Solicitation.doc

Section SF 1449 - CONTINUATION SHEET

MAINTENANCE FOR TWO V47 WIND TURBINES

FFP

NONPERSONEL SERVICES TO PROVIDE ALL LABOR, TOOLS, PARTS, MATERIAL, AND TRANSPORTATION NECESSARY TO PERFORM MAINTENANCE AND SERVICE AS NEEDED ON TWO V47 POWER GENERATING TURBINES INACCORDANCE WITH THE PERFORMANCE WORK STATEMENT.

FOB: Destination

PURCHASE REQUEST NUMBER: F1Y3DA8078A002

SIGNAL CODE: A

NET AMT

FFP

MATERIAL, AND TRANSPORTATION NECESSARY TO PERFORM MAINTENANCE AND SERVICE AS NEEDED ON TWO V47 POWER GENERATING TURBINES INACCORDANCE WITH THE PERFORMANCE WORK STATEMENT.

FOB: Destination

SIGNAL CODE: A

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

300 VESLE DRIVE

BLDG. 320

F.E. WARREN AFB WY 82005

(307)773-3743

F1Y3DA

F1Y3DA

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEC 2007) (DEVIATION)

(a) Comptroller General Examination of Record. The Contractor agrees to comply with the provisions of this paragraph (a) if the contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to the right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times, the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(b) Notwithstanding the requirements of any other clause in this contract, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (i) through (vii) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.219-8, Utilization of Small Business Concerns (MAY 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $500,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(ii) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(iii) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212).

(iv) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793).

(v) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (DEC 2004) (E.O. 13201)

(vi) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.).

(vii) 52.222-50, Combating Trafficking in Persons (AUG 2007) (22 U.S.C. 7104(g)). Flow down required in accordance with paragraph (f) of FAR clause 52.222-50.

(viii) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b) (Unless exempt pursuant to 23.204, applies to contracts when energy-consuming products listed in the ENERGY STAR Program or Federal Energy Management Program (FEMP) will be--

(A) Delivered;

(B) Acquired by the Contractor for use in performing services at a Federally-controlled facility;

(C) Furnished by the Contractor for use by the Government; or

(D) Specified in the design of a building or work, or incorporated during its construction, renovation, or maintenance.)

(ix) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(x) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Nov 2007) (41 U.S.C. 351, et seq.).

(xii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(c) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.222-42 STATEMENT OF EQUIVALENT RATES FOR FEDERAL HIRES (MAY 1989)

In compliance with the Service Contract Act of 1965, as amended, and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332.

THIS STATEMENT IS FOR INFORMATION ONLY: IT IS NOT A WAGE DETERMINATION

Employee Class Monetary Wage-Fringe Benefits

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/vffar1.htm

OR FOR FAR ONLY PROVISIONS/CLAUSES

http://www.arnet.gov/far/

OR FOR DFARS ONLY PROVISIONS/CLAUSES

http://www.acq.osd.mil/dpap/dars/dfars/index.htm

(End of clause)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DFARS clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (APR2007) (DEVIATION)

(a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5 (MAR 2007) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract:

(End of clause)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (MAR 2007)

(a) Definitions. As used in this clause--

(1) Contract financing payment and invoice payment have the meanings given in section 32.001 of the Federal Acquisition Regulation.

(2) Electronic form means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using one of the electronic forms provided for in paragraph (b) of this clause.

(3) Payment request means any request for contract financing payment or invoice payment submitted by the Contractor under this contract.

(b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests using one of the following electronic forms:

(1) Wide Area WorkFlow-Receipt and Acceptance (WAWF-RA). Information regarding WAWF-RA is available on the Internet at https://wawf.eb.mil.

(2) Web Invoicing System (WInS). Information regarding WInS is available on the Internet at https://ecweb.dfas.mil.

(3) American National Standards Institute (ANSI) X.12 electronic data interchange (EDI) formats.

(i) Information regarding EDI formats is available on the Internet at http://www.X12.org.

(ii) EDI implementation guides are available on the Internet at http:// www.dod.mil/dfas/contractorpay/electroniccommerce.html.

(4) Another electronic form authorized by the Contracting Officer.

(c) The Contractor may submit a payment request in non-electronic form only when--

(1) DoD is unable to receive a payment request in electronic form; or

(2) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer's determination with each request for payment.

(d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract.

(e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payments requests.

(End of clause)

5352.201-9101 OMBUDSMAN (AUG 2005)

(a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern.

(b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions).

(c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, HQ AFSPC/A7K, 150 VandenbergStreet, Suite1105, Peterson AFB, CO 80914-4350, Phone: 719-554-5250, Fax: 719-554-5299. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067.

(d) The ombudsman has no authority to render a decision that binds the agency.

(e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer.

(End of clause)

5352.242-9000 CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (JUN 2002)

(a) The contractor shall obtain base identification and vehicle passes for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation.

(b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or security police for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver’s license, current vehicle registration, and valid vehicle insurance certificate to obtain a vehicle pass.

(c) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site.

(d) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1, The Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management, as applicable.

(e) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office.

(f) Failure to comply with these requirements may result in withholding of final payment.

WAGE DETERMINATION SCA

WD 05-2587 (Rev.-3) was first posted on www.wdol.gov on 09/25/2007

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2587

William W.Gross Division of | Revision No.: 3

Director Wage Determinations| Date Of Revision: 09/17/2007

States: Nebraska, Wyoming

Area: Nebraska Counties of Banner, Box Butte, Cheyenne, Dawes, Deuel, Garden, Kimball, Morrill, Scotts Bluff, Sheridan, Sioux

Wyoming Statewide

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE MINIMUM WAGE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 12.16

01012 - Accounting Clerk II 14.87

01013 - Accounting Clerk III 15.29

01020 - Administrative Assistant 15.99

01040 - Court Reporter 13.20

01051 - Data Entry Operator I 9.80

01052 - Data Entry Operator II 10.69

01060 - Dispatcher, Motor Vehicle 17.29

01070 - Document Preparation Clerk 10.81

01090 - Duplicating Machine Operator 10.81

01111 - General Clerk I 9.97

01112 - General Clerk II 11.28

01113 - General Clerk III 12.24

01120 - Housing Referral Assistant 13.72

01141 - Messenger Courier 9.92

01191 - Order Clerk I 10.72

01192 - Order Clerk II 11.70

01261 - Personnel Assistant (Employment) I 12.81

01262 - Personnel Assistant (Employment) II 14.33

01263 - Personnel Assistant (Employment) III 15.98

01270 - Production Control Clerk 16.79

01280 - Receptionist 9.94

01290 - Rental Clerk 9.62

01300 - Scheduler, Maintenance 11.00

01311 - Secretary I 11.00

01312 - Secretary II 12.31

01313 - Secretary III 13.72

01320 - Service Order Dispatcher 17.29

01410 - Supply Technician 15.99

01420 - Survey Worker 10.82

01531 - Travel Clerk I 10.59

01532 - Travel Clerk II 11.23

01533 - Travel Clerk III 11.83

01611 - Word Processor I 10.39

01612 - Word Processor II 12.18

01613 - Word Processor III 13.61

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer, Fiberglass 19.52

05010 - Automotive Electrician 18.55

05040 - Automotive Glass Installer 17.56

05070 - Automotive Worker 17.56

05110 - Mobile Equipment Servicer 15.62

05130 - Motor Equipment Metal Mechanic 19.52

05160 - Motor Equipment Metal Worker 17.56

05190 - Motor Vehicle Mechanic 19.52

05220 - Motor Vehicle Mechanic Helper 14.65

05250 - Motor Vehicle Upholstery Worker 16.59

05280 - Motor Vehicle Wrecker 17.56

05310 - Painter, Automotive 18.55

05340 - Radiator Repair Specialist 17.56

05370 - Tire Repairer 15.09

05400 - Transmission Repair Specialist 19.52

07000 - Food Preparation And Service Occupations

07010 - Baker 10.46

07041 - Cook I 8.79

07042 - Cook II 10.22

07070 - Dishwasher 7.62

07130 - Food Service Worker 8.34

07210 - Meat Cutter 12.76

07260 - Waiter/Waitress 7.97

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 18.55

09040 - Furniture Handler 13.47

09080 - Furniture Refinisher 18.55

09090 - Furniture Refinisher Helper 14.65

09110 - Furniture Repairer, Minor 16.59

09130 - Upholsterer 18.55

11000 - General Services And Support Occupations

11030 - Cleaner, Vehicles 8.59

11060 - Elevator Operator 8.25

11090 - Gardener 11.26

11122 - Housekeeping Aide 8.25

11150 - Janitor 10.24

11210 - Laborer, Grounds Maintenance 10.64

11240 - Maid or Houseman 7.97

11260 - Pruner 12.43

11270 - Tractor Operator 12.29

11330 - Trail Maintenance Worker 10.64

11360 - Window Cleaner 11.89

12000 - Health Occupations

12010 - Ambulance Driver 10.93

12011 - Breath Alcohol Technician 14.57

12012 - Certified Occupational Therapist Assistant 15.86

12015 - Certified Physical Therapist Assistant 17.10

12020 - Dental Assistant 12.16

12025 - Dental Hygienist 25.55

12030 - EKG Technician 21.51

12035 - Electroneurodiagnostic Technologist 21.51

12040 - Emergency Medical Technician 12.02

12071 - Licensed Practical Nurse I 13.03

12072 - Licensed Practical Nurse II 14.57

12073 - Licensed Practical Nurse III 16.25

12100 - Medical Assistant 10.83

12130 - Medical Laboratory Technician 14.39

12160 - Medical Record Clerk 11.83

12190 - Medical Record Technician 13.78

12195 - Medical Transcriptionist 11.48

12210 - Nuclear Medicine Technologist 31.24

12221 - Nursing Assistant I 9.53

12222 - Nursing Assistant II 10.71

12223 - Nursing Assistant III 11.69

12224 - Nursing Assistant IV 13.12

12235 - Optical Dispenser 12.28

12236 - Optical Technician 12.70

12250 - Pharmacy Technician 13.47

12280 - Phlebotomist 13.03

12305 - Radiologic Technologist 20.97

12311 - Registered Nurse I 19.29

12312 - Registered Nurse II 23.54

12313 - Registered Nurse II, Specialist 23.54

12314 - Registered Nurse III 28.54

12315 - Registered Nurse III, Anesthetist 28.54

12316 - Registered Nurse IV 32.26

12317 - Scheduler (Drug and Alcohol Testing) 18.05

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 14.53

13012 - Exhibits Specialist II 18.00

13013 - Exhibits Specialist III 22.14

13041 - Illustrator I 13.41

13042 - Illustrator II 16.20

13043 - Illustrator III 21.48

13047 - Librarian 19.71

13050 - Library Aide/Clerk 9.68

13054 - Library Information Technology Systems Administrator 18.82

13058 - Library Technician 11.26

13061 - Media Specialist I 12.30

13062 - Media Specialist II 12.50

13063 - Media Specialist III 13.94

13071 - Photographer I 12.38

13072 - Photographer II 14.71

13073 - Photographer III 18.22

13074 - Photographer IV 22.28

13075 - Photographer V 26.96

13110 - Video Teleconference Technician 15.02

14000 - Information Technology Occupations

14041 - Computer Operator I 11.84

14042 - Computer Operator II 13.22

14043 - Computer Operator III 14.97

14044 - Computer Operator IV 17.15

14045 - Computer Operator V 18.15

14071 - Computer Programmer I (1) 15.66

14072 - Computer Programmer II (1) 19.48

14073 - Computer Programmer III (1) 23.18

14074 - Computer Programmer IV (1) 24.85

14101 - Computer Systems Analyst I (1) 23.60

14102 - Computer Systems Analyst II (1) 27.37

14103 - Computer Systems Analyst III (1) 27.62

14150 - Peripheral Equipment Operator 11.84

14160 - Personal Computer Support Technician 21.37

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 21.75

15020 - Aircrew Training Devices Instructor (Rated) 22.83

15030 - Air Crew Training Devices Instructor (Pilot) 26.32

15050 - Computer Based Training Specialist / Instructor 22.09

15060 - Educational Technologist 24.34

15070 - Flight Instructor (Pilot) 26.32

15080 - Graphic Artist 14.14

15090 - Technical Instructor 16.93

15095 - Technical Instructor/Course Developer 20.71

15110 - Test Proctor 13.74

15120 - Tutor 13.74

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations

16010 - Assembler 7.97

16030 - Counter Attendant 8.68

16040 - Dry Cleaner 10.08

16070 - Finisher, Flatwork, Machine 7.97

16090 - Presser, Hand 7.97

16110 - Presser, Machine, Drycleaning 7.97

16130 - Presser, Machine, Shirts 7.97

16160 - Presser, Machine, Wearing Apparel, Laundry 7.97

16190 - Sewing Machine Operator 10.74

16220 - Tailor 11.32

16250 - Washer, Machine 8.68

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 20.39

19040 - Tool And Die Maker 24.99

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 17.23

21030 - Material Coordinator 17.13

21040 - Material Expediter 17.13

21050 - Material Handling Laborer 10.90

21071 - Order Filler 11.08

21080 - Production Line Worker (Food Processing) 16.12

21110 - Shipping Packer 12.93

21130 - Shipping/Receiving Clerk 12.93

21140 - Store Worker I 11.00

21150 - Stock Clerk 13.99

21210 - Tools And Parts Attendant 17.23

21410 - Warehouse Specialist 17.23

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 21.93

23021 - Aircraft Mechanic I 20.89

23022 - Aircraft Mechanic II 21.93

23023 - Aircraft Mechanic III 23.03

23040 - Aircraft Mechanic Helper 15.68

23050 - Aircraft, Painter 19.85

23060 - Aircraft Servicer 17.75

23080 - Aircraft Worker 18.79

23110 - Appliance Mechanic 18.55

23120 - Bicycle Repairer 15.09

23125 - Cable Splicer 23.25

23130 - Carpenter, Maintenance 18.55

23140 - Carpet Layer 19.32

23160 - Electrician, Maintenance 21.43

23181 - Electronics Technician Maintenance I 21.05

23182 - Electronics Technician Maintenance II 22.31

23183 - Electronics Technician Maintenance III 23.39

23260 - Fabric Worker 17.04

23290 - Fire Alarm System Mechanic 20.74

23310 - Fire Extinguisher Repairer 15.83

23311 - Fuel Distribution System Mechanic 21.68

23312 - Fuel Distribution System Operator 16.83

23370 - General Maintenance Worker 18.95

23380 - Ground Support Equipment Mechanic 20.89

23381 - Ground Support Equipment Servicer 17.75

23382 - Ground Support Equipment Worker 18.79

23391 - Gunsmith I 14.17

23392 - Gunsmith II 16.33

23393 - Gunsmith III 18.54

23410 - Heating, Ventilation And Air-Conditioning Mechanic 19.52

23411 - Heating, Ventilation And Air Contditioning Mechanic (Research Facility)

20.99

23430 - Heavy Equipment Mechanic 21.14

23440 - Heavy Equipment Operator 19.52

23460 - Instrument Mechanic 24.49

23465 - Laboratory/Shelter Mechanic 19.18

23470 - Laborer 10.90

23510 - Locksmith 19.47

23530 - Machinery Maintenance Mechanic 23.04

23550 - Machinist, Maintenance 19.51

23580 - Maintenance Trades Helper 14.65

23591 - Metrology Technician I 22.26

23592 - Metrology Technician II 27.12

23593 - Metrology Technician III 28.61

23640 - Millwright 22.75

23710 - Office Appliance Repairer 18.55

23760 - Painter, Maintenance 18.55

23790 - Pipefitter, Maintenance 21.73

23810 - Plumber, Maintenance 21.73

23820 - Pneudraulic Systems Mechanic 20.74

23850 - Rigger 20.74

23870 - Scale Mechanic 18.23

23890 - Sheet-Metal Worker, Maintenance 19.52

23910 - Small Engine Mechanic 17.56

23931 - Telecommunications Mechanic I 24.75

23932 - Telecommunications Mechanic II 25.97

23950 - Telephone Lineman 21.47

23960 - Welder, Combination, Maintenance 19.52

23965 - Well Driller 19.52

23970 - Woodcraft Worker 20.74

23980 - Woodworker 15.62

24000 - Personal Needs Occupations

24570 - Child Care Attendant 8.32

24580 - Child Care Center Clerk 10.40

24610 - Chore Aide 9.35

24620 - Family Readiness And Support Services Coordinator 10.77

24630 - Homemaker 11.59

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 25.40

25040 - Sewage Plant Operator 19.35

25070 - Stationary Engineer 25.40

25190 - Ventilation Equipment Tender 16.12

25210 - Water Treatment Plant Operator 19.35

27000 - Protective Service Occupations

27004 - Alarm Monitor 14.25

27007 - Baggage Inspector 10.85

27008 - Corrections Officer 16.03

27010 - Court Security Officer 19.99

27030 - Detection Dog Handler 12.76

27040 - Detention Officer 17.31

27070 - Firefighter 17.94

27101 - Guard I 10.85

27102 - Guard II 14.04

27131 - Police Officer I 19.56

27132 - Police Officer II 21.73

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 9.81

28042 - Carnival Equipment Repairer 10.41

28043 - Carnival Equpment Worker 8.48

28210 - Gate Attendant/Gate Tender 12.36

28310 - Lifeguard 11.01

28350 - Park Attendant (Aide) 13.83

28510 - Recreation Aide/Health Facility Attendant 10.09

28515 - Recreation Specialist 11.59

28630 - Sports Official 11.01

28690 - Swimming Pool Operator 13.90

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 18.70

29020 - Hatch Tender 18.70

29030 - Line Handler 18.70

29041 - Stevedore I 17.52

29042 - Stevedore II 22.41

30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (2) 32.97

30011 - Air Traffic Control Specialist, Station (HFO) (2) 22.73

30012 - Air Traffic Control Specialist, Terminal (HFO) (2) 25.03

30021 - Archeological Technician I 13.71

30022 - Archeological Technician II 15.28

30023 - Archeological Technician III 19.00

30030 - Cartographic Technician 18.15

30040 - Civil Engineering Technician 17.94

30061 - Drafter/CAD Operator I 13.71

30062 - Drafter/CAD Operator II 15.34

30063 - Drafter/CAD Operator III 17.10

30064 - Drafter/CAD Operator IV 20.48

30081 - Engineering Technician I 12.69

30082 - Engineering Technician II 16.34

30083 - Engineering Technician III 17.54

30084 - Engineering Technician IV 19.75

30085 - Engineering Technician V 24.15

30086 - Engineering Technician VI 26.30

30090 - Environmental Technician 15.86

30210 - Laboratory Technician 16.76

30240 - Mathematical Technician 15.44

30361 - Paralegal/Legal Assistant I 14.37

30362 - Paralegal/Legal Assistant II 16.79

30363 - Paralegal/Legal Assistant III 20.48

30364 - Paralegal/Legal Assistant IV 24.86

30390 - Photo-Optics Technician 17.74

30461 - Technical Writer I 16.53

30462 - Technical Writer II 20.22

30463 - Technical Writer III 26.92

30491 - Unexploded Ordnance (UXO) Technician I 20.95

30492 - Unexploded Ordnance (UXO) Technician II 25.35

30493 - Unexploded Ordnance (UXO) Technician III 30.39

30494 - Unexploded (UXO) Safety Escort 20.95

30495 - Unexploded (UXO) Sweep Personnel 20.95

30620 - Weather Observer, Combined Upper Air Or Surface Programs (2) 15.34

30621 - Weather Observer, Senior (2) 18.51

31000 - Transportation/Mobile Equipment Operation Occupations

31020 - Bus Aide 9.08

31030 - Bus Driver 14.37

31043 - Driver Courier 12.85

31260 - Parking and Lot Attendant 8.53

31290 - Shuttle Bus Driver 13.62

31310 - Taxi Driver 10.89

31361 - Truckdriver, Light 12.85

31362 - Truckdriver, Medium 14.58

31363 - Truckdriver, Heavy 17.12

31364 - Truckdriver, Tractor-Trailer 17.12

99000 - Miscellaneous Occupations

99030 - Cashier 8.09

99050 - Desk Clerk 8.78

99095 - Embalmer 24.22

99251 - Laboratory Animal Caretaker I 9.03

99252 - Laboratory Animal Caretaker II 9.78

99310 - Mortician 24.22

99410 - Pest Controller 13.07

99510 - Photofinishing Worker 10.33

99710 - Recycling Laborer 12.97

99711 - Recycling Specialist 16.98

99730 - Refuse Collector 12.83

99810 - Sales Clerk 10.53

99820 - School Crossing Guard 12.05

99830 - Survey Party Chief 15.02

99831 - Surveying Aide 10.97

99832 - Surveying Technician 13.63

99840 - Vending Machine Attendant 9.51

99841 - Vending Machine Repairer 12.03

99842 - Vending Machine Repairer Helper 10.17

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $3.16 per hour or $126.40 per week or $547.73 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther

King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE PARENTHESES AFTER THEM RECEIVE THE FOLLOWING BENEFITS (as numbered):

1) Does not apply to employees employed in a bona fide executive, administrative, or professional capacity as defined and delineated in 29 CFR 541. (See CFR 4.156)

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** NOTES APPLYING TO THIS WAGE DETERMINATION **

Under the policy and guidance contained in All Agency Memorandum No. 159, the Wage and Hour Division does not recognize, for section 4(c) purposes, prospective wage rates and fringe benefit provisions that are effective only upon such contingencies as "approval of Wage and Hour, issuance of a wage determination, incorporation of the wage determination in the contract, adjusting the contract price, etc." (The relevant CBA section) in the collective bargaining agreement between (the parties) contains contingency language that Wage and Hour does not recognize as reflecting

"arm's length negotiation" under section 4(c) of the Act and 29 C.F.R. 5.11(a) of the regulations. This wage determination therefore reflects the actual CBA wage rates and fringe benefits paid under the predecessor contract.

The duties of employees under job titles listed are those described in the

"Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol.gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/.

REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form

1444 (SF 1444)}

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)}

When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation) and computes a proposed rate).

2) After contract award, the contractor prepares a written report listing in order proposed classification title), a Federal grade equivalency (FGE) for each proposed classification), job description), and rationale for proposed wage rate), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour decision to the contractor.

6) The contractor informs the affected employees.

Information required by the Regulations must be submitted on SF 1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of

Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.

PERFORMANCE WORK STATEMENT

26-Mar-08

PERFORMANCE WORK STATEMENT

FOR

MAINTENANCE OF V47 POWER GENERATING WIND

TURBINES AT F.E. WARREN AFB

SECTION 1: GENERAL

1.1 Scope: The work to be performed under these specifications consists of furnishing all parts, material, supplies, equipment, labor and transportation necessary for scheduled periodic maintenance, unscheduled maintenance, diagnostics, limited repair and parts replacement for two Vestas V47 660 kilowatt wind turbine generators (WTG’s) at F. E. Warren Air Force Base, Wyoming. The Vestas V47 turbines are located atop 50 meter (164’) high tubular towers. Access to the turbine nacelle is accomplished using a ladder with appropriate fall protection equipment inside the tower.

1.2 Background and Assumptions: The two Vestas V47 turbines at F. E. Warren AFB have been in operation since July (WTG 1) and August (WTG 2) of 2006. The warranty period expired in February of 2007. Maintenance and repair since then has been conducted using purchases orders. It is assumed that since the wind turbine generators have been in operation since August 2006 that there are no parts considered defective in design, manufacturing, materials, workmanship or damage excluding ordinary wear and tear of the turbine equipment or parts. For contract pricing purposes the Contractor shall assume the extent of wear and tear is typical for Vestas V47 WTG’s operating under nominal conditions with appropriate scheduled maintenance.

1.3 Base Identification Card: The Contractor shall coordinate with the Government for personnel and equipment access to the base. Pass and Identification (ID) application process and instruction will be provided by the Contracting Officer at award of the contract. It will require the contractor to submit a letter and obtain a picture ID for each employee.

1.4 Safety: All regulations pertaining to fall protection and safety when working with energized and de-energized electric distribution lines and equipment as noted in NFPA 70E shall be strictly adhered to by the contractor. Necessary personal protective equipment (PPE) required to safely perform tasks shall be used at all time. Particular care shall be exercised in connection with operation of vehicles and other equipment on the base and in transit to and from the base. The Contractor shall follow all applicable OSHA regulations shall be followed.

1.5 Contractor Experience and Qualifications: The Contractor must have at least three (3) years of experience in utility scale wind turbine maintenance. The Contractor must demonstrate that the personnel who are supervising maintenance and repair technician teams, or the maintenance and repair technicians themselves are certified or licensed by Vestas to work on Vestas equipment. Certification or licensure shall be equivalent to that required for warranty maintenance on Vestas equipment.

1.6 Work Schedule: Scheduled preventative maintenance work may be conducted at the Contractor’s discretion. The Contractor shall notify the Contracting Officer or designated representative when contractor personnel will be servicing the turbines or performing unscheduled maintenance and repair.

1.7 Availability of Utility Services: All reasonable quantities of utilities will be made available to the Contractor without charge. Any temporary lines or connections that may be required will be installed, maintained and removed by the Contractor at their own expense and in a manner satisfactory to the Contracting Officer or designated representative. Removal of such connections of lines will be accomplished by the Contractor prior to final acceptance of the job.

1.8 Contract Period: The date for actual start of work will be coordinated between the Contractor and the Contracting Officer or designated representative.

SECTION 2: DESCRIPTION OF SERVICES

2.1 Standards of Performance. The Contractor shall perform the services in accordance with prudent wind industry practices and applicable laws in the U. S.

2.2 Areas of Contractor Responsibility. The contractor shall be responsible for maintenance, diagnostics and repair of the following:

Two Vestas V47 Wind Turbine Generators and Rotor assemblies including nacelle, generator, pumps, gearbox, controllers, sensors and all associated components;

Aviation hazard lights, associated controllers and GPS transceivers required for synchronous strobe operation;

All communication modules and modems necessary for remote monitoring and notification systems up to the base phone line connection;

All electrical power components and equipment on the generator side of the step-up transformers, up to the 690 Volt lugs of the transformer.

2.3 Initial Inspection and Evaluation. The Contractor shall perform an initial inspection and evaluation of the two wind turbines and document the findings and recommendations in a report to be provided to the Contracting Officer or designated representative within 40 calendar days of contract award. Any exceptions to the assumption that the extent of wear and tear is typical for Vestas V47 WTG’s operating under nominal conditions with appropriate scheduled maintenance that can be reasonably ascertained without equipment tear-down should be evaluated and documented in the report.

2.4 Scheduled Maintenance. The contractor shall perform all scheduled maintenance equivalent to that required by Vestas under a Vestas warranty program. Scheduled maintenance shall include lubrication, filter replacement, and component replacement that would typically be covered under a manufacturer’s warranty.

2.5 Unscheduled General Maintenance and Minor Repair. The contractor shall set up the turbines’ control systems to notify the contractor’s maintenance office when a shut down or alarm condition is encountered through the modem and dial-up connection. The contractor shall use appropriate software to communicate with the turbine controllers and respond to notifications from the turbine controllers either with remote reset or by dispatching a crew of technicians within 12 hours of the notification. Alternatively, the Contractor shall respond to notification by telephone of a problem by 90 CES personnel.

2.5.1 REPLACEMENT PARTS: The contractor will furnish, when required, all parts which cost up to $ 5,550.00 each and installation at no cost to the government. Replacement parts which cost in excess of $ 5,550.00 each, when required, will be competed on a separate Purchase Order. All replacement parts which cost over stated amount shall be submitted in writing to the Contracting Officer. The request shall show part number, description, model number, if applicable, manufacturer and/or distributor. Manufacturer/Distributor price lists will be made available to the Contracting Officer upon request. All replacement parts and maintenance will have a least a one year warranty. Only new standard parts or parts of equal quality shall be used in effecting repairs. Parts which have been replaced will become the property of the Government.

2.6 Unscheduled Major Repair. Major repair consisting of replacing parts costing over $5550.00 each will require a separate purchase order. The contractor shall provide evidence of the major repair requirement to include diagnostic test results for independent evaluation necessary as determined by the Contracting Officer or designated representative.

2.7 Securing Turbines for Extended Out-of-Service Periods. The Contractor shall secure the turbines within 24 hours of a fault resulting in an out-of-service turbine generator, when diagnostics indicate or repair parts lead time may require the turbine to remain out-of-service for more than 48 hours, by releasing the hydraulic rotor brake.

2.8 Communication and Reporting. The Contractor shall exchange information with the Contracting Officer or designated representative using the following methods:

2.8.1 Log Books. The Contractor shall keep a log book for each wind turbine inside the turbine tower at ground level for the recording and preservation of information concerning the identity and activity of all visitors to each Wind Turbine. All personnel and representatives of the government and Contractor shall be required to record their identity, the date, time and purpose of any visit to the wind turbine, the nature of any work performed thereon and such other details for which log books may reasonably be used.

2.8.2 Service Order Reports. For each visit to perform site services to a wind turbine, the Contractor shall prepare a written service report which describes (i) the parts used or replaced on the wind turbine and (ii) the site services performed by supplier on the wind turbine during such visit. The Contractor shall provide copies of all service reports for each wind turbine serviced by the Contractor on a monthly basis after the commencement date.

2.8.3 Emergency Notification. Upon obtaining knowledge thereof, the Contractor shall immediately notify the Contracting Officer or designated representative verbally (with Written Notice to follow within five (5) days) of any emergency or hazardous condition or occurrence of which the Contractor becomes aware that in any way affects, or could affect, the safe operation of the wind turbines or the project and the safety of personnel at the project site

2.8.4 Meetings. The Contractor shall support meetings called for by the Contracting Officer or designated representative.

2.9 Exclusions. The Contractor is not and shall not be held liable or have any obligation under this contract for any loss or damage to the turbine equipment (or any reduced availability) to the extent caused by or arising out of any of the following (except to the extent such loss or damage is the result of acts or omissions of the Contractor or its subcontractors):

2.9.1 Conditions at the Project Site, including wind shear, lightning, hail, ice or dust storms, which are outside the applicable operating or design parameters of the turbine equipment:

2.9.2 Services provided by, or the use of materials, layouts and designs, supplied or required by any person other than the Contractor and its subcontractors:

2.9.3 Abnormal wear, tear, erosion and corrosion caused by site conditions:

2.9.4 Vandalism and/or malicious mischief:

2.9.5 A Force Majeure Event.

2.10 Cooperation with Other Contractors. The Contractor shall reasonably cooperate with other contractors to allow the performance of the Contractor and their respective obligations to occur concurrently.

2.11 Hazardous Substances. The Contractor shall arrange and contract for the disposal, transportation and reporting of hazardous substances brought onto and released at the wind turbines site by the Contractor its subcontractors…