SOW Genie Repair and Service.pdf
PDF 95 KB Posted
- Attached to
- Genie Lift Repair
- Solicitation number
- FA452826QCS04
About this file
This is a Statement of Work for repair and certification services of a Genie S60 boom lift at Minot Air Force Base in North Dakota.
The contractor must inspect, repair, and recertify the Genie S60 boom lift (Serial #56007-15016) in accordance with ANSI/SAIA A92.22 standards and manufacturer specifications. The inspection must be conducted by a qualified Mobile Elevating Work Platform (MEWP) service technician and must include provision of a list and cost estimates for any deficiencies discovered. Upon successful completion, the contractor shall provide formal written certification that the lift has passed annual inspection and shall update the inspection identification markings on the lift with the inspection date and next required inspection interval. The contractor must replace the current Ford DSG-423 engine with a new Ford MSG-425 engine, replace all worn or damaged parts, and replace hydraulic and engine oil filters. All materials provided must be new, not refurbished. Any salvageable or unused parts identified during inspection must be transferred to the government vehicle custodian.
The contractor is responsible for all materials, labor, management, transportation, and incidentals necessary to complete the work at the contractor's facility. The contractor must coordinate pickup and delivery with the Government Point of Contact at least seven days prior to work start. Additional requirements include proper disposal of waste and unserviceable parts in compliance with Federal, State, local, and base environmental laws; adequate fire blocking for any new wiring or hosing; and contractor personnel must possess current REAL ID-compliant identification, automobile insurance, and vehicle registration to access Minot AFB.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| DAF Clauses.pdf | ||
| Wage Determination No. 2015-6025 Rev 4.pdf | ||
| APPENDIX A - SOW Genie Boom Lift.pdf | ||
| Provisions and Clauses.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
FOR
GENIE BOOM LIFT
REPAIR AND CERTIFICATION
AT
MINOT AFB, ND
1.0. INTRODUCTION. This Statement of Work (SOW) defines the requirements for the contractor to inspect, repair, and replace the engine and all worn or damaged parts, and replace hydraulic and engine oil and filters on the Genie S60 boom lift Serial #56007-15016 at Minot AFB, ND.
2.0. SCOPE. The contractor will provide all materials, labor, management, transportation, and other incidentals necessary to meet the requirements as stated in this SOW. All materials provided must be new and not refurbished.
2.1. Inspection. The contractor will perform an inspection and recertification in accordance with ANSI/SAIA A92.22 as well as manufacturer’s specifications and applicable manufacturer's bulletins (see Appendix A). Inspection must be conducted by a qualified Mobile Elevating Work Platform (MEWP) service technician. The contractor will provide a list and estimates to correct any deficiencies or repairs required to bring the lift up to passing ANSI/manufacturer standards. Upon successful completion of the test, the contractor shall provide the Government with a formal written certification stating the lift has passed the annual inspection in accordance with ANSI/SAIA A92.22 and manufacturer standards. The contractor shall update the inspection identification means on the lift. This marking must clearly identify the date this annual inspection was performed and the interval at which future annual inspections are required.
2.2. Replacement. Contractor will replace the current Ford DSG – 423 Engine with a new Ford MSG-425 Engine along with any worn or damaged parts, and replace hydraulic and engine oil filters. All salvageable or unused parts identified during the inspection will be transferred to the government vehicle custodian.
2.3. Transportation. All work will be performed at the contractor’s facility. Contractor is responsible for transporting the equipment to and from their facility. The contractor will coordinate pickup and delivery with the Government POC at least seven days prior to work start.
3.0. GENERAL REQUIREMENTS.
3.1. Waste Disposal. The contractor will dispose of waste to include unserviceable parts from this project off base and IAW Federal, State, local, and base environmental laws, and regulations.
3.2. Fire Suppression. Any new wiring or hosing shall use adequate fire blocking to meet or exceed the current standard in place.
3.3. Installation Access. A current REAL ID-compliant driver’s license, state-issued identification card, or U.S. passport, and a current automobile insurance document and vehicle registration will be required to a to gain access to Minot AFB.
3.3. Installation Access. A current REAL ID-compliant driver’s license, state-issued identification card, or U.S. passport, and a current automobile insurance document and vehicle registration will be required to a to gain access to Minot AFB.
File details come from the government source that posted it. Updated .