Attch 1 - Trailer Requirements-Specifications.pdf

PDF 423 KB Posted

Attached to
OSI Crime Scene Processing Trailer
Solicitation number
FA446021Q0015
Issued by

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Requirements:

Dual Axle 5200 lb - Torsion

18' Long 8.5 Wide 7' Tall Preferred but 6'6" Minimum

No Doors or Ramp on Rear of Trailer

Insulated Walls and Ceilings

White Exterior Color

.050 Gauge Aluminum Thickness

Screwless or Semi Screwless

LED Tail Lights and LED Back Up Lights

Electric Tongue Jack

Solar Trickle Charger for Battery

Spare Tire and Wheel to match trailer

Extended Tongue

Three Separate Spaces Inside Trailer As Listed Below with Requirements:

Office Space at Front of Trailer:

A 2' wide x 6' tall entry door on the passenger side with exterior keyed lock and hand lock on interior.

Solid non-porous (Metal or Melamine) work surface that is full width of trailer to use as a standing desk with a majority of the space underneath begin open for storage. Overhead cabinets for stoarge above the desk work surface with keyed locks. Solid non-porous (Metal or Melamine) cabinet top on opposite wall from desk wide enough to accommodate microwave and coffee pot. Enclosed, lockable cabinets underneath cabinet top and space for mini fridge. These cabinets should have adjustable shelves if possible. Overhead cabinets for storage above cabinet top with keyed locks. Heated and Cooled Space.

Electrical Outlets Sufficient to run the listed equipment and charge phones and other devices while using work surfaces. Please refer to provided drawings for examples. Sufficient LED lighting to be able to work and view all areas of the space. Flooring should be non-slip and be easy to clean. I.E. Rubber

Flooring. Walls and Ceiling should be white, smooth and if possible provide a surface capable of writing on with white board markers. Walls must be sturdy enough to be used to hang equipment. Seating for three persons and the ability to securely stow the seating, most likely padded folding chairs. Electrical

Service Panel for Trailer large enough to operate all trailer electrical needs.

Bathroom Space between Front and Back:

Single Bowl Sink with hot and cold water. Toilet capable to being flushed and dumped from outside of trailer. Potable Water tank capable of operating toilet and sink and black water tank for discharge. One

2' wide x 6' tall door into bathroom from Office Space. Must be lockable from inside bathroom. Flooring should be non-porous, easy to clean, I.E. Rubber Flooring. Sufficient LED lighting to be able to view all areas of space.

Evidence Processing/Storage Space:

2' wide x 6' tall separate passenger Side Entry Door with keyed lock on exterior and hand lock on interior. 30" x 30" passenger side window with vertical opening capable of being used as a pass through with a keyed exterior lockable door that covers the window when not in use. 18" deep x 30" wide Metal shelf under exterior of window that can be folded down and locked when not in used. One desk work area with (Metal or Melamine) work surface located along the back wall of the trailer for use by the scene commander with enough electrical outlets for a computer, printer and extra monitor. One desk area with (Metal or Melamine) work surface located underneath or beside the pass through window for used by evidence custodian with enough electrical outlets for a computer, printer and extra monitor. As much overhead storage as possible in the space with the layout provided by vendor. All cabinets must have keyed locks. Lower Cabinets of varying configurations. We require cabinets with varying size pull out drawers for storage of small items. Cabinets with adjustable shelves to accommodate larger items.

All cabinets need to be lockable. All cabinets should have a non-porous (Metal or Melamine) solid surface counter top to be used as processing surfaces. Flooring should be non-slip and be easy to clean.

I.E. Rubber Flooring. Walls and Ceiling should be white, smooth and if possible provide a surface capable of writing on with white board markers. Walls must be sturdy enough to be used to hang equipment.

Seating for two persons and the ability to securely stow the seating, most likely padded folding chairs.

Sufficient LED lighting to be able to view all areas of space. Electrical Outlets on walls behind work surfaces just above counter height. Refer to drawings for example locations. Heated and Cooled.

Exterior Trailer Requirements:

Generator with secure storage that is large enough to run heating/cooling and all other electrical requirements listed. LED Flood Lights on all sides of trailer sufficient to light the immediate area around the trailer for work. Each side must be switch separately from the other sides. Retractable power awning that covers the majority of the passenger side of the trailer. The awning should also have screening that when installed creates an exterior room space that cannot be viewed from the outside. At least two receptacles at different locations on all four side of the trailer. Self-leveling jacks installed on all four corners of the trailer for use when not attached to vehicle. Space to store a small amount of fuel for generator (10 Gallons) minimum. Any batteries required to operator listed systems. Chock and lock blocks (2).

File details come from the government source that posted it. Updated .