STATEMENT OF WORK Advanced SemiPrep.pdf

STATEMENT OF WORK

FOR

Advanced Semi-Prep and Water Training

1. DESCRIPTION OF SERVICES. Contractor shall provide all airplanes, AVGAS, equipment, tools, materials, personnel, supervision, quality control, and ground training necessary for safe and legal operation and maintenance of aircraft. Training shall be for three pilots to receive advanced semi-prep for two weeks between 22 Aug & 15 Sep 2021. Training must include extensive low-level flying through and landing in high altitude mountainous terrain, to include: unprepared-surface landings on sloped terrain, landings on completely unprepared surfaces, identification of suitable landing surfaces in mountainous terrain, and canyon escape maneuvers with engine-out and partial power loss scenarios. Additional training should include water landing training, to prepare aircrews for ditching scenarios. At least half of the flight time needs to be in a single engine aircraft.

1.1. Specific requirements for the two-week course must include:

1.1.1. 15 hours Supercub or equal for off-field unprepared surface landings and site selection

1.1.2. 4 hours float plane for water ditching exposure and threat identification during water operations

1.1.3. 4 hours King Air 100 / Cessna Caravan or similar type aircraft for unimproved surface operations and low level mountain flying

1.1.4. 15 hours ground time

2. GENERAL INFORMATION.

2.1. Contractor Personnel. The contractor must validate that the employees assigned to this requirement are certified to perform this level of training and possess the required experience to safely and effectively provide this training.

2.2. Contract Manager. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate or alternates, who shall act for the contractor when the manager is absent, shall be designated in writing to the contracting officer prior to the contract start date. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract.

2.3. Contractor Employees. Contractor personnel shall be easily recognized as contractor employees.

2.4. Aircraft. The contractor shall ensure all aircraft used to conduct training are registered and maintained per FAA regulations.