RBCP Portable Ramp Statement of Work (2).docx
DOCX document 23 KB Posted
- Attached to
- RBCP Portable Mobile Ramp
- Solicitation number
- FA480124Q0472
About this file
This document is a Statement of Work (SOW) for a portable/mobile ramp requirement. The key details are:
The ramp must meet specific dimensions, including a length of 28-32 feet, a service width of 120-140 inches, and an adjustable height between 38-56 inches. The ramp must have a weight capacity of at least 75-80k lbs, be mobile and transportable using forks, and include safety features such as rubber dock bumpers, a stowable deck bridge, sidewalls/curbs, handrails, wheel chocks, and an anti-slip surface. The ramp must adhere to all relevant safety regulations.
This SOW is for a federal contract opportunity with Solicitation Number FA480124Q0472 issued by the Department of the Air Force Air Combat Command at Holloman AFB, NM. The government is seeking to purchase 3 portable mobile loading docks/ramps per the attached requirements. Quotes must meet the specified criteria in the attachments.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RBCP Portable Ramp Requirements - Revised 8 Aug 24.docx | DOCX document | |
| RBCP Portable Ramp Requirements - Revised 7 Aug 24.docx | DOCX document | |
| Combo- Mobile Ramp - Amendment 2.docx | DOCX document | |
| RBCP Portable Mobile Ramp Q and A.pdf | ||
| Combo- Mobile Ramp - Amendment 1.docx | DOCX document | |
| Combo-RBCP Portable Mobile Ramp.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RBCP Portable/Mobile Ramp Statement of Work RBCP Portable/Mobile Ramp Proposal Introduction: This proposal outlines the detailed requirements, specifications, and delivery expectations for the RBCP Portable/Mobile Ramp. The ramp has been designed to meet the specific needs of the RBCP organization by adhering to strict dimensions, features, and safety regulations.
Dimensions:
1. Length: The ramp shall have a length of 28-32 feet to accommodate adequate load clearance from tractor trailer door height.
2. Width: The service width of the ramp shall be between 120-140 inches, which refers to the usable width between the sidewalls/curbs.
3. Height: The ramp's height shall be adjustable between 38-56 inches to accommodate different tractor trailer heights. The adjustment mechanism must be either mechanical or hydraulic, and must be powered by battery, plug, or solar.
4. Deck/Lip Length: The ramp shall have a deck/lip length of 2 feet.
Features:
1. Weight Capacity: The ramp shall have a weight capacity of a minimum of 75-80k lbs.
2. Mobility: The ramp must be mobile and transportable using forks.
3. Rubber Dock Bumpers: Rubber dock bumpers shall be installed on the ramp to protect both the ramp and commercial driver's trailers.
4. Stowable Deck Bridge: A stowable deck bridge shall be included to cover the gap between the truck and mobile ramp.
5. Self-supported: The ramp shall be self-supported and not require support from the building or truck.
Safety:
1. Sidewalls/Curbs: The ramp shall have a 12–15-inch sidewalls/curbs, running the full length of the ramp.
2. Handrails: The ramp shall include removable handrails, with a height between 30-45 inches.
3. Wheel Chocks and Vehicle Restraint Chain: The ramp shall include wheel chocks and a vehicle restraint chain to ensure safety during loading and unloading.
4. Structural Grating: The ramp's surface shall be covered with structural grating for an anti-slip surface.
5. Front Safety Support Legs: The ramp shall include front safety support legs.
6. Regulatory Compliance: The ramp must adhere to all relatable safety regulations as specified by OSHA, ANSI, IBC, etc.
Delivery:
1. Deliver to Holloman AFB and complete any necessary assembly.
File details come from the government source that posted it. Updated .