Adjustable Monitor Lift -Questions and Answers.pdf

PDF 181 KB Posted

Attached to
ADJUSTABLE MONITOR LIFTS
Solicitation number
FA301624Q0027
Issued by

About this file

Written by GovTribe AI ·

This document contains questions and answers related to a federal solicitation for adjustable monitor lifts. The solicitation is from the 37th Training Support Squadron at Joint Base San Antonio Lackland in Texas and seeks eight adjustable monitor lifts to be installed in two classrooms on the second floor of building 9225. The monitors must meet the overall dimensions specified in the statement of work but rectangular or rounded corners are acceptable. The loading dock is approximately 60 yards from the installation location and does not support forklift use, though there is an elevator that can transport cargo. The contractor will be responsible for offloading, installation, packaging removal and waste disposal in accordance with the terms specified in the solicitation.

View the file

Other files

File Type Posted
Adjustable Monitor Lift -Questions and Answers.docx DOCX document
Attachment 2 - Layout_Adjustable Monitor Lift.pdf PDF
RFQ - FA301624Q0027 Adjustable Monitor Lifts.pdf PDF
Attachment 1 - Statement of Work dated 4 Jan 24.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

502 CONS/JBKAE FA301623Q0027

JBSA Lackland, TX 78236 Adjustable Monitor Li�s 37 TRSS/DOR

QUESTIONS & ANSWERS: Cutoff date for contractor questions is 2:30 P.M. CST, 6 March

Question 1: Are monitors lifts required to be sourced from a TAA-compliant country, or are lifts from non-TAA countries also acceptable

Government Response: Due to estimated dollar thresholds IAW the FAR do not have to meet TAA.

However, products do have to meet Buy American Act standards.

Question 2: confirm the requested monitor lifts are the rectangle design, correct? The PWS shows both rectangle and round

Government Response: There are overall dimensions in the Statement of Work that must be met.

Where the corners are round or rectangular is of no matter to the end-user.

Question 3: Approximately how far is it from the loading dock to the install location?

Government Response: Approximately 60 yards.

Question 4: . Are there any stairs that the product will need to go up or down to reach the truck location? If so how many?

Government Response: There are no stairs.

File details come from the government source that posted it. Updated .