6. SSMD-2mm Salient Characteristics.pdf
PDF 54 KB Posted
- Attached to
- Solid State Media Disintegrator - 2MM
- Solicitation number
- FA301626Q0232
About this file
This document is a specification for a Solid State Media Disintegrator-2MM that details the salient characteristics and technical requirements for procurement of this equipment.
The disintegrator must be NSA-evaluated and listed on the Evaluated Products List for Solid State Media Disintegrators (EPL-SS) and approved for physical destruction of solid state media including memory cards, thumb drives, circuit cards, SSDs, enterprise drives, and internal components in mobile devices, as well as optical media such as CDs and DVDs, reducing materials to 2mm particle size. The device must accept media up to 0.9 inch by 8.5 inches and feature simple automatic push-button operation with internal overload sensing that automatically reverses to prevent jams and an automatic bin-full sensor. Technical specifications include an acoustic level below 85 decibels, Life-Extend or equivalent easily replaceable destruction blades, grinders and screens, and a self-contained 3-phase air filtration system with pre, carbon, and HEPA filters. The unit must accommodate a lockable main power switch for Lockout/Tagout compliance, operate on 200-240V single phase at 50/60 Hz requiring 6 amps, measure no greater than 27.5 inches by 43 inches with a height not exceeding 49 inches, weigh no more than 1,200 pounds, and include castor wheels for mobility. The manufacturer or vendor must provide a 1-year warranty covering parts, labor, shipping, and onsite service where available, or alternatively cover costs for factory repair or equipment replacement; additional warranty extensions are available in 1-year increments.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solid State Media Disintegrator-2MM
Salient Characteristics
• Device must be listed in the National Security Agency (NSA) Evaluated Products List-Solid State Media Disintegrators
(EPL-SS).
• Disintegrator must be evaluated and approved by the National Security Agency for the physical destruction of solid state media, such as memory cards, thumb drives, circuit cards in solid state drives and solid state enterprise drives, internal components in cell phones and tablets, as well as optical media, such as CDs and DVDs to 2mm particle size.
• Device must accept media up to 0.9 inch by 8.5 inches.
• Device must be simple, automatic push-button operation.
• Device must have an internal brain to sense overload and momentarily reverse automatically to clear and prevent jams.
• Device must have an automatic bin-full sensor.
• Device must have Life-Extend® or equal destruction blades, grinders and screens that must be easily reused, adjusted and replaced.
• Device acoustics must be less than 85 dB.
• Device must use a self-contained, 3-phase air filtration system consisting of pre, carbon and HEPA filters.
• Device’s MAIN power switch must be able to accept a lock for Lockout/Tagout in the OFF position.
• Device must have a footprint no greater than 27.5 inches x 43 inches with a height no taller than 49 inches for space considerations.
• Device must not weight more than 1,200 lbs.
• Device must have castor wheels.
• Device must be 200-240V, 1 phase, 50/60 Hz, 6A.
• Device must have a 1 year warranty in which the manufacturer/vendor will furnish parts and labor, shipping and on-site service, where available. If on-site service is not appropriate, manufacturer/vendor will cover the cost of shipping back to the factory for repair or swap the equipment with a replacement at no additional charge to the customer. After the initial period, warranties can be extended in 1 year increments.
File details come from the government source that posted it. Updated .