Attachment 3 - SON Strobes and PAPI Rev 1 Dated 16 Mar 2022.pdf
PDF 312 KB Posted
- Attached to
- Airfield Strobe and PAPI Light Equipment Federal contract opportunity
- Solicitation number
- FA302222Q0311
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| COMBO FA302222Q0311 Airfield PAPI and Strobe Equipment_revision 3 Post.pdf | ||
| COMBO FA302222Q0311 Airfield PAPI and Strobe Equipment_revision 2 Post.pdf | ||
| Att 4 - Crouse Hinds Brand Name Justification Rev 1 Redacted.pdf | ||
| COMBO FA302222Q0311 Airfield PAPI and Strobe Equipment_revision 1 Post.pdf | ||
| Attachment 4 - Crouse Hinds Brand Name Justification Redacted.pdf | ||
| Attachemnt 2 - Provisions and Clauses.pdf | ||
| COMBO FA302222Q0311 Airfield PAPI and Strobe Equipment.pdf | ||
| Attachment 3 - SON Strobes and PAPI.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DEPARTMENT OF THE AIR FORCE
HEADQUARTERS 14TH FLYING TRAINING WING
COLUMBUS AIR FORCE BASE MISSISSIPPI
16 March 2022
On December 08, 2021, Columbus AFB, MS experienced a storm with heavy lightning.
This storm produced a lightning strike that entered the electrical circuit feeding the Strobe lights and PAPI (Precision Approach Path Indicator System) guidance system on the north end of our center runway. The damage to these circuits was discovered during our early morning inspection the on December 09, 2021.
The equipment destroyed due to this lightning strike is listed below and is required to restore the system to original operating conditions. CAFB technicians will install all listed material.
1. Power Converters that produces high voltage pulse to the strobe lights. This lighting system guides the jets on approach during inclement weather and at night.
Manufacture – Flash Technology Part # F1737150/ PC 800-4A 120v Quantity Required – (21)
2. Constant Current Regulator drives the current through the circuit from the Lighting Vault out to the strobe light system and the PAPI system.
Manufacture – Crouse/Hinds Part # 82860PRS-480-04-3-P Quantity Required – (1)
3. Electronic Control board inside the PAPI controls the tilt switch that guides the jet on approach by communicating the slope angle to the pilot.
Manufacture – Crouse /Hinds Part # 27037 C/H Tilt Switch Quantity Required – (4)
4. Transformer receives voltage from the regulator at the vault and allows 6 steps of intensity from the strobe and PAPI lights.
Manufacture – Integro Part # 11736 INT L830-10, 300watt 6.6 @ 6A Iso. Transformer Quantity Required – (8)
5. FOB Destination
File details come from the government source that posted it. Updated .