Attachment_1_Statement_of_Need.pdf

Statement of Need

Title: Dual Source 50 Watt C02 / 30-Watt fiber laser etcher

436 MXS

Dover AFB, DE 19902

1. The scope of work for this project is as follows in this Statement of Need (SON).

The contractor shall furnish all equipment and materials unless otherwise specified. No alterations, additions, or deletions shall be made to the contract unless prior approval is given in writing by the Contracting Officer (CO).

436 MXS requests the purchase of laser etching system to clearly mark tools and equipment with Equipment Identification Designators in addition to creating inlay cuts in toolbox foam for quick inventory and accountability of tools in accordance with AFI 21-101 AMCSUP.

2. PROJECT DESCRIPTION: Purchase of laser etching system

a. Delivery of items include:

i. Dual source laser etching system that possess the following options:

1. Duel power laser source of 50 watt C02/ 30 Watt Fiber

2. 32" x 20" (812 x 508 mm) work area

3. Table capable of lifting 100 lbs.

4. Drop-down front door

5. Removable exhaust panel

6. LED lighting inside machine

7. Steel chassis

8. Self-lubricating bearings

9. Brushless DC servo motors

10. Lenses rated to 500 Watts

11. Visible laser beam to help position objects

12. Emergency stop feature

13. Gridded cutting table to raise materials off the table when cutting

14. Air assist compressor

15. Host Design Station to include: computer, monitor, scanner, and graphics software

16. Self-Contained HEPA Filtration

On-site training is Option CLIN 1003, training will be completed on all aspects of the equipment and software. The training shall be completed by certifed trainiers of the system not to exceed two days.