updated Statement of Work Dock 8 Fans Rev 2.pdf

DEPARTMENT OF THE AIR FORCE

HEADQUARTERS 9TH RECONNAISSANCE WING (ACC)

BEALE AIR FORCE BASE, CALIFORNIA

1 Aug 2024

MEMORANDUM FOR 9 CONS/PKB

FROM: 9 AMXS/RA

SUBJECT: Statement of Work - B11200- Dock 8 Directional Fan Install

1. PURPOSE: Install 8 Pivot 2 6ft directional fans to reduce the infiltration of birds into the hangar. The fans will be column mounted in the hangar approximately three inches below the existing duct line. The contractor shall furnish all supervision, labor, tools, equipment, materials, operations, and incidentals as required to install directional fans in Dock 8 hangars.

2. Scope of Work: The Contractor shall perform all work in accordance with the following specifications. The following scope of work shall serve as general information only and shall not limit the contractor’s responsibility or obligations to perform all task(s) within local and federal laws as well as manufacturer’s recommendations.

The Contractor shall provide a broken-out cost proposal that will reflect all labor, equipment, and materials to accomplish all the government’s requirements outlined in the

SOW

The fans will be column mounted in the hangar approximately three inches below the existing duct line. Exact placement will be determined based on the contractor’s recommendation for the best air flow and approval from 9 CES.

The contractor shall provide submittals and drawings of the fans and proposed installation locations and submit a 103 in the AF Work Management System within 7 days after award. Construction will not occur until the documents are approved by 9 CES.

Sample documents provided, for reference only.

The contractor will procure all items for the installation, to include but not limited to:

o 8 - Directional Fan Kits, Pivot 2, 6', 100-125V/1P, maximum decibel 70dB o 8 - Pivot Mount Kit, Column Mount o Protective baskets around the fans o Wall-mounted switch placed at consumer height

Electrical specifications: 9 CES has determined that there are 3 open circuits in each hangar.

o There are only two circuits available, in each hangar, for this project.

o Fan voltage needs to be 100-125V.

o Based on the Pivot 2 specifications, two fans can be connected to one circuit for a total of four fans per hangar

The contractor shall comply with all applicable Federal, State and local NEC construction standards. Current Air Force Occupational Safety and Health (AFOSH) standards and COVID-19 safety regulations also apply.

Contractor shall comply IAW all NFPA, AFI, UFC and ETL standards for fire safety.

Entry: All contractor vehicles must enter the base via the Wheatland Gate and shall be subject to inspection. All contractor personnel must obtain base passes, or be listed on the Entry Access List (EAL) throughout duration of work performance. Any persons in the EAL are required to bring two (2) forms of identification or REAL ID in order to access the base.

o All contractors will be escorted on the flightline by a member of 9 AMXS.

Contractor will practice good housekeeping during the project.

3. 9 CES will monitor and advise on the process from the SON to final acceptance testing to ensure that all code requirements are included, and all components are installed to code and manufactures specifications.

4. At the end of the installation, 9 CES and QA will inspect the installation for compliance. The testing process will include activating every fire alarm device in the facility to ensure that the fans shut down when any alarm is activated. If the installation is correct and there no code violations, the Record of Completion/Testing will be completed and filed as required by NFPA 72 and UFC.

5. Delivery Date: Contractor will have 30 calendar days upon receipt of Notice to Proceed (NTP) to complete the project.

6. Project Progress and Payment Milestones: The contractor shall be paid for the work performed after completion of all work annotated within the SOW, and after submission of an accurate invoice for the completed work once work is deemed satisfactory and all required punch-list items are fulfilled.

SAMANTHA WOLF, GS-09, DAFC

Resource Advisor, 9 AMXS

2 Attachments:

1. Sample Submittal

2. Sample HVLS Add

BEALE AFB – HVLS ADDITIONS

BLDGS. 1044, 1045, 1067, 1068

BEALE AFB, CA 95903

PROJECT No.

SBS 1128‐22

PRODUCT DATA

JANUARY 6TH 2023

FIRE ALARM

PREPARED FOR:

6131 PACIFIC ST. ROCKLIN, CA 95677 PH (530) 637‐5550 FX (530) 637‐5551 EMAIL: rikkih@sierrabuildingsystems.net

CA LIC. #783225 C7, C10, C16

DESCRIPTION MFG MFG P/N

MAAP-X FIRE ALARM PANEL MONACO N/A

MAAP (+) FIRE ALARM PANEL MONACO N/A

Addressable Rely Module MONACO 729-159-00

#16/2 FPLR, Stranded Unshielded, Mid Cap WEST PENN 990S

WIRE (wire used can be equal to Mfg. shown)

INITIATING & CONTROL DEVICES

FACP

FIRE ALARM

BLDGS. 1044, 1045, 1067, 1068 BEALE AFB, CA 95903

BEALE AFB HVLS ADDITIONS

6131 PACIFIC ST. ROCKLIN, CA 95677 PH (530) 637-5550 FX (530) 637-5551 EMAIL: rikkih@sierrabuildingsystems.net CSLB #783225 C7, C10, C16

Detect Manage

Record

729-159-00 Rev F 4/15/15

Monaco Enterprises, Inc.

P.O. Box 14129, Spokane Valley, WA 99214-0129; 14820 E. Sprague Ave., Spokane Valley, WA 99216-2149 Phone (509) 926-6277 Fax (509) 924-4980 E-mail service@monaco-inc.com Web www.monaco-inc.com

Addressable Intelligent Devices and Modules

Description NOTE For use with all Monaco Addressable Integrated Radio Transceiver and Fire Alarm Control Panel SLCs.

This relay control module has two isolated sets of Form C contacts, which operate as a DPDT switch. The module allows the control panel to switch these contacts on command. The module does not supervise the circuit connections to the relay contacts.

Relay P/N 451-700-01 is a dry contact input style relay used to interface the relay control module with sys-tems that are beyond the voltage or current rating of the relay control module. The dry contact relay derives its power from the device it is controlling. The control input is a dry contact, and the wiring is Class II power limited.

Features Two isolated sets of Form C contacts Latching output drive circuit controlled by the addressable control panel Visible LED controlled by addressable control panel to be off, blinking, or latched (“solid”) on Low standby current

Direct-dial decade address entry Stable communications technique with noise immunity Rugged industrial construction Mounts in 4-in. square, 2 1/8-in. deep junction box

Specifications

Ordering Information

Module

Associated Parts

FM

APPROVED

UL®

Operating Voltage 15 to 32 VDC

Maximum Current 6.5 mA (LED on)

Average Operating Current

300 µA, one communication LED every 5 seconds

Relay Contact Ratings

3.0A, 30 VDC resistive 0.9A, 110 VDC resistive 0.9A, 125 VAC resistive 0.5A, 125 VAC inductive (PF = 0.35) 0.7A, 75 VAC inductive (PF = 0.35)

Temperature Range 32 to 120°F (0 to 49°C)

Relative Humidity 10–93%, noncondensing

Dimensions 4.675" H x 4.275" W x 1.4" D

Part Number Description

729-159-00 Intelligent relay control module, 2 Form C contacts

Part Number Description

451-700-01 SPDT relay, 120-277 VAC, 10A contacts, LED, red enclosure

Module, Relay Control 729-159-00

Addressable Intelligent Devices and Modules

Detect Manage

Record

729-159-00 Rev F 4/15/15

Monaco Enterprises, Inc.

P.O. Box 14129, Spokane Valley, WA 99214-0129; 14820 E. Sprague Ave., Spokane Valley, WA 99216-2149 Phone (509) 926-6277 Fax (509) 924-4980 E-mail service@monaco-inc.com Web www.monaco-inc.com

Addressable Intelligent Devices and Modules

Relay Control Module

Class D Supervision

Relay Contact Condition When Energized

BLK

RED

ORG

YEL

BLU

WHT/BLU

WHT/RED

120-277 VAC

To HVAC Motor Shutdown

P/N 451-700-01 RIB Style

1/2 Nipple Mount (can mount on a 4 square box)

SLC

NO

NO

NC

Com

Com

NC

Wiring Diagrams Relay Control Module

Dry Contact Relay

CONSTRUCTION & DIMENSIONS -

CONDUCTOR PARAMETER -

• Number of Conductors 2

• AWG Size 16

• Conductor Stranding Stranded

• Conductor Type Bare Copper

• Nominal DCR 4.1 Ohm/1000ft

• Cabling Lay Length 2.75 in

• Twists/Foot 4.4 twist/ft

INSULATION PARAMETER -

• Insulation Type Polypropylene - PP

• Insulation Thickness 0.008 in

• Insulation Color Code 1. Black 2.Red

SHIELDING PARAMETER -

• Shield Type None

ELECTRICAL CHARACTERISTICS -

• Nom. Cap. Between Conductors 23 pF/ft

OVERALL CONSTRUCTION PARAMETERS -

Jacket Type PVC

Jacket Thickness 0.022 in

Nominal Cable O.D. 0.168 in

Plenum No

NEC UL Rating FPLR

RoHS Compliant Yes

Pull Tension 62 lbs

Bend Radius 1.512 in

Cable Weight 25 lbs

OVERALL ELECTRICAL/OPTICAL CHARACTERISTICS -

UL Flammability UL1666 Vertical Shaft

Operating Range -20 to 60 Deg C

UL Voltage Rating 300

Construction & Dimensions

Overall Construction

Overall Electrical & Optical Characteristics

Detailed Specification & Technical Data

990S

Fire Alarm Signaling

2833 West Chestnut Street | Washington, PA 15301 | Toll Free: 800-245-4964 | www.westpenn-wpw.com

16/2 Stranded Unshielded FPLR

RELATED PRODUCTS -

Plenum Number 60991BS

Aquaseal Number AQC225

Aquaseal Direct Burial Number AQ225

Related Products

Detailed Specification & Technical Data

2833 West Chestnut Street | Washington, PA 15301 | Toll Free: 800-245-4964 | www.westpenn-wpw.com

990S

Fire Alarm Signaling 16/2 Stranded Unshielded FPLR

This drawing contains information which is the proprietary property of Sierra Building

Systems, Inc. Any unauthorized use, reuse or duplication of this drawing and/or any information contained herein, without the expressed written consent of Sierra Building Systems, Inc. is prohibited.

B

EA

LE

A

FB

H

VL

S

A D

D

IT

IO

N

S

BE

AL

E

AI

R

F O

R C

E

BA

SE

PROJECT TITLE

REV

NICET

CERTIFIED

DAVE FRECHETTE

FIRE ALARM SYSTEMS

LEVEL IV # 93773

UL CERTIFED PROTECTIVE

SIGNALING SERVICES #S24503

R

UL

DESCRIPTION DATE

SHEET TITLE

CHECKED BY

DRAWN BY

PROJECT NO.

DATE

J.M.

S.E.

1128-22

12/07/22

SHEET NO.

JO

B

ST

AT

U S:

R w w w .s ie rr ab ui ld in gs ys te m s.

ne t

PH

: 5

-6

-5

FX

: 5

-6

-5

C

A L

IC

:7

C

7, C

, C

SI

ER

RA

B

U

IL

D

IN

G S

YS

TE

M S, IN

C.

P A

C

IF

IC

S

TR

EE

T, R

O C

K

LI

N , C

A

BEALE AFB HVLS ADDTIONS

BEALE AIRE FORCE BASE

FA0.1

EQUIPMENT SCHEDULE

CONSTRUCTION TYPE: N/A

OCCUPANCY TYPE: N/A

OCCUPANT LOAD: N/A

AUTOMATIC SPRINKLER SYSTEM: YES

STORIES: 1

HEIGHT: 38'-6"

TOTAL: 22,118 SQ FT

ADDING INTERFACE FOR HVLS FAN SHUTDOWN IN BUILDINGS 1044, 1045, 1067, & 1068. BUILDINGS 1044 AND 1068 WILL USE SPARE ON BOARD RELAYS ON THE MAAP-X PANELS. BUILDINGS 1045, & 1067 WILL

HAVE ADDRESSABLE RELAYS PROVIDED / INSTALLED FOR INTERFACE.

SHEET DESCRIPTION

FA0.1 EQUIPMENT SCHEDULE, MATRIX, & NOTES

FA0.2 NOTES & DETAILS

FA1.0 LOCATION MAPS

FA1.1 FLOOR PLANS & DETAILS

SHEET INDEX

SCOPE OF WORK

PROJECT INFORMATION

FIRE ALARM SYSTEM

CODE

EQUIP SCHEDULE &

NOTES

FA0.1

WORK SHALL BE PERFORMED IN ACCORDANCE WITH THE APPLICABLE REGULATIONS,

INCLUDING BUT NOT LIMITED TO THE FOLLOWING:

STATE CALIFORNIA CODE OF REGULATIONS (CCR) 2019 TITLE 24 CALIFORNIA BUILDING CODE

PART 2, 2019 CALIFORNIA BUILDING CODE (CBC), 2018 IBC.

PART 3, 2019 CALIFORNIA ELECTRICAL CODE (CEC), 2017 NEC.

PART 9, 2019 CALIFORNIA FIRE CODE (CFC) BASED 0N 2018 IFC.

2016 NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) 72 WITH CA AMENDMENTS.

FA0.1

FIRE ALARM SYSTEMS MATRIX

Systems, Inc. Any unauthorized use, reuse or duplication of this drawing and/or any information contained herein, without the expressed written consent of Sierra Building Systems, Inc. is prohibited.

B

EA

LE

A

FB

H

VL

S

A D

D

IT

IO

N

S

BE

AL

E

AI

R

F O

R C

E

BA

SE

PROJECT TITLE

REV

NICET

CERTIFIED

DAVE FRECHETTE

FIRE ALARM SYSTEMS

LEVEL IV # 93773

UL CERTIFED PROTECTIVE

SIGNALING SERVICES #S24503

R

UL

DESCRIPTION DATE

SHEET TITLE

CHECKED BY

DRAWN BY

PROJECT NO.

DATE

J.M.

S.E.

1128-22

12/07/22

SHEET NO.

JO

B

ST

AT

U S:

R w w w .s ie rr ab ui ld in gs ys te m s.

ne t

PH

: 5

-6

-5

FX

: 5

-6

-5

C

A L

IC

:7

C

7, C

, C

SI

ER

RA

B

U

IL

D

IN

G S

YS

TE

M S, IN

C.

P A

C

IF

IC

S

TR

EE

T, R

O C

K

LI

N , C

A

NOTES & DETAIL

FA0.2

FIRELITE

PULL DOWN

PUSH IN

FIRE

NUMBERED SHEET NOTES#

FIRE ALARM GENERAL NOTES

FIRE ALARM SYSTEM MONITORING NOTE

FA0.2

TYPICAL FIRE ALARM DEVICE INSTALLATION REQUIREMENTS

SCALE: NOT TO SCALE

ABBREVIATIONS

Systems, Inc. Any unauthorized use, reuse or duplication of this drawing and/or any information contained herein, without the expressed written consent of Sierra Building Systems, Inc. is prohibited.

B

EA

LE

A

FB

H

VL

S

A D

D

IT

IO

N

S

BE

AL

E

AI

R

F O

R C

E

BA

SE

PROJECT TITLE

REV

NICET

CERTIFIED

DAVE FRECHETTE

FIRE ALARM SYSTEMS

LEVEL IV # 93773

UL CERTIFED PROTECTIVE

SIGNALING SERVICES #S24503

R

UL

DESCRIPTION DATE

SHEET TITLE

CHECKED BY

DRAWN BY

PROJECT NO.

DATE

J.M.

S.E.

1128-22

12/07/22

SHEET NO.

JO

B

ST

AT

U S:

R w w w .s ie rr ab ui ld in gs ys te m s.

ne t

PH

: 5

-6

-5

FX

: 5

-6

-5

C

A L

IC

:7

C

7, C

, C

SI

ER

RA

B

U

IL

D

IN

G S

YS

TE

M S, IN

C.

P A

C

IF

IC

S

TR

EE

T, R

O C

K

LI

N , C

A

FA1.0

OVERALL SITE MAP

SCALE: NTS

LOCATION MAPS

FA1.0

FA1.0

FA1.0

FA1.0

A

A

RELAY CONTROL MODULE

Com

NC

NO

NC

Com

NO

SLC

Terminals 4 & 13A for Shutdown Relay

AUTO FWD

M R F

STOP

U/T1 V/T2 W/T3

L1

L2

L3 An alarm condition will stop the fan and issue an “F_EF” (External Fault) on the fan controller’s display.

REV RUN

White (-)

Relay Coil/Contact Details

COM Blue

Red (+) NC Yellow NO Orange

Coil: 20–32 VDC @ 20 mA

T1 T2

T4 T5

T3

T11 T10 T9

T8 T7 T6

TENS ONES

LOOP

ADDRESS

FROM MAIN

FACP

OUT TO

NEXT SLC

DEVICE

2 5 6 25 4 1113A13B13C14 301617

PE

L1 L2

O R

AN

G

E (N

O

BL

U

E (C

O M

729-159-00

H

VL

S

VF

D

MAAP-X FORM C RELAYS

FOUR (4) RATED AT 30 VDC 2A

Terminals 4 & 13A for Shutdown Relay

AUTO FWD

M R F

STOP

U/T1 V/T2 W/T3

L1

L2

L3 An alarm condition will stop the fan and issue an “F_EF” (External Fault) on the fan controller’s display.

REV RUN2 5 6 25 4 1113A13B13C14301617

PE

L1 L2

O R

AN

G

E (N

O

BL

U

E (C

O M

H

VL

S

VF

D

This drawing contains information which is the proprietary property of Sierra Building

Systems, Inc. Any unauthorized use, reuse or duplication of this drawing and/or any information contained herein, without the expressed written consent of Sierra Building Systems, Inc. is prohibited.

B

EA

LE

A

FB

H

VL

S

A D

D

IT

IO

N

S

BE

AL

E

AI

R

F O

R C

E

BA

SE

PROJECT TITLE

REV

NICET

CERTIFIED

DAVE FRECHETTE

FIRE ALARM SYSTEMS

LEVEL IV # 93773

UL CERTIFED PROTECTIVE

SIGNALING SERVICES #S24503

R

UL

DESCRIPTION DATE

SHEET TITLE

CHECKED BY

DRAWN BY

PROJECT NO.

DATE

J.M.

S.E.

1128-22

12/07/22

SHEET NO.

JO

B

ST

AT

U S:

R w w w .s ie rr ab ui ld in gs ys te m s.

ne t

PH

: 5

-6

-5

FX

: 5

-6

-5

C

A L

IC

:7

C

7, C

, C

SI

ER

RA

B

U

IL

D

IN

G S

YS

TE

M S, IN

C.

P A

C

IF

IC

S

TR

EE

T, R

O C

K

LI

N , C

A

FA1.1

BUILDINGS 1044, 1045, 1067, & 1068 - FLOOR PLAN

SCALE: 3/32" = 1'-0"

FLOOR PLAN & DETAILS

FA1.1

FA1.1

FAN VFD / RELAY MODULE WIRING DIAGRAM

SCALE: NTS

NUMBERED NOTES

SHEET NOTES

FA1.1

FAN VFD / MAAP-X RELAY WIRING DIAGRAM

SCALE: NTS