Attachment 1 - Salient Characteristics (Heated Gloves)(Revision 1).pdf

Salient Characteristics

For

Heated Gloves

Revision 1

Our intent is to have the Contractor supply heated insulated gloves to protect aircrew, maintenance crews, and security forces against extreme frigid winter conditions faced in North Dakota. Temperatures reaching -45 degrees and intense winds are common. These gloves must allow for the highest heating potential while still being dexterous enough for use in maintenance activities.

1. Impact resistance:

a. Thermal plastic knuckle guards or Reinforced knuckle and fingertip

b. Reinforced palm, (Leather or Composite Pierce Resistant Material)

2. Battery powered:

a. Interchangeable rechargeable batteries

b. 2 battery sets per glove pair.

i. One battery set is for usage.

ii. One battery set will be charging or replacement.

c. Capacity to charge both battery sets simultaneously,

i. Either one charge per battery set or one charger for multiple battery sets

ii. Batteries must be easily accessible and user replaceable.

d. Preferred Battery Location should be on top of the wrist.

e. Battery must be secured in manner to not fall-out.

3. Capability (minimum temperature and duration)

a. 135 degrees Fahrenheit for 3 hours

b. 120 degrees Fahrenheit for 5 hours

c. 100 degrees Fahrenheit for 8 hours

4. Style:

a. Visible green or blue light emission

b. Touch screen compatible

c. Waterproof

d. Leash or clip attachment

5. Color:

a. Coyote Brown preferred, with Tan or Black allowed for initial order to meet requirement timeline.

6. Dexterity

a. Individual wearing a size large glove must be able to

i. Pick up a ½ inch bolt off table.

ii. Insert index finger into a 1-inch diameter hole with full mobility.

7. Sizing

a. Small

b. Medium

c. Large

d. Extra Large

8. Gloves: heaters and batteries cannot have ability for wireless or Bluetooth communication.