Update 1_Q and As posted on 21 Oct 2020.pdf
PDF 104 KB Posted
- Attached to
- Combat Arms Training and Maintenance (CATM) services Federal contract opportunity
- Solicitation number
- FA4855-21-Q-0001
About this file
This document contains a sources sought notice and draft performance work statement for combat arms training and maintenance services. The Air Force Special Operations Command is seeking information from contractors capable of providing inspection, cleaning, and maintenance services for the designated small arms firing range equipment and facilities at Cannon Air Force Base in New Mexico. The services include maintenance of the bullet trap, dust collection unit, firing point area, and range safety officer booth. The current incumbent is E.N. Range, Inc. under contract FA4855-16-A-0007. Responses from interested and capable contractors should include past performance evidence for similar work in the past five years, company information, size status, intended role and functions, and feedback on the draft requirements. The response deadline is October 19, 2020. The period of performance for the base year and four option years is from December 2020 through December 2025.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CATM Maint Services Draft PWS dated 30 Sep 2020.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CATM services at Cannon AFB, NM- Q&As
1. Are photos available? Yes, photos can be made available upon request.
2. When was the range built? The range was placed in service in 1961. The Bullet
Trap/DCU was placed in service in 2012.
3. When was it last serviced and cleaned? 5-6 August 2020
4. Indoor or outdoor range? Outdoor; mostly enclosed/covered.
5. When were the DCU filters last changed? 2018
6. What is the current DCU pressure reading? Will check when pictures are taken.
7. What are the specifications and quantities of DCU filters? 20 x Part Number
22111/22211 ordered through Air Cleaning Technologies (ACT).
8. Who is disposing of the waste? Government
9. Who is providing the waste containers? Government
10. What are the filter specifications on the air barrier system? 2 x Grainger Part Number
6B924 General Use Pleated Air Filter, 24x24x2, MERV 8, High Capacity, Synthetic, Beverage Board; 2 x Grainger Part Number 6B614 HEPA Air Filter, 24 in x 24 in x 11- 1/2 in, 99.97 %, Microglass.
11. Is on site storage available? Depends on what type of storage is being requested.
12. Typically HEPA filters are replaced yearly. Typically when do these need to be replaced? When the gauge reads 9” of water column.
13. Is the compressor oil part of this quote? Oil will be obtained IAW Para 1.2.21.
14. 4.11.1 Melrose AFB? Melrose Air Force Range (MAFR) is not included in this requirement. MAFR is only referenced because it is included in the overall Environmental guide.
15. Is this a new requirement? If not, please provide the incumbent contract number, contractor, and value. This is a follow-on contract. Currently a BPA under FA4855-16- A-0007 to E.N. Range, Inc. (CAGE: 1MQV1).
File details come from the government source that posted it. Updated .