Specifications_REV20180810.pdf

MS0114

PROJECT NO: CP1018486 DATE: July 6, 2018 (100% Submittal) Specifications

DEPARTMENT OF THE AIR FORCE

SPECIAL OPERATIONS COMMAND

1 SPECIAL OPERATIONS WING

Renovate Community Commons, Bldg 90337

HURLBURT FIELD, FLORIDA

1255149268C Text Box REVISED: July 26, 2018 REVISED: August 6, 2018 REVISED: August 10, 2018

Project No: CP1018486 100% Submittal

Renovate Community Commons, Bldg 90337 Hurlburt Field, FL

PROJECT TABLE OF CONTENTS Page 1

PROJECT TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

01 11 00 01 14 00 01 30 00 01 33 00 01 35 13 01 35 26 01 42 00 01 50 00 01 57 19 01 78 00 01 78 23

SUMMARY OF WORK

WORK RESTRICTIONS

ADMINISTRATIVE REQUIREMENTS

SUBMITTAL PROCEDURES

SPECIAL PROJECT PROCEDURES

GOVERNMENTAL SAFETY REQUIREMENTS

SOURCES FOR REFERENCE PUBLICATIONS

TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

TEMPORARY ENVIRONMENTAL CONTROLS

CLOSEOUT SUBMITTAL

OPERATION AND MAINTENANCE DATA

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

02 82 16.00 20 ENGINEERING CONTROL OF ASBESTOS CONTAINING MATERIALS

DIVISION 03 - CONCRETE

03 20 00.00 10 CONCRETE REINFORCING

03 30 53 MISCELLANEOUS CAST-IN-PLACE CONCRETE

DIVISION 04 - MASONRY

04 20 00 UNIT MASONRY

DIVISION 05 - METALS

05 50 13 MISCELLANEOUS METAL FABRICATIONS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

06 10 00 ROUGH CARPENTRY

06 61 16 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 21 16 MINERAL FIBER BLANKET INSULATION

07 22 00 ROOF AND DECK INSULATION

07 24 00 EXTERIOR INSULATION AND FINISH SYSTEMS

07 52 00 MODIFIED BITUMINOUS MEMBRANE ROOFING

07 60 00 FLASHING AND SHEET METAL

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 14 00 WOOD DOORS

08 33 13 COILING COUNTER DOORS

08 33 23 OVERHEAD COILING GRILLES

08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

08 51 13 ALUMINUM WINDOWS

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

Project No: CP1018486 100% Submittal

Renovate Community Commons, Bldg 90337 Hurlburt Field, FL

PROJECT TABLE OF CONTENTS Page 2

DIVISION 09 - FINISHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 29 00 GYPSUM BOARD

09 30 13 CERAMIC TILING

09 51 00 ACOUSTICAL CEILINGS

09 65 00 RESILIENT FLOORING

09 67 23.13 STANDARD RESINOUS FLOORING

09 68 00 CARPETING

09 77 20 DECORATIVE FIBERGLASS REINFORCED WALL PANELS

09 90 00 PAINTS AND COATINGS

DIVISION 10 - SPECIALTIES

10 14 00.20 INTERIOR SIGNAGE

10 26 13 WALL AND CORNER GUARDS

DIVISION 12 - FURNISHINGS

12 24 13 ROLLER WINDOW SHADES

DIVISION 21 - FIRE SUPPRESSION

21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING (HVAC)

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 03 00.00 20 BASIC MECHANICAL MATERIALS AND METHODS

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 09 23 DIRECT DIGITAL CONTROL SYSTEM FOR HVAC

23 64 10 WATER CHILLERS, VAPOR COMPRESSION TYPE

23 64 26 CHILLED, CHILLED-HOT, AND CONDENSER WATER PIPING SYSTEMS

23 73 13.00 40 MODULAR INDOOR CENTRAL-STATION AIR-HANDLING UNITS

DIVISION 26 - ELECTRICAL

26 12 19.10 26 20 00 26 51 00

THREE-PHASE PAD-MOUNTED TRANSFORMERS

INTERIOR DISTRIBUTION SYSTEM

INTERIOR LIGHTING

DIVISION 28 – ELECTRONIC SAFETY AND SECURITY

28 31 00 FIRE DETECTION AND ALARM SYSTEMS

ASBESTOS SURVEYS

AB1 Model 11x17 Asbestos LBP Survey 20 Oct 2014 Landing Zone Asbestos Final Report Landing Zone Asbestos Removal Drawing

-- End of Project Table of Contents --

REVISED 8/10/2018

1255149268C Text Box

REVISED 7/26/2018

1255149268C Polygon

1255149268C Text Box

REVISED 8/6/2018

1255149268C Polygon

1255149268C Polygon

Standard Sections 01 Section01

Section 01 11 00 Page 1

SECTION 01 11 00

SUMMARY OF WORK

08/15

PART 1 GENERAL

1.1 WORK COVERED BY CONTRACT DOCUMENTS

1.1.1 Project Description

Architecture: This project focuses primarily on the Library and Velocity Subs portions of Building 90337, involving approximately 9,100 square feet of interior space, and approximately 1,538 square feet of exterior space at the southwest corner to create a new outside patio to serve the new Coffee Café facility. This will include selective demolition of interior finish systems including asbestos removal and minor roof structure. New work will include slight reconfiguration with non load-bearing interior partitions, doors and finish systems.

1.1.2 Location

The work is located at Building 90337, approximately as indicated. The exact location will be shown by the Contracting Officer.

1.2 OCCUPANCY OF PREMISES

The entire building will be vacated during the entire course of the work.

Before work is started, arrange with the Contracting Officer a sequence of procedure, means of access, space for storage of materials and equipment, and use of approaches, corridors, and stairways.

1.3 LOCATION OF UNDERGROUND UTILITIES

Obtain digging permits prior to start of excavation, and comply with Installation requirements for locating and marking underground utilities.

Digging permits must be submitted at least 2 weeks prior to excavating.

Contact local utility locating service a minimum of 72 hours prior to excavating, to mark utilities, and within sufficient time required if work occurs on a Monday or after a Holiday. Verify existing utility locations indicated on contract drawings, within area of work.

[1.4 GOVERNMENT-FURNISHED MATERIAL AND EQUIPMENT

Pursuant to Contract Clause "FAR 52.245-1, Government Property", the Government will furnish the following materials and equipment for installation by the Contractor:

DESIGNATION NO. DESCRIPTION QUANTITY

Section 01 11 00 Page 2

Quantities indicated for the above-listed items marked with an asterisk are estimates. It is the intention of the Government to furnish all quantities of the asterisk items required to complete the work as specified, and the various quantities will be adjusted when necessary. Quantities stated for the above items not marked with an asterisk are all that will be furnished by the Government. Provide any additional quantities that are required.

1.4.1 Delivery Schedule

[Notify the Contracting Officer in writing at least [_____] calendar days in advance of the date on which the materials and equipment are required. Pick up materials and equipment no later than 30 calendar days after such date.

][Materials and equipment will be available on or after [_____] calendar days after the award of contract.

]1.4.2 Delivery Location

The materials and equipment [are located at [_____]] [are located within [_____] miles of the jobsite] [will be delivered to [_____]][the salvage receiving point [_____]].

][1.5 GOVERNMENT-INSTALLED WORK

]1.6 SALVAGE MATERIAL AND EQUIPMENT

Items designated by the Contracting Officer to be salvaged remain the property of the Government. Segregate, itemize, deliver and off-load the salvaged property at the Government designated storage area located within the base perimeter.

PART 2 PRODUCTS

Not used.

PART 3 EXECUTION

Not used.

-- End of Section --

Section 01 14 00 Page 1

SECTION 01 14 00

WORK RESTRICTIONS

11/11

PART 1 GENERAL

1.1 SPECIAL SCHEDULING REQUIREMENTS

a. Have materials, equipment, and personnel required to perform the work at the site prior to the commencement of the work.

b. The entire building will be vacated during the entire course of the work.

c. Permission to interrupt any roads or utility service must be requested a minimum of 14 calendar days prior to the desired date of interruption. Road cuts are not allowed unless specifically identified in the design documents.

1.2 CONTRACTOR ACCESS AND USE OF PREMISES

1.2.1 Base Regulations

Ensure that Contractor personnel employed on the Base become familiar with and obey Base regulations including safety, fire, traffic and security regulations. Keep within the limits of the work and avenues of ingress and egress. Wear hard hats in designated areas. Do not enter any restricted areas unless required to do so and until cleared for such entry. Mark Contractor equipment for identification.

1.2.1.1 Identification Badges and Installation Access

Application for and use of badges will be as directed by the Contracting Officer. Immediately report instances of lost or stolen badges to the Contracting Officer.

1.2.1.2 No Smoking Policy

Smoking is prohibited within and outside of all buildings on installation, except in designated smoking areas. This applies to existing buildings, buildings under construction and buildings under renovation. Discarding tobacco materials other than into designated tobacco receptacles is considered littering and is subject to fines. The Contracting Officer will identify designated smoking areas.

1.2.2 Working Hours

Regular working hours must consist of a period between 7 a.m. and 4:00 p.m., Monday through Friday, excluding Government holidays.

1.2.3 Work Outside Regular Hours

Work outside regular working hours requires Contracting Officer approval.

Make application 72 hours prior to such work to allow arrangements to be

Section 01 14 00 Page 2 made by the Government for inspecting the work in progress, giving the specific dates, hours, location, type of work to be performed, contract number and project title. Based on the justification provided, the Contracting Officer may approve work outside regular hours. During periods of darkness, the different parts of the work must be lighted in a manner approved by the Contracting Officer. Make utility cutovers after normal working hours or on Saturdays, Sundays, and Government holidays unless directed otherwise.

1.2.4 Utility Cutovers and Interruptions

a. Make utility cutovers and interruptions after normal working hours or on Saturdays, Sundays, and Government holidays. Conform to procedures required paragraph WORK OUTSIDE REGULAR HOURS.

b. Ensure that new utility lines are complete, except for the connection, before interrupting existing service.

c. Interruption to water, sanitary sewer, storm sewer, telephone service, electric service, air conditioning, heating, fire alarm, compressed air, and other major utilities are considered utility cutovers pursuant to the paragraph WORK OUTSIDE REGULAR HOURS.

PART 2 PRODUCTS

Not Used

PART 3 EXECUTION

Not Used

-- End of Section --

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 1a

Standard Sections 01

01 30 00 SD-01 Preconstruction Submittals

1.4 GCONTRACT PROGRESS

SCHEDULE/REPORT

SD-04 Samples

1.3 GColor Boards

01 33 00 SD-01 Preconstruction Submittals

1.7Submittal Register 01 35 26 SD-07 Certificates

GConfined Space Entry Permit 1.7.1Hot Work Permit

01 50 00 SD-01 Preconstruction Submittals 1.3Construction Site Plan

3.4.1 GTraffic Control Plan

SD-06 Test Reports

1.4 GBackflow Preventer Tests

01 57 19 SD-01 Preconstruction Submittals

1.5.1 GRegulatory Notifications

1.6 GEnvironmental Protection Plan

3.2.1.2 GStormwater Notice of Intent

3.2.1.1 GStormwater Pollution Prevention

Plan (SWPPP) GDewatering Permit

SD-06 Test Reports

3.7.1.1 GSolid Waste Management Report

SD-11 Closeout Submittals

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

(a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r)

SUBMITTAL FORM,Jan 96 PREVIOUS EDITION IS OBSOLETE PAGE 1b

Standard Sections 01

01 57 19 3.2.1.4 GStormwater Pollution Prevention Plan Compliance Notebook

3.2.1.5 GStormwater Notice of Termination

3.7.1.1 GSolid Waste Management Report

1.5.1 GRegulatory Notifications

3.20 GCertification of No

Asbestos/Lead-based Paint/PCB Letter

01 78 00 SD-03 Product Data

1.4.1 GWarranty Management Plan

SD-08 Manufacturer’s Instructions Instructions

SD-10 Operation and Maintenance Data

3.3Operation and Maintenance Manuals

SD-11 Closeout Submittals

3.1 GAs-Built Drawings

3.2 GRecord Drawings

01 78 23 SD-10 Operation and Maintenance Data

1.3 GO&M Database

3.1.1 GTraining Content

SUBMITTAL REGISTER

CONTRACT NO.

TITLE AND LOCATION CONTRACTOR

CONTRACTOR:

SCHEDULE DATES

CONTRACTOR

ACTION

APPROVING AUTHORITY

A C T I V I T Y

N O

T R A N S M I T T A L

N O

S P E C

S E C T

DESCRIPTION

ITEM SUBMITTED

P A R A G R A P H

C L A S S I F I C A T I O N

G O V T

O R

A E

R E V W

R SUBMIT

APPROVAL

NEEDED

BY

MATERIAL

NEEDED

BY

A C T I O N

C O D E

DATE

OF

ACTION

DATE FWD

TO APPR

AUTH/

DATE RCD

FROM

CONTR

DATE FWD

TO OTHER

REVIEWER

DATE RCD

FROM OTH

REVIEWER

A C T I O N

C O D E

DATE

OF

ACTION

MAILED

TO

CONTR/

DATE RCD

FRM APPR

AUTH REMARKS

(a) (b) (c) (d) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r)

(a) (b) (c) (e) (f) (g) (h) (i) (j) (k) (l) (m) (n) (o) (p) (q) (r)

Line

Acti vity

Trans-mittal #

Specification Section

SD

# Submittal Description Item Submitted Paragraph #

Classificati on: GOVT or A/E Revwr Submit

Approval Needed

By

Material Needed

By Action Code

Date Of Action

Date FWD to APPR / Auth Date RCD From

CONTR

Date FWD To

Other Revwr

Date

RCD

From Other Revwr

Action Code

Date Of Action

Mailed To

CONTR/

Date RCD From

APPR

Authority Remarks

26 02 41 00 01 Preconstruction Submittals Demolition Plan 1.2.1 G

27 02 41 00 01 Preconstruction Submittals Existing Conditions 1.9

28 02 41 00 07 Certificates Notification 1.6 G

29 02 82 16.00 20 03 Product Data Local Exhaust Equipment 3.1.4 G

30 02 82 16.00 20 03 Product Data Vacuums 3.1.5 G

31 02 82 16.00 20 03 Product Data Respirators 3.1.1.1 G

32 02 82 16.00 20 03 Product Data Pressure Differential Automatic Recording Instrument 3.1.4 G

33 02 82 16.00 20 03 Product Data Amended Water 1.2.2 G

TITLE: Renovate Community Commons B90337

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

Page 1c of 15

TITLE: Renovate Community Commons B90337

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

34 02 82 16.00 20 03 Product Data Material Safety Data Sheets (Msds) for all materials 1.3.8 G

35 02 82 16.00 20 06 Test Reports Air Sampling Results 1.5.5 G

36 02 82 16.00 20 06 Test Reports Pressure Differential Recordings For Local Exhaust System 1.5.6 G

37 02 82 16.00 20 06 Test Reports Asbestos Disposal Quantity Report 3.3.3.2 G

38 02 82 16.00 20 06 Test Reports Clearance Sampling 3.2.5.2 G

39 02 82 16.00 20 07 Certificates Asbestos Hazard Abatement Plan 1.3.9 G

40 02 82 16.00 20 07 Certificates Testing Laboratory 1.3.10 G

41 02 82 16.00 20 07 Certificates Private Qualified Person Documentation 1.5.1 G

42 02 82 16.00 20 07 Certificates Contractor's License 1.5.4 G

43 02 82 16.00 20 07 Certificates Competent Person 1.5.2 G

44 02 82 16.00 20 07 Certificates Worker's License 1.5.3 G

45 02 82 16.00 20 07 Certificates Landfill Approval 1.3.11 G

46 02 82 16.00 20 07 Certificates Employee Training 1.3.3 G

47 02 82 16.00 20 07 Certificates Medical Certification 1.3.12 G

48 02 82 16.00 20 07 Certificates Waste Shipment Records 1.3.11 G

49 02 82 16.00 20 07 Certificates Respiratory Protection Program 1.3.6 G

50 02 82 16.00 20 07 Certificates Delivery Tickets 1.3.11 G

51 02 82 16.00 20 07 Certificates Vacuums 3.1.5 G

52 02 82 16.00 20 07 Certificates Water Filtration Equipment 3.1.2.3 G

53 02 82 16.00 20 07 Certificates Ventilation Systems 3.1.5 G

54 02 82 16.00 20 07 Certificates Equipment Used To Contain Airborne Asbestos Fibers 3.1 G

55 02 82 16.00 20 07 Certificates Notifications 1.3.4

56 02 82 16.00 20 11 Closeout Submittals Notifications 1.3.4 G

57 02 82 16.00 20 11 Closeout Submittals Rental Equipment 1.6.1 G

58 02 82 16.00 20 11 Closeout Submittals Respirator Program Records 1.3.6.1 G

59 02 82 16.00 20 11 Closeout Submittals Permits and Licenses 1.3.4 G

60 03 20 00.00 10 02 Shop Drawings Reinforcement 3.1 G

61 03 20 00.00 10 07 Certificates Reinforcing Steel 2.2

62 03 30 53 02 Shop Drawings Installation Drawings 1.5 G

63 03 30 53 03 Product Data Air-Entraining Admixture 2.2.3.1

64 03 30 53 03 Product Data Water-Reducing or Retarding Admixture 2.2.3.2

65 03 30 53 03 Product Data Curing Materials 2.2.8

66 03 30 53 03 Product Data Expansion Joint Filler Strips, Premolded 2.2.6

67 03 30 53 03 Product Data Batching and Mixing Equipment 3.1.3.3

68 03 30 53 03 Product Data Conveying and Placing Concrete 3.2

69 03 30 53 03 Product Data Mix Design Data 2.3 G

70 03 30 53 03 Product Data Ready-Mix Concrete 2.3

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

71 03 30 53 03 Product Data Curing Compound 2.4.2

72 03 30 53 03 Product Data Mechanical Reinforcing Bar Connectors 2.2.5

73 03 30 53 06 Test Reports Aggregates 2.2.2

74 03 30 53 06 Test Reports Concrete Mixture Proportions 2.1.3 G

75 03 30 53 06 Test Reports Compressive Strength Testing 3.9.3 G

76 03 30 53 06 Test Reports Slump 3.9.3 G

77 03 30 53 06 Test Reports Air Content 3.9.3

78 03 30 53 06 Test Reports Water 2.2.4

79 03 30 53 07 Certificates Cementitious Materials 2.2.1

80 03 30 53 07 Certificates Aggregates 2.2.2

81 03 30 53 07 Certificates Delivery Tickets 2.3

82 03 30 53 08 Manufacturer’s Instructions Chemical Floor Hardener 2.4.1

83 03 30 53 08 Manufacturer’s Instructions Curing Compound 2.4.2

84 04 20 00 02 Shop Drawings Cut CMU 3.3.2.1 G

85 04 20 00 02 Shop Drawings Detail Drawings 3.4.1.1 G

86 04 20 00 03 Product Data Cement 2.2.2.1.1

87 04 20 00 04 Samples Concrete Masonry Units (CMU) 2.2.2.1

88 04 20 00 04 Samples Anchors, Ties, and Bar Positioners 2.6.2

89 04 20 00 04 Samples Joint Reinforcement 2.6.3 G

90 04 20 00 05 Design Data Masonry Compressive Strength 2.1.2 G

91 04 20 00 05 Design Data Bracing Calculations 3.2.4

92 04 20 00 06 Test Reports Field Testing of Mortar 3.6.1.1

93 04 20 00 06 Test Reports Field Testing of Grout 3.6.1.2

94 04 20 00 06 Test Reports Cementitious Materials 2.4.1.1

95 04 20 00 06 Test Reports Admixtures for Masonry Mortar 2.4.1.3

96 04 20 00 06 Test Reports Admixtures for Grout 2.4.2.2

97 04 20 00 06 Test Reports Joint Reinforcement 2.6.3

98 05 50 13 02 Shop Drawings Angles and Plates 2.3 G

99 06 10 00 06 Test Reports Preservative-treated 1.4.3

100 06 10 00 06 Test Reports Preservative treatment 1.7

101 06 61 16 02 Shop Drawings Installation 3.1

102 06 61 16 03 Product Data Solid polymer material 2.1

103 06 61 16 03 Product Data Fabrications 2.3

104 06 61 16 04 Samples Material 2.1

105 06 61 16 04 Samples Counter Tops 2.3.4

106 06 61 16 07 Certificates Qualifications 1.4.1

107 06 61 16 10 Operation and Maintenance Data Clean-up 3.2

108 07 21 16 03 Product Data Blanket Insulation 2.1

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

109 07 21 16 03 Product Data Accessories 2.3

110 07 21 16 08 Manufacturer’s Instructions Insulation 3.3.1

111 07 22 00 02 Shop Drawings Insulation Board Layout 1.3 G

112 07 22 00 03 Product Data Insulation 2.1 G

113 07 22 00 03 Product Data Protection Board 1.4 G

114 07 22 00 03 Product Data Fasteners 2.5 G

115 07 22 00 03 Product Data Sheathing Paper 2.4 G

116 07 22 00 06 Test Reports Flame Spread Rating 1.7.1 G

117 07 22 00 07 Certificates Installer Qualifications 1.6 G

118 07 22 00 08 Manufacturer’s Instructions Fasteners 2.5 G

119 07 22 00 08 Manufacturer’s Instructions Insulation 2.1 G

120 07 24 00 02 Shop Drawings Shop Drawings 3.3 G G

121 07 24 00 03 Product Data Sheathing Board 2.2

122 07 24 00 03 Product Data Thermal Insulation 2.6

123 07 24 00 03 Product Data Adhesive 2.3

124 07 24 00 03 Product Data Mechanical Fasteners 2.5

125 07 24 00 03 Product Data Accessories 2.12

126 07 24 00 03 Product Data Base Coat 2.7

127 07 24 00 03 Product Data Portland Cement 2.8

128 07 24 00 03 Product Data Reinforcing Fabric 2.9

129 07 24 00 03 Product Data Finish Coat 2.10

130 07 24 00 03 Product Data Joint Sealant 2.13

131 07 24 00 03 Product Data Sealant Primer 2.11

132 07 24 00 03 Product Data Bond Breaker 2.14

133 07 24 00 03 Product Data Backer Rod 2.15

134 07 24 00 03 Product Data Warranty 1.7

135 07 24 00 05 Design Data Wind Load 1.2.1.2

136 07 24 00 06 Test Reports Abrasion Resistance 1.2.3.1

137 07 24 00 06 Test Reports Accelerated Weathering 1.2.3.2

138 07 24 00 06 Test Reports Impact Resistance 1.2.2.3

139 07 24 00 06 Test Reports Mildew Resistance 1.2.3.3

140 07 24 00 06 Test Reports Salt Spray Resistance 1.2.3.4

141 07 24 00 06 Test Reports Absorption-Freeze-Thaw 1.2.3.6

142 07 24 00 06 Test Reports Wall Fire Test 1.2.1.3

143 07 24 00 06 Test Reports Water Penetration 1.2.1.1

144 07 24 00 06 Test Reports Water Resistance 1.2.3.5

145 07 24 00 06 Test Reports Full Scale or Intermediate Scale Fire Test 1.2.1.3

146 07 24 00 06 Test Reports Surface Burning Characteristics 1.2.2.1

147 07 24 00 06 Test Reports Radiant Heat 1.2.2.2

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

148 07 24 00 06 Test Reports Substrate 3.1

149 07 24 00 06 Test Reports Wind Load 1.2.1.2

150 07 24 00 07 Certificates Qualifications of EIFS Manufacturer 1.4.1

151 07 24 00 07 Certificates Qualification of EIFS Installer 1.4.2

152 07 24 00 07 Certificates Qualification of Sealant Applicator 1.4.3

153 07 24 00 08 Manufacturer’s Instructions Installation 3.3

154 07 24 00 10 Operation and Maintenance Data EIFS 1.7

155 07 52 00 02 Shop Drawings Roof plan 1.4.6 G

156 07 52 00 03 Product Data Modified Bitumen Sheets 2.1 G

157 07 52 00 03 Product Data Asphalt 2.3 G

158 07 52 00 03 Product Data Primer 2.5 G

159 07 52 00 03 Product Data Modified Bitumen Roof Cement 2.6 G

160 07 52 00 03 Product Data Pre-Manufactured Accessories 2.9

161 07 52 00 03 Product Data Fasteners And Plates 2.8 G

162 07 52 00 03 Product Data Warranty 1.9 G

163 07 52 00 05 Design Data Wind Uplift Calculations 1.4.5 G

164 07 52 00 07 Certificates Qualification of Manufacturer 1.4.1

165 07 52 00 07 Certificates Qualification of Applicator 1.4.2

166 07 52 00 07 Certificates Qualification of Engineer of Record 1.4.3

167 07 52 00 07 Certificates Bill of Lading 1.5.1

168 07 52 00 07 Certificates Wind Uplift Resistance 1.4.5 G

169 07 52 00 07 Certificates Fire Resistance 1.4.4 G

170 07 52 00 08 Manufacturer’s Instructions Modified Bitumen Membrane Application 3.3.4 G

171 07 52 00 08 Manufacturer’s Instructions Flashing 3.3.5 G

172 07 52 00 08 Manufacturer’s Instructions Temperature Limitations for Asphalt 3.2.3.1

173 07 52 00 08 Manufacturer’s Instructions Primer 2.5

174 07 52 00 08 Manufacturer’s Instructions Fasteners 2.8.1

175 07 52 00 08 Manufacturer’s Instructions Cold Weather Installation 1.6 G

176 07 52 00 11 Closeout Submittals Warranty 1.9

177 07 52 00 11 Closeout Submittals Information Card 3.8

178 07 52 00 11 Closeout Submittals Instructions To Government Personnel 3.7

179 07 60 00 02 Shop Drawings Covering on flat, sloped, or curved surfaces 3.1.17

180 07 60 00 02 Shop Drawings Gutters 3.1.15 G

181 07 60 00 02 Shop Drawings Downspouts 3.1.16 G

182 07 60 00 02 Shop Drawings Expansion joints 3.1.18 G

183 07 60 00 02 Shop Drawings Gravel stops and fascias 3.1.13 G

184 07 60 00 02 Shop Drawings Base flashing 3.1.10 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

185 07 60 00 02 Shop Drawings Counterflashing 3.1.11 G

186 07 60 00 02 Shop Drawings Reglets 3.1.12 G

187 07 60 00 02 Shop Drawings Drip edge 3.1.14 G

188 07 84 00 02 Shop Drawings Firestopping Materials 2.1

189 07 84 00 06 Test Reports Inspection 3.3

190 07 84 00 07 Certificates Firestopping Materials 2.1

191 07 84 00 07 Certificates Installer Qualifications 1.4.1

192 07 92 00 03 Product Data Sealants 2.1 G

193 07 92 00 03 Product Data Primers 2.2 G

194 07 92 00 03 Product Data Bond Breakers 2.3 G

195 07 92 00 03 Product Data Backstops 2.4 G

196 07 92 00 03 Product Data Field Adhesion 3.1 G

197 07 92 00 07 Certificates Sealant 3.4.7 G

198 07 92 00 07 Certificates Volatile Organic Compounds (VOC) Content 1.4 G

199 07 92 00 07 Certificates Volatile Organic Compounds (VOC) Content 2.1.1 G

200 08 11 13 02 Shop Drawings Doors 2.1 G

201 08 11 13 02 Shop Drawings Doors 2.1 G

202 08 11 13 02 Shop Drawings Frames 2.4 G

203 08 11 13 02 Shop Drawings Frames 2.4 G

204 08 11 13 02 Shop Drawings Weatherstripping 2.5

205 08 11 13 03 Product Data Doors 2.1 G

206 08 11 13 03 Product Data Frames 2.4 G

207 08 14 00 02 Shop Drawings Doors 2.1 G

208 08 14 00 03 Product Data Doors 2.1 G

209 08 14 00 03 Product Data Accessories 2.2

210 08 14 00 03 Product Data Water-resistant sealer 2.3.6

211 08 14 00 03 Product Data warranty 1.4 G

212 08 33 13 02 Shop Drawings Detail Drawings 1.3 G

213 08 33 13 03 Product Data Warranty 1.5

214 08 33 13 03 Product Data Rolling Counter Doors 2.1

215 08 33 13 03 Product Data Installation 3.1

216 08 33 13 03 Product Data Cleaning 3.4

217 08 33 13 06 Test Reports Drop-test 3.3

218 08 33 13 11 Closeout Submittals Fire-Rated Rolling Counter Door 2.4

219 08 33 23 02 Shop Drawings Counterbalancing Mechanism 2.2.3

220 08 33 23 02 Shop Drawings Electric Door Operators 2.2.4

221 08 33 23 02 Shop Drawings Bottom Bars 2.2.1.3

222 08 33 23 02 Shop Drawings Guides 2.1.1.1

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

223 08 33 23 02 Shop Drawings Mounting Brackets 2.2.3.1

224 08 33 23 02 Shop Drawings Overhead Drum 2.2.1.7

225 08 33 23 02 Shop Drawings Installation Drawings 2.1.1.1

226 08 33 23 03 Product Data Hardware 2.2.2

227 08 33 23 03 Product Data Counterbalancing Mechanism 2.2.3

228 08 33 23 03 Product Data Electric Door Operators 2.2.4

229 08 33 23 05 Design Data Counterbalancing Mechanism 2.2.3

230 08 33 23 05 Design Data Electric Door Operators 2.2.4

231 08 33 23 10 Operation and Maintenance Data Operation and Maintenance Manuals 3.3.2

232 08 33 23 10 Operation and Maintenance Data Materials 3.3.2

233 08 33 23 10 Operation and Maintenance Data Devices 3.3.2

234 08 33 23 10 Operation and Maintenance Data Procedures 3.3.2

235 08 33 23 10 Operation and Maintenance Data Manufacture's Brochures 3.3.2

236 08 33 23 10 Operation and Maintenance Data Parts Lists 3.3.2

237 08 33 23 11 Closeout Submittals Warranty 3.3.1

238 08 41 13 01 Preconstruction Submittals Sample Warranty 1.2.1 G

239 08 41 13 04 Samples Finish and Color Samples 1.2.1 G

240 08 41 13 06 Test Reports Certified Test Reports 1.2.1 G

241 08 41 13 07 Certificates Manufacturer's Product Warranty 3.4 G

242 08 51 13 02 Shop Drawings Windows 2.1

243 08 51 13 02 Shop Drawings Fabrication Drawings 1.9

244 08 51 13 03 Product Data Windows 2.1

245 08 51 13 03 Product Data Fasteners 2.2.2

246 08 51 13 03 Product Data Window Performance 1.10

247 08 51 13 03 Product Data Accessories 2.2.5

248 08 51 13 03 Product Data Adhesives 2.2.3

249 08 51 13 03 Product Data Thermal Performance 1.10.5

250 08 51 13 04 Samples Finish Sample 1.4.2.1

251 08 51 13 05 Design Data Structural Calculations for Deflection 2.1

252 08 51 13 05 Design Data Design Analysis 1.4.3

253 08 51 13 06 Test Reports Minimum Condensation Resistance Factor 1.4.4

254 08 51 13 06 Test Reports Standard Airblast Test 1.10.2.3

255 08 71 00 02 Shop Drawings Hardware Schedule 1.4 G

256 08 71 00 02 Shop Drawings Keying System 2.3.5 G

257 08 71 00 03 Product Data Hardware Items 2.3 G

258 08 71 00 08 Manufacturer’s Instructions Installation 3.1

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

259 08 71 00 10 Operation and Maintenance Data Hardware Schedule 1.4 G

260 08 71 00 11 Closeout Submittals Key Bitting 1.5.1

261 08 81 00 03 Product Data Insulating Glass 1.5.1

262 08 81 00 07 Certificates Insulating Glass 1.5.1

263 08 81 00 08 Manufacturer’s Instructions Setting and sealing materials 2.3

264 08 81 00 08 Manufacturer’s Instructions Glass setting 3.2

265 09 22 00 02 Shop Drawings Metal support systems 2.1 G

266 09 29 00 03 Product Data Gypsum Boards 2.1.1

267 09 29 00 03 Product Data Accessories 2.1.5

268 09 29 00 03 Product Data Joint Treatment Materials 2.1.3

269 09 29 00 07 Certificates Asbestos Free Materials 2.1 G

270 09 29 00 08 Manufacturer’s Instructions Material Safety Data Sheets 2.1

271 09 29 00 10 Operation and Maintenance Data Manufacturer maintenance instructions 2.1

272 09 30 13 02 Shop Drawings Detail Drawings 3.2

273 09 30 13 03 Product Data Tile 2.1

274 09 30 13 03 Product Data Tile 2.1

275 09 30 13 03 Product Data Setting-Bed 2.2

276 09 30 13 03 Product Data Mortar, Grout, and Adhesive 2.4

277 09 30 13 04 Samples Tile 2.1

278 09 30 13 04 Samples Transition Strips 2.1

279 09 30 13 04 Samples Transition Strips 2.5

280 09 30 13 04 Samples Grout 2.4

281 09 30 13 07 Certificates Tile 2.1

282 09 30 13 07 Certificates Mortar, Grout, and Adhesive 2.4

283 09 30 13 08 Manufacturer’s Instructions Maintenance Instructions 3.7

284 09 30 13 10 Operation and Maintenance Data Installation 3.2

285 09 30 13 11 Closeout Submittals Tile 2.1

286 09 51 00 02 Shop Drawings Approved Detail Drawings 1.2

287 09 51 00 04 Samples Acoustical Units 2.1

288 09 51 00 04 Samples Acoustic Ceiling Tiles 2.1.1

289 09 51 00 06 Test Reports Ceiling Attenuation Class and Test 1.2.1

290 09 51 00 07 Certificates Acoustic Ceiling Tiles 2.1.1

291 09 65 00 02 Shop Drawings Resilient Flooring and Accessories 2.8 G

292 09 65 00 03 Product Data Resilient Flooring and Accessories 2.8 G

293 09 65 00 03 Product Data Adhesives 2.4

294 09 65 00 03 Product Data Vinyl Composition Tile 2.1

295 09 65 00 03 Product Data Wall Base 2.2

296 09 65 00 04 Samples Resilient Flooring and Accessories 2.8 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

297 09 65 00 04 Samples Moisture, Alkalinity and Bond Tests 3.3 G

298 09 65 00 08 Manufacturer’s Instructions Surface Preparation 3.2 G

299 09 65 00 08 Manufacturer’s Instructions Installation 3.1 G

300 09 67 23.13 02 Shop Drawings Installation Drawings 2.1 G

301 09 67 23.13 03 Product Data Manufacturer's Catalog Data 1.2.1 G

302 09 67 23.13 04 Samples Hardboard Mounted Epoxy Flooring 1.5.2 G

303 09 67 23.13 04 Samples Floor Topping 3.1.4 G

304 09 67 23.13 05 Design Data Design Mix Data 1.2.2 G

305 09 67 23.13 11 Closeout Submittals Warranty 1.6 G

306 09 68 00 03 Product Data Carpet 2.1 G

307 09 68 00 03 Product Data Physical Characteristics 2.1.1

308 09 68 00 04 Samples Carpet 2.1 G

309 09 68 00 06 Test Reports Moisture and Alkalinity Tests 3.2 G

310 09 68 00 07 Certificates Carpet 2.1

311 09 68 00 07 Certificates Regulatory Requirements 1.3

312 09 68 00 08 Manufacturer’s Instructions Surface Preparation 3.1

313 09 68 00 08 Manufacturer’s Instructions Installation 3.4

314 09 68 00 10 Operation and Maintenance Data Carpet 2.1 G

315 09 68 00 10 Operation and Maintenance Data Cleaning and Protection 3.5 G

316 09 77 20 04 Samples Samples for Verification 2.5

317 09 77 20 08 Manufacturer’s Instructions Manufacturers Material Safety Data Sheets (MSDS) 2.6

318 09 90 00 03 Product Data Certification 1.4.2

319 09 90 00 03 Product Data Materials 2.1

320 09 90 00 03 Product Data Coating 2.1 G

321 09 90 00 03 Product Data Manufacturer's Technical Data Sheets 2.1

322 09 90 00 04 Samples Color 1.10 G

323 09 90 00 07 Certificates Applicator's qualifications 1.3

324 09 90 00 07 Certificates Qualification Testing 1.4.1.2 G

325 09 90 00 08 Manufacturer’s Instructions Application instructions 3.2.1

326 09 90 00 08 Manufacturer’s Instructions Mixing 3.5.2

327 09 90 00 08 Manufacturer’s Instructions Manufacturer's Material Safety Data Sheets 1.7.2

328 09 90 00 10 Operation and Maintenance Data Coatings: 2.1 G

329 10 14 00.20 03 Product Data Installation 3.1

330 10 14 00.20 03 Product Data Warranty 1.6

331 10 14 00.20 04 Samples Interior Signage 1.4.1

332 10 14 00.20 04 Samples Software 1.3

333 10 14 00.20 10 Operation and Maintenance Data Approved Manufacturer's Instructions 3.1

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

334 10 14 00.20 10 Operation and Maintenance Data Protection and Cleaning 3.1.2

335 10 26 13 03 Product Data Corner Guards 2.2 G

336 10 26 13 04 Samples Finish 2.4 G

337 10 26 13 06 Test Reports Corner Guards 2.2

338 10 26 13 07 Certificates Corner Guards 2.2

339 12 24 13 02 Shop Drawings Installation 3.2 G

340 12 24 13 03 Product Data Window Shades 2.1 G

341 12 24 13 04 Samples Window Shades 2.1 G

342 12 24 13 06 Test Reports Window Shades 2.1

343 12 24 13 08 Manufacturer’s Instructions Window Shades 2.1

344 12 24 13 10 Operation and Maintenance Data Window Shades 2.1

345 12 24 13 11 Closeout Submittals Warranty 1.6 G

346 21 13 13.00 10 02 Shop Drawings Shop Drawings 1.4.3 G

347 21 13 13.00 10 02 Shop Drawings As-Built Drawings 3.8

348 21 13 13.00 10 03 Product Data Fire Protection Related Submittals 1.4.1

349 21 13 13.00 10 03 Product Data Materials and Equipment 2.3 G

350 21 13 13.00 10 03 Product Data Spare Parts 1.6

351 21 13 13.00 10 03 Product Data Preliminary Tests 3.7 G

352 21 13 13.00 10 03 Product Data Final Acceptance Test 3.8 G

353 21 13 13.00 10 03 Product Data Fire Protection Specialist 1.4.1 G

354 21 13 13.00 10 03 Product Data Sprinkler System Installer 1.4.2 G

355 21 13 13.00 10 05 Design Data Sway Bracing 1.4.3 G

356 21 13 13.00 10 05 Design Data Hydraulic Calculations 1.2.1.3 G

357 21 13 13.00 10 06 Test Reports Preliminary Test Report 3.7 G

358 21 13 13.00 10 06 Test Reports Final Acceptance Test Report 3.8 G

359 21 13 13.00 10 07 Certificates Inspection by Fire Protection Specialist 3.3 G

360 22 00 00 02 Shop Drawings Plumbing System 3.6.1 G

361 22 00 00 03 Product Data Fixtures 2.4

362 22 00 00 03 Product Data Water Heaters 2.9 G

363 22 00 00 03 Product Data Backflow Prevention Assemblies 3.6.1.1 G

364 22 00 00 06 Test Reports Tests, Flushing and Disinfection 3.6

365 22 00 00 06 Test Reports Test of Backflow Prevention Assemblies 3.6.1.1 G

366 22 00 00 10 Operation and Maintenance Data Plumbing System 3.6.1 G

367 23 00 00 02 Shop Drawings Detail Drawings 1.4.5

368 23 00 00 03 Product Data Insulated Nonmetallic Flexible Duct Runouts 2.9.1.1

369 23 00 00 03 Product Data Duct Connectors 2.9.1.1

370 23 00 00 03 Product Data Duct Access Doors 2.9.2

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

371 23 00 00 03 Product Data Fire Dampers 2.9.3

372 23 00 00 03 Product Data Manual Balancing Dampers 2.9.4

373 23 00 00 03 Product Data Diffusers 2.9.7.1

374 23 00 00 03 Product Data Registers and Grilles 2.9.7.2

375 23 00 00 03 Product Data Louvers 2.9.8

376 23 00 00 03 Product Data Air Vents, Penthouses, and Goosenecks 2.9.9

377 23 00 00 03 Product Data In-Line Centrifugal Fans 2.10.1.1

378 23 00 00 03 Product Data Ceiling Exhaust Fans 2.10.1.2

379 23 00 00 03 Product Data Variable Volume, Single Duct Terminal Units 2.11.1.1

380 23 00 00 03 Product Data Diagrams 1.2.1

381 23 00 00 03 Product Data Operation and Maintenance Training 3.13

382 23 00 00 06 Test Reports Performance Tests 3.11

383 23 00 00 06 Test Reports Performance Tests 3.13

384 23 00 00 06 Test Reports Damper Acceptance Test 3.9

385 23 00 00 08 Manufacturer’s Instructions Manufacturer's Installation Instructions 3.2

386 23 00 00 08 Manufacturer’s Instructions Operation and Maintenance Training 3.13

387 23 00 00 10 Operation and Maintenance Data Operation and Maintenance Manuals 3.13

388 23 00 00 10 Operation and Maintenance Data Fire Dampers 2.9.3

389 23 00 00 10 Operation and Maintenance Data Manual Balancing Dampers 2.9.4

390 23 00 00 10 Operation and Maintenance Data In-Line Centrifugal Fans 2.10.1.1

391 23 00 00 10 Operation and Maintenance Data Ceiling Exhaust Fans 2.10.1.2

392 23 00 00 10 Operation and Maintenance Data Variable Volume, Single Duct Terminal Units 2.11.1.1

393 23 05 93 01 Preconstruction Submittals TAB Firm 1.5.3.1 G

394 23 05 93 01 Preconstruction Submittals TAB team assistants 1.2 G

395 23 05 93 01 Preconstruction Submittals TAB team engineer 1.2 G

396 23 05 93 01 Preconstruction Submittals TAB Specialist 1.5.3.2 G

397 23 05 93 01 Preconstruction Submittals TAB team field leader 1.2 G

398 23 05 93 02 Shop Drawings TAB Schematic Drawings and Report Forms 1.3.3 G

399 23 05 93 03 Product Data Equipment and Performance Data 1.3 G

400 23 05 93 03 Product Data TAB Related HVAC Submittals 1.5.3.4 G

401 23 05 93 03 Product Data TAB Procedures 1.5.2 G

402 23 05 93 03 Product Data Calibration 1.5.2 G

403 23 05 93 03 Product Data Systems Readiness Check 1.3.3 G

404 23 05 93 03 Product Data TAB Execution 1.5.4 G

405 23 05 93 06 Test Reports Design review report 1.3.3 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

406 23 05 93 06 Test Reports Design review report 1.6.1.1 G

407 23 05 93 06 Test Reports Pre-Final DALT report 3.2.5 G

408 23 05 93 06 Test Reports Final DALT report 1.6.1 G

409 23 05 93 06 Test Reports Final DALT report 3.2.7 G

410 23 05 93 06 Test Reports TAB report 1.5.5.2 G

411 23 05 93 07 Certificates Advance notice of Pre-Final DALT field work 3.2.2 G

412 23 05 93 07 Certificates TAB Firm 1.5.3.1 G

413 23 05 93 07 Certificates Independent TAB Agency and Personnel Qualifications 1.5.1 G

414 23 05 93 07 Certificates DALT and TAB Submittal and Work Schedule 1.6.1 G

415 23 05 93 07 Certificates Design review report 1.3.3 G

416 23 05 93 07 Certificates Design review report 1.6.1.1 G

417 23 05 93 07 Certificates Pre-field TAB engineering report 1.6.1.2 G

418 23 05 93 07 Certificates Advanced notice for TAB field work 1.6.1 G

419 23 05 93 07 Certificates Prerequisite HVAC Work Check Out List 1.6.1 G

420 23 07 00 02 Shop Drawings Pipe Insulation Systems 2.3

421 23 07 00 02 Shop Drawings Pipe Insulation Systems 3.2

422 23 07 00 02 Shop Drawings Duct Insulation Systems 3.3

423 23 07 00 02 Shop Drawings Equipment Insulation Systems 3.4

424 23 07 00 03 Product Data Pipe Insulation Systems 2.3 G AFCE

425 23 07 00 03 Product Data Pipe Insulation Systems 3.2 G AFCE

426 23 07 00 03 Product Data Duct Insulation Systems 3.3 G AFCE

427 23 07 00 03 Product Data Equipment Insulation Systems 3.4

428 23 07 00 08 Manufacturer’s Instructions Pipe Insulation Systems 2.3

429 23 07 00 08 Manufacturer’s Instructions Pipe Insulation Systems 3.2

430 23 07 00 08 Manufacturer’s Instructions Duct Insulation Systems 3.3

431 23 07 00 08 Manufacturer’s Instructions Equipment Insulation Systems 3.4

432 23 09 23 01 Preconstruction Submittals Product data 1.04, A,B

433 23 09 23 02 Shop Drawings Direct Digital Systems for HVAC 1.04, A,B

434 23 09 23 06 Test Reports Site Testing Procedures 1.04, C

435 23 09 23 06 Test Reports Records 1.04, G

436 23 09 23 08 Manufacturer’s Instructions Training data 1.04, D

437 23 09 23 10 Operation and Maintenance Data Manuals 1.04, E

438 23 09 23 10 Operation and Maintenance Data Operating Instructions 1.04, F

439 23 64 10 03 Product Data Water Chiller 3.1 G

440 23 64 10 03 Product Data Water Chiller 3.1 G

441 23 64 10 03 Product Data Water Chiller 3.4.1 G

442 23 64 10 03 Product Data Water Chiller 3.4.1 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

443 23 64 10 03 Product Data Water Chiller 3.4.2 G

444 23 64 10 03 Product Data Water Chiller 3.4.2 G

445 23 64 10 03 Product Data Posted Instructions 3.6

446 23 64 10 03 Product Data Verification of Dimensions 1.5.1

447 23 64 10 03 Product Data MANUFACTURER'S MULTI-YEAR

COMPLETE UNIT WARRANTY 1.7

448 23 64 10 03 Product Data System Performance Tests 3.5

449 23 64 10 03 Product Data Demonstrations 3.6

450 23 64 10 06 Test Reports Field Acceptance Testing 3.4

451 23 64 10 06 Test Reports Water Chiller 3.1

452 23 64 10 06 Test Reports Water Chiller 3.4.1

453 23 64 10 06 Test Reports Water Chiller 3.4.2

454 23 64 10 06 Test Reports System Performance Tests 3.5

455 23 64 10 08 Manufacturer’s Instructions Water Chiller 3.1

456 23 64 10 08 Manufacturer’s Instructions Water Chiller 3.4.1

457 23 64 10 08 Manufacturer’s Instructions Water Chiller 3.4.2

458 23 64 10 10 Operation and Maintenance Data Operation and Maintenance Manuals 3.6 G

459 23 64 26 03 Product Data Grooved Mechanical Connections For Steel 2.2.2.4 G

460 23 64 26 03 Product Data Calibrated Balancing Valves 2.4.8 G

461 23 64 26 03 Product Data Pump Discharge Valve 2.4.9

462 23 64 26 03 Product Data Water Temperature Mixing Valve 2.4.10 G

463 23 64 26 03 Product Data Water Temperature Regulating Valves 2.4.11 G

464 23 64 26 03 Product Data Water Pressure Reducing Valve 2.4.12

465 23 64 26 03 Product Data Pressure Relief Valve 2.4.13

466 23 64 26 03 Product Data Combination Pressure and Temperature Relief Valves 2.4.14

467 23 64 26 03 Product Data Expansion Joints 2.5.9 G

468 23 64 26 03 Product Data Pumps 2.6 G

469 23 64 26 03 Product Data Combination Strainer and Pump Suction Diffuser 2.5.3

470 23 64 26 03 Product Data Expansion Tanks 2.7

471 23 64 26 03 Product Data Air Separator Tanks 2.8

472 23 64 26 06 Test Reports Piping welds NDE report 3.1.1.3

473 23 64 26 06 Test Reports Pressure tests reports 3.4.2 G

474 23 64 26 07 Certificates Employer's Record Documents (For Welding) 3.1.1.1

475 23 64 26 07 Certificates Welding Procedures and Qualifications 3.1.1.2

476 23 64 26 08 Manufacturer’s Instructions Lesson plan for the Instruction Course 3.5

477 23 64 26 10 Operation and Maintenance Data Calibrated Balancing Valves 2.4.8 G

478 23 64 26 10 Operation and Maintenance Data Pump Discharge Valve 2.4.9 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

479 23 64 26 10 Operation and Maintenance Data Water Temperature Mixing Valve 2.4.10 G

480 23 64 26 10 Operation and Maintenance Data Water Temperature Regulating Valves 2.4.11 G

481 23 64 26 10 Operation and Maintenance Data Water Pressure Reducing Valve 2.4.12 G

482 23 64 26 10 Operation and Maintenance Data Pressure Relief Valve 2.4.13 G

483 23 64 26 10 Operation and Maintenance Data Combination Pressure and Temperature Relief Valves 2.4.14 G

484 23 64 26 10 Operation and Maintenance Data Expansion Joints 2.5.9 G

485 23 64 26 10 Operation and Maintenance Data Pumps 2.6 G

486 23 64 26 10 Operation and Maintenance Data Combination Strainer and Pump Suction Diffuser 2.5.3 G

487 23 64 26 10 Operation and Maintenance Data Expansion Tanks 2.7 G

488 23 64 26 10 Operation and Maintenance Data Air Separator Tanks 2.8 G

489 23 73 13.00 40 02 Shop Drawings Installation Drawings 3.1 G

490 23 73 13.00 40 03 Product Data Equipment and Performance Data 2.1

491 23 73 13.00 40 03 Product Data Final Test Reports 3.2.2

492 23 73 13.00 40 07 Certificates Listing of Product Installations 1.3 G

493 23 73 13.00 40 07 Certificates Certificates of Conformance 1.3.1 G

494 23 73 13.00 40 07 Certificates Unit Cabinet 2.2.2 G

495 23 73 13.00 40 07 Certificates Fan 2.2.3 G

496 23 73 13.00 40 07 Certificates Drain Pans 2.2.4 G

497 23 73 13.00 40 07 Certificates Insulation 2.2.5 G

498 23 73 13.00 40 07 Certificates Plenums 2.2.6 G

499 23 73 13.00 40 07 Certificates Spare Parts 2.1 G

500 23 73 13.00 40 10 Operation and Maintenance Data Operation and Maintenance Manuals 3.3.1

501 23 73 13.00 40 11 Closeout Submittals Warranty 1.5

502 26 20 00 02 Shop Drawings Panelboards 2.10 G

503 26 20 00 02 Shop Drawings Marking strips 3.1.7.1 G

504 26 20 00 03 Product Data Receptacles 2.9 G

505 26 20 00 03 Product Data Circuit breakers 2.10.3 G

506 26 20 00 03 Product Data Switches 2.8 G

507 26 20 00 03 Product Data Manual motor starters 2.12 G

508 26 20 00 03 Product Data Grounding Busbar 2.14.3 G

509 26 20 00 03 Product Data Surge protective devices 2.19 G

510 26 20 00 06 Test Reports 600-volt wiring test 3.5.2 G

511 26 20 00 06 Test Reports Grounding system test 3.5.4 G

512 26 20 00 06 Test Reports Ground-fault receptacle test 3.5.3 G

513 26 20 00 10 Operation and Maintenance Data Electrical Systems 1.5.1 G

SUBMITTAL REGISTER

JOB NAME:

LOCATION:

CONTRACT NO:

CONTRACTOR:

APPROVING AUTHORITY

(d)

CONTRACTOR SCHEDULE

DATES

CONTRACTOR

ACTION

514 28 31 00 02 Shop Drawings System Components 1.02, A

515 28 31 00 08 Manufacturer’s Instructions All Components Used 1.02, B

516 28 31 00 01 Preconstruction Submittals Equipment 1.02, C, D

517 28 31 00 10 Operation and Maintenance Data Manuals 1.02 ,B

518 28 31 00 07 Certificates Qualifications of Installer 1.02, E

St andar d Sect i ons 01 SECTION01

SECTI ON 01 35 13

SPECI AL PROJECT PROCEDURES

11/11

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o wi t hi n t he t ext by t he basi c desi gnat i on onl y.

U. S. FEDERAL AVI ATI ON ADMI NI STRATI ON ( FAA)

FAA AC 150/ 5300- 13 ( 2012; Rev A; Change 1 2014) Ai r por t Desi gn

FAA AC 70/ 7460- 1 ( 2007; Rev K) Obst r uct i on Mar ki ng and Lighting

1. 2 DEFINITIONS

1. 2. 1 Landi ng Ar eas

" Landi ng Ar eas" means:

a. The pr i mar y sur f aces, compr i s i ng t he sur f ace of t he r unway, r unway shoul der s, and l at er al saf et y zones. The l engt h of each pr i mar y sur f ace i s t he same as t he r unway l engt h. The wi dt h of each pr i mar y sur f ace i s 2000 f eet ( 1000 f eet on each si de of t he r unway cent er l i ne) .

b. The " c l ear zone" beyond t he ends of each r unway i s t he ext ensi on of t he pr i mar y sur f ace f or a di st ance of 3000 f eet beyond each end of each runway.

c. Al l t axi ways, pl us t he l at er al c l ear ance zones al ong each si de f or t he l engt h of t he t axi ways ( t he out er edge of each l at er al c l ear ance zone i s l at er al l y 250 f eet f r om t he f ar or opposi t e edge of t he t axi way ( exampl e: a 75 f oot wi det axi way must have a combi ned wi dt h and l at er al c l ear ance zone of 425 f eet .)

d. Al l ai r cr af t par ki ng apr ons, pl us t he ar ea 125 f eet i n wi dt h ext endi ng beyond each edge al l ar ound t he apr ons.

1. 2. 2 Saf et y Pr ecaut i on Ar eas

“ Saf et y Pr ecaut i on Ar eas” means t hose por t i ons of appr oach- depar t ur e c l ear ance zones and t r ansi t i onal zones wher e pl acement of obj ect s i nci dent t o cont r act per f or mance mi ght r esul t i n ver t i cal pr oj ect i ons at or above t he appr oach- depar t ur e c l ear ance, or t he t r ansi t i onal sur f ace.

a. The “ appr oach- depar t ur e c l ear ance sur f ace” i s an ext ensi on of t he pr i mar y sur f ace and t he c l ear zone at each end of each r unway, f or a di st ance of 50, 000 f eet , f i r st al ong an i ncl i ned ( gl i de angl e) and t hen al ong a hor i zont al pl ane, bot h f l ar i ng symmet r i cal l y about t he r unway cent er l i ne ext ended.

SECTI ON 01 35 13 Page 1

( 1) The i ncl i ned pl ane ( gl i de angl e) begi ns i n t he c l ear zone 200 f eet past t he end of t he r unway ( and pr i mar y sur f ace) at t he same el evat i on as t he end of t he r unway. I t cont i nues upwar d at a s l ope of 50: 1 ( 1 f oot ver t i cal l y f or each 50 f eet hor i zont al l y) t o an el evat i on of 500 f eet above t he est abl i shed ai r f i el d el evat i on. At t hat poi nt t he pl ane becomes hor i zont al , cont i nui ng at t hat same uni f or m el evat i on t o a poi nt 50, 000 f eet l ongi t udi nal l y f r om t he begi nni ng of t he i ncl i ned pl ane ( gl i de angl e) and endi ng t her e.

( 2) The wi dt h of t he sur f ace at t he begi nni ng of t he i ncl i ned pl ane ( gl i de angl e) i s t he same as t he wi dt h of t he c l ear zone. I t t hen f l ar es uni f or ml y, r eachi ng t he maxi mum wi dt h of 16, 000 f eet at t he end.

b. The “ appr oach- depar t ur e c l ear ance zone” i s t he gr ound ar ea under t he appr oach- depar t ur e c l ear ance sur f ace.

c. The “ t r ansi t i onal sur f ace” i s a s i deways ext ensi on of al l pr i mar y sur f aces, c l ear zones, and appr oach- depar t ur e c l ear ance sur f aces al ong i ncl i ned pl anes.

( 1) The i ncl i ned pl ane i n each case begi ns at t he edge of t he sur f ace.

( 2) The sl ope of t he i ncl i ne pl ane i s 7: 1 ( 1 f oot ver t i cal l y f or each 7 f eet hor i zont al l y) . I t cont i nues t o t he poi nt of i nt er sect i on wi t h t he:

( a) I nner hor i zont al sur f ace ( whi ch i s t he hor i zont al pl ane 150 feet above t he est abl i shed ai r f i el d el evat i on) ; or

( b) Out er hor i zont al sur f ace ( whi ch i s t he hor i zont al pl ane 500 feet above t he est abl i shed ai r f i el d el evat i on) , whi chever i s applicable.

d. The “ t r ansi t i onal zone” i s t he gr ound ar ea under t he t r ansi t i onal sur f ace. ( I t adj oi ns t he pr i mar y sur f ace, c l ear zone, and appr oach- depar t ur e c l ear ance zone. )

1. 3 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on; :

SD- 01 Pr econst r uct i on Submi t t al s

PART 2 PRODUCTS

2. 1 AI RFI ELD OBSTRUCTI ON LI GHTS

Ai r f i el d obst r uct i on l i ght s must conf or m t o FAA AC 70/ 7460- 1 and have r ed or whi t e l enses.

SECTI ON 01 35 13 Page 2

PART 3 EXECUTI ON

3. 1 HAZARDS TO AI RFI ELD OPERATI ON

I n addi t i on t o " DFARS 252. 236- 7005, Ai r f i el d Saf et y Pr ecaut i ons, " t he f ol l owi ng par agr aphs appl y.

3. 1. 1 Oper at i ons on t he Ai r f i el d

a. Fl i ght l i ne Dr i v i ng: A Hur l bur t Fi el d Fl i ght l i ne Dr i v i ng Li cense i s r equi r ed t o oper at e a vehi c l e on t he ai r f i el d. The l i cense and hal f - day t r ai ni ng wi l l be pr ovi ded f r ee of char ge by Hur l bur t Fi el d Base Oper at i ons. The oper at or cannot be r ed- gr een col or bl i nd.

b. Fl i ght l i ne Access: Check i n and check out wi t h t he Ai r f i el d Oper at i ons Di spat cher dai l y .

- Dur i ng check- i n, advi se t he di spat cher of i nt ended wor k ar eas and t ype of wor k schedul ed.

- Whi l e on any r unway, t axi way, or appr oach ar ea, i mmedi at el y r emove any di r t , debr i s , or ot her mat er i al spi l l ed or caused by t he Cont r act or ’ s oper at i ons.

- Dur i ng check- out , br i ef t he di spat cher on compl et ed wor k and st at us of any ai r f i el d f aci l i t i es af f ect ed by t he wor k.

c. Ai r f i el d Communi cat i ons: Mai nt ai n communi cat i ons wi t h Base Oper at i ons and t he ai r t r af f i c cont r ol t ower at al l t i mes wi t h a r adi o pr ovi ded by Base Oper at i ons.

- Fur ni sh al l wor k gr oups wor ki ng wi t hi n 100 f eet of a r unway wi t h wal k i e- t al k i e r adi os t uned t o t he r amp net f r equency, t o be pr ovi ded by t he…