FA4819-12-T-0063-0001.pdf

F4A3622257AK01

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to add GE model GTUP240EMWW (Brand Name or equal) to the extended description of CLIN 0001 and to change the specif ications of the w asher from 1.2CF to 2.2CF and to change the specif ications of the Dryer from 3.4CF to 4.4CF.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 15-Sep-2012

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X FA4819-12-T-0063

X 9B. DATED (SEE ITEM 11)

14-Sep-2012

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

15-Sep-2012

CODE

325 CONS/LGCCB

501 ILLINOIS AVE, STE 5

TYNDALL AFB FL 32403

FA4819 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

FA4819-12-T-0063

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from Washer machines shall be a standard model from a major washer manufacture. Shall be commercial type units and at a minimum:Washer/dryer stacked 24" modelWasher capacity of 1.5 cfDryer capacity of 3.4 cf.is 23 7/8" wide, 27 1/4" deep and 71 3/4" high.with associated hardware (water hoses, drain hose, dryer electrical connector, dryer vent hose, etc) to GE model

GTUP240EMWW (Brand Name or equal). Washer machines shall be a standard model from a major washer manufacture. Shall be commercial type units and at a minimum:Washer/dryer stacked 24" modelWasher capacity of

2.2 cfDryer capacity of 4.4 cf.with associated hardware (water hoses, drain hose, dryer electrical connector, dryer vent hose, etc).

CLIN 0002

The CLIN extended description has changed from Washer machines shall be a standard model from a major washer manufacture. Fit through a 36" doorway. Shall be commercial type units and at a minimum:14lb capacity.Top loading agitator type.Water temperature control.Water level control.Permanent press cycle.Manually operated timer.Equipped with a lid switch and tub brake.¼ hp 120V motor. White finish that matches the dryers.Dryers shall be a standard model from a major washer manufacture. Shall be commercial type units and at a minimum:14lb capacity.Permanent press cycleRegular fabric cycleAutomatically stops when door is openManually operated timerThe electric/gas dryer shall have a ¼ hp 120V motor and the electric dryers shall have a minimum input of 4,400 watts and a maximum input of 5,600 watts at 220 volts. Each shall have a white finish that matches the washers.with associated hardware (water hoses, drain hose, dryer electrical connector, dryer vent hose, etc) to

Washer machines shall be a standard model from a major washer manufacture. Fit through a 26 3/4" doorway. Shall be commercial type units and at a minimum:14lb capacity.Top loading agitator type.Water temperature control.Water level control.Permanent press cycle.Manually operated timer.Equipped with a lid switch and tub brake.¼ hp 120V motor. White finish that matches the dryers.Dryers shall be a standard model from a major washer manufacture. Shall be commercial type units and at a minimum:14lb capacity.Permanent press cycleRegular fabric cycleAutomatically stops when door is openManually operated timerThe electric/gas dryer shall have a ¼ hp 120V motor and the electric dryers shall have a minimum input of 4,400 watts and a maximum input of 5,600 watts at 220 volts. Each shall have a white finish that matches the washers.with associated hardware (water hoses, drain hose, dryer electrical connector, dryer vent hose, etc).

The following have been added by full text:

AMENDMENT NARRATIVE

Solicitation # FA4819-12-T-0063.

Ammendment 0001

Effective Date: 15 Sep 12

The purpose of this memorandum is to document that facts pertaining to the above mentioned amendment. When solicitation FA4819-12-T-0063 was created a manufacture and part number was not included in the extended description of CLIN 0001. Furthermore, the specifications for CLIN 0001 were not exactly what the customer

FA4819-12-T-0063

needed to meet his needs due to size requirements and things of that nature. This amendment was created to add the manufacture and part number for CLIN 0001 and to update the specifications. I contacted TSgt Foote from CE and he provided me with GE model GTUP240EMWW (Brand name or equal) as a manufacture and part number and also stated that the specifications used in the original solicitation would not meet his needs. He provided me with the specifications that would.

52.211-6 BRAND NAME OR EQUAL (AUG 1999)

(a) If an item in this solicitation is identified as “brand name or equal,” the purchase description reflects the characteristics and level of quality that will satisfy the Government's needs. The salient physical, functional, or performance characteristics that “equal” products must meet are specified in the solicitation.

(b) To be considered for award, offers of “equal” products, including “equal” products of the brand name manufacturer, must--

(1) Meet the salient physical, functional, or performance characteristic specified in this solicitation;

(2) Clearly identify the item by--

(i) Brand name, if any; and

(ii) Make or model number;

(3) Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and

(4) Clearly describe any modifications the offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modifications.

(c) The Contracting Officer will evaluate “equal” products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer.

(d) Unless the offeror clearly indicates in its offer that the product being offered is an “equal” product, the offeror shall provide the brand name product referenced in the solicitation.

(End of provision)

(End of Summary of Changes)