.

1.2.10. Illegal Substances. Illegal substance possession and/or use will not be tolerated on any military installation, including DMAFB. This includes the use, possession, distribution, or purchasing of marijuana, even if it has been medically prescribed. The contractor shall ensure that contractor employees who have base access do not possess and/or use illegal substances. All contractors and subcontractors are required to adhere to all local, state and federal laws concerning possession and/or use of illegal substances. Contractors found to be in possession of illegal substances will be barred from the installation, and subject to arrest and prosecution by local authorities.

1.2.11. Federal Holidays. The contractor is not required to provide services on the following Federal holidays (or the actual day set aside for observation).

New Year’s Day Labor Day Martin Luther King Jr’s Birthday Columbus Day Presidents Day Veterans Day Memorial Day Thanksgiving Day Independence Day Christmas Day.

1.2.12. Security Requirements

1.2.12.1. List of Employees. Upon contract award, the contractor shall submit to the Contracting Officer a list of contractor employee names, social security numbers, and driver’s license numbers, or other means of positive identification of all employees performing services on DMAFB. Foremen, supervisors, and superintendents must be identified on the list of employees. The contractor shall submit an updated list when an employee's status or information changes. The name of any contractor employee that is terminated during the period of the contract must be reported to the CO in writing within one workday of the employee’s termination.

1.2.12.2. Identification and Credentials. All on-site contractor personnel shall wear clothing appropriate to the tasks assigned and display the name of the company. Employees shall wear reflective vests at all times while operating on the flight line. The contractor shall ensure all employees have the legal right to perform work within the United States, and can pass appropriate security checks.

1.2.12.3. Safeguarding of Classified and Other Information. The contractor shall ensure that contractor employees do not notify, repeat, comment upon, disclose, or use in any way information seen, observed, or derived from documents or conversations of a sensitive or confidential nature overheard by them. The contractor shall comply with, and assume responsibility for compliance of this provision by its employees.

1.2.12.4. Pass and Identification Items. The contractor shall ensure the pass and identification items required for contract performance on DMAFB are obtained for employees and non-

Government owned vehicles.

1.2.12.5. Retrieving Identification Media. The contractor shall retrieve all identification media, including vehicle passes from employees who depart for any reason before the contract expires; e.g. terminated for cause, retirement, etc., or upon contract completion. The contractor shall notify the Contracting Officer in writing when an employee departs, and return the employee’s identification to the office that issued it.

1.2.12.6. Traffic Laws. Contractor employees shall comply with all Davis-Monthan AFB traffic regulations and state traffic laws. Contractor employees are subject to random vehicle speed control checks. Failure to adhere to base traffic regulations may result in the loss of base driving privileges, debarment from the base, or other administrative action. The use of cell phones is strictly prohibited while driving on Davis-Monthan AFB, unless the phone is hands free. Seat belt use is mandatory for all drivers and vehicle passengers.

1.2.12.7. Random Personnel and Vehicle Searches. Contractor personnel are subject to random personnel and vehicle searches. If contractor personnel refuse to be searched, they will be denied entry to the base. Denial of entry to contractor personnel who refuse to be searched, or detention of personnel found to be in possession of contraband, may result in loss of base driving privileges, debarment from the base, or other administrative action. Detention of contractor employees for any reason does not relieve the contractor of the requirement to perform contract services.

1.2.12.8. Weapons, Firearms, and Ammunition. Contractor employees are prohibited from possessing weapons, firearms, or ammunition on themselves or within their contractor owned vehicle or privately owned vehicle while on Davis-Monthan AFB.

1.2.12.9. For Official Use Only (FOUO). The contractor shall comply with DoDD 5400.07, Chapter 4, DoD Freedom of Information Act (FOIA) Program requirements. This regulation sets policy and procedures for the disclosure of records to the public and for marking, handling, transmitting, and safeguarding FOUO material. FOUO or FOIA material discovered by the contractor or contractor employees shall not be retained by the contractor and surrendered immediately to an appropriate DMAFB authority.

1.2.12.10. Reporting Requirements. Contractor employees shall immediately report to an appropriate DMAFB authority any information or circumstances of which they are aware that may pose a threat to the security of Department of Defense personnel, contractor personnel, resources, and classified or unclassified defense information.

1.2.12.11. Physical Security. Contractor employees are responsible for safeguarding all Government property and controlled forms provided for the contractor’s use. At the end of each work period, the contractor shall secure all DMAFB facilities, equipment, and materials.

1.2.12.12. Base Entry Requirements. The contractor shall obtain Government identification documents for all employees, by submitting an application to the point of contact. The contractor must provide the full name, social security account number (SSAN), driver’s license number (including state), and hours of required access, for each contractor employee. Any employee who does not have a driver’s license must provide another official form of picture ID, such as INS work permit or an Arizona ID (available through the Arizona Department of Transportation). Any employee desiring to bring a privately owned vehicle on Davis-Monthan AFB must provide proof of automobile registration and at least the minimum required liability insurance, as well as a valid driver’s license. Contractor ID cards or temporary base pass will be available for pick up within seven working days after application is received by the customer.

1.2.12.13. Contractor Vehicle Requirements. All vehicles used in the performance of the contract shall be properly registered and meet local, state, and federal safety and emissions requirements. Each contractor vehicle shall have the Contractor Logo neatly exhibited on each side of the cab. The sign must use at least 2" high letters. Vehicles shall be in satisfactory mechanical condition and present a neat and clean appearance. Any vehicle(s) not so maintained may be ordered removed from the base by and at the sole discretion of the CO, until satisfactory repairs are made. The contractor shall operate vehicles to comply with base traffic regulations.

Vehicle-mounted communication equipment shall conform to all applicable base and federal frequency regulations and avoid conflict with existing frequencies.

2.0. GOVERNMENT FURNISHED PROPERTY AND SERVICES

2.1. Utilities. A source of electricity will be available for the contractor’s use.

2.2. Emergency Services. The Government will provide security forces services (call 228- 4444, for emergencies only), and fire protection services (call 228-3333). There are no emergency medical services available on Davis-Monthan AFB, therefore the contractor must dial 911 for emergency medical services.